Already knew you was going to Live Wire! That's the spot! My brother Joe does all the installs there! You in my hood!! 💪🏻

Damn I wish we had a store like that man ,i hate ordering off Amazon 😒 like picking things up myself when im spending money 😂

Curious have you tried taking the first EQ apart and running some contact cleaner like DeoxIT through the volume knob??

Just curious, why do u choose an eq over a dsp?

Fire video had so much info in it

ok so i took this kinda into consideration for what i got i have big 4 under hood and 1 run of 0 to the back into fuse then to the ds5100 xs power i from there have 2 grounds a frame and a body then one that goes to amp and same on positive 0 in and then going straight to amp i have stock alt and the amp is a taramps bass 3k the clip light use to go crazy so i upgraded the 4g from battery to amp with 0 to a 0-4g reducer and boom problem solved now she only clips on them really low lows. thank you so much! in time i will upgrade alt but this should do for now till i get her

Good content like always bro 💯

@mouse_trap.

9 ай бұрын

Appreciate you stopping by early and checking video out! 🔈🔈🤌🏻🤌🏻

@austinhenry8814

9 ай бұрын

​@mouse_trap. Didn't know a huge store like that was around thanks for the info.

Love me s9me jp Korean amps!! I Got 2 jp 83s and dizzam!! Great vid bro

@jasonschreiber6458

2 ай бұрын

Jp amps sounds terrible. Subs mabye, but they have a ton of noise. P.s. clear plastic lets all radio interference through. That bottom cover is doing you no favors. I bought a jp95 and nothing but regrets

Audio heaven 🔊🔥🔥🔥

🔊 🔊 🔊 To distribute the power effectively is a good idea to run all the power wires to a buss bar, from the buss bars to the alt + and -

@mouse_trap.

9 ай бұрын

Oh ya! 🔈🔈🔈

@KINGxxLxxCHOP

3 ай бұрын

The most effective way to run 12v ideally is straight from the source without busbars or distribution blocks but nit always possible obviously. But next best is to get muti-output terminals for your lithium/AGM batteries and again avoid distribution blocks or busbars and have straight complete runs without any roadblocks between 12v source and amplifier. But distribution blocks or busbars work but you will always lose a little something having to use them. But in some builds the fact it simplifies running to multiple sources (amps ect) is totally worth the small voltage/amperage loss! Even now I'm currently running buspars in my build. I also run 3 amps so simplicity and less headache for me 100% worth it for this build lol. But first video from this guy I have seen on here, very much enjoyed seeing how the bass hunt day unfolded from garage to stores lol ill definitely subscribe and check back in!

You still using agms?

That's a bassheads candy store! Have ever considered stepping up to a dsp Mouse?

whats the name of the beat

Are you planning on getting a Timpano eq for the outside speakers as well? (Just asking) MTG stand up!

@mouse_trap.

9 ай бұрын

Oh ya most definitely!

You should pick up an oscilloscope and make sure the input and output signals aren’t clipping, from the head unit back to the amp output.

@Dav.vid1

9 ай бұрын

@titoham-DCXLs oh ok lol, that’s why I run Fosgate, tho I do have Skar in my truck that’s not bad.

@pedrocarlito4498

9 ай бұрын

How do you do that?

@Dav.vid1

9 ай бұрын

@@pedrocarlito4498 this one’s pretty good kzread.info/dash/bejne/oXaCp7araaSup6Q.htmlsi=htHZ_Why82iosx5e

@TellyKennyButters

9 ай бұрын

@@Dav.vid1 hahahahahahahah you said so many wrongs things is this comment... yeah that's why I run fosgate.... but I got a couple skars 😂🤣😂🤣😂😂🤣🤣😂🤣 you cheap as shit trying to say you run rockford... that's sad.

@TellyKennyButters

9 ай бұрын

@titoham-DCXLs the older models yes and it's actually 1.7v😎 is the sweet spot and with the newer models that's a long thing of the past 🤣😂 do some research before you try giving by knowledge

Hey boss im new to the Taramps game. I have the same truck. 4 skar 8s running about 400 rms each sub. I have 2 XS Power batteries on the stock alternator and im still clipping. I have a taramp bass 3k so im wondering what i can do to stop clipping. Im nowhere near maxing out the amp so I know theres more i need to do. I still see 9-10v when i clip so im forsure drawing lots of power. Would i need an alternator upgrade since my volts go down so much?

@yung_flacco9679

Ай бұрын

Im having same issue i was told to get a bigger battery please lmk if u fix issue

Wiring, I kinda like wiring. Great vid mouse, bass on peace

@mouse_trap.

9 ай бұрын

Ya wiring is my thing I love it..have a blessed Sunday big dog

Check RCA voltage set mine around 1.8 - 1.9 runnin a smart 8 on 2 custom zv5 15s and its a beast of an amp just a bit finicky to setup

@MM-ej3df

3 ай бұрын

How do I adjust my RCA voltage

Great video mouse! Straight up . I was trying to figure the best way to wire my yukon and my 3 18s build. Always had problems with clipping from scar kicker. Anything I used. This should fix all of it. Also I wanted to ask you have tou ever had any of the stedson products? Supposed to be a few people who were working with taramps and did there own thing. I want a px2 taramps dsp bit stedson has a version too. What do you think of their 8 channel dsp in a 02 yukon with 8vto 10 channels or 11. 3 subs. Or the device itself?

@mouse_trap.

9 ай бұрын

I got a boy who does everything Setson ima ask him what’s good on dsp and drop a video on setting a setson dsp

Buy a Korean board amp brother you will love it big difference also do lithium maybe some yinlongs a small cmax bank

& 11:08… Good for you man & good point🤔😂

Get the Gravity GR-EQP11 Digital Bass Machine. All my friendsa laughed at me when i got one. Now they all have one. The price will go up once people catch on to them.

How do you run multiple subs with one terminal on the amp that has speaker inputs wires? Do you run the subs in series or parallel?

No way you're from tampa, I skipped through and saw the store layout and was like dam that looks like livewire lmao

I go to Tampa every year for Christmas. I'm from there. I'm going to check this store out next time I'm there. I'm kinda new to Taramps. Have 2 smart bass 3ks going to 2 Avatar stu 12s. Gonna go with the smart bass 5ks soon. Also maybe try using ferrules. I get the 18mm ferrules on ferrules direct. You won't have to worry about loose strands like on that one terminal. Just a suggestion

i have the same amp running dual 0 gauge direct from its own lithium 100ah battery about a foot away. i have turned my rca on the head unit right down too and also have my rca bass knob at half and it still clips at like half its rated power... my subs want 2000 rms each minimum so thought it was the perfect amp for the 2 subs but cant even get that without clip light flashing. anyone have any other ideas? good video still!! cheers

@mouse_trap.

9 ай бұрын

Get a DBlock FEED as many Power Wires as possible to it

@haydensmith9064

9 ай бұрын

@@mouse_trap. thanks i do already and have dual 0 AWG all way from battery to amp off small buss bars and through a smd fuse block about a foot long distance in total too?

@haydensmith9064

9 ай бұрын

@titoham-DCXLs ill have another look when i get home but im sure it was only about 2v down from 7 or something it was set on when new

@haydensmith9064

9 ай бұрын

@titoham-DCXLs awesome ill double check that and fingers crossed thats all it is. cheers for the help 👌

Thats a bad ass store

@mouse_trap.

9 ай бұрын

And they got everything in stock 🔈🔈🔈😬

Everything you add to your system ads more noise and puts you closer to clipping

Timpano got a new eq is 10v.

Yes a bigger alternater will make a bid difference

Let me know witch one is better

@mouse_trap.

9 ай бұрын

I got u

The clip light will not always blink if you tune them correctly. Lol. Taramps, and most other Brazilian style amps, only need about .9 to 1.2 input voltage on the RCAs to make power. Anymore than that and they will clip with little or no gain. Adjust your input voltage properly and set the gain clean with an Oscope and that little clip light will never blink... 🤷‍♂️

@MM-ej3df

3 ай бұрын

@phatboi1282 how do I adjust the input voltage? My amp keeps clipping when I turn my radio up higher someone told me I could be getting too much input voltage, but I don’t know how to fix that

@phatboi1282

3 ай бұрын

@@MM-ej3df Should have a sub level on your head unit. Under speaker level. Turn it down into the negative numbers. You can check the voltage with a multimeter. Touch the positive to the tip of the rca and the negative tonthe shield.

@MM-ej3df

3 ай бұрын

@@phatboi1282 I don’t have a sub level setting I’m using my factory stereo. I have 2013 Ford Explorer, im getting my RCA’s off of a line-output converter

@phatboi1282

3 ай бұрын

@@MM-ej3df then the loc should have a gain adjustment on it.

@MM-ej3df

3 ай бұрын

@@phatboi1282 what do you mean by the loc? Or could it be that I need to change my wiring to 0 gauge instead of 4 gauge

💪🏼💪🏼🦍

My audio shop is the size of a big closet..i would have a dam heart attack....would never get me out.

I gotta drive 45 minutes for some 0 gauge terminal connectors, those things are hard to find unless you order them. and I'll never order anything when it comes to subs I want my shit asap

@jaybomb5022

4 ай бұрын

Or Amazon but 🤷🏾‍♂️

Amps ground to the chassis and nothing else and it doesn't matter what brand it is. If you set your gains right you won't be clipping it's not the equipment it's the installer

@tgfdagoatlogan4177

4 ай бұрын

What so I set my amp to for lows and highs?

@jaybomb5022

4 ай бұрын

Mine grounds to my big ass lithium bank, that bank grounds to thr chassis. No issues whatsoever, more than one way to skin a cat past 5k rms 😂

What about your alternater

@mouse_trap.

9 ай бұрын

One coming soon!!!

👍👍👍...🔈🔈🔈

@mouse_trap.

9 ай бұрын

We grindin 🔈🔈🔈🎶🎶

Not to be a total smart ass but those are most likely tin platesd copper. You have to do a scratch test or a magnet test if you think it's solid tin or something else ferrous.

you know you can buy copper pipe and cut it up squash one and drill it out make copper terminals

I quit messing with taramp cause I had one to catch fire on me

@mouse_trap.

9 ай бұрын

That’s crazu

@johnoates3326

9 ай бұрын

Same here while I was driving and I will never run taramp again

@TellyKennyButters

9 ай бұрын

@@johnoates3326 any amp will do that it's called user error haha you had it running to low of an ohm and was probably feeding 8g. So yeah it will 🤣😂

@TellyKennyButters

9 ай бұрын

That's all user error they have a great reputation just not with idiot installers like yourself 😂🤣🤷‍♂️

@johnoates3326

9 ай бұрын

@@TellyKennyButters lmao no I have 2 extra batteries a 290 alt and zero gauge lmao but ok in my over 20 years of car audio I've only had 1 amp catch fire and it was that taramps and it was a 1 ohm version I had at a 2 ohm final load but say what u want when u have no idea what I have or what I'm running ok lmao

I just found new store 20 m'inscrire away

Stick to quality

Smd DD -1

i was watching enjoying your video, until you talked trash about mustangs. i wont be watching anymore

@onesikm3

8 ай бұрын

LOL why you so upset bro 😂

@danielekuere9533

8 ай бұрын

@@onesikm3 he hating on mustangs and the drivers... thats lame

@matt6951

8 ай бұрын

​@@danielekuere9533bye.

That pride sub

Or buy a real amp those fkn blow levels dive hard under 50hh their poop all day

@fintansky9369

9 ай бұрын

An amp is an amp

@txddyfarquh3916

9 ай бұрын

​@fintansky9369 | zapco, Alpine, Helix, Ground Zero.. their expensive for GOOD reason. Each to their own BUT...... Taramps nor Timpano is even close to that Level of high quality build so not every Amp is just an amp lol