I have had my ITTP probe for over a year now and I simply LOVE it! I show it off in all my videos. You delivered a great tool. Thank you.

@Threadexpress

2 жыл бұрын

Hi Tim. Thanks for the feedback! I will put that on the Hallmark website testimonials page (unless you request not). Good to hear of and subscribe to your KZread channel. kzread.info/dron/nrsEPX6_IuOR2JXa7VjKJQ.html If you get a chance send me an email sometime. (via about or website above) Cheers, Cliff

I stared at my broken 4-40 tap in that little hole. Silly me. I should have watched your video prior to my all thumbs approach. Time to fire up the lathe and make those little tools! Thank you so much. Cheers!

@Threadexpress

Жыл бұрын

Cheers! Cliff

Tiny tapping graduate level course! Spot on! You always have very thorough and helpful tips on machining! Thank you for sharing all of this very useful stuff! Much appreciated! :)

@Threadexpress

2 жыл бұрын

Thanks for the feedback Art! Cliff

Hi, Good idea using the D bit for making a centre with a nice lead in. Looking forward to a year of informative videos. Thanks.

@Threadexpress

2 жыл бұрын

Thanks for the feedback Dave! Cliff

I’m going to be drilling and tapping for m3 threads. And I don’t even have a drill press or anything 😕

@Threadexpress

Жыл бұрын

Ok....!

Talk about being out of my league. Sitting here with my 8/32 tap in hand hoping to tap a less than 1/4" depth hole or spend $500 and just replace something. And I said lets see how this is done. And I came here. So obviously tapping something by hand this small is out of the question.

@Bobo-ox7fj

Жыл бұрын

Not in the least. I tap holes to M3-M6 with a drill all day at work. But where possible I try to do the M3s by hand. It also depends on your material.

I tried to find the video on sharpening taps and I gave up. May I use a drenel? I can destroy even 3/16 taps...

@Threadexpress

3 ай бұрын

You probably could, but a well dressed sharp fine grinding wheel is easier. Cliff

Hi Cliff......oh yes, a very useful attachment for my ITTP.........I can use it on my pretend Bridgeport when machining Delrin. Please send me an invoice. Yay!

@Threadexpress

2 жыл бұрын

Thanks for your positive response! Lets hope I get more feedback like that, so I can make it a new product! Cheers Cliff

Very useful video. I didn't understand how the knurled disk applies torque to the round part of the tap if the disk also has a round hole unless its a press fit which could be tricky?

@Threadexpress

2 жыл бұрын

Hi - Oh I should have mentioned the set screw in the side! I wonder how many others are wondering that! Cheers Cliff

what stops the circular tap wrench from slipping on the tap? how does it grip the tap? also what size drill for 1mm tap, have some copper to tap 1mm any issues to be aware of? thanks

@Threadexpress

Жыл бұрын

Hi. Sorry I forgot to mention a set or grub screw is used to grip on the shank. Cheers. Cliff.

@namenotshown9277

Жыл бұрын

@@Threadexpress no probs, I could see the grub screw holes in some views, so thought that was the case....ty