I've been doing tumblers for a while, and I just recently considered taping the tops and bottoms. You answered pretty much every question I had. Thanks! And the designs on the tumblers you were working on were amazing! I'll have to see your other videos to see how you did that. Wow!

Excellent video. Thank you!!

excellent information

Awesome!!! Thanks a lot!!! I want to start leaving a seem because I m afraid that some people get water in it if I don’t seal it right. It’s easily to not seal it right way if going all the way up.

Thank you so much for this video!!!🙏🏽🙏🏽🙏🏽🙏🏽👍🏽👍🏽👍🏽👍🏽❤️❤️❤️❤️❤️❤️

The only thing I like about this taping off from bottom is when people drop it to hard they can crack, so seeming off like this for some is a great idea! I am doing a cpl right now, one being for my daughter who always drops things, this is great for people like her.. I do love to do the fully top to bottom but I'm gonna see how this works for a change.. Thanks for the tidbit!

Put you put in side the tumbler cup ?

What did you put in your epoxy to make it bling? I didn't catch that.

@JMARIEDESIGNED

6 жыл бұрын

I add some glitter to my epoxy. It is Magnolia from FeatherBear Bling.

How did you do your glitter technique. I love it

@JMARIEDESIGNED

4 жыл бұрын

Hey Cherrelle, look at my videos for Glitter Flow

How much epoxy of A and B together? That only i have on my glasses tumbler

Hi! When you take the tape off your cups do you do them twice? First and second coat?

@JMARIEDESIGNED

5 жыл бұрын

Briana, I pull and retape at each step in my process.

Do you keep the tape on while you’re painting, mod podge, glitter? Pull it off while it dries? Then put it back on to epoxy? I’m a newbie lol.

@JMARIEDESIGNED

5 жыл бұрын

Hey Jackie. I tape off and then paint. I pull the tape and reapply for loctite and glitter, and seal. (I don't use mod podge). Then pull the tape and retape before epoxy. Then I pull it off after about 10-15 minutes of epoxy application. Hope that helped.

Jana, 2 questions please. Would you do a quick instructional video on how you do your molds to add as gifts? Also, would you mind sharing the colors again on the tumbler we just watched you epoxy? Thank you and it’s beautiful. Oh and 3rd question, what type of tripod do you use for your phone to be able to manipulate it like you do. Thanks again.

@JMARIEDESIGNED

6 жыл бұрын

I will do a video on the keychains. The colors on the glitterflow cup were from Iconnectwithglitter (coral, cotton candy, sky blue) and the yellow was one someone had given me. The tripod is a Gorilla pod from Amazon. www.amazon.com/gp/product/B005HY4U4Q/ref=oh_aui_search_detailpage?ie=UTF8&psc=1With this cell phone attachment. www.amazon.com/gp/product/B005HY4U4Q/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

@tamitrull8197

6 жыл бұрын

Thank you so very much. I have heard about the molds and making keychains and would love to see how it works. I do appreciate it. I think that’s the same tripod I ordered but it wouldn’t hold my iPhone having a case on it. I thought there might be another option. Thanks for sharing the link.

Thank you for this! My only question is, I tried this and my top and bottom edges were rough, like I didn’t get enough epoxy on them..even though I rubbed just those areas at times...do you tape right at the line or do you leave a little teeny tiny stainless steel showing...

@JMARIEDESIGNED

5 жыл бұрын

I do leave just a smidge of a gap between the glitter and the tape, so I get a good seal of the epoxy to the stainless. Maybe 1/16" it isn't much at all. Just enough that the epoxy is sealed to the stainless and that helps eliminate any rough edges on the glitter, too. Hope that helped.

@melaniegonzales1566

5 жыл бұрын

Thank you for the response! As far as if I wanted to glitter my whole tumbler...how would you suggest I tape the rim?

Do you pull the tape after spray paint? If you use modpodge to apply glitter do you pull tape right after that as well? Sorry but I am new to this. I do not sell I make for myself friends an family. Thanks hugs Sheryl 💙🎨💙

Do you tape all of your cups or do you do full top to bottom glitter?

@JMARIEDESIGNED

5 жыл бұрын

Hey Kourtney, I tape off probably 99% of my tumblers. I rarely do full top to bottom glitter. Personal preference, mostly, but also that is just the style I offer.

How do you remove epoxy that has smudged back onto the silver rim? I always get some epoxy under my tape where they connect, sometimes it's really thin but, should I use acetone to remove it? I don't think that cutting it off would work for such a thin smudge and I'm afraid of scratching the pretty rim that I created... Thoughts?

@JMARIEDESIGNED

4 жыл бұрын

Katie Torres it is still thin enough when I pull tape that if there is a bit that got under where the tape meets up, I just use a baby wipe and clean it off.

Do you sell your creations?!? Where can I get one?!? :)

@JMARIEDESIGNED

6 жыл бұрын

Kelli Ann Courtney I do. I am J.Marie Designed on Facebook. You can message me there. I am also JMarieDesigned on Etsy.

This is electrical tape?

How do you get the bubbles out of the epoxy when mixing

@JMARIEDESIGNED

5 жыл бұрын

Yashira Cruz I stir slowly and for a couple minutes. I have recently found that using a baby bottle warmer to warm the thicker part has helped reduce bubbles

@yashiracruz3335

5 жыл бұрын

Thank you. Do you have a video on how to make your turner?

@JMARIEDESIGNED

5 жыл бұрын

Yashira Cruz my husband made this one, but I have since changed to a Kraken mini Rotisserie. They are on Etsy.

@yashiracruz3335

5 жыл бұрын

Jana Mays thank you

Where do you get your spinning machine?

@JMARIEDESIGNED

5 жыл бұрын

My husband built this one, but I now have a new one from The Kraken Mini Rotisserie on Etsy that I absolutely love!

WHAT DO YOU MEAN YOU MIX A & B FOR EPOXY..

@janamays2460

4 жыл бұрын

EPOXY COMES IN TWO PARTS... A & B

@Delfy-xk3ws

4 жыл бұрын

@@janamays2460 Thank u so much...Do they both come in tye same box or do i have to buy them seperate...

@janamays2460

4 жыл бұрын

@@Delfy-xk3ws They should always come together. One won't work without the other. I use Counter Culture DIY now. Their Artist Resin has been the best I have found.

@Delfy-xk3ws

4 жыл бұрын

@@janamays2460 Thank u so much...for taking the time to reply to every1 keep up the good work..

Hi. I know you said you pull your tape off rather quickly after you epoxy, but how long would you say it is...immediately? 5 mins? 10 mins? I'm having the hardest time getting clean lines around my edges. Thanks so much!

@JMARIEDESIGNED

5 жыл бұрын

Leigh Banks I pull tape after about 15 minutes

@leighbanks8823

5 жыл бұрын

Thank you. Hopefully I'll be able to figure this thing out soon. Trying to make some for birthday gifts.

Do you ever do full fabric or do you always leave an edge