i love that you are covering all these different rally chassis thank you Dario

@dariorcgarage

5 ай бұрын

Welcome! More to come in the future

Do you have the stl or dxf files for the upper deck?

Hallo Darius, vielen vielen Dank für die ausführlichen Vorstellung mit den dazugehörigen Maßen. Mega gut. 😊❤ LG

Hi Dario. I'm glad your back to Tamiya.

@dariorcgarage

5 ай бұрын

I'll keep making video related to Tamiya cars, they are amazing!

@christophblack9390

5 ай бұрын

What do think about Tamiya's new XM01 chassis?@@dariorcgarage

Great overview of TT-02 rally conversion. Thanks.

Thank you dario! The video i was waiting for!! 🎉

@dariorcgarage

5 ай бұрын

Welcome! Happy to know that

Great video Dario 👍🏻

@dariorcgarage

5 ай бұрын

Thanks!

Hey Dario I've just buy a tt02 to complete my RC builds with the xv01. What a perfect timing. Thanks for the video Dario!

@dariorcgarage

5 ай бұрын

Nice to know! Enjoy your TT-02

36 likes! That is a very cool RC ride! I enjoyed the video! New sub here!

@dariorcgarage

5 ай бұрын

Welcome! Enjoy my KZread Channel 🙂

I havn't tried my tt02 outdoors jet, but I have achieved 35-36 cm u-turn diameter. Hope that weather here in Latvia soon will be fine to test it outdoors.

@dariorcgarage

4 ай бұрын

Congratulations! Happy to know that this video helped you

Great built, great video! Thank you for the detail explantation. Can you please give an estimate for the length of the steering rods?

@dariorcgarage

2 ай бұрын

Thank you! I'll try let you know, but of course are a bit longer than the stock ones. If I remember correctly 3cm

where can i get the top deck print files

Do you have a link for the upper deck printing

Love your videos! Quick question, what radio do you use? I’m new to the hobby and want to use all the same stuff as you

@dariorcgarage

14 күн бұрын

Happy to know that you enjoy my videos! I used a Sanwa MX6, now I'm using a Sanwa MT-5

Thank you for explaining it. It is very good. In another video they show the turning radius that the xv-01 wheels. And a this model, how much turning radius it has? To compare between models. Very thank's

@dariorcgarage

5 ай бұрын

That's the video kzread.info/dash/bejne/hadot6-FYsK8dKw.htmlsi=8bfzoRsHQ2pM-fRX 46cm for Tamiya XV-01

Thanks Dario for the informative video. Do you think you need the top chassis brace if you use the Tamiya Hop-up hard chassis?

@dariorcgarage

3 ай бұрын

Hi, can you be more precise please? To which item are you referring:)

@shouwnoosting6030

3 ай бұрын

@@dariorcgarage I'm referring to the lower chassis. I have upgraded mine to the Hop Up Options hard chassis. Do you think an upper brace is still needed if you use the hard chassis option?

Picked up a 2nd TT01 SRX and want to make it a fun rally car. What shock towers did he use in this build and what sre the length of the shocks? Thank you.

@dariorcgarage

2 ай бұрын

The rear one it's from Tamiya XV-01 (hopup) the damper's should be 5-6cm if I remember correctly

8:15 - this rear carbon shock tower looks like an XV-01 long damper stay 👌 10:04 - i think they're the same on the outside, i dont see the difference, it looks like youre holding 1 of them the wrong way round 🧐🤔

@dariorcgarage

5 ай бұрын

Hi! Yes that's a shock tower from XV-01 Long Damper, but the idea of the video is to "give the freedom" to adapt what you have around in order to obtain this result. Thanks for pointing it out, my mistake while filming. The outer part has been trimmed a bit too by my friend, thought was important to share this detail too

@shindisingh1165

5 ай бұрын

​@@dariorcgaragethanks Dario, I'm going to look into the XV long damper stays!

What is the front damper stay? the rear looks like from an xv01?

@dariorcgarage

4 ай бұрын

The rear is from XV-01, the front one I don't know since this chassis it's not mine. But you can try to adapt whatever you have

Hi Dario! Whats is the diff setup on this tt02 chassis?

@dariorcgarage

4 ай бұрын

Hello! No diff oil, just grease

hello. 4WD front damper hard, soft on the rear. Try a few times and you'll find the run you want. After 2WD drive, the rear shock absorber is hard, and the front shock absorber is soft. The front drive is hard on the front shock absorber. I hope it was helpful

@dariorcgarage

5 ай бұрын

Thank you for the advices

0er quanto apprezzi l'inventiva la macchina non performerà mai come la xv01, bella idea ma io a sto punto lascerei la tt02 al touring e comprerei una xv01.

xv02 pro chassis is a muchbetter designed chassis for a rally car otb

@dariorcgarage

Күн бұрын

Agree but if you want to go on budget tt02 it's the answer

The regular TT02 has a big problem. Even the width is 190mm same as type s, but actually the arms of TT02 is shorter only the wheel offset to reach 190mm. Check the TRF arms that come with type S, are much longer than the regular TT02 arm. The consequence is unstable as the actual wheel base is narrow

@dariorcgarage

4 ай бұрын

Good point! Some offset could also help

@user-pj8hu4op6z

3 ай бұрын

​@dariorcgarage meaningless to tune camber, it just makes the steering only worse

I have a very bad experience using the TT-02 Rally. Low quality and reliability. There are a lot of breakdowns, a lot of wear and tear, and it requires a lot of spare parts and tuning. Fragile plastic in the cold. Now I only use HSP FF.

@dj4monie

Ай бұрын

Sounds like a personal problem not the chassis.

Dario parla in italiano grazie 🙏