TAMIYA Super Stock Motor Comparison(TZ, RZ, BZ) by TT-02B(Ni-Cd 1600SP, TBLE-03S)TT-02
TAMIYA Super Stock Motor Comparison(TZ, RZ, BZ) by TT-02B(Ni-Cd 1600SP, TBLE-03S) on ASPHALT
【 MOTOR 】
* TAMIYA Super Stock Motor TZ
* TAMIYA Super Stock Motor RZ
* TAMIYA Super Stock Motor BZ
【 COMPARISON ITEMS 】
* 10m Sprint Time
* Top Speed
【 CHASSIS 】
Modified TAMIYA TT-02B (Neo Scorcher)
【 BATTERY 】
TAMIYA Ni-Cd Racing Pack 1600SP
【 ESC 】
TAMIYA BRUSHLESS ESC 03 TBLE-03S
【 SPUR GEAR 】
64T
【 PINION GEAR 】
29T
【 GEAR RATIO 】
5.74 : 1
Пікірлер: 66
I have had the BZ for years and love this motor.
@cagemanch.7567
4 жыл бұрын
I also think that Tamiya Super Stock BZ is a good balance motor.
@AndyX
7 ай бұрын
Agree,,the bz is the best all around. The differences are very minor ,,,plus bz is the only one that comes with the dust cover
Wow I did not expect these to be so close. Thank for the comparison and great video!
the reversed children cheer sound effect is gonna give me nightmares but very good test though!
I've been Waiting for a long long time for someone to this. Thank you so much. I always wondered who's who because these motors have almost exact specs.
@cagemanch.7567
6 жыл бұрын
Me too. This test makes me feel refreshed. Thank you for your comment.
Thumbs up, great video!
@cagemanch.7567
5 жыл бұрын
Thank you very much.
good one👍like the music too😉
Because Science. Well done. Exceptional video and testing.
Fantastic comparison 👍. From that I'd go with the motor I can get the cheapest. All performed great and are very closely matched.
@cagemanch.7567
5 жыл бұрын
I am glad I could help you : )
I use the RZ in my Robitronic Avid. I like it 💯 😎👍
thanks for this info, im going to replace my BZ with the TZ in my tamiya turbo honda to try to get more top end now.
@cagemanch.7567
5 жыл бұрын
It's my pleasure.
@Crummieboi56
2 жыл бұрын
well, gear ratios also have to be changed too.
@user-pj8hu4op6z
9 ай бұрын
I have both RZ and TZ, RZ is a bit faster
Need more people so spread this video more
Will these motors fit in the red rapid q130 truck
fantastic comparsion
@cagemanch.7567
2 жыл бұрын
I am glad you had fun : )
Super great greaat!!!
@cagemanch.7567
5 жыл бұрын
Thank you for your comment!!!
Hi, wich one is the best for of roads-on roads 50/50. 56t spur. 15 spin. 38t dif. I like the RZ. 4wd. Truggy 1:10. Maverick Phantom. 2s 50c
Nice
What motor would be the best for the super Blackfoot trucks please comment back Would love to know what motor will be the best
@cagemanch.7567
3 жыл бұрын
It is a very difficult question. It depends on the ESC, battery, gear ratio, etc. Please choose the best motor for you while having fun.
Great Video! Any one knows if you can change the timing ? Thinking to put one of These Motors into my Clod :)
@cagemanch.7567
25 күн бұрын
You can not change the timing.
Would this be faster than the sport tuned motor? Too fast for a re release hornet?
@cagemanch.7567
3 жыл бұрын
These super stock motors are significantly faster than the sport tuned motor. But I don't think that too fast for a Tamiya Hornet. Please enjoy breaking a wild horse :D
would you recommend a Traxxas 550 12t brushed Motor or a tamiya super stock tz for speed and power?
@heythere7308
4 жыл бұрын
I really enjoyed that Video its awesome thinking about getting a new brushed motor... Subed!
@cagemanch.7567
4 жыл бұрын
Unfortunately I have never used a Traxxas 550 12t brushed Motor. I think that tamiya super stock motors 23t are good balance.
@heythere7308
4 жыл бұрын
is it one of the fastest brushed motors?
@user-pj8hu4op6z
8 ай бұрын
I have 2 RZ, really fast and push my TT02 over 55km/h with gear ratio 5.8:1. But it is horrible burning hot, need a break every 5 min run
Do you run your motors in? It makes them rev a lot faster if run them without load on low voltage to get the brushes bedded in and polish the com, I also use soft springs and/or bend them slightly to have a lower load on the come again increases revs 👍
@cagemanch.7567
6 жыл бұрын
Yes, I usually do. Thank you for your kind comment.
Hello.can I use tble-02s?with the super stock bz.
@cagemanch.7567
5 жыл бұрын
Thank you for watching. TAMIYA does not recommend it.
@firstnamebunchofnumbers
5 жыл бұрын
My friend does with his Blackfoot (which has a tble-02s in it) and it seems to work fine. I’m going to be putting in a super stock RZ in my TT-02B.
「ビデオコンテンツはとても素晴らしいです、おめで
@cagemanch.7567
2 жыл бұрын
お褒めいただきましてありがとうございます。 嬉しいです :D
You try to give the video more brightness it will be great if you do
@cagemanch.7567
2 жыл бұрын
Thank you for your feedback.
I just got the rz a couple of days ago. I have it in a a959 that is lighter than the car in this video. I also have a smaller battery. The motor is a monster and pushed my car much faster than 44kmh. The stock motor in a959 is 70kmh and this one makes it faster than that. I don't understand how you got such a low kmh at 44?
@loganhawkinstv.426
Жыл бұрын
The car shown in the video is bigger and heavier than yours, and it's also running a nimh battery, whereas the a959 comes with a 2s lipo
@chrism1940
Жыл бұрын
@@loganhawkinstv.426 yeah that's what I said my a959 is smaller and lighter. Yeah it comes with a 2s
@JimBoBJames-no5db
10 ай бұрын
@chrism1940 I reckon this has got to do with the gearing you are using in your Porsche 959. Because 44-44 km/h versus 70kmh is a huge difference. In terms of percentage what does that work out to and using the same motor. even a lipo battery doesn't make that much difference. And I've been doing a lot of research too and cars reaching that speed are mostly brushless powered. Don't really know how you got to 70 km/h are you sure your speed metre is working properly? This really should not have a great deal to do with the weight of the car. I believe it's gearing , but 70 km/h ? Post a video of your Porsche 959 to show everybody then because I find you hard to believe mate👌👍
Some segments in the video are stamped not adjacent to each other
I think with single run sample sizes and considering the margin for error on the measurements with this data they can be considered exactly the same, they are essentially 23T 540 motors I think you need better/different testing scenarios, better measuring kit and more runs/larger data pools to tell them apart. Maybe even test the motors in different cars to and maybe most importantly the best batteries you can get to see differences. Sould also be useful to throw in a stock/basic 540 motor to compare.
@cagemanch.7567
5 жыл бұрын
Thank you for your constructive comments. As you say, these motors are very similar. I also think this comparison needs statistical method. To do that, I need more budget and time. Sorry for my poor English.
@chrism1940
Жыл бұрын
I have a stock a959 with 540. It burnt up and I put the rz in it and its a lot more powerful. Lot more torque and speed. I can be going around 75 present throttle with this motor and give it a little more fast and it will spin out. Just to take off with it I have to tap the throttle real fast then let off, do that 3 or 4 times just so I don't spin out taking off and I have good tires. It's shorter than the 540 but weighs more and is a little more big around. If The 540 is 70kmh this motor is more than that
@DPoner
10 ай бұрын
That costs a lot of money bro. I think we all learned a lot here. More than enough for most hobbyists. Just buy whatever is cheapest. You can make up the difference with skill.
@DPoner
10 ай бұрын
@@cagemanch.7567Thabk you op! Great vid 👍
There is basically nothing in it on the road, what about off road?
@cagemanch.7567
4 жыл бұрын
I don't think it's suitable for delicate comparisons, so I avoid off-road comparisons. Thank you for your comment : )
1.25x bros you bopping to this?
I will buy a BZ motor for my Tamiya wild one
@cagemanch.7567
5 жыл бұрын
Your selection is great!
Sorry but using a gear ratio of 5.74:1 makes your test irrelevant as Tamiya recommends : TZ : 6.5 to 8:1 RZ : 6.5 to 7.5 BZ : 9 to 11:1 !!!!! Actually the BZ underperforms due to the gear ratio you use, anyway you are out of range for every 3 motor tested, may be a gear ratio of 8:1 would be more relevant.
@cagemanch.7567
5 жыл бұрын
Thank you for your interesting comment. You are quite right. I know Tamiya does not recommend 5.74:1. I think that the gear ratio are necessary for preventing tire slipping during full acceleration. I am sorry for my poor English.
The image is too offensive