Much more helpful than the HP videos. Thank you for sharing !

YOU ARE AWESOME! I stupidly got sticker paper jammed in there and couldn't do anything to get to it. Hubby watched your video and took it apart down to the middle roller. He even put it back together correctly! Thank you so much for taking the time to do this.

@303electronics

3 жыл бұрын

Awesome! Glad you were able to use the video. Thank you for sharing your experience. Have a great day!

Amazing video! I just needed to know how to take the ink cartridges out with a powerless printer, thank you for taking the time and showing some extra steps besides taking the printer apart!

thanks for the video, helped me with my Hp Envy 5014

Thank you Wanted to pull the 2nd cartridge without taking the whole thing apart. Has a bunch of torx t10s out and was manually turning gear to no avail. But a min into your video my problem was solved. Thanks!

Thank you for the content. I realised in first minute what the fault was through watching you take it apart. Cheers

@303electronics

2 жыл бұрын

I'm glad you got it fixed. Thanks for sharing. Have a great day!

Thank you for this video. Did successfully dissasemble a hp envy 4525 with your instructions. It has a communicating problem with the scanner. But I was not able to find the problem. I guess the scanner unit is damaged somehow. Do you by any chance know where one can buy a spare part?

I ordered an envy 5055 it arrived with a cracked scanner bed. I have a Canon pixma with an intact scanner bed. I already took the glass out and I'm thinking about taking apart the envy to see if the Canon glass will fit it. I already made the mistake of touching the back of the glass though. Ugh. Or maybe I should try and mend the hp glass that cracked off with some kind of glue.

Genial video. Me ha servido para arreglar un muelle suelto en la mía. Muchas gracias 😊

Thanks for sharing. I have some stripes when scanning, I presume the scan sensor is dirty. Is there a way to open the glass and access the sensor without opening all the printer?

Thank you, brother. Your video saved me from buying another printer.

@303electronics

2 жыл бұрын

That's great! You're welcome! Thanks for sharing!

i really wish i could post a video in your comments of what my hp envy 5055 is doing the cartridge is folding the right corner of the paper with a little shredding and printing on top of the folded corner lol, now it completes the print its just that right corner i also did the alignment it requested

Hello I have a question when the scan is not emitting light, how can I proceed to fix it? Will the LEDs be damaged or will the ribbon have to be replaced? Is it the card to which the scanner is connected? Please do I need your help if possible? Thank you very much and for your video that helped you to disassemble.

Thank you! Helped also with Envy 4525.

@303electronics

5 ай бұрын

Excellent! Thank you for sharing that. Have a great weekend!

My 4320 after owning in a few years, says there is a scanner component issue (broken) and cannot copy or scan. Sounded like something snapped. Only scanned a handful of times. Repairs costly? Buy another printer?

Hi my HP envy 4520 keeps on displaying "Service Station Stalled". Any suggestions of what it might be? Thanks

Great video! I had a paper jam issue on my HP Envy 4520. I finally found the torn piece of paper, but now I can't put Humpty Dumpty back together again. The problem includes the paper path cover (I can't get it to snap in place so the scanner cover will close), the thing with the white sprocket roller on it, and a little plastic curved piece that I believe has something to do with double-sided printing. I hope this makes sense since my technical terms are a bit lacking. Thank you!

@303electronics

2 жыл бұрын

Hi. Thank you. I'm sorry you are having trouble. The paper access cover should be able to snap in place. You can also check the area on the right. There is a little plastic piece that snaps into the top portion to avoid it being open too much. Check to make sure that's in place

Very helpful Thanks for sharing.

@303electronics

3 жыл бұрын

Thank you for watching! Have a happy 4th of July!!!

I doubt I will get a response, but I will ask anyway. I'm short on time at the moment, but can you let me know where exactly you get to the printerhead? I believe mine is clogged, I put in new ink cartridges, but printing is still fitting on both colors. I would like to see if it can be manually cleaned without having to tear the printer apart.

excellent video

hi i have a question i have an envy series printer and it prints in stripes. cleaned in settings and nothing helped

Thanks very much for this! I have an HP Envy 4500. Sometimes the scanner lamp moves into position at top of page and gets stuck there. If I pick up the printer from the side an inch or two and drop it, it will start working again. Am thinking I may just need to re-seat the scanner connector, and wondering if you had any thoughts. Also kinda makes a squeaking noise on power up. Maybe carriage needs cleaning or lubrication? Thank you, this was very helpful for disassembly!

@303electronics

3 жыл бұрын

Thanks! One reason for scanner being stuck is one of the teeth by which the gear moves may be broken and makes the skip. It may also be a bad connection like you said. Regarding the squeekiness, the rod can be lubricated, or just wiped clean. If it isn't too loud, it shouldn't be a concern, but since you opened up the printer, lubricating some parts may help get rid of it. Good luck! Thanks again for your feedback! Have a great 2021!!!

@terryg2160

3 жыл бұрын

@@303electronics Thank you so much for the reply! Squeak isn’t horrible, so I think I’ll leave it alone for now.

@lillielee236

2 жыл бұрын

Thanks for the video tried cleaning the rollers still have issues with pick up think paper like card stock an sticker on the envy 4500 . Can we send printers to you for repair .

Took out the duplexer when trying to get to a paper jam. Do you have an clue how to put it back in?

Anyone know how to replace the flap which actually covers in ink black cartridge on a HP 5020. (Not the pink one) it's just came off and ive know idea how😢

hello professor, my printer has an error message that (ink cartridge problem) I have inserted all the ink unfortunately. the printer doesn't work at all, only this message is displayed. what should I do? Thank you

Where can I get the pink cover over the color ink cartridge?

Hi sir I have problem of HP DeskJet Ink Advantage 4535 model Printer so I getting error code of printer so u can guide for the to set the print

HP Envy 4500 with error code 0xb363745c --of course HP didn't offer public docs as to what this error is. This video at least allowed me to release the cart carrier. The lame tech support advises "unplug" to reset. Nope same error constant. Any ideas are appreciated.

Isn't there a ink reservoir to catch ink when you do a print test or when you do a print job? ( so that ink won't dry on the cartridges). I fill all my cartridges for the last 5yrs. Sooner are later won't it over fill?

@303electronics

10 ай бұрын

There isn't a tank, but a few absorber pads in there. Usually last a while, but I'd check after about 8k pages to see how it is.

Man this video is great, So I'm sitting here having opened the screen panel and I've checked all connectors which look fine so I'm guessing I have a faulty screen. So replace the screen do I just remove the circuit board and replace the screen which would be plug n play?

@303electronics

2 жыл бұрын

Hi. Yes, if the screen is faulty, to replace it is just to make sure you connect it properly and it should work right away. No special instructions otherwise.

I have a HP Envy 4502 printer. The little strip that moves my cartridge unattached and there is a spring that's out of place as well. I don't want to make matters worse by trying to service it myself, so I have decided to take it in for repairs. It appears to be a minor fix but I am not able to do the job myself. If you know of any service centers in Houston, Texas, please post here that information here. Thank you very much.

@ronaldpincus1053

Жыл бұрын

P

@ronaldpincus1053

Жыл бұрын

Replac battery on morel on shaver

One cartridge tray is just refusing to read any cartridge I put in. Old used ones (refilled) or new ones.... On closer inspection it looks like one of those small 'connector balls' that makes contact with the circuit on the back of the cartridge, is not sticking as far out like the others... I just found your video so I'm hoping I'll have a better idea of how to deal with this... Thanks :Colour works fine but black wont read and asks that I remove and replace...

@303electronics

2 жыл бұрын

Hi. Does it do that when you put old cartridge in? If not, the new ones you bought may be wrong cartridge number. Check the contacts area on the carrier to make sure there isn't a piece of tape or ink stick to it. You can just clean it by wipingh with paper towel and alcohol. Even if you do not see anything, try cleaning to see if anything changes.

@Spare14All

2 жыл бұрын

@@303electronics Hi, yes I can use an old black cartridge that I have refilled and emptied many times with no issues until now. The colour cartridge was working fine until the black cartridge became unreadable, now nothing will print and the error symbol is only over the black cartridge on the display. I purchased two new black cartridges but the error symbol remains over the black... I will give all connectors another good clean today both on the cartridges and the printer. Hopfuly it will work this time, thanks for the suggestions

How do I clean the print head if its clogged by ink? My prints doesn't have black ink and most prominent reason for that is clogged ink header according to the internet. Any help is appreciated thanks. I've tried poring a lot of alcohol on the printer head, I haven't tested it yet. I'm waiting for the alcohol to dry off.

@joeb8725

4 жыл бұрын

Having same issue

@resilient4637

Жыл бұрын

It's behind the ink cartridges

The door open error how its solved ? Can someone tell me the minute where i cand found the sensor ? Sorry for my bad english and thank u for all. Have a nice day:)

Stamattina ho acquistato hp 304 cartuccia originale per hp envy 5010 ma mela riconosce come vuota mi dice di togliere la cartuccia e di installare nuovamente se da lo stesso problema sostituire cartuccia vorrei vedere il video come risorvere il problema

Hi! Great video! Can I replace my wifi card on my hp envy 410a because its only b/g to another wifi card 5Ghz?

@303electronics

3 жыл бұрын

I do not think so. Let us know if it works though.

Great! You could have told about that "latch" before I broke it.

@303electronics

5 ай бұрын

I'm sorry. It is best to watch video fully before trying. You can make a better judgment on how you want to proceed if you get a whole picture. Sometimes, you don't need to take a lot of parts to get to where you need.

@JohnJTraston

5 ай бұрын

@@303electronics The problem with a lot of these "disassembly" things is that there are lot of different invisible fasteners, etc.. Something you don't know until you do it once and break things in the worst case. Your video tutorial looked like you were a pro and have done it multiple times. After the fact I was surprised when you tried to remove those 2 screws close to the latch. You could have broken it right there. If you took that latch off like you did it later then taking those 2 screws off would have been much easier and that would be the right way to do it.

i need a couple of those little white rollers and springs

@303electronics

3 жыл бұрын

They may be hard to find. I rarely have them.

Is there a video on how to disassemble an envy 4500?

@303electronics

3 жыл бұрын

Hi. The closest video to HP Envy 4500 is the one below: the only difference is that the 4500 does not have the feeder on top like the 4630. I Hope it helps: kzread.info/dash/bejne/p42eu5WQpbvLkZs.html

Hi I found video very helpful. my problem is my printer keeps sticking if I use Card ok if I use regular paper. please help

@303electronics

2 жыл бұрын

Hello. Thank you..Cardstock may be too thick for this printer. Have you tried cleaning rollers to improve paper flow? Also, you may need to load just one cardstock paper at a time.

On my HP 2520 I have an error that says the bottom paper tray is open even when it’s clearly closed...

@303electronics

3 жыл бұрын

The tab that pushes the open/close sensor is bent or broken, that's why it gives you the error. My thoughts. Let me know if that's the issue or if you need more help.

@jackie_

3 жыл бұрын

@@303electronics where exactly is the open and close tab located?

thank you for posting this - I read through all the comments, @4444kingskid is going through the same thing I'm dealing with where I cannot for the life of me, get that plastic, covering, curved piece (covering the paper path roller) to snap into place, do you have any tips for that? thank you!

@303electronics

6 ай бұрын

I apologize for such a long time to notice your message. I have read through more comments and have noticed many people have the same issue. I will be sure to post a video and show how to do that. It goes into slots inthe back and the front snaps in when you push down. I will update you as soon as I post that video.

@303electronics

6 ай бұрын

Here's the link to video on how to install that piece: kzread.info/dash/bejne/e6qcubGJf6m3qqQ.html

HI; YOU are amazing ; i have the same printer which turns on with this error "ÍMPROPER SHUTDOWN" printer failure error "0X61000072" I've done all tests without solve it....I will be able to disassembly it but I need your help about how to correct tis error........thank you soooo muchhhh

@lutravelstheworld

Жыл бұрын

I have the same code. What did you end up doing to fix it?

My HP Envy printer works fine but sometimes when I power it up and makes a grinding noise for 3 seconds

@303electronics

3 жыл бұрын

Have you checked the area of the ink carriage rest? It is on the right? Sometimes ink gunk can build up and prevent mechanism from moving.

My clasp to keep the ink in place came off and now I can't put it back on and it won't keep my ink in place and register it 😔 help please

@303electronics

3 жыл бұрын

Did it break off? Is it possible to glue it if so?

how to off ink detection po?

15:40 Removal of printer

Can carriage belt be replaced?

@303electronics

2 жыл бұрын

Hi. It can be replaced. Usually it is almost impossible to find that belt. Did it rip?

@brendalynbynoe497

Жыл бұрын

@@303electronics yes, it ripped. I just saw your response to my question.

I can survive Wuhan Virus but I'm not sure I could survive disassembly of an Envy 4520. Thanks for the post however.

Will never buy hp again, thanks for the video though.

all I WANT TO SEE IS THE FUSE !!!

@303electronics

3 жыл бұрын

It's somewhere in there on the main board. Very tiny

@aaronolm99

Жыл бұрын

Mine doesnt turn on, did you find the fuse?

thank you or posting