that's just de-stressed my new expensive purchase! Thank you for sharing this, really helpful

@xS0CIAL0UTCASTx

5 жыл бұрын

Your welcome, glad to help

Dude - you are a legend. Watched a bunch of videos and yours is the best !!!!!! Got it set up. Thankyou!

@xS0CIAL0UTCASTx

4 жыл бұрын

Thanks Sean.... legend maybe a little excessive.. I am no youtuber.... just trying to help people out and great to hear that its helped you... happy training 👍

Thanks so much! I couldn’t solve this and am hoping this will do the trick. Very much appreciate you taking the time to film.

@xS0CIAL0UTCASTx

5 жыл бұрын

Your welcome Kevin.... hope it solves your issue 👍

Thanks this helped me out no end.

Thx a lot. Watched your video when setting it up.

@xS0CIAL0UTCASTx

5 жыл бұрын

Your welcome hope it helped 👍

Thanks goodness for your video ! I own a gravel, a Spe Diverge sport with Shimano 105 brake system. It is no easy to install the cassette and find the right axe for my frame...(well for a beginner like me) but I did it... Unfortunately after 2 hours working on it, when I finally finished, I realized that the brake was scratching the HT ! After searching, I understood the 5mm was missing of course, but I did not know where to install it !!! I changed the cassette, the axle, etc... 2/3 times, I was getting crazy. So, without you, I would have sold the Tacx on ebay !! Really...

@xS0CIAL0UTCASTx

4 жыл бұрын

Glad it helped... hope you enjoy your new Neo... happy training.. 👍

I was looking for a video like this, thanks. Gonna try it out tomorrow because the brakes were so close to the tacx frame.

@xS0CIAL0UTCASTx

11 ай бұрын

Glad to help 👍

@r3dbullbbs

11 ай бұрын

@@xS0CIAL0UTCASTx the axle is too short somehow after putting on the spacer...It cant really reach the in threaded nut on the other side. Bike is a Cube Attain SL

@r3dbullbbs

11 ай бұрын

@@xS0CIAL0UTCASTx any idea? Thanks a lot

@xS0CIAL0UTCASTx

11 ай бұрын

@@r3dbullbbs try a smaller spacer... or no spacer at all?

Better than the official videos 👍

@xS0CIAL0UTCASTx

3 жыл бұрын

Your welcome... just trying to help people out.. thank you for your kind comment..

very good video as about to buy the 2T and me and missis have different bikes , she has the norm quick release and i have the 142 thru with disc brakes . glad dont need to change cassette over . even though i do have to buy a cassete thats in the middle of the 2 bikes , mine has 34t and shes got 30t .. so will get 32t so it dont mess with di2 settings . i will only change over to my bike if im going to do over 50 milers or more , shorter rides i can just use her bike and this would be worth doing changing axles on bigger rides .. thanks again for the video its really helped in deciding ..

@xS0CIAL0UTCASTx

4 жыл бұрын

Glad it helped 👍

Thanks for this video, brother.

@xS0CIAL0UTCASTx

5 жыл бұрын

Hope it helped 👍

All the adaptors that came with my tac x s smart flux would not fit my axle as my axle is 12mm but still too big I ordered the adaptor set from tacx and waiting on it now so fingers crossed it will fit and work, thanks for your video

@xS0CIAL0UTCASTx

3 жыл бұрын

You are welcome.. one of the downsides with the flux is the lack of out of the box compatability... Good luck with the Flux.. Happy riding 👍

@citrix123

3 жыл бұрын

@@xS0CIAL0UTCASTx I have a cube entry level road bike and on the axel it says 12mm but also has numbers 0418 hoping that's a serial number and not some type of 12mm as I have found no other numbers like that on any video on KZread or the Web lol, thanks bud will enjoy indeed 😁

@xS0CIAL0UTCASTx

3 жыл бұрын

@@citrix123 The bike in the video is a Cube cross race pro... the rear axles have sort of come down to a standard of 12mm x 142mm so I am sure if you have ordered the correct kit... it will fit.. it just may take some messing about to get it right..

@citrix123

3 жыл бұрын

@@xS0CIAL0UTCASTx legend, good man, thanks for that nice reassurance lol 👍

After installing I also had the issue of the disc brake hitting the body of the Trainer. In the manual of the adaptor kit it says to only use the Black 5mm Ring on 148x12mm thru axle. I have a 142x12 standard thru axle. Do I risk damaging the frame By using your method as per instruction the Ring is only for 148x12mm? I would really appreciate a Response. Thanks for the Video!!

Thanks for sharing this video! Was all the adapters in this video included in the tacx neo 2 box? I can't seem to find the last things to finish my set up. Thanks!

@JayPeg88

3 жыл бұрын

Me neither - how did you get on?

@xS0CIAL0UTCASTx

3 жыл бұрын

Sorry Nadia for taking so long... everything in the video comes with the Neo 2 yes.. 👍

Thanks!!! Btw. I put mine on loosening the brake caliber not ideal, then saw your video. W the spacer will you have to retune the shifting. Does the spacer stress the frame by increasing the width between the drop outs?

@xS0CIAL0UTCASTx

3 жыл бұрын

I didn't have to re-index the gears.. works just fine.. but every bike is different.. you may need to.. No stress on the frame, mine simply slots straight in. 👌

@awpincus

3 жыл бұрын

@@xS0CIAL0UTCASTx Thanks... It worked great.. Had to use 2 of the 2.7mm spacers to get the clearance. I heard there's a 4mm one out in the wild, but TACX-Garmin did not have or know of one... Anyway, great fix.. Thanks..

I'm a bit confused. I currently have a conventional quick release bike set up on my Neo 2T. I want to change that and put my thru axle Trek Checkpoint. I see that Garmin sells an adaptor kit with its own special skewer. Do I need to get that kit or can I use the skewer that came with the Neo and just swap in the 12x142 mm spacer/adaptors? Thanks for the great video!

@xS0CIAL0UTCASTx

2 жыл бұрын

You should have everything you need if your 2T came new with scewer kit...

Thanks for your video instruction. Any chance you could share the dimensions of the corrective spacer please so I make a replacement? (Lost mine while moving house)

@xS0CIAL0UTCASTx

2 жыл бұрын

It's a 5mm spacer

@brucerichardson9656

2 жыл бұрын

Thanks very much👍🏼

Great video!! Do you use the black spacer with your aeroad?

@xS0CIAL0UTCASTx

5 жыл бұрын

I dont use my Aeroad on the trainer as Canyon dont warranty their frames for 'rigid' trainers (it's ok on rollers) I also have the luxury of a second bike (Aluminium Cube CX pro, seen in the video) so keep the Aeroad for fine sunny days... glad the video helped 👍 #rideon

@xS0CIAL0UTCASTx

4 жыл бұрын

Good news Canyon have changed their stance trainers.. frames are now warranted for trainer use 👍 not sure if this applies to new or retrospective though...🤫

I'm nearing the same gripe at the moment. Does the addition of spacer not mean its now got a width of 147 ( 42 plus 5mm spacer?). so how does it still fit? much appreciated Will

@xS0CIAL0UTCASTx

2 жыл бұрын

I reality most frames are actually wider than 142mm and reliey on the through axle to pull the parts together and make everything rigid. In the case of my 142mm frame adding the spacer made the frame sit on the Neo better. But I also understand other frames may not. But in all frames they designed with an element of flex in the design. Unless it's an original boneshaker... 🤣

I want to use the Canyon Endurace CF SL Disc 8.0 bike with the Neo 2T, it has a rear thru axle that is 12 x 142, following your video do you think I should be ok as far as the clearance between the tacx housing and rear brake and bike should fit properly.

@xS0CIAL0UTCASTx

4 жыл бұрын

I would say try it standard first... if you have an issue with the brake caliper touching... then carry out the modification... I have an Aeroad and never use.it on the Neo but I have tried to fit it but couldn't due to the Rear axle threaded section NOT being pass through and capped for aerodynamics I assume.

@dahill1017

4 жыл бұрын

@@xS0CIAL0UTCASTx thank you for your response.

Dude I just got mine but the adapter I have is the 10mm and my cassette hit the frame. How much of a difference does 2mm does? Because I know there is another one for 12mm but I don’t wanna spend another 75 dollars for a kit it doesn’t work

@xS0CIAL0UTCASTx

Жыл бұрын

If yout cassette is hitting the frame you are doing something seriously wrong.. do you have a spacer behind your cassette?

@antonioparamo2048

Жыл бұрын

@@xS0CIAL0UTCASTx yes. Everything is in place but I found out I need the 12mm instead of 10mm I’m just waiting for that part

@xS0CIAL0UTCASTx

Жыл бұрын

@@antonioparamo2048 12mm seems very excessive... is your rear axle 12mm x 148mm?

@xS0CIAL0UTCASTx

Жыл бұрын

12x148 is the standard... but you only need the 5mm spacer in the video IF your brake caliper is touch the Neo.

@antonioparamo2048

Жыл бұрын

@@xS0CIAL0UTCASTx I actually needed the 12mm but it wasn’t assembled right. Now it first perfectly and I was able to ride on my swift

Be careful not to use your Rear brakes while on Tacx!

@xS0CIAL0UTCASTx

5 жыл бұрын

If you look closely in the video you will see the caliper has the transport spacer fitted... so any accidental presses of the brake wont matter 😉👍

Hi I’m having trouble with my Tacx neo 2 wonder if you could help

@xS0CIAL0UTCASTx

Жыл бұрын

I can do my best 👌

@markmather3362

Жыл бұрын

@@xS0CIAL0UTCASTx have ya got a email address I can send pics over

@xS0CIAL0UTCASTx

Жыл бұрын

@@markmather3362 Due to the nature if KZread I can't give you my email... however you can put your email on here and I will send you a reply 👍

@markmather3362

Жыл бұрын

@@xS0CIAL0UTCASTx can you delete message off

@xS0CIAL0UTCASTx

Жыл бұрын

@@markmather3362 yes I can remove it once I have it 👍