Dude, I just got a stock 2019 pro and I am seriously jealous. Congratulations on your awesome ride!

I'm a Jeep guy. but if i may say, you're Tacoma is awesome. If I were to get one, I would get it just like yours. Good luck, have fun. :)

@cpjv1987

5 жыл бұрын

Every jeep guy I have known are attracted to Tacos. And every taco guy I've know are attracted to jeeps. I guess they both have a bad ass offroad RC car style when fixed up.

Great looking truck.Keep up the AWESOME BUILD!

@Runnin4Tacos

5 жыл бұрын

Miguel Rangel thank you, will do!

Nice everything looks great, rig looks amazing keep the mods and the vids coming

Bro you truck look awesome man

looks sick bro great job

Super clean bro! Can’t wait to see it in action!

@Runnin4Tacos

5 жыл бұрын

JrockTheCrusherF me tooo

Looks great man. Wanting to do the same with mine! Again looks great

sick Taco, looks great!

Looks awesome man 👌👌👌👌👌

Sweet! Love the vids! I recently bought the grill lights and hoping to have them installed soon. Interested to see what sliders you buy...thats next for me.

I have a 2016 SR5, 3 inch lift, I’m looking at -38 offset with T8 Seekers, did you have any issues with rubbing?

Looks great!

@Runnin4Tacos

5 жыл бұрын

Joseph Holmberg thanks!

One of the slickest set ups I’ve seen so far. Just need to ditch those side steps for some sliders

Looks awesome

Looks good!

It's Lit. Finally, looks man

@Runnin4Tacos

5 жыл бұрын

M3kail thanks!

Dude. You spent the money where it counts. Shock relocation and hammer hangers, nice work! We need to see some videos of her all stretched out!!!

@Runnin4Tacos

5 жыл бұрын

singletrackftw yes for sure!!! I'm trying to get her out there soon

@singletrackftw

5 жыл бұрын

I’m going to do either archive’s hammer hangers or shackle flip here soon & pair it with some humble b110 bilsteins, they are basically max travel without going shock relocation.

Dude. Nice truck. I got similar here in NH.

@Runnin4Tacos

5 жыл бұрын

Ray Siekierski awesome! I love the color the most

Very nice man. Subed

Wish they made those wheels in my bolt pattern.

Nice truck!!!!

Clean af 👀

@Runnin4Tacos

5 жыл бұрын

Jonnie Johnson II thank you!

Good god what a set up. The offest is great but man how it feel when the had to start chopping up the truck.

Nice truck !!!

@Runnin4Tacos

5 жыл бұрын

r3dTitan thank you!

Badass!

You'd have been better off purchasing the OffRoad model since you've removed every TRD Pro about this truck. Nice setup though and hey, you should use it for what the after market parts are intended for. Get it dirty, get some trail rash on it and flex it out.

@Runnin4Tacos

5 жыл бұрын

Benjamin Speechly I completely agree but I got it used and saved a bunch of money to get the all the cosmetic Pro goodies so I had to do it. Finishing some minor rubbing this coming week then we can finally take it out

@Lexusgx550

4 жыл бұрын

Taco Twonz I drive 95% on road. I want higher ride 1.5-2.5 inch with some hybrid tires for road and of. And to get smooth ride on roads and rough roads. What would you recommend ? Always scared to change suspension :)

I was told yesterday that my ray10 -38OffSet won’t fit on my Taco with 285/75/17. I did a CMC and getting the same King and Deaver setup as yours. Looking at this, they don’t know what they are talking about

@Runnin4Tacos

4 жыл бұрын

Donard Ebana it will definitely fit if our -38 offset fits haha they crazy

Any advice would be much appreciated. As always your experience and help is much appreciated. My setup: Kings (-119-ext front and -121-ext rear, possible 3 in ligt), icon tublar UCA's, Old Man Emu mid duty leaf springs) I just ordered a set of Ray 10 Brushed Bronze, 17x9, -38mm offset rims and have a 2015 second gen tacoma. My questions are: 1. Will it fit in my tacoma, and if not, how much should I pay a shop to trim my tacoma so the rim/tire combo will fit? 2. Will it effect my tacoma's offroad performance? 3. What size of tire and brand you recommend? 4. Am I missing anything?

What side bars are you sporting? They look great! Just bought a 2019 TRD Pro

Nise completed package! How did the welding go? I noticed that you opted for a shop to do the welding. Hope all went well. Thanks for the video.

@Runnin4Tacos

5 жыл бұрын

Maximilian R the welding went great! Everything's solid and I couldn't be happier

After u lifted the truck is it the speedometer still accurate? If no what solution to fix that?

Beautiful build man! This is my dream setup/color/everything. Saving for later reference when I can finally get one of my own!

@Runnin4Tacos

5 жыл бұрын

Jake Z thank you! That means a lot and we have more to come so hopefully you'll stay tuned for that

Very Nice

Like your vids dude, but I liked your truck better before the lift. The geometry of your CV Joints does not look very happy. Better keep your eyes on those CV's.

I did the same setup on my truck only difference was I used toyos MT 285/75/17 still rubs a bit on the cab mount :/ even with the chop

Take that stock skid plate off and send it to me and get one that matches the rest 😁 nice build brother.

@Runnin4Tacos

5 жыл бұрын

Daniel Hannah 😂

Hey did you have to do a cab mount chop or relocate to fit the 285/75/17

Nice truck

Thinking of ordering the F5’s. They look great. But with the hub is exposed, what do you do on the rear wheel? Front wheels have a rubber cap, however rear wheel, at least on my Tacoma, the hub has a layer of rust.

First comment! You should send me some of those grill lights!!😉

Nice looking truck! Did you have to use wheel spacers for the SCS wheels and did you have to buy new lug nuts too?

@Runnin4Tacos

5 жыл бұрын

BOMBS no wheel spacers, I got them in case I had to use them but ended up returning them. I did have to get different lug nuts

Love the truck just feel like everything you are doing could have been done on a lower model truck! Dealerships around me are charging 10k markup on the pro models

@Runnin4Tacos

5 жыл бұрын

Yeah I could have totally done it on an Off-Road but I got the Pro for a really good price being used so I couldn't pass it up

Sweet truck Twon! I’m going with the Fox 2.5 DSA. Are your front spindles stock? I noticed you added gussets. Not sure what that is or what it does?

Awesome truck! Looking for the F5 wheels on my T4R. Where did you get the center caps?

@Runnin4Tacos

5 жыл бұрын

No center caps at all

Nice! Did you use spacers to get that stance? 600lb coils?? About to do the same to my 2019 285/75/17s CMC??

Did you purchase your F5's directly from SCS? I'm having a hard time finding them for sale?

Is its sluggish now without a regear? Nice truck!

Damn rock sliders for these trucks are like twice than what mine were for my Wrangler! Which did you go with?

@Runnin4Tacos

5 жыл бұрын

Juan Gonzalez these are actually stock running boards, but the sliders are being made right now

What trimming cutting did you do for the tires? CMC? Liner/bumper trim? Thanks

@Runnin4Tacos

2 жыл бұрын

The usually CMC and plastic liner trimming. Whatever is in the way and that's based on the wheel and tire combo

I have a pro why new suspension ? I have 285 75r 16 34” tires with pro suspension and n issues ?

@deankruse2891

4 жыл бұрын

long travel set up

I’ve got a stock TRD off-road 4 x 4 and I was thinking about getting these wheels because they are 5 to 6 pounds lighter than the stock wheels and I was hoping it would help with power and fuel economy. I would like to stance to work stock I’m gonna be keeping the tires that came on it for now what offset do you recommend?

Any rubbing issues running that wheel and tire setup?

I'm planning to buy 17x9 as well u think I'll get any rubbing if I have 3 in lift on it

@Runnin4Tacos

5 жыл бұрын

PROs binbokills it depends on your tires and wheels offset

@PROsbinbokills

5 жыл бұрын

@@Runnin4Tacos it would be Ray's 10 17x9 3.5 bs 6x139.7 same as yours but my tires would be 285/70/17 . I'm trying to ask other people but no answers .

@Runnin4Tacos

5 жыл бұрын

PROs binbokills you'll rub a little if your offset is -38 but nothing a little trimming of the thin plastic fender liner won't fix

@PROsbinbokills

5 жыл бұрын

@@Runnin4Tacos thanks dude , so the 17x9 will just make my tire stick out more or just a deeper dish , sorry I'm just new on all of this

And what are you going to do whit the TRD PRO suspension

@Runnin4Tacos

5 жыл бұрын

David Ortez12 sold the night I took them ofd

Was there a breaking in period for your, Kings? I just got mine put on and they're feeling a little stiff.

@Runnin4Tacos

5 жыл бұрын

I think about a week. Are yours adjustable?

@tucloviogallegos9250

5 жыл бұрын

They aren't

around how much was it just for the parts for the lift? no install

@Runnin4Tacos

5 жыл бұрын

Jose Flores around 7k

People are going to look back on the music of this type and shake their heads

How’s this lift kit holding up since you’ve had it installed for sometime now? What are your thoughts on it up to this point?Also since your in Colorado, how does it look after those salty winters? I’m in MA and it gets rough up here.

@Runnin4Tacos

5 жыл бұрын

They are superb! Love them. We wash our trucks pretty often to get rid of the salt underneath so no problems

Do you have any tire rubbing? Or did you also do a cab mount chop?

@Runnin4Tacos

5 жыл бұрын

Wayne Escritor yes and yes. Still need some minor trimming to do for the rubbing when locked in reverse

@wayneescritor1491

5 жыл бұрын

@@Runnin4Tacos cool, love the truck bro! Keep making videos of it.

What it the opening b-roll music?

Hey man. Would you be cool with sending me everything you got for this lift setup? I’m should be getting a New Taco this month and yours sits perfect man.

@Runnin4Tacos

5 жыл бұрын

V DUBBER yeah. King 2.5 coilovers and rear shocks, Deaver light springs, Total Chaos UCA

@dustinsalisbury4383

5 жыл бұрын

Taco Twonz awesome man. Thanks! I live in Colorado for now so if I get a taco before I leave in July we should hit some trails man!

@Runnin4Tacos

5 жыл бұрын

V DUBBER yeah I'll be down

@glennstock4573

2 жыл бұрын

@@Runnin4Tacos hi I have 2.5 kings extended travel (front and rear) , icon tublar UCA's, and old man emu mid duty leaf springs. I just purchased Ray 10s 17x9 38 offset. My installer is recommended me 275s toyo tires instead of 285s. Curious if I'm going to rub after trim and have already incorporated a cab mount chop. What are your thoughts? Will my set up work? Look forward to hearing from you soon!

Did you have to do the cmc?

Where'd you get the scs sticker on your wheels?

@Runnin4Tacos

5 жыл бұрын

J. Blud Channel gotta email SCS for that

Shop chop anything?

Hey guys I know this videos old but what dogs are those? They look like factory rigids but yellow. Thanks!

@Runnin4Tacos

3 жыл бұрын

They are, just some overlays over them

Where did you get the amber rigid fog lights? I’m assuming that they are rigid’s.

@Runnin4Tacos

5 жыл бұрын

These are actually stock, I just put yellow overlays I got from Amazon. Super easy but makes a big impact on the look of the truck in my opinion.

How much cmc did you need to do?

Whats your MPG city and high way now with all that mods?

Brother I have 3 inch lift, do you think I can fit a 285/70r18 with a -12 offset

@Runnin4Tacos

4 жыл бұрын

Yessir. You can, you may want to do a cab mount chop for extra clearance when off-road

@Murkey-w5g

4 жыл бұрын

Taco Twonz thank you buddy.

What running boards are those?

@Runnin4Tacos

5 жыл бұрын

Dee Hodge these are the stock ones. Just took them off today getting ready for the rock sliders

Hello buddy, how much offset do you have in your wheels?

Which side steps are those?

@Runnin4Tacos

5 жыл бұрын

January Fires just stock ones

How much was the cost of all of this? Just trying to get a ball park

How soft is the ride compared to stock?

@Runnin4Tacos

5 жыл бұрын

Brian Mogle really soft and comfortable

@brianmogle1121

5 жыл бұрын

@@Runnin4Tacos thank you for replying. I have been on TacomaWorld Forum and there are people there that say the King shocks need to be rebuilt frequently. Have you had any issues with yours needing to be rebuilt?

@Runnin4Tacos

5 жыл бұрын

That is strange, I have never heard of that but people make the biggest thing out of the smallest. I love my King's, unless you do any baja racing you'll be fine. They are like any other shocks out there, but instead of having to replace them when their life span comes you can rebuild them for cheaper.

What size lift is this?

dang 285/75/17? did you have to do a lot of chopping?

@shohokuslamdunk

5 жыл бұрын

100%. Those SCS wheels are 17x9 with -38 offset. impossible without a body mount chop.

Did u regear? If not, how does the power loss feel?

@Runnin4Tacos

5 жыл бұрын

No I did not, I don't feel any power loss at all up. The only thing I notice is that I can't stay in 6th gear when trying to hold 70mph, it will downshift to 5th gear

@thomasford4184

5 жыл бұрын

As much money that you spent so far do your self a favor and regear to 4.88. You will be a much happier camper :)

@Runnin4Tacos

5 жыл бұрын

Thomas Ford do you think that's enough? I have a bed rack now with a tent coming in the mail. Need advice on this

@thomasford4184

5 жыл бұрын

Hmm... I think so. 5.29 may be a little to tall for your size tire but if your gonna add weight... I have the same tire and size and the 4.88 gears just made the truck shift so much better. I’m not planning on adding a rack and a tent but some body amor later on down the road. When I’m on the freeway I’m in 6th gear a lot more and it doesn’t jump from 6 to 4th on the slightest hills anymore. It down shifts to 5th and you don’t even notice it shifting. After putting on the bigger tires I dreaded driving my taco... but now I’m back in love with my truck. Also get the ECGS bushing for the front clamshell and have who ever is installing the gears replace the needle bearing at the same time since they have it all apart.

@Runnin4Tacos

5 жыл бұрын

Thomas Ford cool thanks man! Definitely a lot of good information. I will have a bumpers on in the near future too so I'm thinking 5.29

did you drop the front diff?

@Runnin4Tacos

5 жыл бұрын

MRSNIFFMEFINGA no I didn't because I only did a 2.5" lift. Just enough to fit the tires

@MRSNIFFMEFINGA

5 жыл бұрын

@@Runnin4Tacos Thanks man! thats what I'm hoping to achieve with the king 2.5's I bought.

@NateRobertson-jl4jm

5 жыл бұрын

Taco Twonz How many threads shown on the kings to get 2.5” lift. I have the exact same setup in the front.

@Runnin4Tacos

5 жыл бұрын

Nate Robertson I'm not sure to be honest, we adjusted it according to the instructions and then we will adjust soon since it has settled now

@NateRobertson-jl4jm

5 жыл бұрын

Taco Twonz I just got mine installed. I told the shop 2.5. I think they went 3”. It rides ok. But alittle firm. I put the adjusters all the way to soft. I just wish it was alittle more soft. I have 285/70/17.

Why do you like kings? Is Kings better than Rancho?

Mai gosh, how much did this ended up costing you, i have a 2017 OR dclb and am just beginning to look at lifting it, instead of kinfs i was looking into the new bilstine 8112/8100 series shocks instead. I never knew hammer hangers was a thing

@Runnin4Tacos

5 жыл бұрын

instantjizz too much lol. 7k in the suspension. Bilstein's are good depending what you want to do

@instantjizz

5 жыл бұрын

@@Runnin4Tacos loving your truck man, i hope to slowly but surly get up to your level. Thanks for the info twonz

Are they hiring wherever you work? :)

Is this 3 inch lift???

@Runnin4Tacos

5 жыл бұрын

Alfredoh212 yeah 2.5-3" I haven't measured it after it's settled but it's perfect to me

@Alfredoh212

5 жыл бұрын

Thanks

How much was the install?

@Runnin4Tacos

5 жыл бұрын

Mark Miguel 3500 with fab time

I love your tacoma. I'm thinking about ordering some scs wheels and was wondering if the -38mm offset allow for the tire to tuck when the suspension is compressed

Damn dude. So you got a pro, and just ripped out the suspension you paid for? Lol. I wanna get a pro, but I want a bit more clearance without having to remove the stock suspension.

@peterseinfeld

4 жыл бұрын

Pedro Rodriguez yea I’ve see a few guys on KZread do this . Pretty dumb . Could’ve saved themselves 10k and just bought the trd off road .

@HDA_III

4 жыл бұрын

For real. Pretty stupid.

What do you do for a living and how can I do it.

@Runnin4Tacos

5 жыл бұрын

Lol. We are the owners of runnin4tacos.com

Did you have to trim a ton with 285s and -38 offset? Cmc?

@Runnin4Tacos

5 жыл бұрын

J. Blud Channel not really. Not bad at all

Why did you get the TRD pro and take off the FOX suspension? Great build just why not build up a TRD off road?

@Runnin4Tacos

5 жыл бұрын

Marc Downing I found a good deal for a used Pro and the Fox is nice but I wanted more ground clearance and needed bigger tires for that so I needed a lift to fit them. Got the Pro wayyyy under MSRP but I get this question all the time so I get it

@_Marc_D

5 жыл бұрын

@@Runnin4Tacos Ahhh I see! Here in Canada TRD PRO's go for a premium.

@Runnin4Tacos

5 жыл бұрын

Marc Downing ahhhh I see. I got lucky here then 😁

Hello can you credit the music?

Nice equipment, definitely heads above most Taco lifts, you would think paying that much to have it installed they would have covered the shocks from all the over spray......kinda defeats the purpose of having high end Kings covered in black splatter. Bad workmanship by that shop imo

@Runnin4Tacos

5 жыл бұрын

Leni O hi, I think what you are seeing is dirt and mud. This was shot about a week after the install and I have already taken it on a few dirt roads. There's definitely no over spray because we didn't paint anything after the King's were put in

What a waste of time and money on the suspension and getting the trd pro. Could of got the trd offroad and done that.

Why would u pay someone to build a tacoma, it’s the simplest car to build up yourself

You guys sell stuff from your house you guys don’t got a shop

gas mileage on this truck went down to 6mpg

Sorry bro. The only thing I like about this truck is the suspension and roof rack

@Runnin4Tacos

5 жыл бұрын

jaimedc5 it's alright man, you're the first so no worries

@jaimedc5

5 жыл бұрын

Sell me your trd pro wheels and tires

Why would u pay someone to build a tacoma, it’s the simplest car to build up yourself