you might not have his budget , but you have forgotten more about mechanic'ing this week than his entire team will ever know.....plus you are not annoying 😃

@Stop..carry-on

4 ай бұрын

Yep can’t watch Matt anymore he progressively gets more annoying as the years pass.

@YTDTETV

4 ай бұрын

Hey Ed thank you 🙏 really appreciate the kind words. I have to be honest I don’t even watch his videos I just see them pop up and loads of people ask if I watch him. I enjoy watching more real life KZreadrs with a reasonable budget rather than just throwing thousands at stuff. Maybe I’m a little jealous 🤷 don’t know I don’t think I want to be that big as I wouldn’t be able to reply to all you guys in the comments it would be overwhelming. Either way thank you 👍

@YTDTETV

4 ай бұрын

Ive only seen a few minutes of one video but a lot of people ask me if I watch him, the cars and numbers ££ are just ridiculous. I’ll stick with my budget stuff 👍👍

@YTDTETV

4 ай бұрын

I’ve also pinned this to the top as I’m blown away by your kind words mate 👍

@samituomisto106

4 ай бұрын

Yup. Matt is a bit hard to watch...

The commentary is spot on 🤣 - great videos, keep it up!

@YTDTETV

12 күн бұрын

Thanks mate appreciate that 👍👍

nice one mate top job as ever nathan

My biggest bug bear with van’s is when they have a light Gray colour for trim. They look awesome

@YTDTETV

4 ай бұрын

Hey Conrad I agree 👍 my caddy and the T5 had the same horrible trim, it had to go. Thanks mate appreciate that

Cracking job there Nathan and thank you for the video. The darker grey finish really transforms the interior 👌. Have a great weekend mate - ah ye.

@YTDTETV

4 ай бұрын

Hey Karl thank you sir 🙏 always appreciate your comments 👍 I hope you have a great weekend to sir

Nathan is back on his feet and rules KZread ❤❤

@YTDTETV

4 ай бұрын

Hey francis ah ye 🤙 I’ve said it before but I’ll say it again DTE is just 3 letters without followers like you so thank you for supporting me ❤️🙏👍

Wow that has made a huge difference, looking great.

@YTDTETV

4 ай бұрын

Thank you sir appreciate that 👍

Really, looking forward to watching more of these interior vids...Job well done mate!!

@YTDTETV

4 ай бұрын

Thanks mate appreciate that 👍 I’m looking forward to the inside being abit nicer.

Great finished look 👍

@YTDTETV

4 ай бұрын

Thanks Clive appreciate that mate 👍

Mate your absolutely smashing it, iv watched alot of the matt armstrong stuff content is good but like you say its unrelatable, iv started doing bits on my focus, inspirational mate top work.

@YTDTETV

4 ай бұрын

Hey bud thank you I super appreciate that 👍 I do my best with what I can afford, I’ve watched a few KZreadrs go from zero to hero and the content changes. If I even make it big I’ll stay the same I promise but I will treat my caddy and T5 to some nicer wheels 😂👍

@lloydredsull1409

4 ай бұрын

Your content is brilliant. I learnt a lot, I must say. Keep um coming mate.

big craic, love ur banter DTE, from IrishT6

@YTDTETV

4 ай бұрын

Thanks pal appreciate that 🤙👍👍

Yay! T5 update! Hope you’re well Nathan. Still waiting the day you let me buy this 😊

Class work mate, attention to detail ❤

@YTDTETV

4 ай бұрын

Thanks Keith 👍👍

Love a bit of old school dnb

@YTDTETV

Ай бұрын

Ah ye 👌

Ah yea as it should have been out the factory, top job mate 😊 old Matt Armstrong lives just up the road from me crazy stuff, prefer DTE budgets to all that ££

Yes mate, love me some DnB. Enjoying watching the progress!

@YTDTETV

4 ай бұрын

Thank you mate 👍 I can only listen to the older stuff but definitely makes the long job go easier

@J4k3028

4 ай бұрын

@@YTDTETV Yeah man, I listen to both new and old. Prefer the older jungle and old skool Jump Up, its all gone a bit strange now with some producers :(

Another great job Nathan

@YTDTETV

4 ай бұрын

Thanks mark 👍

Looking good again ❤top job sir

@YTDTETV

4 ай бұрын

Thank you Thomas 👍👍

Great work making Friday's even better 🤙

@YTDTETV

4 ай бұрын

Hey AK thank you mate appreciate that 👍 glad people enjoy the videos 🙏

Looking very nice, thanks take care, peace.

@YTDTETV

3 ай бұрын

Thank you mate 🙏👍

Absolutely spanking video Nathan helpful and informative as ever my guy. Bit of old school micky bumba clart finn for me fella. Keep doing what your doing mate the videos are sick stay blessed brother.

@YTDTETV

4 ай бұрын

Hey David thank you mate 👍 yes that tape hanging out the tape deck is exactly that, I don’t listen all the time just now and again, appreciate the comment 🙏

Really inspirational these vids, any chance of a "how to set up a spray gun" I've never had much joy with that dark art!!!!

@YTDTETV

4 ай бұрын

Hey bud thank you really appreciate that 👍 do you watch the bodywork videos I do? If so I’ll go over setting up paint guns in the next one 👍

As always you have the eagle eye Nathan , looks good can't remember if the steering wheel was golf mk5 ? No a/c on mine and manual windows but as is life .

Very informative content 👌🏻

ahhhh yeah shes getting better each day 👌👌👌

Fantastic progress

@YTDTETV

4 ай бұрын

Thanks Adrian 👍

@adrianhartshorne8779

4 ай бұрын

@YTDTETV do you happen to know ow ral code for dash in a 2019 t6 please

Yes mate great little touch dude looks brilliant mate, looks real tidy definitely great video mate

@YTDTETV

4 ай бұрын

Thanks Dean I’m happy with it am looking forward to getting the rest of interior done now 👍👍

@kaydentitford3628

4 ай бұрын

@@YTDTETV I bet mate will look epic

Always great videos 👍🏻👍🏻👍🏻🇬🇧

@YTDTETV

4 ай бұрын

Hey Ragnar thank you for always taking the time to comment mate I do really appreciate your kind words 🙏👍👍

@ragnarironspear1791

4 ай бұрын

@@YTDTETV not a problem I alway enjoy your videos.

Looks great that pal 👍

@YTDTETV

4 ай бұрын

Thank you mate 👍 appreciate the comment

Looks nice that dash Nathan all one colour

@YTDTETV

4 ай бұрын

Thanks David I’m happy with it, I’ve used to colour a few times and seems to match up close enough 👍

Looking good!

@YTDTETV

4 ай бұрын

Thanks bill 👍

Banging dobbo looks sweet ❤

@YTDTETV

4 ай бұрын

Thank you mate appreciate that 🙏

Keep em comin nathan👍

Looks wicked, I'm gonna have to do that on mine..

@YTDTETV

4 ай бұрын

Hey plumpi thank you mate 👍 I’ve just been been notified by the mrs I didn’t put a picture up of the paint, RAL 7024 with extra black. Easy enough good paint shops can make it up in rattle can form to 👍

You should try carpet on them. I did mine with with vinyl leather.

Nice job . 👍 Tony Laroni would be proud for sure. 🤣🤣🤣

@YTDTETV

4 ай бұрын

Haha yes Phillip 😂 thanks mate 👍

Been lookin forward to this 👍

@YTDTETV

4 ай бұрын

Thanks Dave appreciate that mate 👍

That’s a nice finish having it all the same colour Nathan.

@YTDTETV

4 ай бұрын

Thanks Michael 👍

End result looks fantastic, when you fitted the passenger side pieces you did paint the little rectangle piece but didn't paint the long airbag cover strip, that's why there was a slight colour difference, van is really coming on now.

@YTDTETV

4 ай бұрын

Hey Colin your right I should have put abit of colour on that, I have paint left for the roof pieces so will prob put some on it then. Thanks mate 👍

I just finished carpet lining and then carpeting the ply done the roof too all sound proofing and insulating makes a huge difference. My floor is 12mm ply with 3mm insulation and 3mm rubber top matting. I got transit triple seat in the 3rd row and transit double seat in the 2nd row With the drivers and the double passenger seat I now got 8 seats all with belts etc. I’ll inbox you some pics

@YTDTETV

4 ай бұрын

Hey bud that sounds good similar setup to what I’m planing just with one row of seats 👍 I’ll check out your pictures.

Looking great 👍 also sent a donation over

@YTDTETV

4 ай бұрын

Hey bud I received that thank you so much 👍 I really appreciate it 🙏

👍looks loads better

@YTDTETV

4 ай бұрын

Thanks mate 🙏👍 I see your video about airbrushing a dog the other day that was absolutely brilliant, my kids come and terrorised me right at the end so didn’t get a chance to comment. I’ll comment on the next ones 👍

@dredfxcustompaint

4 ай бұрын

@@YTDTETV 👍

oi oi .......dig out those rave tape packs , Jungel Fever,Roast,One Nation ,Helter Skelter to name a few..

@YTDTETV

4 ай бұрын

Yes Dave 🤙 that is the era I can listen to the newer stuff really don’t do it for me. Ah ye 👍👍

Love your transporter series! Would be great to retrofit the multivan/caravelle dash into one of these and install a nice android screen in there too. Plenty of kits available on the market. And the next mod after that - 3D ColorMFD! A ye!

@YTDTETV

4 ай бұрын

Hey bud thank you appreciate that 👍 yes your right they are a nicer dash, I have a company wanting to send me android stereos to try so I’ll make a wee video on that if it happens. Oh man I’ve seen those colour inserts for the clocks 👍 I’m on there page on FB and I have even messaged them, price is not bad at all but I don’t know if I have to soldering skills to fit it.

Love this idea of painting the lighter grey. Fantastic job done well. Do you think I can get the same affect with rattle can? As I don't have a sprayer.

@YTDTETV

4 ай бұрын

Hi bud thank you appreciate that 👍 yes for sure, you would need to go to and car shop that sells spray paints and look for one that is close enough to what it needs to be, could even take a small piece of trim with you to try and match it up. Some paint places can make any colour into a spray can maybe a Google search or phone around. Just clean the hell out of them with a degreaser I guess even washing up liquid is a degreaser and a red scotch pad and they clean and prep the plastic. Then get a tin of the plastic primer I showed in the video and give them a really thin light coat. Then with the paint just really thin light dusty coats to colour them up and your done 👍

like it👌

i'm not a liar, i just weren't thinking 😂 i'm using that one

@YTDTETV

4 ай бұрын

Haha I do waffle on sometimes 😂

Great video. But what kind of hradner did you use on the paint? Is it special for plastic ore only first spray coat is for plastic. I have light gray and it get so fast dirty.

@YTDTETV

4 ай бұрын

Hey bud thank you 👍 the hardener is just any HS paint hardener and all it does it gives the base coat abit of flexibility and durability. My pained bits are very similar to oe ones to touch and feel so shouldn’t catch dirt. I’ll up load a video short on here tomorrow explaining what I used and why 👍

Takk!

What colour spray do you use to paint and match all the plastics.

Great video mate, is it straight base coat or have you diluted it with thinners?

@YTDTETV

4 ай бұрын

A splash of thinners just so it comes out nice and not stodgy, the RAL colour is 7024 with a little more black in and I add a splash of hardener to make the base coat more durable 👍 thank you

How easy was it to get door cards off? Struggling with mine on the caddy mate.

👌

@YTDTETV

4 ай бұрын

Thanks mate 👍

Nice! Can you do mine too if I remove all the parts?!!! 😮

👌👍👍 Sorted

@YTDTETV

4 ай бұрын

Thanks again Archie 👍👍

👍

@YTDTETV

4 ай бұрын

Thanks ghetto 👍👍

That looks great. Did i hear right, you sprayed them with basecoat only? No lacquer? Ive used thinned raptor, sprayed smooth with my 1.3mm devilbiss before and it held up beautifully for years, but the sheen was always a bit more than OEM. Yours looks much better

@YTDTETV

3 ай бұрын

Thank you 👍 yep no lacquer just a tiny bit of any hardener in with the base coat to give the paint a slight bit of flexibility and it lasts very well. That’s a good idea of thinned down raptor 👍👍

@bespokedfurniture

3 ай бұрын

@@YTDTETV I've gotta try that! 👌👌

@YTDTETV

3 ай бұрын

@@bespokedfurniture I’m literally as we speak doing the sunvisors and grab handles for next weeks video so you’ll see how they come out to 👍

@bespokedfurniture

3 ай бұрын

@YTDTETV sweet 👌 just watched the wing mirror installation vid 👊

@YTDTETV

3 ай бұрын

@@bespokedfurniture awesome thanks 🙏 👍

What is the type of that paint? Two component car paint? Is it matt paint or half matt? Great build series by the way 😀

@YTDTETV

4 ай бұрын

Hi bud it’s a single stage base coat, base coat dries Matt, I added a drop of hardener to give the base coat abit of flexibility. Thank you appreciate that 👍

@samituomisto106

4 ай бұрын

@@YTDTETV Okay and thanks for the info. And greetings from Finland 👍

@YTDTETV

4 ай бұрын

@@samituomisto106 no problem shout out to 🇫🇮 👍👍

You not bothered about removing the bulk head lip?

@YTDTETV

4 ай бұрын

Hey James you have a keen eye sir 👍 yes I’ve looked at it multiple times 😂 when I do the rest of the inside I’ll pull all the seats and B pillar trims off and get the belt sander out to remove them 👍

@jamesibbo1

4 ай бұрын

@@YTDTETV 😂😂 only because I’ve done mine. It definitely looks cleaner without it.

@YTDTETV

4 ай бұрын

@@jamesibbo1 haha I said in my head a few times I’ll do it now then I look at all the welds and say I’ll do that another day 😂

@jamesibbo1

4 ай бұрын

@@YTDTETV only an hours work for a man of your caliber

Looking for a set of rear shocks for a mk4 caddy that is lowered the standard ones are bottoming out has anyone got any suggestions for shocks they are using

@YTDTETV

4 ай бұрын

Have you cut the bump stops down? I’ve lowered a caddy on standard shocks before with no issues, also the exhaust hits the axle sometimes when lowered

@potbell1

4 ай бұрын

@@YTDTETV have the bump stops cut I had shorter shocks in but the bushes were falling out so I put in standerd shocks in and now it’s banging when going over bumps

@YTDTETV

4 ай бұрын

@@potbell1 I wonder if it’s the exhaust hitting on the axle as I had that issue on one I lowered

@potbell1

4 ай бұрын

@@YTDTETV I’ll have a look tomorrow and see

6 speed conversion???

@YTDTETV

3 ай бұрын

Mines still only 5 speed and still going strong, if it ever fails I’ll do a 6 speed then 👍

Ah yeah

@YTDTETV

4 ай бұрын

Thanks peerless 👍👍

What was the RAL color code? He forgot to add a picture

@Ben.g762

4 ай бұрын

I believe its RAL 7024

@YTDTETV

4 ай бұрын

Sorry bud 7024 👍

@YTDTETV

4 ай бұрын

Spot on Ben 👍

like it👌