One thing that can be added to this is using a bit of gun lube on the moving parts, trigger ,barrel selector, spring slide ,and barrel pivot. Makes the action smoother .the unit comes with no lube on any moving parts.

Give this bloke a brake.does it matter if he takes it all to bits his way at least he has shown every thing.All he is doing is showing people how to do a mod and put every thing back together. I'm glad he took it all to bits at least we know what goes.iv took my barrels of And highly polished them. Iv done all mine but saying that good video. His a bit heavy buts that's him it's his gun. Again good video

Thank's for this video...very good😃

Thank you very much for doing this awesome video. It's exactly what I was looking for. 👍

@Robertpeace233

4 жыл бұрын

Glad I could help

@lightend100

4 жыл бұрын

@@Robertpeace233 I agree, I dont have one of these but I was interested in how to make it that bit more powerful. Thank you and keep up the good work

Nice work!

Great video 👍🏻👌🏻

Great video 💪

I have question, in the brass tube where in inserts into the Accumulator there is a ferrule that reduces the ID of tube have you tried leaving that out? I put it back when reassembling mine but might try a with it removed also maybe get a faster recovery. I just didn't see anything about that piece. Great video though thanks.

@brandonheisler9993

2 жыл бұрын

I i

Have you ever changed the valve port with the smaller one because I don't see it. Hope you can help. Thank you

Nextime just open it from the other side....

any idea how to get to 60J like the unrestricted umarex?

It sounded like u said (the f-stamped) model..is that the marking that tells you it is the 7 jewel version? I heard there was a marking that lets u identify the 7 from the 16 jewel but all my searches come up empty.

@Robertpeace233

4 жыл бұрын

Yes F stamped means the 7J version there should be a stamp on the marker somewhere around it

you dont need a tunig ventil?

Very nice job bro But what about The Rocketvalve??

@zookr

3 жыл бұрын

That valve doesn't even come with installation instructions

There is no need to strip it down as much as you did therefore not misplacing parts, and use circlip pliars and not long nosed. 👽

seems like learning by doing ;) but he knows it and thats what im looking for. but i think hes destroing more than he modifies

Nice video could have been better too much background noise but thank you

i dont get it, in german we have spezial plugs to make it not possible i guess i saw it o the t4e cal 50 vers....

Hi, Can you do this also with a 16joule version? Or is that part you removed out of the 7,5 joule version already out of the 16j version?

@Robertpeace233

4 жыл бұрын

Braros I don’t know if this would work for the 16 joule version I can’t say forsure I haven’t seen the internals but the 16 joule version and the 7.5 joule version are pretty different this mod would only make the 7.5 joule version shoot at max 300fps where the 16 joule version is shooting 350-400 out the box

@commiesnzombies

3 жыл бұрын

@@Robertpeace233 400 fps ? look out Antifa looting Rioters ,here i come

@WillieMcphee

2 жыл бұрын

@@commiesnzombies And racist insurrectionists too! :)

Any idea if drilling a bigger airway into the restrictor will be possible? I’d like more juice but not 300 from a fresh co2

@TheInflicted

3 жыл бұрын

Yes. One 3/16" port drilled on the back of the restrictor and another offset 60 degrees from the vertical should put the gun at ~280fps from a single barrel on a fresh cartridge, at least for me.

@jacobrackham432

3 жыл бұрын

You can buy new 20+ joule valves on eBay.

@TheInflicted

3 жыл бұрын

@@jacobrackham432 Got a link?

@jacobrackham432

3 жыл бұрын

TheInflicted - it’s on defcon paintball gear channel. Also you can buy unrestricted valves from Germany on eBay.

Hello. Great video! Can you help me with a problem? My T4E HSD 68 no longer holds CO2 pressure. Can you give me an idea on what could have broken? Thank you in advance.

@Robertpeace233

4 жыл бұрын

You might have lost one of small O rings or the small brass washer that keeps the O rings in place id check there first

@Juan-jj4hi

4 жыл бұрын

I’m having same problem co2 tank loses air when puncture :( loved it when it worked !!

@bongkaos5519

2 жыл бұрын

This is why so many airguns are ruined by people who diy......

This is a very messy unorganized way to do this very simple modification. There's no need to take apart the whole gun lol. You don't need to remove the barrel or that copper bar. You're more likely to lose something or damage something doing it this way. I'm glad I learned the easy way first. Don't use this method unless you're skilled at assembly/disassembly of parts.

@ElDiablo-kc9vk

4 жыл бұрын

Is there a video for a easier way mate

@Fetti_Sosa

4 жыл бұрын

@@ElDiablo-kc9vk should come up in the search there's only a few videos online

@TheInflicted

3 жыл бұрын

Copper bar?

what about a longer barrel? that would help immensely

Wouldnt the next upgrade be to increase the diameter ot the tube coming from the C02 canister? Maximum co2 from the bottle. Doesnt matter if you get two shots out of a canister as long as those shots count

@Robertpeace233

3 жыл бұрын

They sale a valve for home defense that shoots at a higher fps if that's what your looking for. This mod is mostly for those who played paintball that wanted a extra kick

so you can make a 16 joule version out of 7.5 joule?

@Robertpeace233

4 жыл бұрын

Im not sure. I havent opened a 16 Joule version to compare parts but it would probably have a different valve spring but thats just my guess

@mociczyczki

4 жыл бұрын

@@Robertpeace233thats why you shpuld use chronograph for such video than be everything clear but if you say 280 fps than everything depend on mass of projectile ., on lightest projectile 1,85 grams that be 6,6 jpoules but on 3 grams rubber ball that be 10,8 j so way above 7,5 j limits at 6,7 grams steel rubber that be 24j ! way above 7,5 j limits as well as 16 j limits so … whats projectiloe mass for which you give this numbers =280 fps ? ! .

@jacobrackham432

3 жыл бұрын

Yes you can there are vids on how to do it. And on eBay you can buy new valves that make them 20+joules

@adrianopictureszeni

3 жыл бұрын

@@jacobrackham432 please could You add the link?

Does this turn it up to over 12 ft lb?

@Robertpeace233

3 жыл бұрын

No it be closer to 4ft or 5ft but no where near 12ft

Is this the 7.5 joule version or the 16 joule version?

@Robertpeace233

4 жыл бұрын

romukauppias it’s the 7.5 joule version

@pharman1976

4 жыл бұрын

If you look closely, you will notice a small pentagon with an 'F' engraved on the right side of the barrel. That tells you, that it is the 7.5 joule version.

@romukauppias

4 жыл бұрын

@@pharman1976 okay thanks! Can you do this also to a 16joule version and make it even more powerful or is it the same gun only without that one part you removed on this video?

@brmbrm101

2 жыл бұрын

@@romukauppias 16J have no restrictor

And you are so clumsy 🤣😂🤣. 👽

So lowing to see people screw and unscrew. What a screwed up video this was. Thx.

Man why so complicated!!!!!!

Ventil wechseln?Das wär doch dann illegal in Deutschland!Wir argumentieren nicht ohne pause und es kommt nicht von ungefähr das wie aus der shotgun geschossen kommt.oja.Das muss keiner mit ner klein Nudel.Wir Könnens nicht jeden Recht machen is doch klar..... ähm ähm wann hab ich aufgehört es zu versuchen.grrr

@fredvomjupiter3166

4 жыл бұрын

Geh erst mal zur Schule bevor du was kommentierst, du Trottel. Noch lehren sie da deutsch.

@matthiasdiematzezimmerer6727

4 жыл бұрын

@@fredvomjupiter3166 machs dir am hals wenn du schläft.grrr