I ordered the 9100 for my tundra because of this video. Very cool to see all the features and see that they care bout their product and the attention to detail and quality of the product. Hasn’t arrived yet but very excited to get it installed.

Ok now I get it. I just recently started looking into various switch panels on the market and couldn’t believe the price point on this one compared to all of the others. The amount of functionality in this kit is amazing! I ended up going with a cheap one but when it wears out I’ll definitely upgrade to this.

Quite literally the perfect, ultimate switch/accessory controlling device. They thought of absolutely everything. Love it!

This was an awesome watch! Answered so many questions I had about the ability of your product. Planning to gut my Jeep and run everything off a panel.

This video answered all but one question, even if this system can’t do what I need on one function, it still does everything else I need.

Great explanation of the system. I’ll be a buyer. I was about to build a buss bar and relay box for my F150. Considering the cost of the my build and all of the added features in a SwitchPro... I’ll just buy a SwitchPro.

Absolutely going in my next 2 builds! Awesome piece of gear!

Amazing product. Just bought one. Can’t wait for it to arrive.

@switch-prosandoffroadengin2393

2 жыл бұрын

We appreciate your support!

I have this on my xterra, love it. Have my e-locker and some pod lights attached to it at the moment

Fabulous product! Just had an SP9100 fitted to my UK Ford Ranger!

You started to explain the extra programming in the 12 button vs 8 button and mentioned wig wag. You were distracted by a question and didnt mention any of the others. Can you list them here?

This is great! Love my system.

Switch Pro, Do you have a release date for the variable low voltage cut off? Ive got a diesel and want to have the cut off arround 12.7v. Great product

Switch Pro - set the BlueTooth antenna in the edge or face of the switch module. I am sure you could hide the antenna. In the alternative, don't hide it, make it part of the face design.

Wish you had high and low beam stickers, are there any 3rd parties that make other graphics for these?

I got the sp9100 can you guys make a video how to install a relay cause I got something that’s pulling 34 Amp which is more than the 80% capacity you guys ask about

So if there’s a problem with the Bluetooth antenna. Why don’t you make an extension antenna that goes with the harness so you can mount it under the hood? You’re already running the wires out there. I work with alarm systems and we use external antennas so you can move them to where you need them to get reception. Thanks

if more than 2 or more used are they addreessable to use in same app.

can two or more be used together, 2 for a Camper Trailer, and 1 of Truck, 1 on Side by Side. Generator Start, Solar charge, and last feedback alarms, alerts, warnings. Battery monitoring.?

Is there a option for wiring switches to control window motors, also does the 9100 have the 4pin lock code option?

@himesjon

2 жыл бұрын

That would be nice for my K9 with car windows

Have they figured out what he Bluetooth connectivity problems?

@switch-pros

3 ай бұрын

Hi there! We have solved all the Bluetooth connectivity issues that customers were experiencing with the new app. Please reach out to us at 949-581-2991 if you are still experiencing issues.

Any one know how to re-set the password on the app. Previous owner set up and can’t find anything online on how to reset.

Is the finger finder plate included in the 8 channel kit?

@oahu_mopar

8 ай бұрын

Yes

So I just got my 9100 this week and I’m starting to experiment with programming. I’m hoping someone can tell me if this is possible: Single tap = -bumper lights on Double tap = -bumper lights on -windshield light bar on Final single tap = -everything off. Can this be done with a single button? I’m assuming if it can, that button would need to be associated with one of the higher amp double wire circuits from 5 to 8 right?

@JeepTJay6

Жыл бұрын

Well…seems like this comment section is pretty quiet so I’ll answer my own question. No. I needed the RCR FORCE 12 for on-on-off functionality which I have now. Works great.

Wanting to use this for my racecar, do I need a switch to power my ecu and this ? Or will the ignition button turn on my ecu and everything else in the car ?

@switch-pros

Жыл бұрын

You can absolutely wire it to turn everything on. Call our Tech Support line at 949-581-2991 for detailed discussion and "how to."

What about the new 24 switch panel

@switch-pros

2 жыл бұрын

Unfortunately, the max system we make is 12 switches/17 circuits, and there are currently no plans for a 24 switch panel.

Sorry guys, Solid state transistors or not this is way over priced, under 1 hour of programming, hour circuit board design, Maybe 200 in Materials equals more than 300% markup? The reason some of the others use the relay pack is 1 safety meaning no large 1500w+ power and ground plains in the circuit area (Will catch fire before tripping 150a breaker if a direct short happens) relay cluster allows for individually fused circuits (Internally switch-pros unit is on individual circuits out but all pull from the 150a circuit input inside unit) 2. another reason others use relay clusters is that its very simple at the control unit like maybe 1 cat5 cable feeding the relay cluster you don't have the large wiring mess coming out of the unit , means give end user more options on where to mount the smaller unit. either way solid state or relay cluster the cost of manufacturing is about 6s it really bears down to what you think the customer may prefer. Relays vs ss system does not present a clear path to better quality or reliability both are subject to failure when overloaded. I prefer the relay systems simply because the Power distribution is not part of the main unit separated and easier to service if needed. And yes people the relays system can and will do the strobing features just as well that's not a ss transistor ability its a strobing program loop that can be added to any of them. Its all in the pricing if your prices where half of what they are id carry your line however do to the prices I see nothing special other than little more time in the programming passed off as special hardware. Not trying to bash their innovative thinking or quality of component I think its a good piece just don't agree with how it has been marketed. Is it something special? (No) is it priced fairly (No) Can someone manufacture one better with more functionality for less money (Yes) And yes I actually said more functionality seems the market of panel switches has stalled and should not have their are MANY other needed functions I know of still needs be added to these markets. But I will at this time keep that to myself just in case I decide to enter.

Lady came in and crushed it, I feel like she is the engineer in the relation ship, really knows her stuff.

I love capitalism...