I was actually wondering why you had less than 20! Not why you had more than one!! Lol I think the extra slide is from the versions with a clock in the scales. I think it's really just the XAVT and the traveler. I'm not positive, though. I really glad that you made this video. Because I have found this mod to be a little bit nerve-wracking for me for some reason. Now I might give it an attempt. Thanks for the shout out!!

@hitchpost5822

Жыл бұрын

Anne Hi you are correct it was for a special short pair of tweezers the head tilted the same way as normal ones and opposite the toothpick. Over the years there were several models with a screen in the front scale. Originally they just didn’t include tweezers. but then they came up with the short ones. Interesting though the scales were made from a different plastic, more brittle. I replaced the back scale on an early Altimeter Plus model to add the tweezers and the old scale exploded into several pieces while trying to remove it.

@thevineclimber

Жыл бұрын

@hitchpost5822 wow, Hitch. That's interesting! Thanks!

Thank you for the tag Holmes and I love the scissors on the Super Tinker

@ConansEasyDadCarry

Жыл бұрын

Still such a great tool! Love my Deluxe with the pliers, but the Dessert Warrior really got me loving them again

That’s awesome! I had no idea about the secret slot. Looks easier to do than it sounds. Great video!

@ConansEasyDadCarry

Жыл бұрын

If even *I* can do it, then it's pretty easy to knock out 😂 Thanks for checking it out

Awesome video Conan 🔥 I think I need to pick up a Victorinox with yellow scales 😅 And also, I'm definitely going to open up the secret slot in all of my Swiss Army Knives 😉

@ConansEasyDadCarry

Жыл бұрын

I don't know that I've seen anything large with yellow, but I love being able to swap them out! Thanks for checking it out!

Felix is the guy!

@ConansEasyDadCarry

Жыл бұрын

He makes awesome stuff! Always entertaining to watch

Well done and yes, Felix is the man!

Very awesome!! I wasnt aware of the secret slot. Cool!

@ConansEasyDadCarry

Жыл бұрын

Wish there were other tools to put in there too, but it's cool to be able to fit at least *one* more in

That blue looks really really good with that yellow. Awesome choice !!!

@ConansEasyDadCarry

Жыл бұрын

Thanks! Love these tools!

@jamesfair9751

Жыл бұрын

@@ConansEasyDadCarry I was looking to get one for myself. It can’t decide which I want. I found some with pliers and scissors found one that even has slip joint pliers. I also want the electrician one very small but has two blades looks very handy. Also hard time finding yellow or any color other than red

@ConansEasyDadCarry

Жыл бұрын

@@jamesfair9751 - I'm actually doing a video about different saks and their features soon. Picking the "right one" is tough. I actually rotate through a few. As far as the scales, besides red and black, I recommend the link in the description for more colors and kits!

Cool mod. Toothpick is quite handy and not just for teeth.

@ConansEasyDadCarry

Жыл бұрын

Getting fuzz and debris out of charging ports has been the big one for me!

Cool mod and way simpler than I would've expected. Great video, thanks for sharing!!

@ConansEasyDadCarry

11 ай бұрын

Thanks for checking it out! And yeah- definitely worth the 10 minutes to add some extra function!

5:40 it’s soo true man, u sometimes get discouraged. Appreciate u fam, love from nj.

Love the yellow scales. They had them for the Vic Walker 84mm for like a whole week and now they're gone. If you did re profile the tooth pic would you use 3 different grits of wet sand paper, a dremel tool or just the file from the handyman? I've always been skeptical of small ferro rods. That is until I was gifted a Leatherman signal. It too has a small ferro . Then the use sank in. "Where's the Zippo? Where's the Bic?" In a pinch you still have a spark.

@ConansEasyDadCarry

Жыл бұрын

The toothpick will just be like I did for the Handyman. The file on the sak, and some 600 grit sandpaper I keep for general finishing. A small ferro rod is definitely not a replacement for an actual lighter by *any* means. But it *is* better than no lighter. A Spark is a spark!

I was able to convert regular scales to plus scales, no extra slot. I used a 2mm watchmakers screwdriver as a chisel for the pen slot and a .06 screwdriver for the pin slot. Slow and steady. What other SAK modifiers don't tell you is that the plus scales are thicker, 3.9mm at the pin opening vs 3.3 on regular scales where the pin hole will be. I also used the file on my ranger to make the opening for the top of the pen. You can buy complete plus kits for $30 plus dollars or just buy some pens for less money and do your own mods. Everyone has straight pins.

@ConansEasyDadCarry

11 ай бұрын

That's good to know! Always love to learn something new, and this whole modding thing is new territory for sure

@monkpato

5 ай бұрын

But they won't have the secret slot, will they?

I didn’t not know about the secret slot . Thanks for sharing , stay safe

@ConansEasyDadCarry

Жыл бұрын

It's fairly limited in use, but it's still a free slot! Thanks for watching!

You might get a toothpick from a 58 mm knife and see if it fits better. the main difference between the so-called small & large toothpick is the design of the head because of where the slot is in the scales. the small toothpick slot is in the middle of the end instead of to the side. so reprofiling might not have to be as drastic. That slot was designed for a special short pair of tweezers, I just put a small toothpick in the regular tweezers slot on a 91 mm knife it actually fit pretty well with out any modification. If you have access to a small toothpick you might give it a try and see what you think. I would be interested in knowing the results.

@ConansEasyDadCarry

Жыл бұрын

The head is definitely profiled differently, so requires less work to line it up. It's still a little long and needs some trimming at the end, but that's not the real problem. The head on the toothpick of the smaller tools is actually *thinner* than the standard large toothpick, and sits flush if not a little recessed on the 91mm scales. Makes it almost entirely impossible to pull it without another tool. Honestly, this has already felt pretty good!

@hitchpost5822

Жыл бұрын

@@ConansEasyDadCarry Thank you for giving it a try anyhow, I appreciate it.

@ConansEasyDadCarry

Жыл бұрын

@@hitchpost5822 - Thanks for the suggestion! I'd rather have tried and actually know!

I did the same with my Huntsman, opening up a second pinhole next to the original one for a sewing needle.

@Hadrada.

2 ай бұрын

How do you stop the sewing needle from falling into the scales and also is it easy to withdraw?

Great video!

Great video bud!

@ConansEasyDadCarry

Жыл бұрын

Thanks for checking it out!

Ok but if you have all these extra covers, how are you going to explain having to keep buying more knives? Cause you are going to have to buy more knives...

@ConansEasyDadCarry

Жыл бұрын

It's a dangerous circle. The only solution is to keep buying more SAKs to keep up, obviously 😁

i watched 3 other people try and take the scales off of these and they made it look like a nightmare... this looked like cutting cake....

@ConansEasyDadCarry

6 ай бұрын

To be fair, these were pretty new scales/saks, so it may get harder over time as they collect grime inside and the plastic swells and warps. If I have trouble in the future I'll probably try the soaking thing, but it was way easier than I thought it would be.

Would the small toothpicks fit so you dont have to trim?

So many people need a toothpick that's not any good anyway , but with your pocket knife I've made thousands of toothpicks that work much better than plastic rubbish😮

You don’t have to cut the toothpick