Swapping Pit Bike Motors - Part 2, Mounting Piranha 140cc
Installing new Piranha. Part 1 - Removing the old motor is here - • Swapping Pit Bike Moto...
Жүктеу.....
Пікірлер: 89
@paulroyal17652 жыл бұрын
I had just about given up on finding a video where someone just performs the task at hand without endless rambling. good job, thanks.
@Boufey317 жыл бұрын
Definitely saving this video for when I do my swap. Steady camera, and really easy to follow, even without saying anything. Thanks!
@rormoxwell40776 жыл бұрын
Who loves this hobby
@MakeTheNoiseMTB11 жыл бұрын
Cheers for taking the time to make this series and post...
@n1bpd12 жыл бұрын
It's a hybrid pit bike/downhill mountain bike - there's a jack shaft which changes the drive side over from the left to the right to be compatible with the mountain bike hub/disk brakes on the rear wheel. The bike is a Motoped, I have a few other videos and they have a website too.
@reneerothwell89725 жыл бұрын
Hey, i just ddid my swap and i put a brand new pinanha 140 into my ssr, whats the deal with these reasr clutches. Mine doesnt work at all. When i pull it in while in gear the bike wont roll at all....is there something i have to do to it? I dont have a bolt on the top of the clutch arm like some bikes, so i dont even know how to check into it
@thanasistournatzis73857 жыл бұрын
this engine can be fitted to a small motorbike,can it?also...how much horsepower u get?
@qryptikworld83796 жыл бұрын
your camera quality is great?😅for 2012
@danielkerr4100
4 жыл бұрын
Why would it matter if it's from 2012? I don't get it you act like cameras were bad only 8 years ago when they're exactly same quality they are now
@n1bpd12 жыл бұрын
Yup, I'm still breaking it in - once that's done I will post a video. It wont be a good show tho as I'm not that good a rider.
@sjonkers969 жыл бұрын
What is the little black tube for that you tug away in the frame @ 2:14? Does is carry oil and where does it plug in to? Thx
@n1bpd
9 жыл бұрын
Sven Jonkers Thats just a crank case breather tube, it doesn't connect to anything. It lets air out of the crankcase when the piston is in a downstroke, otherwise it would get pressurized and blow gaskets. There may or may not be a little metal clip for it to pass through that just keeps in place pointed down.
@sjonkers96
9 жыл бұрын
thx man
@n1bpd11 жыл бұрын
It's a "Motoped", cant post the link to their website, but if you search on google for motopeds the first result is their site. There are a few videos on KZread about them too, some mine, a few from the maker and a couple from a distributor.
@joelverdin13106 жыл бұрын
Compre un piranha 150cc eléctric start Que carburador le puedo poner Es para mi sachs madass
@n1bpd11 жыл бұрын
Recording audio as I record the video made the editing process more difficult as I then have to take into account the audio & the video and make sure they made sense (couldn't cut a scene if I was still talking and couldn't re arrange scenes, re shooting a part if I dropped a wrench etc is more difficult etc) I tried recording audio during the editing process, I'd have to do multiple attempts to get it right and wasn't worth it. Some people are good at that, I'm not one of them unfortunately.
@haseeb26587 жыл бұрын
Is this the same for all engines? Like 110 125cc
@dubclubtv3269
7 жыл бұрын
Haseeb pretty much, all pitbike engines are hasically the same
@azifkhan771811 жыл бұрын
yeah mate i really do like your bike i like the wheels they look like mountain bike wheels are they?
@xxnush3rxx9 жыл бұрын
I'm doing a pit bike project at the minute and I was just wondering if there is anything that I should know about as a heads up?
@n1bpd
9 жыл бұрын
Nick Usher The main issue is the poor documentation that you get (if any) with some of them. Keep track of the parts, I use partitioned trays and label each tray as I put stuff in it - where it came from etc. I also take video for youtube - but if I didnt I'd take photo's of each part as it came off so I'd have something to refer to. If you cant find torque/other specs then either look up the generic torque spec for that size bolt or buy download the Z50/CRF50 service manual and use those. Good luck !
@alecschaefer82447 жыл бұрын
Where in the harness do i wire in my kill switch? I made the 3 connections and am left with the yellow lighting wires and 1 black?
@n1bpd
7 жыл бұрын
Try grounding one lead of the kill switch and connect the other to the left over black wire.
@marcellusmills14994 жыл бұрын
What does the black hose that comes out the engine do?
@n1bpd11 жыл бұрын
I left it on Auto Focus instead of switching it to Manual. So instead of it being in focus on the Motor like I wanted, it kept trying to focus on me.
@camgroundpiston12 жыл бұрын
That looks like your still using a 1" exhaust on that, going up to a 140 you should go up to a 1 1/8" pipe and a straight thru muffler, you'll get alot more performance out of that motor - would be noisier though.
@chickenchicken-jm3sp7 жыл бұрын
Hey what was that rubber piece that went between the carb and the neck I'm trying to find one but can't. do you know the name of it or were you got it?
@knightnight0237
7 жыл бұрын
21chicken 21chicken intake manifold
@120hp660raptor9 жыл бұрын
most importantly can it lay rubber and can it do wheelies .
@saibabax8 жыл бұрын
That is such an amazing bike, great job man, respect.
@KingMann18048 жыл бұрын
can i swap my apollo orion 125cc dirt bike engine into a 190cc piranha engine?
@themotochannelu.k5098
8 жыл бұрын
POSSIBLY MATE I HAD AN ORION MYSELF...THIERS ONLY ONE WAY TO FIND OUT !...IM BUSY CUSTOMISING MY NEW PIT NOW...GOT SOME VIDS ON MY CHANNEL IVE JUST STARTED...MORE PROJECTS COMING SOON...FEEL FREE TO CHECK IT OUT AND/OR SUBSCRIBE.
@carson5355 жыл бұрын
Very cool build
@JTAUTOS11 жыл бұрын
can i ask why you dont talk in your videos but i still like to watch them
@viniciussilva-yv2ze7 жыл бұрын
Friend I am Brazilian I saw your video I liked it a lot here we have a motorcycle of 100cc and parese muinto with this engine agore I answer this engine and 100cc or 140 cc here I will only make it to 125cc honda I have a pop100 here in brazil
@Mr26119412 жыл бұрын
you double chained it. man how did you double chain it.
@daniellillo40499 жыл бұрын
Sweet sound man! Good Job!
@GoProBermuda11 жыл бұрын
those are some damn nice welds, i must admit.
@alexandre02395 жыл бұрын
Sou do Brasil onde compro esse motor??
@lukeattanasio64137 жыл бұрын
What is the black hose thing you tucked away at 2:14. Do you know its name or its purpose?
@n1bpd
7 жыл бұрын
It's a breather for the crankcase. When the Piston moves up and down it would also compress the air in the crankcase without one. A pressurized crankcase would lead to leaks and also present unnecessary resistance to the Piston.
@lukeattanasio6413
7 жыл бұрын
Thanks for the fast reply.Would you know if I could attach a fuel pump to that hose and use it as the vaccum line?
@nickpepper4458 жыл бұрын
What the black rupper piece you put on to the intake where the carb connects
@Sms8668
5 жыл бұрын
Nick Pepper www.ebay.com/i/292922363463?chn=ps&ul_ref=https%253A%252F%252Frover.ebay.com%252Frover%252F1%252F711-117182-37290-0%252F2%253Fmpre%253Dhttps%25253A%25252F%25252Fwww.ebay.com%25252Fi%25252F292922363463%25253Fchn%25253Dps%2526itemid%253D292922363463%2526targetid%253D474173583789%2526device%253Dm%2526adtype%253Dpla%2526googleloc%253D9007218%2526poi%253D%2526campaignid%253D1669934831%2526adgroupid%253D65058350299%2526rlsatarget%253Dpla-474173583789%2526abcId%253D1139296%2526merchantid%253D108421835%2526gclid%253DCj0KCQjw19DlBRCSARIsAOnfRejLzsbY6kmKytA1ZfYTkozjDrk1z9Mireu_r1ceYrwb0BgXXREu2I4aAnHyEALw_wcB%2526srcrot%253D711-117182-37290-0%2526rvr_id%253D1935601852123%2526rvr_ts%253D22d0e8dc16a0ac1e7d718d86ffad895c
@chalupamsf6 жыл бұрын
This is a good video, im subbing without you having said a word
@ants006 жыл бұрын
Do you know if the electric start version fixed the same way? tboltusa.com/store/piranha-140cc-bottom-electric-start-semi-auto-start-engine-p-10616.html
@isaiaharmitage513311 жыл бұрын
hey what kind of bike is that and were can i find one and were can i buy one
@lukeattanasio64137 жыл бұрын
Then can I use the vent line as a vaccum line for a fuel pump?
@n1bpd
7 жыл бұрын
No, because its sometimes positive and sometimes negative pressure as the Piston moves up and down.
@lukeattanasio6413
7 жыл бұрын
ok thanks so then ill run a suction line out of the intake manifold thanks
@64maxpower11 жыл бұрын
In surprised motopeds arent way more popular than they are.they are way cool and practical
@joelverdin13106 жыл бұрын
Fue de gran ayuda para mi tu video Gracias
@jameswilcock12778 жыл бұрын
Thanks man this video really helping me out with my bike cheers fella
@muhammadrizwan80735 жыл бұрын
Bike 124 cc kaha se malls GI Bahi jaan
@asfbi4 жыл бұрын
Will a gpx160 bolt on?
@everydayhustle60108 жыл бұрын
What's the top speed of the engine
@kittenman34 жыл бұрын
Stator cover gasket part #????
@oliverbradburn57276 жыл бұрын
14:15 what is that hole on the cylinder bit cos i've got it on my pit bike is it broken??
@n1bpd
6 жыл бұрын
It's a mount for a skid plate.
@oliverbradburn5727
6 жыл бұрын
n1bpd so it's meant to be there
@n1bpd
6 жыл бұрын
Yes
@braapmini20978 жыл бұрын
what site did you buy the engine on
@viniciussilva-yv2ze7 жыл бұрын
esse motor e 140cc ou 100cc
@huntingfishingthedelta19246 жыл бұрын
What clutch cable did u use
@n1bpd11 жыл бұрын
It's the vm26 (vm26-606)
@Jarok311 жыл бұрын
2 tips, 1, use threadlock on vital screws that are going to vibrate out, like the bwtween the manifold and the head. use nylon lock nuts on the exhaust (No, not the kind that melts, use the good kind) i woulnt class that bike as "ugly" but... odd maby :P
@kitajcekjohn11 жыл бұрын
Is that VM24 carb?
@everydayhustle60108 жыл бұрын
nice I want the 160cc
@n1bpd11 жыл бұрын
They are mountain bike wheels, check out motopeds dot com
@camgroundpiston12 жыл бұрын
Are you going to do a video of this in action with the 140?
@allahdinosiyalsiyal2450
6 жыл бұрын
camgroundpiston country
@allahdinosiyalsiyal2450
6 жыл бұрын
Country
@allahdinosiyalsiyal2450
6 жыл бұрын
Country
@jahmac15676 жыл бұрын
Can i use my 125cc electric starter on this motor?
@Dayton88
6 жыл бұрын
They make versions of this motor with kick start or electric start, check out what tboltusa.com has to offer.
@benjaminponce54788 жыл бұрын
este men usa llave tuvos nomas._.
@sangpham9288 жыл бұрын
ban lam rat ky
@azeemkhan32045 жыл бұрын
ok
@NshsShdh-jx9ob Жыл бұрын
👍👍🥰🥰🥰♥️♥️♥️
@killianmurphy52785 жыл бұрын
That's a fucking bike
@viniciussilva-yv2ze7 жыл бұрын
I do not know how to speak your language, I used the translator, if you talk to me, you put my name in the front.
@JasonBohl2 жыл бұрын
Those have to be the gayest pair of mechanics gloves I've seen someone wear.lol...
Пікірлер: 89
I had just about given up on finding a video where someone just performs the task at hand without endless rambling. good job, thanks.
Definitely saving this video for when I do my swap. Steady camera, and really easy to follow, even without saying anything. Thanks!
Who loves this hobby
Cheers for taking the time to make this series and post...
It's a hybrid pit bike/downhill mountain bike - there's a jack shaft which changes the drive side over from the left to the right to be compatible with the mountain bike hub/disk brakes on the rear wheel. The bike is a Motoped, I have a few other videos and they have a website too.
Hey, i just ddid my swap and i put a brand new pinanha 140 into my ssr, whats the deal with these reasr clutches. Mine doesnt work at all. When i pull it in while in gear the bike wont roll at all....is there something i have to do to it? I dont have a bolt on the top of the clutch arm like some bikes, so i dont even know how to check into it
this engine can be fitted to a small motorbike,can it?also...how much horsepower u get?
your camera quality is great?😅for 2012
@danielkerr4100
4 жыл бұрын
Why would it matter if it's from 2012? I don't get it you act like cameras were bad only 8 years ago when they're exactly same quality they are now
Yup, I'm still breaking it in - once that's done I will post a video. It wont be a good show tho as I'm not that good a rider.
What is the little black tube for that you tug away in the frame @ 2:14? Does is carry oil and where does it plug in to? Thx
@n1bpd
9 жыл бұрын
Sven Jonkers Thats just a crank case breather tube, it doesn't connect to anything. It lets air out of the crankcase when the piston is in a downstroke, otherwise it would get pressurized and blow gaskets. There may or may not be a little metal clip for it to pass through that just keeps in place pointed down.
@sjonkers96
9 жыл бұрын
thx man
It's a "Motoped", cant post the link to their website, but if you search on google for motopeds the first result is their site. There are a few videos on KZread about them too, some mine, a few from the maker and a couple from a distributor.
Compre un piranha 150cc eléctric start Que carburador le puedo poner Es para mi sachs madass
Recording audio as I record the video made the editing process more difficult as I then have to take into account the audio & the video and make sure they made sense (couldn't cut a scene if I was still talking and couldn't re arrange scenes, re shooting a part if I dropped a wrench etc is more difficult etc) I tried recording audio during the editing process, I'd have to do multiple attempts to get it right and wasn't worth it. Some people are good at that, I'm not one of them unfortunately.
Is this the same for all engines? Like 110 125cc
@dubclubtv3269
7 жыл бұрын
Haseeb pretty much, all pitbike engines are hasically the same
yeah mate i really do like your bike i like the wheels they look like mountain bike wheels are they?
I'm doing a pit bike project at the minute and I was just wondering if there is anything that I should know about as a heads up?
@n1bpd
9 жыл бұрын
Nick Usher The main issue is the poor documentation that you get (if any) with some of them. Keep track of the parts, I use partitioned trays and label each tray as I put stuff in it - where it came from etc. I also take video for youtube - but if I didnt I'd take photo's of each part as it came off so I'd have something to refer to. If you cant find torque/other specs then either look up the generic torque spec for that size bolt or buy download the Z50/CRF50 service manual and use those. Good luck !
Where in the harness do i wire in my kill switch? I made the 3 connections and am left with the yellow lighting wires and 1 black?
@n1bpd
7 жыл бұрын
Try grounding one lead of the kill switch and connect the other to the left over black wire.
What does the black hose that comes out the engine do?
I left it on Auto Focus instead of switching it to Manual. So instead of it being in focus on the Motor like I wanted, it kept trying to focus on me.
That looks like your still using a 1" exhaust on that, going up to a 140 you should go up to a 1 1/8" pipe and a straight thru muffler, you'll get alot more performance out of that motor - would be noisier though.
Hey what was that rubber piece that went between the carb and the neck I'm trying to find one but can't. do you know the name of it or were you got it?
@knightnight0237
7 жыл бұрын
21chicken 21chicken intake manifold
most importantly can it lay rubber and can it do wheelies .
That is such an amazing bike, great job man, respect.
can i swap my apollo orion 125cc dirt bike engine into a 190cc piranha engine?
@themotochannelu.k5098
8 жыл бұрын
POSSIBLY MATE I HAD AN ORION MYSELF...THIERS ONLY ONE WAY TO FIND OUT !...IM BUSY CUSTOMISING MY NEW PIT NOW...GOT SOME VIDS ON MY CHANNEL IVE JUST STARTED...MORE PROJECTS COMING SOON...FEEL FREE TO CHECK IT OUT AND/OR SUBSCRIBE.
Very cool build
can i ask why you dont talk in your videos but i still like to watch them
Friend I am Brazilian I saw your video I liked it a lot here we have a motorcycle of 100cc and parese muinto with this engine agore I answer this engine and 100cc or 140 cc here I will only make it to 125cc honda I have a pop100 here in brazil
you double chained it. man how did you double chain it.
Sweet sound man! Good Job!
those are some damn nice welds, i must admit.
Sou do Brasil onde compro esse motor??
What is the black hose thing you tucked away at 2:14. Do you know its name or its purpose?
@n1bpd
7 жыл бұрын
It's a breather for the crankcase. When the Piston moves up and down it would also compress the air in the crankcase without one. A pressurized crankcase would lead to leaks and also present unnecessary resistance to the Piston.
@lukeattanasio6413
7 жыл бұрын
Thanks for the fast reply.Would you know if I could attach a fuel pump to that hose and use it as the vaccum line?
What the black rupper piece you put on to the intake where the carb connects
@Sms8668
5 жыл бұрын
Nick Pepper www.ebay.com/i/292922363463?chn=ps&ul_ref=https%253A%252F%252Frover.ebay.com%252Frover%252F1%252F711-117182-37290-0%252F2%253Fmpre%253Dhttps%25253A%25252F%25252Fwww.ebay.com%25252Fi%25252F292922363463%25253Fchn%25253Dps%2526itemid%253D292922363463%2526targetid%253D474173583789%2526device%253Dm%2526adtype%253Dpla%2526googleloc%253D9007218%2526poi%253D%2526campaignid%253D1669934831%2526adgroupid%253D65058350299%2526rlsatarget%253Dpla-474173583789%2526abcId%253D1139296%2526merchantid%253D108421835%2526gclid%253DCj0KCQjw19DlBRCSARIsAOnfRejLzsbY6kmKytA1ZfYTkozjDrk1z9Mireu_r1ceYrwb0BgXXREu2I4aAnHyEALw_wcB%2526srcrot%253D711-117182-37290-0%2526rvr_id%253D1935601852123%2526rvr_ts%253D22d0e8dc16a0ac1e7d718d86ffad895c
This is a good video, im subbing without you having said a word
Do you know if the electric start version fixed the same way? tboltusa.com/store/piranha-140cc-bottom-electric-start-semi-auto-start-engine-p-10616.html
hey what kind of bike is that and were can i find one and were can i buy one
Then can I use the vent line as a vaccum line for a fuel pump?
@n1bpd
7 жыл бұрын
No, because its sometimes positive and sometimes negative pressure as the Piston moves up and down.
@lukeattanasio6413
7 жыл бұрын
ok thanks so then ill run a suction line out of the intake manifold thanks
In surprised motopeds arent way more popular than they are.they are way cool and practical
Fue de gran ayuda para mi tu video Gracias
Thanks man this video really helping me out with my bike cheers fella
Bike 124 cc kaha se malls GI Bahi jaan
Will a gpx160 bolt on?
What's the top speed of the engine
Stator cover gasket part #????
14:15 what is that hole on the cylinder bit cos i've got it on my pit bike is it broken??
@n1bpd
6 жыл бұрын
It's a mount for a skid plate.
@oliverbradburn5727
6 жыл бұрын
n1bpd so it's meant to be there
@n1bpd
6 жыл бұрын
Yes
what site did you buy the engine on
esse motor e 140cc ou 100cc
What clutch cable did u use
It's the vm26 (vm26-606)
2 tips, 1, use threadlock on vital screws that are going to vibrate out, like the bwtween the manifold and the head. use nylon lock nuts on the exhaust (No, not the kind that melts, use the good kind) i woulnt class that bike as "ugly" but... odd maby :P
Is that VM24 carb?
nice I want the 160cc
They are mountain bike wheels, check out motopeds dot com
Are you going to do a video of this in action with the 140?
@allahdinosiyalsiyal2450
6 жыл бұрын
camgroundpiston country
@allahdinosiyalsiyal2450
6 жыл бұрын
Country
@allahdinosiyalsiyal2450
6 жыл бұрын
Country
Can i use my 125cc electric starter on this motor?
@Dayton88
6 жыл бұрын
They make versions of this motor with kick start or electric start, check out what tboltusa.com has to offer.
este men usa llave tuvos nomas._.
ban lam rat ky
ok
👍👍🥰🥰🥰♥️♥️♥️
That's a fucking bike
I do not know how to speak your language, I used the translator, if you talk to me, you put my name in the front.
Those have to be the gayest pair of mechanics gloves I've seen someone wear.lol...
at 2.20 why is ur camera fucking around???
What’s the price of that engine
@bananagecko1342
6 жыл бұрын
tboltusa.com/store/piranha-140cc-engine-br-fits-pit-bikes-and-other-minis-p-660.html