How to Fix & Reset The SVC Tire Monitor. 2010,2011,2012 Malibu
Жүктеу.....
Пікірлер: 217
@dannyroywilliams7 жыл бұрын
Worked great for me after replacing one sensor on 2011 malibu. Tire shop couldn't reset, but this video did the job. Thanks!
@0SingingGurl08 жыл бұрын
Thanks for posting.. I told the mechanic at the shop that my TIRE SENSOR MONITOR light was lit on the dash. He said its most likely a sensor that needs to be replaced... $106 part & Labor! I was able to reset it with the help of this video. Thanks again!!
@mskudlarczyk
7 жыл бұрын
Baileigh Parker thats a rip mine is only costing 27$ and 10$ labor.
@Eap0323
5 жыл бұрын
Do you know how to activate new remote
@joshuafeighert9943
4 жыл бұрын
Eap0323 I don’t know if you’ve figured this out by now but 08-12 Malibu’s do not allow you to self program a key fob, I looked all over the internet and even went to my Chevy dealership and they said only the dealership can do it. How ever, do not buy the key fob from them, they tried to sell me my key fob for $85 and program it for $60. I bought my key fob off of eBay for $12 and got two of them, I had them program it for the $60 though lol.
@tomb79256 жыл бұрын
Just had tires rotated, I had the warning, you got me going again. Many thanks!
@MegaGingergirl7 жыл бұрын
Thank you for the video. I was able to fix myself. It took about 45 minutes, total. So worth it :)
@ryanfromsaneli3 жыл бұрын
I think you just saved me some money on replacing my tire pressure monitor system (TPMS) on my 2011 Chevrolet HHR after two years of saving money!!! THANK YOU!!!!
@aaliahfuller1609
4 ай бұрын
This was commented 3years ago did it ever come Back did it work for you ?
@ashur867 жыл бұрын
Thanks a lot. It worked on my 2012 malibu LTZ2
@JohnnyFnG847 жыл бұрын
Always start with the tires inflated to the proper range, that's what I do. Fill them all to say, 35psi. Then SLOWLY let the air out, the sensors are very sensitive, they need to register a change but if you let the air out quickly, it might not catch it. I've had tires filled right out the tire shop doors at 45 so "hey I'll do the relearn by releasing air down to normal" and that hasn't worked 3 out of 3 times! Weird huh? I've done this dozens of times across multiple Chevy vehicles. Fill to 35, let air or slowly for 15-20 seconds, You'll be successful... providing the sensors aren't dead ;) then re-inflate after they're properly programmed, have an air compressor handy or be at a gas station that has air when doing this.
@antoniosalazar1903
7 жыл бұрын
John Giallanza don't work for me
@eclipseshadowyt5917
Жыл бұрын
Second tire never beeps. But shows on the monitor so is it bad sensor ???
@yahyajanahi55325 жыл бұрын
Thanks man very useful and saved me a trip to the mechanic
@LiviNParadise
5 жыл бұрын
Help me by Subscribing, Thanks
@Charles_Finley775 жыл бұрын
I just bought a new (UESD) 2008 Malibu LTZ model and I can say it worked I just did it and took me about 4 mins ... thank you very much !!!
@LiviNParadise
5 жыл бұрын
Your welcome, subscribe
@Nicole-dj3jf
3 ай бұрын
Saving this video thanks 5 years later
@Nicole-dj3jf
3 ай бұрын
@@LiviNParadisehi no one answers there questions anymore I'm hoping you can please help me I have a 2011 chevy Malibu 3.6 ltz need to change oil pan! My question is,it this a hard job I can't find my year and engine anywhere no videos nothing at all
@Nicole-dj3jf
3 ай бұрын
Helplpp I cant pay 500 for this replacement if I can do it on my own I subscribe helpppp
@RLR302939 ай бұрын
Thank you for this video cause that light has been driving me crazy for a while.
@simplematthewshadows6 жыл бұрын
Thank you so much for this video and many blessing to you!⚡️
@julioalay70046 жыл бұрын
Great video man Very very helpful Thank you
@tee60987 жыл бұрын
Perfect, great video. thanks!
@dportstunna4208 жыл бұрын
livi N paradise I was wondering I just installed 22's on my car and had this light popped up all I got do is this on my 22's ?
@jaynj5439 жыл бұрын
Thank you! Worked like a charm. Saved me a trip to the dealer.
@BLKGURL19906 жыл бұрын
Thanks this was a big help
@onmygrind2156 жыл бұрын
I think I love you 😍 Was about to waste money on a new sensor smh
@jeffreywhalen85005 ай бұрын
Thanks it worked exactly as u said
@elmayor66110 жыл бұрын
thanks for this instrucion video help and save money
@mattfrazer32785 жыл бұрын
Hi there I have 2010 H H R Tire Service comes on few times got 2 new tires front need 2 back my Car Alarm doesn't work apply the same steps that you showed in the video thanks
@lennoxcooper388128 күн бұрын
Are you over inflating the tire then letting air out and horn beeping when tire reaches it correct tire pressure?
@jdgonz59807 жыл бұрын
does this work with a Pontiac g6 2010
@jahmalbrown5848Ай бұрын
So do you need to fill the tires with air first before releasing
@jasonblackard974410 жыл бұрын
What if your Keyless entry doesn't work - is there another way to start the process
@Osantosx4zmbs3 жыл бұрын
Hey I don't have the original lock keypad I have a viper auto starter will it work with that?
@wolverineforce20682 жыл бұрын
Hey quick question. What happens if the key is on the on/ off position ready to reset in the ignition. Push the unlock and lock buttons at the same time. Even though where the doors are unlocking and locking up. The horn doesn't make a sound.
@3amdearmond
11 ай бұрын
Any luck ?
@trezantrez10 жыл бұрын
Sho you let air out and.put it back in?
@kimkilley-neeb419910 жыл бұрын
What is the problem if it wont reset. I went by video which was exultant info.thanks
@the11diesel10 ай бұрын
Will this work on a 2009 Chevy Malibu? Also, what do you do if you don't have a key fob?
@FreshKicks45457 жыл бұрын
Won't let me do it my key fob says low battery. But brand new any ideas ?
@sianquerobines9903 Жыл бұрын
Is it going to work on chevy malibu 2008?
@Realest1ne3 жыл бұрын
I have a 2011 Malibu. When I held the buttons down it didn’t honk but the lights did start blinking. Any suggestions?
@Emreturk20128 жыл бұрын
Thanks Worked :)
@rodneyplummer38043 жыл бұрын
what if you 2 beeps of the horn, does that indicate a bad sensor ?
@abrahamd77236 жыл бұрын
Hello Friend. My Malibu did not detect the left front sensor LF, so I followed the steps of the video, but when something bad happens, I no longer detect any sensor, all the marks in white. Might you help me?? What I can do??
@letroyel3596 жыл бұрын
Will this work for a 09?
@karlbrim7388 Жыл бұрын
What brand sensor did you use?
@itsAktive8 жыл бұрын
Will this work on my 15 malibu
@jesusmolina1qprep1694 ай бұрын
What if i dont have the remote is there another way to do it ?
@himgirl68 жыл бұрын
Did the check engine light go away? I'm having the same issue, however I think the sensor in my tire is faulty so I'll probably have to replace it. The check engine light turned on right after I started having those issues.
@jgibz3213
2 жыл бұрын
shouldn't get check engine light, just tire icon light. Different problem. Need to keep an engine code reader in your Malibu at all times!
@datboyphil5 жыл бұрын
What if u have a aftermarket key pad ???
@marcomendiola69554 жыл бұрын
Does it’ work on a 2008 Malibu
@isiswilliams916610 ай бұрын
Wat to do if u don’t have the lock keypad
@AnthonyRodriguez-zw5pf6 жыл бұрын
I have a ? I have a 2011 Malibu and the svc light came on but I don't got a remote.would I have to buy a new remote or could I still do the process still
@LiviNParadise
6 жыл бұрын
you would need the remote. Subscribe
@sydney-ym7fs4 жыл бұрын
hi what if you don’t have a key dongle thing
@eclipseshadowyt5917 Жыл бұрын
Usually the second tire shows on monitor but it does beep; is it bad one ??
@raquelconner43210 жыл бұрын
Thank you for your video. Save me $100 bucks to fix the problem.
@josea.sanchez70724 жыл бұрын
What if you dont have a key fob
@Vonfrmdet
3 жыл бұрын
@Matias Krew did it work
@TheReel_Fisherman
2 жыл бұрын
Exactly
@ChaddyMack
2 жыл бұрын
Soooo?
@liettellsteven
Жыл бұрын
Some cheaper scan tools can put it into learn mode. I have a $400 can tool and it activates learn mode.
@kuruptsoul
11 ай бұрын
You buy a key fob
@alphamacho64017 жыл бұрын
Do you gotta do it for the 4 wheels if only one is the one that's messed up?
@LiviNParadise
7 жыл бұрын
Alpha Macho yes
@sleepe3618 жыл бұрын
nice worked for the left front and rear right but not for right and left rear.
@deedee337110 жыл бұрын
Going to try this tomorrow, hope it works for me!! Thanks for the awesome video. 1 question, Why do you inflate the 2 front tires first then deflate.....Than on the back you just deflate, Please explain?
@LiviNParadise
10 жыл бұрын
You wanna deflate or inflate drivers side tire first ClockWise. When hear a beep, you will need to go to the passenger tire and do the same thing. Work your way around. Good luck
@deedee3371
10 жыл бұрын
AHHHHHH...ty for responding!!!!
@LiviNParadise
10 жыл бұрын
Deflate or inflate all four
@angelsgv10305 жыл бұрын
My 2012 Chevy Malibu ls beeps twice on the third tire then the light for the fourth one never turns on like it did for all the others
@jeansilva27093 жыл бұрын
Teria como traduzir esse vídeo.
@lizardloverdrea8810 жыл бұрын
Is there anyway to do this without using your keypad? My lock button is no longer working on the keypad.
@LiviNParadise
10 жыл бұрын
I don't know
@racheldoane5793
4 жыл бұрын
Just open up your keypad and glue aluminum foil to the inside of the buttons. It will work good as new! Had the same problem with mine.
@theresapassarelli77644 жыл бұрын
Hello! I tried to follow this video, but when I did the first tire, it honks twice. I tried the second tire but it never did anything. Is that sensor just bad in the first tire? What could be happening? I did it multiple times.
@LiviNParadise
4 жыл бұрын
Yes, Sounds like a bad sensor. Ty Subscribe
@theresapassarelli7764
4 жыл бұрын
Thanks!
@TheDarkwind12310 жыл бұрын
How did you switch thru the menu at the end Thanks for posting by the way I been trying to get rid of the problem for a while now
@LiviNParadise
10 жыл бұрын
On the left of your Steering Wheel there should be a button that says (info) click that.
@horatiobennett64485 жыл бұрын
My 2009 HHR dopes not have a keypad (remote). What do i do?
@cjfoster1956
5 жыл бұрын
Horatio Bennett Bbl
@lindamullins84868 жыл бұрын
what if you don't have the key fob? Please tell me there is another way? Do i use the instructions key on the steering wheel?
@LiviNParadise
8 жыл бұрын
Sorry, no other way
@MegaGingergirl
7 жыл бұрын
Yes there is, follow the prompts through the instructions on the steering wheel. I just did mine today. I do not have a key fob. My car is a manual transmission, windows, etc...
@cheryldricchapman111
6 жыл бұрын
Linda Luna I need help to ...no key pad
@jeansilva27093 жыл бұрын
Não existe esse vídeo em português?
@davidcary33155 жыл бұрын
My tire sensor monitor has gone off but then my car heats up to the point of overheating. Not sure how there is a link but it's done it twice now. Ideas?
@LiviNParadise
5 жыл бұрын
Hmm, sounds like you have another issue. Take it to Auto-Zone and have them run a diagnostics, it's free. Thanks Subscribe
@briangonzalez48175 жыл бұрын
I did the process and was successful with air pressure at 40, but the SVC Tire Monitor appeared again. Now the LR tire shows the sign - -. All the rest show 40. Did I do something wrong? Do I need to redo the process?
@LiviNParadise
5 жыл бұрын
Try Resetting it again.
@jacquicethomas22532 жыл бұрын
I do not have a key fob what can I do?
@ahmedelshami89527 жыл бұрын
Thank you, i did the same and every tire did horn at the end the screen shows there is no pressure what should i do ?
@mskudlarczyk
7 жыл бұрын
Shmed Med mine is like that in one tire. i have a bad sensor. i have to take it to get a replacement. the sensor is not that expensive very cheap :)
@ahmedelshami8952
7 жыл бұрын
Maranda Nelson , exactly I realized i have a bad sensor too, yesterday my car was stopped while I'm driving it shows on the screen ( engine disabled ) took it to the shop, there is an electric petition with the car PC and it is fixed now
@cheezycheddar2112 жыл бұрын
What if you don’t have a key fob?
@alalexander52619 жыл бұрын
Thanks works as explained on a 2008 Impala LTZ
@dasiariley6637 Жыл бұрын
Once doing this did anyone’s pop back up after you reset? Wanted to know before I try🥺
@LiviNParadise
Жыл бұрын
it worked for me, however if it does come back on. then it could be your sensor on the wheel
@joseblancas14914 жыл бұрын
Is it possible to do without the keyfob ? (Unlock , lock control)
@courtneyjohnson7054
4 жыл бұрын
I am wondering the same thing
@ChaddyMack
2 жыл бұрын
I need answers, anyone figure it out?
@choppa5300
Жыл бұрын
??
@gabereyes71697 жыл бұрын
I have the key pad but when I hold it down the car never honks, why is that?
@imhimfr322
3 жыл бұрын
This here needs answers
@gaucho05 Жыл бұрын
So if it doesn’t work it means I need to replace the sensors I guess?
@connerbranstetter671712 күн бұрын
So what if I do the first tire and it beeps 2 times?
@jonnyjohnnsonn79232 жыл бұрын
What if i don't have my keyless entry
@xzii19 жыл бұрын
Awesome..but I tried it and at first my front tires and the right rear will honk so i did it again and now only my front tires would honk, I tried it all over again and still..its now showing blank for all the tires on my dash..any help?
@LiviNParadise
9 жыл бұрын
nana xzii You Must Follow These Instructions. Insert your Key into the Ignition & Turn it to On Position, But Don't Start The Car. Next, On your KEYPAD, Hold The Lock & Unlock Button for 5 Sec. Next, Driver Side Wheel, You Will Deflate or Inflate That Wheel until Your Horn Beeps, Go Around to the Passenger side & Deflate or Inflate until Your Horn Beeps. Next Will be the Passengers Rear Wheel. Follow the same steps & Next will be the last wheel. Once Completed your Horn will double beep. Good Luck
@LiviNParadise
9 жыл бұрын
nana xzii Make Sure To Subscribe.
@xzii1
9 жыл бұрын
FASTLIFE thank u, will try again
@sheenabaylon9871
6 жыл бұрын
Did this ever work for you? I'm having the same issue you had.
@j_carranza33
6 жыл бұрын
Sheena Baylon did u end up fixing it, bcuz I'm having The same issue
@michaelweis25655 жыл бұрын
Tried it on a 2011 Malibu. I was really hoping it would work, because I had only one sensor not reading after a tire patch. I tried it 3 times and now all the sensors are reading blank " -- ". Any suggestions?
@LiviNParadise
5 жыл бұрын
Try unplugging the power supply from the battery for like 30 seconds and then follow the steps again. Try that.
@michaelweis2565
5 жыл бұрын
@@LiviNParadise , Thanks for the info. Still getting the same result.
@LiviNParadise
5 жыл бұрын
@@michaelweis2565 Hmm, Are you doing it in the right order? Starting with driver front tire, Passenger front tire, Passenger rear tire and last driver rear tire.
@michaelweis2565
5 жыл бұрын
@@LiviNParadise Yes, Correct order indicated by the lights. Filling tires all up to 35 psi starting out, start the process with the key in auxiliary, hear the double beeps, leave the key in the same position, follow the direction of the lights indicating which tire to go to, deflate slowly until it beeps, last tire (driver side rear) deflate until a beep then double beeps. Last time I did it, I disconnected the battery for at least 30 seconds.
@LiviNParadise
5 жыл бұрын
@@michaelweis2565 , At this point. I have no clue. Might be a computer error in your vehicle .
@JANTH4 жыл бұрын
My LR one just wont get recognized
@jimm2031 Жыл бұрын
great video ut when i get to front passenger side, let almost all air out and get 2 beeps of horn. help 2012 chevy malibu
@ras47826 жыл бұрын
This sweet as fuck I'm going to do it today thank you so much for your video
@Cegtalk2u8 жыл бұрын
so I have this warning now. but it also doesn't read my RR tire. does that mean I have a bad sensor?
@JoseAndrade-fv2yz
8 жыл бұрын
I have the same issue with the LR
@Cegtalk2u
8 жыл бұрын
+Jose Andrade my warning went out..all I did was check my tire pressure with a tire gauge on all 4 tires.. no more warning!
@Khaled.96210 жыл бұрын
Thank you. It worked with me.
@lkirksey68 жыл бұрын
Thanks so much!!
@KariCurry-fy9lq6 ай бұрын
What if you don't have keyfob
@patriciasousa54063 жыл бұрын
Quantas libras de ar seria o correto para o pneu aro 18?
@dennymcelhaney86526 жыл бұрын
Worked! Thanks!
@Tatortot31820 күн бұрын
Thanks...this flashing is driving me nuts.
@DavidFariasАй бұрын
I tried this method but remote control didn’t work like in this video
@jammiecagodfrey376310 жыл бұрын
I followed the video and all tires beeped except for one. All of my pressure monitors are showing a blank line now. What should I do?
@LiviNParadise
10 жыл бұрын
Try it again, all four tires must beep to complete.
@jammiecagodfrey3763
10 жыл бұрын
I tries again and again and again. It did't work on one of the tires. I read somewhere that it may be the sensor. I'm going to order a new stew with sensor and try it again. Thanks for your help.
@ritaoutlaw23003 жыл бұрын
What if you key lock button doesn't work on your car anymore
@LiviNParadise
3 жыл бұрын
I'd get a new one from the dealer. Subscribe
@LiviNParadise10 жыл бұрын
What you wanna do is, start by deflating or inflating the tire driver side first. When your car beeps, go to the passengers side & do the same thing. Work your way around the car clockwise. But remember to put the key on the on position and hold the lock n unlock buttons to start the program.
@reyesjose214
8 жыл бұрын
ok now i just did it and its still on!?
@LiviNParadise
8 жыл бұрын
the SVC Tire Monitor?
@reyesjose214
8 жыл бұрын
+Livi'N'Paradise yea its the samething i did all for wheels
@LiviNParadise
8 жыл бұрын
Sounds like a computer error.
@reyesjose214
8 жыл бұрын
Thats wierd it started yesterday and today i the bak tire because wen it started thats the tire dat it didnt have the percent of the air i cheked it and i saw that it had two nails so i went to tire shop and fixed it but its still tellin me the svc tire monitor
@thekingtroll22 жыл бұрын
my 2011 chevy malibu loses air pressure on all four tires. I tfilled them up and A week later, the warning lights came on they were low. RF 26 LF 29 Both rears 28. The car had 55,000 miles on it so I took it to get new tires. A week later the lights came on again. So I took it back and they said they put on new valve stems. About a month later, it started again. Tires are low pressure. LF 26 RF 28 RR 28 RL27. I can't believe it. I have to pump up the right front each week for sure. It was on 27 and a week later I went to go to the store and it said it was 22. How can 4 brand new ties with new valve stams lose air on all four tires? I have NEVER had a car do this. I don't drive much but that is still no reason to lose air, day by day when it's garaged. Now it's doing it about every three days I have to pump up the right front tire to 30 psi. It says 30psi but when I googled it just now a lot of sites say a 2011 should be 35psi. I'm lost.
@alaraalvarez74463 жыл бұрын
What about if your remote don't work ?
@LiviNParadise
3 жыл бұрын
I don't think there's another way.
@phillipm37995 жыл бұрын
Mine was saying this first now it's saying service ESC. Can't wait to trade mine off.
@hermanduenne50428 ай бұрын
I don't have key less entry
@m_lacross69542 жыл бұрын
what if you only have a manual key
@lvmag323
Жыл бұрын
I got a remote key fob from autozone for around $50, it comes with a keyless entry fob and an installer. It all took less than 2 mins to program it yourself.
@alexchandler68348 жыл бұрын
okay I do not have keypad so how would I access the dash board? I too am trying to get mine off
@LiviNParadise
8 жыл бұрын
Without the keypad, there's no other way.
@ramiigbaria245
7 жыл бұрын
you can by scan diagnosic tool you need car electician for that
@pR1MeYwL996 жыл бұрын
It came back.
@LiviNParadise
6 жыл бұрын
You have a bad censor on one of your wheels.
@jaimejones31778 ай бұрын
I just put on snow tires, they're all at the proper psi, but my 2010 Malibu will not register it on my dash. Just shows the blank slots. I'm going to try and reset everything by disconnecting the battery and turn the key on and off twice... Then reconnect the battery... hopefully that will clear the alarms and reset the psi readings. We'll see. Is this a normal issue with snow tires?
@mistykristek24535 жыл бұрын
use kzread.info/dash/bejne/gpahrdJ8qLu_gKw.html if you don't have remote. Basically you press the info and reset buttons on left side of steering wheel for one sec. and it will go to another menu, scroll to tire learn and press enter then proceed as Livi'N'Paradise has so kindly shown to clear code and relearn each sensor for location. I has same issue pop up when replacing dead battery. Hope this helps. I would suggest checking out the other clip I have in this comment for starting the process. Both very helpful and don't forget to subscribe to help Livi'N'Paradise. Thanks to everyone who posts these helpful videos!!
@LegendaryDFault3612 жыл бұрын
Can't get it to honk twice at the beginning
@LiviNParadise
2 жыл бұрын
Watch the entire video before proceeding.
@bricknmotor Жыл бұрын
It would be cool if just once a trick would work for me any vehicle ever.
@randomvideos3241
Жыл бұрын
I feel that man 😂
@highdb12 жыл бұрын
I don’t have a key fob. How do you make it work without a key fob?
@sarimccraven1517
2 жыл бұрын
Same
@bluemonza1
2 жыл бұрын
You can't push lock and unlock at the same time without a key fob.
@richdiscoveries
Жыл бұрын
If you don't have a key fob, then you need a scanner to go in and do it
Пікірлер: 217
Worked great for me after replacing one sensor on 2011 malibu. Tire shop couldn't reset, but this video did the job. Thanks!
Thanks for posting.. I told the mechanic at the shop that my TIRE SENSOR MONITOR light was lit on the dash. He said its most likely a sensor that needs to be replaced... $106 part & Labor! I was able to reset it with the help of this video. Thanks again!!
@mskudlarczyk
7 жыл бұрын
Baileigh Parker thats a rip mine is only costing 27$ and 10$ labor.
@Eap0323
5 жыл бұрын
Do you know how to activate new remote
@joshuafeighert9943
4 жыл бұрын
Eap0323 I don’t know if you’ve figured this out by now but 08-12 Malibu’s do not allow you to self program a key fob, I looked all over the internet and even went to my Chevy dealership and they said only the dealership can do it. How ever, do not buy the key fob from them, they tried to sell me my key fob for $85 and program it for $60. I bought my key fob off of eBay for $12 and got two of them, I had them program it for the $60 though lol.
Just had tires rotated, I had the warning, you got me going again. Many thanks!
Thank you for the video. I was able to fix myself. It took about 45 minutes, total. So worth it :)
I think you just saved me some money on replacing my tire pressure monitor system (TPMS) on my 2011 Chevrolet HHR after two years of saving money!!! THANK YOU!!!!
@aaliahfuller1609
4 ай бұрын
This was commented 3years ago did it ever come Back did it work for you ?
Thanks a lot. It worked on my 2012 malibu LTZ2
Always start with the tires inflated to the proper range, that's what I do. Fill them all to say, 35psi. Then SLOWLY let the air out, the sensors are very sensitive, they need to register a change but if you let the air out quickly, it might not catch it. I've had tires filled right out the tire shop doors at 45 so "hey I'll do the relearn by releasing air down to normal" and that hasn't worked 3 out of 3 times! Weird huh? I've done this dozens of times across multiple Chevy vehicles. Fill to 35, let air or slowly for 15-20 seconds, You'll be successful... providing the sensors aren't dead ;) then re-inflate after they're properly programmed, have an air compressor handy or be at a gas station that has air when doing this.
@antoniosalazar1903
7 жыл бұрын
John Giallanza don't work for me
@eclipseshadowyt5917
Жыл бұрын
Second tire never beeps. But shows on the monitor so is it bad sensor ???
Thanks man very useful and saved me a trip to the mechanic
@LiviNParadise
5 жыл бұрын
Help me by Subscribing, Thanks
I just bought a new (UESD) 2008 Malibu LTZ model and I can say it worked I just did it and took me about 4 mins ... thank you very much !!!
@LiviNParadise
5 жыл бұрын
Your welcome, subscribe
@Nicole-dj3jf
3 ай бұрын
Saving this video thanks 5 years later
@Nicole-dj3jf
3 ай бұрын
@@LiviNParadisehi no one answers there questions anymore I'm hoping you can please help me I have a 2011 chevy Malibu 3.6 ltz need to change oil pan! My question is,it this a hard job I can't find my year and engine anywhere no videos nothing at all
@Nicole-dj3jf
3 ай бұрын
Helplpp I cant pay 500 for this replacement if I can do it on my own I subscribe helpppp
Thank you for this video cause that light has been driving me crazy for a while.
Thank you so much for this video and many blessing to you!⚡️
Great video man Very very helpful Thank you
Perfect, great video. thanks!
livi N paradise I was wondering I just installed 22's on my car and had this light popped up all I got do is this on my 22's ?
Thank you! Worked like a charm. Saved me a trip to the dealer.
Thanks this was a big help
I think I love you 😍 Was about to waste money on a new sensor smh
Thanks it worked exactly as u said
thanks for this instrucion video help and save money
Hi there I have 2010 H H R Tire Service comes on few times got 2 new tires front need 2 back my Car Alarm doesn't work apply the same steps that you showed in the video thanks
Are you over inflating the tire then letting air out and horn beeping when tire reaches it correct tire pressure?
does this work with a Pontiac g6 2010
So do you need to fill the tires with air first before releasing
What if your Keyless entry doesn't work - is there another way to start the process
Hey I don't have the original lock keypad I have a viper auto starter will it work with that?
Hey quick question. What happens if the key is on the on/ off position ready to reset in the ignition. Push the unlock and lock buttons at the same time. Even though where the doors are unlocking and locking up. The horn doesn't make a sound.
@3amdearmond
11 ай бұрын
Any luck ?
Sho you let air out and.put it back in?
What is the problem if it wont reset. I went by video which was exultant info.thanks
Will this work on a 2009 Chevy Malibu? Also, what do you do if you don't have a key fob?
Won't let me do it my key fob says low battery. But brand new any ideas ?
Is it going to work on chevy malibu 2008?
I have a 2011 Malibu. When I held the buttons down it didn’t honk but the lights did start blinking. Any suggestions?
Thanks Worked :)
what if you 2 beeps of the horn, does that indicate a bad sensor ?
Hello Friend. My Malibu did not detect the left front sensor LF, so I followed the steps of the video, but when something bad happens, I no longer detect any sensor, all the marks in white. Might you help me?? What I can do??
Will this work for a 09?
What brand sensor did you use?
Will this work on my 15 malibu
What if i dont have the remote is there another way to do it ?
Did the check engine light go away? I'm having the same issue, however I think the sensor in my tire is faulty so I'll probably have to replace it. The check engine light turned on right after I started having those issues.
@jgibz3213
2 жыл бұрын
shouldn't get check engine light, just tire icon light. Different problem. Need to keep an engine code reader in your Malibu at all times!
What if u have a aftermarket key pad ???
Does it’ work on a 2008 Malibu
Wat to do if u don’t have the lock keypad
I have a ? I have a 2011 Malibu and the svc light came on but I don't got a remote.would I have to buy a new remote or could I still do the process still
@LiviNParadise
6 жыл бұрын
you would need the remote. Subscribe
hi what if you don’t have a key dongle thing
Usually the second tire shows on monitor but it does beep; is it bad one ??
Thank you for your video. Save me $100 bucks to fix the problem.
What if you dont have a key fob
@Vonfrmdet
3 жыл бұрын
@Matias Krew did it work
@TheReel_Fisherman
2 жыл бұрын
Exactly
@ChaddyMack
2 жыл бұрын
Soooo?
@liettellsteven
Жыл бұрын
Some cheaper scan tools can put it into learn mode. I have a $400 can tool and it activates learn mode.
@kuruptsoul
11 ай бұрын
You buy a key fob
Do you gotta do it for the 4 wheels if only one is the one that's messed up?
@LiviNParadise
7 жыл бұрын
Alpha Macho yes
nice worked for the left front and rear right but not for right and left rear.
Going to try this tomorrow, hope it works for me!! Thanks for the awesome video. 1 question, Why do you inflate the 2 front tires first then deflate.....Than on the back you just deflate, Please explain?
@LiviNParadise
10 жыл бұрын
You wanna deflate or inflate drivers side tire first ClockWise. When hear a beep, you will need to go to the passenger tire and do the same thing. Work your way around. Good luck
@deedee3371
10 жыл бұрын
AHHHHHH...ty for responding!!!!
@LiviNParadise
10 жыл бұрын
Deflate or inflate all four
My 2012 Chevy Malibu ls beeps twice on the third tire then the light for the fourth one never turns on like it did for all the others
Teria como traduzir esse vídeo.
Is there anyway to do this without using your keypad? My lock button is no longer working on the keypad.
@LiviNParadise
10 жыл бұрын
I don't know
@racheldoane5793
4 жыл бұрын
Just open up your keypad and glue aluminum foil to the inside of the buttons. It will work good as new! Had the same problem with mine.
Hello! I tried to follow this video, but when I did the first tire, it honks twice. I tried the second tire but it never did anything. Is that sensor just bad in the first tire? What could be happening? I did it multiple times.
@LiviNParadise
4 жыл бұрын
Yes, Sounds like a bad sensor. Ty Subscribe
@theresapassarelli7764
4 жыл бұрын
Thanks!
How did you switch thru the menu at the end Thanks for posting by the way I been trying to get rid of the problem for a while now
@LiviNParadise
10 жыл бұрын
On the left of your Steering Wheel there should be a button that says (info) click that.
My 2009 HHR dopes not have a keypad (remote). What do i do?
@cjfoster1956
5 жыл бұрын
Horatio Bennett Bbl
what if you don't have the key fob? Please tell me there is another way? Do i use the instructions key on the steering wheel?
@LiviNParadise
8 жыл бұрын
Sorry, no other way
@MegaGingergirl
7 жыл бұрын
Yes there is, follow the prompts through the instructions on the steering wheel. I just did mine today. I do not have a key fob. My car is a manual transmission, windows, etc...
@cheryldricchapman111
6 жыл бұрын
Linda Luna I need help to ...no key pad
Não existe esse vídeo em português?
My tire sensor monitor has gone off but then my car heats up to the point of overheating. Not sure how there is a link but it's done it twice now. Ideas?
@LiviNParadise
5 жыл бұрын
Hmm, sounds like you have another issue. Take it to Auto-Zone and have them run a diagnostics, it's free. Thanks Subscribe
I did the process and was successful with air pressure at 40, but the SVC Tire Monitor appeared again. Now the LR tire shows the sign - -. All the rest show 40. Did I do something wrong? Do I need to redo the process?
@LiviNParadise
5 жыл бұрын
Try Resetting it again.
I do not have a key fob what can I do?
Thank you, i did the same and every tire did horn at the end the screen shows there is no pressure what should i do ?
@mskudlarczyk
7 жыл бұрын
Shmed Med mine is like that in one tire. i have a bad sensor. i have to take it to get a replacement. the sensor is not that expensive very cheap :)
@ahmedelshami8952
7 жыл бұрын
Maranda Nelson , exactly I realized i have a bad sensor too, yesterday my car was stopped while I'm driving it shows on the screen ( engine disabled ) took it to the shop, there is an electric petition with the car PC and it is fixed now
What if you don’t have a key fob?
Thanks works as explained on a 2008 Impala LTZ
Once doing this did anyone’s pop back up after you reset? Wanted to know before I try🥺
@LiviNParadise
Жыл бұрын
it worked for me, however if it does come back on. then it could be your sensor on the wheel
Is it possible to do without the keyfob ? (Unlock , lock control)
@courtneyjohnson7054
4 жыл бұрын
I am wondering the same thing
@ChaddyMack
2 жыл бұрын
I need answers, anyone figure it out?
@choppa5300
Жыл бұрын
??
I have the key pad but when I hold it down the car never honks, why is that?
@imhimfr322
3 жыл бұрын
This here needs answers
So if it doesn’t work it means I need to replace the sensors I guess?
So what if I do the first tire and it beeps 2 times?
What if i don't have my keyless entry
Awesome..but I tried it and at first my front tires and the right rear will honk so i did it again and now only my front tires would honk, I tried it all over again and still..its now showing blank for all the tires on my dash..any help?
@LiviNParadise
9 жыл бұрын
nana xzii You Must Follow These Instructions. Insert your Key into the Ignition & Turn it to On Position, But Don't Start The Car. Next, On your KEYPAD, Hold The Lock & Unlock Button for 5 Sec. Next, Driver Side Wheel, You Will Deflate or Inflate That Wheel until Your Horn Beeps, Go Around to the Passenger side & Deflate or Inflate until Your Horn Beeps. Next Will be the Passengers Rear Wheel. Follow the same steps & Next will be the last wheel. Once Completed your Horn will double beep. Good Luck
@LiviNParadise
9 жыл бұрын
nana xzii Make Sure To Subscribe.
@xzii1
9 жыл бұрын
FASTLIFE thank u, will try again
@sheenabaylon9871
6 жыл бұрын
Did this ever work for you? I'm having the same issue you had.
@j_carranza33
6 жыл бұрын
Sheena Baylon did u end up fixing it, bcuz I'm having The same issue
Tried it on a 2011 Malibu. I was really hoping it would work, because I had only one sensor not reading after a tire patch. I tried it 3 times and now all the sensors are reading blank " -- ". Any suggestions?
@LiviNParadise
5 жыл бұрын
Try unplugging the power supply from the battery for like 30 seconds and then follow the steps again. Try that.
@michaelweis2565
5 жыл бұрын
@@LiviNParadise , Thanks for the info. Still getting the same result.
@LiviNParadise
5 жыл бұрын
@@michaelweis2565 Hmm, Are you doing it in the right order? Starting with driver front tire, Passenger front tire, Passenger rear tire and last driver rear tire.
@michaelweis2565
5 жыл бұрын
@@LiviNParadise Yes, Correct order indicated by the lights. Filling tires all up to 35 psi starting out, start the process with the key in auxiliary, hear the double beeps, leave the key in the same position, follow the direction of the lights indicating which tire to go to, deflate slowly until it beeps, last tire (driver side rear) deflate until a beep then double beeps. Last time I did it, I disconnected the battery for at least 30 seconds.
@LiviNParadise
5 жыл бұрын
@@michaelweis2565 , At this point. I have no clue. Might be a computer error in your vehicle .
My LR one just wont get recognized
great video ut when i get to front passenger side, let almost all air out and get 2 beeps of horn. help 2012 chevy malibu
This sweet as fuck I'm going to do it today thank you so much for your video
so I have this warning now. but it also doesn't read my RR tire. does that mean I have a bad sensor?
@JoseAndrade-fv2yz
8 жыл бұрын
I have the same issue with the LR
@Cegtalk2u
8 жыл бұрын
+Jose Andrade my warning went out..all I did was check my tire pressure with a tire gauge on all 4 tires.. no more warning!
Thank you. It worked with me.
Thanks so much!!
What if you don't have keyfob
Quantas libras de ar seria o correto para o pneu aro 18?
Worked! Thanks!
Thanks...this flashing is driving me nuts.
I tried this method but remote control didn’t work like in this video
I followed the video and all tires beeped except for one. All of my pressure monitors are showing a blank line now. What should I do?
@LiviNParadise
10 жыл бұрын
Try it again, all four tires must beep to complete.
@jammiecagodfrey3763
10 жыл бұрын
I tries again and again and again. It did't work on one of the tires. I read somewhere that it may be the sensor. I'm going to order a new stew with sensor and try it again. Thanks for your help.
What if you key lock button doesn't work on your car anymore
@LiviNParadise
3 жыл бұрын
I'd get a new one from the dealer. Subscribe
What you wanna do is, start by deflating or inflating the tire driver side first. When your car beeps, go to the passengers side & do the same thing. Work your way around the car clockwise. But remember to put the key on the on position and hold the lock n unlock buttons to start the program.
@reyesjose214
8 жыл бұрын
ok now i just did it and its still on!?
@LiviNParadise
8 жыл бұрын
the SVC Tire Monitor?
@reyesjose214
8 жыл бұрын
+Livi'N'Paradise yea its the samething i did all for wheels
@LiviNParadise
8 жыл бұрын
Sounds like a computer error.
@reyesjose214
8 жыл бұрын
Thats wierd it started yesterday and today i the bak tire because wen it started thats the tire dat it didnt have the percent of the air i cheked it and i saw that it had two nails so i went to tire shop and fixed it but its still tellin me the svc tire monitor
my 2011 chevy malibu loses air pressure on all four tires. I tfilled them up and A week later, the warning lights came on they were low. RF 26 LF 29 Both rears 28. The car had 55,000 miles on it so I took it to get new tires. A week later the lights came on again. So I took it back and they said they put on new valve stems. About a month later, it started again. Tires are low pressure. LF 26 RF 28 RR 28 RL27. I can't believe it. I have to pump up the right front each week for sure. It was on 27 and a week later I went to go to the store and it said it was 22. How can 4 brand new ties with new valve stams lose air on all four tires? I have NEVER had a car do this. I don't drive much but that is still no reason to lose air, day by day when it's garaged. Now it's doing it about every three days I have to pump up the right front tire to 30 psi. It says 30psi but when I googled it just now a lot of sites say a 2011 should be 35psi. I'm lost.
What about if your remote don't work ?
@LiviNParadise
3 жыл бұрын
I don't think there's another way.
Mine was saying this first now it's saying service ESC. Can't wait to trade mine off.
I don't have key less entry
what if you only have a manual key
@lvmag323
Жыл бұрын
I got a remote key fob from autozone for around $50, it comes with a keyless entry fob and an installer. It all took less than 2 mins to program it yourself.
okay I do not have keypad so how would I access the dash board? I too am trying to get mine off
@LiviNParadise
8 жыл бұрын
Without the keypad, there's no other way.
@ramiigbaria245
7 жыл бұрын
you can by scan diagnosic tool you need car electician for that
It came back.
@LiviNParadise
6 жыл бұрын
You have a bad censor on one of your wheels.
I just put on snow tires, they're all at the proper psi, but my 2010 Malibu will not register it on my dash. Just shows the blank slots. I'm going to try and reset everything by disconnecting the battery and turn the key on and off twice... Then reconnect the battery... hopefully that will clear the alarms and reset the psi readings. We'll see. Is this a normal issue with snow tires?
use kzread.info/dash/bejne/gpahrdJ8qLu_gKw.html if you don't have remote. Basically you press the info and reset buttons on left side of steering wheel for one sec. and it will go to another menu, scroll to tire learn and press enter then proceed as Livi'N'Paradise has so kindly shown to clear code and relearn each sensor for location. I has same issue pop up when replacing dead battery. Hope this helps. I would suggest checking out the other clip I have in this comment for starting the process. Both very helpful and don't forget to subscribe to help Livi'N'Paradise. Thanks to everyone who posts these helpful videos!!
Can't get it to honk twice at the beginning
@LiviNParadise
2 жыл бұрын
Watch the entire video before proceeding.
It would be cool if just once a trick would work for me any vehicle ever.
@randomvideos3241
Жыл бұрын
I feel that man 😂
I don’t have a key fob. How do you make it work without a key fob?
@sarimccraven1517
2 жыл бұрын
Same
@bluemonza1
2 жыл бұрын
You can't push lock and unlock at the same time without a key fob.
@richdiscoveries
Жыл бұрын
If you don't have a key fob, then you need a scanner to go in and do it
How to do that without key????
@davidcary3315
5 жыл бұрын
Use a pen
@cedricgeorges5534
5 жыл бұрын
What do you mean by use a pen