For more info, Subscribe to this channel, join us at PsionicAudio, or email us at info@psionicaudio.com.
Жүктеу.....
Пікірлер: 36
@jamesbarrick34033 ай бұрын
I appreciate the effort you went through. Let's be clear, I have watched close to 30+ reviews nobody complained about these connections.
@tedmich2 жыл бұрын
A good tip Lyle! FYI the actual Switchcraft parts, P10149X (toothed washer) and P10001 (3/8-32 panel nut) are about $0.20 each at Mouser! They're made of nickel plated copper bronze, very conductive and corrosion resistant.
@BradsGuitarGarage2 жыл бұрын
Holy F, a customer literally just inquired about one of these and I couldn't find a gut shot anywhere. Lyle to the rescue once again!
@dennisflock39582 жыл бұрын
Doing it this weekend. Thanks, Lyle. Love the channel.
@sassycat5 ай бұрын
Picking up a packet of these tomorrow for my DK8.
@jacobbockover16282 жыл бұрын
Thanks. I do not have a supro blues/delta king but its one of the few amps ive got a green light to put in the living room
@handlethisyoutube2 жыл бұрын
Thank you. Great tip. Effort/Benefit ratio muy alto.
@0512matt2 жыл бұрын
Thanks for the vid! It's on my list whenever I get a chance to pull the chassis next. Can you recommend any other convenient upgrades for this amp?
@Satchmoeddie2 жыл бұрын
I have an old Mac 3/8 drive toothless spinner handle and a 1/4 inch drive ratchet adapter so I use & have used socket wrenches on jacks too. They work out the best for me.
@Satchmoeddie
2 жыл бұрын
Klein made some big nut drivers that are pretty nice too. 9/16 and 5/8 inch are open stock additions to their SAE set. A little pricey but worth it.
@renodavid2 жыл бұрын
Great advice I wish I had learned about 40 years ago.😭
@PittsS2C12 жыл бұрын
Excellent tip.
@thatampguy4 ай бұрын
Dude I just wrapped up one and was shocked Supro couldn't be bothered to add these themselves.
@Splattle1012 жыл бұрын
Good, basic info. 👍
@oldguy53812 жыл бұрын
Proper tools for the job,
@roncarter21882 жыл бұрын
OK Lyle I work at Home Depot so I have no excuse but to get some....thanks.
@jeffreyjones1295 Жыл бұрын
I own one of these sounds good cranked a little. Does it have the life expectancy of a tracfone?
@henryb1608 ай бұрын
Thanks for this. Can you tell me how the speaker in this combo is connected to the amp? Is it attached via a 1/4 jack? I want to use the Delta King 12 as an occasional speaker cab for my Katana mk2 head. Grateful for any info you can give.
@michaelmenkevich57122 жыл бұрын
Lyle is one of the best techs in the nation. I just wonder why not have an inventory of parts? Resistors, capacitors, pots, jacks, tubes, etc. Why order parts as needed? Shipping charges are out of control these days.
@PsionicAudio
2 жыл бұрын
Thanks Michael. I do have a large inventory, but it's nowhere near as large as it was pre-Covid. Availability has steeply declined and prices have multiplied. The behind the scenes supply issues are kind of frightening right now.
@michaelfuller342 жыл бұрын
What about when you are fixing that rushing water sound? Is it ok then? #pipewrenchfix
@ctcards26362 жыл бұрын
Best $1 ever spent ;-)
@jamesadams1064 Жыл бұрын
Would I be better off with a Fender Blues Jr for a few dollars more?
@christianboddum87832 жыл бұрын
That would be 10mm. washers in metric, I buy a bunch from time to time ;-) The actually are about a half mm. oversized for CTS pots but no biggie ;-)
@Satchmoeddie
2 жыл бұрын
10mm or 3/8". I like using deep sockets for some reason. It gets my knuckles up & away from the panel without using those wobbly extensions.
@WASAPTITO2 жыл бұрын
does this upgrade make the tone improvement? thanks
@mississippijohnfahey7175
Жыл бұрын
Yes. So does the quality of the leather your guitar strap is made out of. Oh and your hair color/style
@richclayton57852 жыл бұрын
You appear to be a strong fellow I think the leverage provided by that ratchet would strip threads. Perhaps a nut driver would be a better choice?
@PsionicAudio
2 жыл бұрын
Won't strip a Switchcraft open frame jack. But a nut driver is fine too.
@retread1083
2 жыл бұрын
Good call, Rich. A seasoned veteran like Lyle has no doubt developed a feel for the torque appropriate for various parts including brass bushings and flimsier jacks. For those less experienced, a nutdriver is more self-limiting. Or palm the ratchet at the pivot point.
@simmo422 жыл бұрын
3/8 is as close as damn to 10mm fwiw
@andrewmayton58402 жыл бұрын
1000% tone improvement too
@WASAPTITO
2 жыл бұрын
how was the improvement in tone ? thanks
@xeff32809 ай бұрын
On the input jack, what was that wire doing bridging the ground sleeve to another lug? Is it necessary? Edit: I figured it out, it's a shunt jack. Cool.
@dennisflock39582 жыл бұрын
Doing it this weekend. Thanks, Lyle. Love the channel.
Пікірлер: 36
I appreciate the effort you went through. Let's be clear, I have watched close to 30+ reviews nobody complained about these connections.
A good tip Lyle! FYI the actual Switchcraft parts, P10149X (toothed washer) and P10001 (3/8-32 panel nut) are about $0.20 each at Mouser! They're made of nickel plated copper bronze, very conductive and corrosion resistant.
Holy F, a customer literally just inquired about one of these and I couldn't find a gut shot anywhere. Lyle to the rescue once again!
Doing it this weekend. Thanks, Lyle. Love the channel.
Picking up a packet of these tomorrow for my DK8.
Thanks. I do not have a supro blues/delta king but its one of the few amps ive got a green light to put in the living room
Thank you. Great tip. Effort/Benefit ratio muy alto.
Thanks for the vid! It's on my list whenever I get a chance to pull the chassis next. Can you recommend any other convenient upgrades for this amp?
I have an old Mac 3/8 drive toothless spinner handle and a 1/4 inch drive ratchet adapter so I use & have used socket wrenches on jacks too. They work out the best for me.
@Satchmoeddie
2 жыл бұрын
Klein made some big nut drivers that are pretty nice too. 9/16 and 5/8 inch are open stock additions to their SAE set. A little pricey but worth it.
Great advice I wish I had learned about 40 years ago.😭
Excellent tip.
Dude I just wrapped up one and was shocked Supro couldn't be bothered to add these themselves.
Good, basic info. 👍
Proper tools for the job,
OK Lyle I work at Home Depot so I have no excuse but to get some....thanks.
I own one of these sounds good cranked a little. Does it have the life expectancy of a tracfone?
Thanks for this. Can you tell me how the speaker in this combo is connected to the amp? Is it attached via a 1/4 jack? I want to use the Delta King 12 as an occasional speaker cab for my Katana mk2 head. Grateful for any info you can give.
Lyle is one of the best techs in the nation. I just wonder why not have an inventory of parts? Resistors, capacitors, pots, jacks, tubes, etc. Why order parts as needed? Shipping charges are out of control these days.
@PsionicAudio
2 жыл бұрын
Thanks Michael. I do have a large inventory, but it's nowhere near as large as it was pre-Covid. Availability has steeply declined and prices have multiplied. The behind the scenes supply issues are kind of frightening right now.
What about when you are fixing that rushing water sound? Is it ok then? #pipewrenchfix
Best $1 ever spent ;-)
Would I be better off with a Fender Blues Jr for a few dollars more?
That would be 10mm. washers in metric, I buy a bunch from time to time ;-) The actually are about a half mm. oversized for CTS pots but no biggie ;-)
@Satchmoeddie
2 жыл бұрын
10mm or 3/8". I like using deep sockets for some reason. It gets my knuckles up & away from the panel without using those wobbly extensions.
does this upgrade make the tone improvement? thanks
@mississippijohnfahey7175
Жыл бұрын
Yes. So does the quality of the leather your guitar strap is made out of. Oh and your hair color/style
You appear to be a strong fellow I think the leverage provided by that ratchet would strip threads. Perhaps a nut driver would be a better choice?
@PsionicAudio
2 жыл бұрын
Won't strip a Switchcraft open frame jack. But a nut driver is fine too.
@retread1083
2 жыл бұрын
Good call, Rich. A seasoned veteran like Lyle has no doubt developed a feel for the torque appropriate for various parts including brass bushings and flimsier jacks. For those less experienced, a nutdriver is more self-limiting. Or palm the ratchet at the pivot point.
3/8 is as close as damn to 10mm fwiw
1000% tone improvement too
@WASAPTITO
2 жыл бұрын
how was the improvement in tone ? thanks
On the input jack, what was that wire doing bridging the ground sleeve to another lug? Is it necessary? Edit: I figured it out, it's a shunt jack. Cool.
Doing it this weekend. Thanks, Lyle. Love the channel.