This mode makes this product very close to perfection. I would like to suggest some features, however, that I believe would bring a lot of value to this controller: - SysEx (ability to send SysEx whenever you could send PC, CC or Note, which include different SysEx binary for each button event type, each page and each MIDI Channel). This for me would be a total game changer. - Ability to scroll through banks without selecting them, for example you can tap up up up to go to a certain bank number (it would show blinking in the interface) and then commit the change by pressing Bank+ and Bank- at the same time. This would make sense together with the next suggestion. - Ability to send multiple commands upon Bank Selection. This way you can set Bank as Song, Preset as Song Part. When you commit to a bank, you start your backing track and switch to your intro patch, during the song you use the preset buttons to toggle between the multiple parts of it. - Ability to have exact the same gestures but for a pair of buttons. For example, buttons A+B together would act as a completely new button, so we could have tap, long tap, release, long release for that pair. That makes more sense between buttons that are side by side or aligned vertically, of couse, but if memory is not a problem it could work for any combination of 2 buttons, which would increase the number of possibilities per page from 8 to 36.

As others have stated Super Mode is great!. One issue I have though is that in ledmode=normal, the initial LED state is wrong. On power up (or page change), the buttons all display their state 1 LED color. But they are not really in state 1 because pressing the button once sends the state 1 messages and the color remains the same. Pushing button second time sends the state 2 messages and color. On a third press (for a keytimes=2 button), it again sends state 1 message and color. So logically, the INITIAL color should be the LAST keytimes color, not the first. (Or maybe there could be an ledcolor0 setting for each button to set the initial color directly and not change the current behavior) Just a thought.

@briangraymusic

2 ай бұрын

Another comment on this. My comments above are based on the 10 switch model. I just picked up a mini 6 as well and it behaves slightly differently. On the mini 6, all buttons initialize to off on startup. So while this isn't as good as my suggestion of being able to define the initial state (or initializing to the "times" last state), in my case it works better than the 10 because I do interpret the last times state as an OFF state and my first state is an ON state (ie, CC value 0=OFF vs CC value 127=ON). So at least with the mini 6 the first click does correctly turn from visually OFF to visually ON. (I represent my OFF state with a single LED on the button and ON with all three, but all off is close enough to the single light off state to be ok). None of this is a big deal as I just have to click through all of the buttons on the 10 on startup (twice each) to get the LED to match my actual CC state, but a simple extra configuration to definite the initialize would be nice.

Great work! I'm really happy)) Will update asap and check it all)) thank you!!!!!!! ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

keep up the great work, thank you!

I needed a function to loop between 3 options in my vst plugin - Neural DSP Archetype Gojira X's AMP TYPE parameter. I was considering all kinds of hacky solutions, but It looks like you just added it! Thank you!

@Wilson-PaintAudio

3 ай бұрын

You can use three PC change to control the Neural Dsp which has an unique midi control system.

@casc1-cg4hr

3 ай бұрын

@@Wilson-PaintAudio interesting... i am using it in Presonus Studio One (Artist ed.), which exposes most of the midi controllable parameters in the plugin instance in each channel. The UI doesn't seem to register CC changes directly, but are you saying it only notices PC and not CC? Also please check your email, I sent you something I did to make editing the config files really easy!

Wilson, congratulations on the update; it's great to know that you are committed to improving your products. And what about the Midi Mate, will it support HID commands as well? And regarding SYSEX commands, should we expect them in supermode 5.0?

@Wilson-PaintAudio

4 ай бұрын

This feature is achievable, but we are just starting to prepare it. We will also fix the issue of MIDI MATE ignoring MIDI channels of different commands, but this will take some time.

hi . pleas include the Control the LED work as scene control, only we have tap, select and normal... but not LED control as scene control

I just updated mine and it's fantastic! I use MainStage with many guitar plugins, and this update has significantly enhanced my virtual rig. I think being able to customize the text displayed on the screen when pressing a button, rather than just seeing PC or CC, would be an excellent improvement.

@Wilson-PaintAudio

4 ай бұрын

Thank you for this feedback. Marked and let's see how to integrate it.

@benjamin.berthierGTR

4 ай бұрын

​@@Wilson-PaintAudio Thank you for considering my suggestion :). I'm experimenting with it and wondering if there will be more control over MIDI Captain using Control Change (CC) messages, similar to the functionality achieved with CC20, which is very useful with MainStage.

Hello Wilson. Super mode is awesome!!! But I would like to have several independent groups of buttons with select mode. Is it possible to do this? And one more thing... When turning the page by long pressing button 4 or button 9, the bank is also switched at the same time - this is a little inconvenient.

Hi Wilson tanks you , please added a control option in exp 1 and 2… for control pedal with footswitch like the foot captain swl !…please

Really happy with the new setup process with Supermode! I find it very powerful and intuitive. If I can suggest a feature for the future, I wish I could set my tap switch to send MIDI clock or send a continuously repeating CC command. Some VST plugins don't sync to the project tempo when switching presets. I want to keep everything synced up at all times!

On the download page, "Normal+Geek+Super 3in1 FW4.0" or "SuperMode FW 4.0" do not work for my MIDI Captain standard. I get load errors involving KEY color value of "RED" invalid. Only "Firmware 3.5" works for my MIDI Captain standard.

Hi Wilson! Thank you and your team so much for this incredibly powerful update! It really expands my ability to use some of my electronic gear. Would it be helpful if I made some videos demonstrating how to set up super mode (and how I'm using mine)?

@Wilson-PaintAudio

4 ай бұрын

Just release toturials (1)-(9) check my video channel. All are short videos.

Is there a way to sync the states of switches with effects on/off state on HX Stomp? I think the Stomp can send out the MIDI CCs when loading a snapshot, is it possible to make the MIDI Captain change the keytime state accordingly?

Hi , how can I have the led light lighter or dimming? Like minute 3:30 in the video …

Aloha ! I have not updated to super mode yet. I’m having a problem getting two pass through many time from my iPad USB through many too many devices. They’re not receiving the timing info for some reason. Any ideas?

The only thing that is missing in super mode is the possiblity with a message to go to another page. For example If I long press pedal C I want to go to the looper page, if I long press pedal B I want to go to the preset page etc etc. basically instead of long pressing the page up/ down button to have the possibility to put the bank switch in any footswitch

@Wilson-PaintAudio

Ай бұрын

It's a great idea to make the page jumping a message which is able to be assigned to any keys. Will try to add this in SP4.1 😄

@electronik808

Ай бұрын

@@Wilson-PaintAudio wow thanks!!!

@electronik808

Ай бұрын

in this way i can implement something like in the fractal fm3 where i have a "master bank" from where i can go to the presets, scenes, pedals and looper page and then come back!

Hi can we get feedback from the KPP via USB into the Captain?... i.e tap tempo, pacth names etc... great work

@Hellemmm

4 ай бұрын

It would not be hard to make led feedback I suppose, but to make screen feedback via midi cannot be a simple task... Names, looper states, images... There should be some kind of specification for that process...

@Wilson-PaintAudio

4 ай бұрын

The bidirectional communication version for the KPP has become a dedicated firmware version. I need to port it from the previous 6-pin version to the 10-pin version, which will also be released soon.

@MarkDanielsmusician

4 ай бұрын

@@Wilson-PaintAudio Cheers Wilson apreciate you taking the time ot look at this for us!

@MarkDanielsmusician

4 ай бұрын

@@Hellemmm Hi Its the USB version im asing about... no tthe std midi the KPP only has USB midi..thanks though

@zrkrlk

4 ай бұрын

Fantastic!!! congratulations!! I have a question... is it possible to program the leds in toogle mode so that when the effect (e.g. delay) is on, the light on the switch lights up, and when it is off the light is off... also, when I change the scene, is it possible to automatically turn on the lights on the effects that are already on...

it would be great to add a function for page switching in next way: short_dw1 = [page][+][1][ ]- for page increacement by 1 and short_dw1 = [page][goto][7][ ] - for page 7 targeting so we can switch pages fast, and have ability to make a page (entering with single button) with 10 pages to go from

@jworks6320

2 ай бұрын

It is possible

@jworks6320

2 ай бұрын

Thats what im using right now

@Hellemmm

2 ай бұрын

@@jworks6320 tell me more please)

Wilson, is there an issue with supermode and midimate for the 10 key pedal? Mine is still glitchy

hey Wilson, i tried updating my STD version to Supermode... there's an error in the coding

Do you know if this can work with HX stomp LOOPER controls?? Thank you!!

@Wilson-PaintAudio

2 ай бұрын

In SuperMode, there is a page mode just work for HX stomp Looper. kzread.info/dash/bejne/k6WX1sF8mafcedo.html

Will there be a pc or mac desktop editor?

Hi Wilson! First of all thank you! Question: I downloaded v4.0 but haven't installed it yet. I can no longer see the Setup and Geek folders: have they been deleted?

@Hellemmm

4 ай бұрын

I haven't updated, but as I suppose Super mode is a combination of geek+normal mode, so new super mode will replace old ones. Right?

@Wilson-PaintAudio

4 ай бұрын

This current version only includes the Supermode. We are also working on a 3-in-1 version that will be released a little later.😁

@georgeparrish4840

4 ай бұрын

@@Wilson-PaintAudio Could you create a Windows/Mac editor Thanks

请问在geek mode下能否使用time engine？我找了很多资料都没有找到相关内容，如果不行的话，是否可以考虑增加相应功能？在geek mode下的time engine可以实现更丰富的自动化控制，甚至可以替代几乎所有效果器助手，麻烦考虑下这个建议，谢谢！

@Wilson-PaintAudio

3 ай бұрын

抱歉time engine 只有在normal mode下有，一个困难点是，目前geek / super 再加入时间引擎确实不太容易，而且time engine在的情况下，也不宜进行太复杂的命令控制，也会降低时间触发的时机精度，我会想想是否有折中的办法。

@user-tj6zx7yy2f

3 ай бұрын

@@Wilson-PaintAudio 好的，谢谢你的回复~期待你的好消息！

Is it not still possible to program on the pedal itself? I appreciate the increased functionality but the whole reason I chose this pedal was to be able to program without a computer..

@Wilson-PaintAudio

3 ай бұрын

Geek mode can do it

mine is a gold with wireless, Installed the 4.0, I didn't update or change anything and and I'm having a black screen once pressing any program change.

@aleixobruno

4 ай бұрын

it looks like the 4.0 zip is too small comparing to the other geek mode versions, is this correct?

@Wilson-PaintAudio

4 ай бұрын

@@aleixobruno Previously, most of the program space was occupied by wallpapers. Now, we only retain one wallpaper. If you want to change the wallpaper, you can copy it from your computer. This way, program updates can be much faster and less prone to errors.

@Wilson-PaintAudio

4 ай бұрын

have you got it right?

@aleixobruno

4 ай бұрын

run_until_complete File "asyncio/core.py", line 241, in run_until_complete File "midicaptain0s.py", line 2918 in main File “asyncio/funcs.py”, line 113, in gather File “asyncio/funcs.py”, line 108, in gather File “asyncio/core.py”, line 241, in run_until_complete File “midicaptain0s.py”, line 2432 in keyCheck IndexError: bytes index out of range Code done running. this is the error on my screen

@aleixobruno

3 ай бұрын

@@Wilson-PaintAudio is there an issue with supermode and midimate for the 10 key pedal? Mine is still glitchy. Looks like something with the midi in. I use axe fx 3. Please see the error messages I posted on a different message below

Can someone respond to my support emails??

I installed it but found it very confusing. Went back to 3.4 Not having a editor is a deal breaker. It is very hard to understand how to program as you explain functions. It is not clearly explain how to seup as there is to much information and jumping around through different topics is confusing. I like the product but you need an editor and a clear way of how to edit.

@aleixobruno

4 ай бұрын

But did it work flawless with yours? Mine was unusable due to black screens

@Wilson-PaintAudio

4 ай бұрын

Just release toturials (1)-(9) check my video channel. All are short videos.

@georgeparrish4840

4 ай бұрын

@@aleixobruno Yeah it installed but Geek Mode and Time Engine were gone plus all the different setups I had. Went back to 3.O glad I saved the folder to my desktop

@aleixobruno

4 ай бұрын

There s a new version now which have all 3 functionalities that you can use. Unfortunately supermode is still not working for me, maybe because I use midi mate and there s some bug with it

@WordupG

3 ай бұрын

Why does the firmware update take over an hour to transfer 1.9Mb of files from my M1 MacBook Pro to the MIDI Captain? Several cords tried and same result.