AMAZING !!!!!!!!!! You should do a detailed video of the engine and supercharger setup.
@dekesone1 Жыл бұрын
Very impressive! Running damn near 9s is a major accomplishment
@cae8525 Жыл бұрын
Driver mod in full effect....nasty car, really good driver
@maroonsn958 ай бұрын
Man this guy can drive!!!! Beautiful car and great times!!!!
@01ZO6TT3 ай бұрын
Driver is on point with the shifts! Congrats on a beautiful, well built Z brother.
@davidfernandez9901 Жыл бұрын
Nice vette. ✌️💯thank you for sharing, pretty cool. 🚗💨
@louie2wavy11 ай бұрын
THIS MF CAN SHIFT GOOD SHIT BROO
@SoFLaZ069 ай бұрын
Awesome work, I need to make it over there. Track and combo working well
@kaelanhinz9020 Жыл бұрын
Impressive driving!
@deeolusanya9325 Жыл бұрын
Those are insane ets! Most will not comprehend what you’ve just accomplished on a low profile drag radial. Mid to sub 10sec ets are a challenge in automatic with slicks for most.
@904C5ZOSIX11 ай бұрын
Yo, freaking amazing! Now we all need much more info on your build. Besides the stock tranny and diff. ✌️👍
@JAKEWJONES Жыл бұрын
congrats. I am going to supercharge my '01 Z06 soon. I actually plan to swap in an LSX with a supercharger.
@ryanhansen3344 Жыл бұрын
Keep having fun. Stay safe
@BasinMotorsports Жыл бұрын
You're right there for a 9.99 on a colder night. Keep us updated.
@HandSolo1 Жыл бұрын
Subscribed. I want to see 9’s w the stock rear. Hope you get there.
@straightlinepainting5967 Жыл бұрын
Cool car
@toddpaulus43633 ай бұрын
Congrats! Hey bro what size rear tire you have on?
@nismonx14 ай бұрын
What rims are those? Car looks very nice!
@jhanpgarcia2725 Жыл бұрын
Great job. What's your tire n wheels spec pleases
@jblovell9065 Жыл бұрын
Impressive
@FrankKritzman Жыл бұрын
Yo man, what brake upgrade do you have on that car?
@jhanpgarcia2725 Жыл бұрын
A transmission brace will help with the transmission. Ecs. ✌️
@bgnorthport Жыл бұрын
I have a 2003 Z06 with an A&A T-rim supercharger, I'm making 634 RWHP. Are you launching your car with the traction control off? I have to leave mine off otherwise it goes into limp mode if I get on it, I can keep my traction control on under normal driving conditions. My last question is what's the life of the Nitto tires? My car came with Bridgestones on it and they don't hook at all with my supercharger setup. I'm over in Deltona, FL.
@Texas_Cruiser
Жыл бұрын
Did you end up going with a different tire and if so what size rear?
@SuperChipperson4 ай бұрын
psi tires down a little bit more?
@briangary3042 Жыл бұрын
Time for drag tires and a 2 step.
@markmorefield9996 Жыл бұрын
What psi were you running on the 555 r2s?
@matthewm32510 ай бұрын
I'm sorry did you say stock differential & trans?!? Dang bro that's nice.
@Jimmy-drives
10 ай бұрын
Yes
@toddb3394 Жыл бұрын
Man 1.5 60 is AWESOME in a C5Z w that rim/tire! I have a H/C/I w a RPM 3.90 rear. 305 R888Rs. Any launch advice? Stock clutch.
@toddb3394
Жыл бұрын
Sorry i didn't finish lol 1.41!!!!!!!!!
@sf1of1
Жыл бұрын
get a ls7 clutch
@gotmylk
Жыл бұрын
LS7 clutch is not a good recommendation for a H/CI car that makes decent power with a 3.90 and running a DR or a slick at the track. The LS7 clutch won’t hit and you’ll burn it up quick. Plus the flywheel options with LS7 are heavy AF. I had 8k street miles into one and maybe 50 passes before it took a crap on me. Plenty of guys like myself have made the LS7 mistake and found out the hard way. Never again. If you’re planning to stay NA under 500whp Centerforce makes a great dual friction around $700. Then select your lightweight flywheel of choice for another $400. Over 50k miles on the Centerforce with Fidanza 14lb flywheel- 428rwhp/401rwtq with 100 passes on DRs or a slick. Countless street races and still going with it at 640rwhp/568rwtq but hasn’t been back to the track as I know it’s on borrowed time now. If you plan on ever going FI then McLeod RXT is a solid option. 2 of my buddies run them in their C5 Z06’s both low 9 second cars. Excellent clutch.
@Highlander1432
10 ай бұрын
Monster stage 2 with lighter flywheel and tick adjustable master Should be good for your power level
@toddb3394
10 ай бұрын
@@Highlander1432 Thanks. I actually had an A&A kit installed w a Monster twin disc but stayed w a gm master and standard flywheel. I couldn't be happier. Clutch grabs a little harder but feels like stock pedal.
@TheTrueAdonis1 Жыл бұрын
What Mods???
@michaeldyer6304 Жыл бұрын
👍
@SpeedDem0n8311 ай бұрын
Mod list?
@MS-mr4zm Жыл бұрын
Get an ECS diff/trans brace
@Captain_Insano445 Жыл бұрын
Damn what the heck do you have under the hood to run 10s
@matthewm325
10 ай бұрын
It's actually not super hard to get 10s in a C5 because they're only 3200lbs. Mines 3412 with me in it. Heads/cam/e85 & 200 N20 shot and it's in 10s especially with a drag setup.
@Highlander143210 ай бұрын
Is this one of those guys who trailers his car to the track and keeps it in the garage 99% of it's life never going wot on the street ?
@Jimmy-drives
10 ай бұрын
Absolutely not if you go on my channel I do a ton of street driving. And also lots of pulls WOT on the street!
@Highlander1432
10 ай бұрын
@Jimmy-drives Awesome man I will check it out
@westdeaton4127 Жыл бұрын
That don't sound like a 9 second car LOL
@exoticspeedefy7916
5 ай бұрын
Eh?
@cae8525 Жыл бұрын
And just to add those Dodge products are just heavy slugs....can't stand them. And before I get flamed...my c6z texas speed 441 is undefeated against them so...
Пікірлер: 48
AMAZING !!!!!!!!!! You should do a detailed video of the engine and supercharger setup.
Very impressive! Running damn near 9s is a major accomplishment
Driver mod in full effect....nasty car, really good driver
Man this guy can drive!!!! Beautiful car and great times!!!!
Driver is on point with the shifts! Congrats on a beautiful, well built Z brother.
Nice vette. ✌️💯thank you for sharing, pretty cool. 🚗💨
THIS MF CAN SHIFT GOOD SHIT BROO
Awesome work, I need to make it over there. Track and combo working well
Impressive driving!
Those are insane ets! Most will not comprehend what you’ve just accomplished on a low profile drag radial. Mid to sub 10sec ets are a challenge in automatic with slicks for most.
Yo, freaking amazing! Now we all need much more info on your build. Besides the stock tranny and diff. ✌️👍
congrats. I am going to supercharge my '01 Z06 soon. I actually plan to swap in an LSX with a supercharger.
Keep having fun. Stay safe
You're right there for a 9.99 on a colder night. Keep us updated.
Subscribed. I want to see 9’s w the stock rear. Hope you get there.
Cool car
Congrats! Hey bro what size rear tire you have on?
What rims are those? Car looks very nice!
Great job. What's your tire n wheels spec pleases
Impressive
Yo man, what brake upgrade do you have on that car?
A transmission brace will help with the transmission. Ecs. ✌️
I have a 2003 Z06 with an A&A T-rim supercharger, I'm making 634 RWHP. Are you launching your car with the traction control off? I have to leave mine off otherwise it goes into limp mode if I get on it, I can keep my traction control on under normal driving conditions. My last question is what's the life of the Nitto tires? My car came with Bridgestones on it and they don't hook at all with my supercharger setup. I'm over in Deltona, FL.
@Texas_Cruiser
Жыл бұрын
Did you end up going with a different tire and if so what size rear?
psi tires down a little bit more?
Time for drag tires and a 2 step.
What psi were you running on the 555 r2s?
I'm sorry did you say stock differential & trans?!? Dang bro that's nice.
@Jimmy-drives
10 ай бұрын
Yes
Man 1.5 60 is AWESOME in a C5Z w that rim/tire! I have a H/C/I w a RPM 3.90 rear. 305 R888Rs. Any launch advice? Stock clutch.
@toddb3394
Жыл бұрын
Sorry i didn't finish lol 1.41!!!!!!!!!
@sf1of1
Жыл бұрын
get a ls7 clutch
@gotmylk
Жыл бұрын
LS7 clutch is not a good recommendation for a H/CI car that makes decent power with a 3.90 and running a DR or a slick at the track. The LS7 clutch won’t hit and you’ll burn it up quick. Plus the flywheel options with LS7 are heavy AF. I had 8k street miles into one and maybe 50 passes before it took a crap on me. Plenty of guys like myself have made the LS7 mistake and found out the hard way. Never again. If you’re planning to stay NA under 500whp Centerforce makes a great dual friction around $700. Then select your lightweight flywheel of choice for another $400. Over 50k miles on the Centerforce with Fidanza 14lb flywheel- 428rwhp/401rwtq with 100 passes on DRs or a slick. Countless street races and still going with it at 640rwhp/568rwtq but hasn’t been back to the track as I know it’s on borrowed time now. If you plan on ever going FI then McLeod RXT is a solid option. 2 of my buddies run them in their C5 Z06’s both low 9 second cars. Excellent clutch.
@Highlander1432
10 ай бұрын
Monster stage 2 with lighter flywheel and tick adjustable master Should be good for your power level
@toddb3394
10 ай бұрын
@@Highlander1432 Thanks. I actually had an A&A kit installed w a Monster twin disc but stayed w a gm master and standard flywheel. I couldn't be happier. Clutch grabs a little harder but feels like stock pedal.
What Mods???
👍
Mod list?
Get an ECS diff/trans brace
Damn what the heck do you have under the hood to run 10s
@matthewm325
10 ай бұрын
It's actually not super hard to get 10s in a C5 because they're only 3200lbs. Mines 3412 with me in it. Heads/cam/e85 & 200 N20 shot and it's in 10s especially with a drag setup.
Is this one of those guys who trailers his car to the track and keeps it in the garage 99% of it's life never going wot on the street ?
@Jimmy-drives
10 ай бұрын
Absolutely not if you go on my channel I do a ton of street driving. And also lots of pulls WOT on the street!
@Highlander1432
10 ай бұрын
@Jimmy-drives Awesome man I will check it out
That don't sound like a 9 second car LOL
@exoticspeedefy7916
5 ай бұрын
Eh?
And just to add those Dodge products are just heavy slugs....can't stand them. And before I get flamed...my c6z texas speed 441 is undefeated against them so...