Hi kuya. I also did this and flushed 3 times with coolant just to be sure because the car had 140k miles and I didnt know the history. OMG the color was not only rust, but almost black copper colored! It took 3 flushes to run clear each with 30 minutes of running the car with the heater on. Took half a day but after, I drove the car from LA to Vegas with ease and enjoyed buffets! I asked my mechanic if I should change the thermostat, he said he rarely sees a bad thermostat anymore but best to flush coolant to enjoy many more miles on the car. So far, 10k miles later, the car runs great. Thanks for sharing the video!

@edcardiy

7 ай бұрын

Thanks for the comment, I really do appreciate it. Nice job doing the flush, Proper maintenance is the key to longer lasting engine. More DIY & Mods coming soon, Please LIKE & SUBSCRIBE and SALAMAT!!!👍

Another great Diy, Good job Ed!

@edcardiy

Жыл бұрын

Thank you! Cheers!

I am so doing this. Thanks for video.

@edcardiy

Жыл бұрын

Dan G, Best of luck! more Mods & Diy coming soon, Please LIKE & SUBSCRIBE and Thanks for watching!!!👍

Cool. Just ran into this video. Are u lowered on coil overs or lowering springs?

@edcardiy

Жыл бұрын

H&R lowering springs, 1inch drop all around

Don't you have to drain the coolant first then fill with distilled water and cleaner?

@edcardiy

Жыл бұрын

Just follow the same process as the instruction of liqui moly.

@LostButBroken

8 ай бұрын

Drain, run one with tap water ,drain, run with distilled and cleaner drain, add coolant.

Thanks Ed, I have an ARMADA SUV with total capacity 14.4 litres, so I used 2 bottles of the LM cleaner, I have flushed tousands of times now but can't get rid of the foaming in the outgoing water, is it an issue ? It's time now to recompose the system, I have been on 100% water for a few days already

@edcardiy

Жыл бұрын

Andre Souza, I think the foaming is only the residue of the cleaner, Since you are 100% water, I think now is OK to flush and put fresh 50/50 Coolant & distilled water, You don't want that water to stay long in your engine, It will corrode inside. Hope this helps you. More DIY & Mods coming soon, Please LIKE & SUBSCRIBE and Thanks for watching!!!👍

@andresouza7962

Жыл бұрын

@@edcardiy thanks Ed, I talked to LM and they said that I made a mistake because I ran the cleaner for 3 days and not 30 minutes as recommended; they advised to get rid if the foaming as much as possible but whatever is left won't hurt, I'll start recomposing tomorrow, thanks

@edcardiy

Жыл бұрын

That's nice to know, Thanks for the update!👍

@NoWr2Run

Жыл бұрын

@@andresouza7962 3 days, Ya some stuff you can run in the vehicle & other stuff " not so much ". I was wondering about that also, LOL.

Ok. I see the red springs. Lol.

@edcardiy

Жыл бұрын

Just got new adjustable spring from MSS track set-up springs, That is for this summer Version 2 of M235i.

Some people pour LM on to the radiator, some on the reservoir.. which one is correct..??

@edcardiy

8 ай бұрын

In my opinion it doesn't matter where you pour it, They will be mixed in the system anyway. More DIY & Mods coming soon, Please LIKE & SUBSCRIBE and Thanks for watching!!!👍

Do you run the engine once the distilled water in the reservoir? If so, for how long? How many time you flushed with distilled water? Kabayan😊

@edcardiy

4 ай бұрын

You do not need to run the engine to do the flushing, BMW have electric water pump and it can run independently while engine is off, Just make sure you put a battery charger on your battery, So your battery will not deplete (water pump takes a lot of power). Salamat!!!👍

Does this help with the aircon not heating one side

@edcardiy

Ай бұрын

Probably, I have to look into that. Thanks for watching!!!👍

Brother you were supposed to drain the old coolant first

@edcardiy

8 ай бұрын

Just following the instruction of the Liquimoly radiator cleaner, Maybe if you have extra coolant maybe it's better to do your method (just my opinion). More DIY & Mods coming soon, Please LIKE & SUBSCRIBE and Thanks for watching!!!👍

After putting in flush treatment, I drain it, then run hose water through it while leaving petcock open, engines running. Drain that out, put distilled in run that for a bit, drain that & add antifreeze mix. Oh also change Thermostat out just for the hell of it if it's been in there for years & years.