The new MIC is fantastic

@motocorn

Жыл бұрын

Thanks! I am very very happy about todays results

4:00 - red or orange pin stripe on the wheels similar to the 2018 matte sliver bike came with. Not sure I'd powder coat the entire wheel orange or red.

I recently did a coast ride, was pretty fun going through he forest. 101 got nice views of the coast. I usually ride bald peak; it’s a nice view up there as well. Farmland and whatever’s out that side is nice too.

@motocorn

Жыл бұрын

Id like to spend more time on the 101!

Great Vid mate. Love the bike I’m looking at one myself. Keep going mate its a long road but the channel will get there. What Camera you using is the DJI mic just in the helmet

@motocorn

Жыл бұрын

Thanks! Im using a GoPro Hero 9! and yea, the Mic is just in my helmet :)

I do like the idea of the orange wheels. If I had this grey colour I’d definitely do them.

The bobber is the only class of bike I don't have. Come to Tucson this winter!

Dude you know I love you, come to Tucson and we'll ride like the wind, bbq ribeyes and pool off!

I had roads like yours in NH... Bear Notch road

I like the Bobber too.

Hi Motocorn! Question: I brought the quadlock stem mount too (not pro). Did you have to loosen the handlebar clamps so you can tuck in the stemmount? I cant put it in :( If so, which newtonmeter do i have to tighten the handlebar clamps? Thanks in advanced and love your authentic ride Videos. Keep it up. Greets from Germany. 🙏🏽🙋🏼‍♂️ @Motocorn

@motocorn

Жыл бұрын

Ahh Germany! The place I want to visit the most... Well, I have the Pro mount and I did NOT have to remove the bards at all. I See lots of people saying that even with the pro, they had to do that. But because the middle section on the pro is removable, I was able to snake it in with no problems. Best of luck!

@vapebuddy

Жыл бұрын

@@motocorn Nice Bud thanks for ur fast reply! Dam i will call my Dealer to give me the right Nm :) So happy with my R Model that just arrived today. Lookin forward to your up coming videos and mods. Cheers!

I love the Street Moto2 but i wouldn't have bought a Street Triple with having the 1200RR, but happy I have it now. But that means maybe the bobber in a couple year's. Although my 2012 Tiger Explorer is getting "long in the tooth" now so...

@motocorn

Жыл бұрын

Id like a 1200rr, but i think i would get myself into real big trouble on that thing hahahah. I want something thats like vastly different, like bobber :)

What's your gopro settings?

Orange wheels would make it pop. Maybe some orange stripes in the wheels, a little more subtle like Ducati does. 2nd gear rolls are cool, but first gear rolls in sport will bring the wheel off the ground a few feet... lots of fun. I usually keep it in road mode, the power is the same but the throttle response is softer and the wheelies are only a foot off the ground. Oh, and the mic sounds really good, what settings did you wind up with.

@motocorn

Жыл бұрын

Id like to do the strips, i just cant find the exact orange haha. Soo -12 on the Transmitter and Receiver. Mono audio since im only using one transmitter. Low cut is off currently! On the go pro (not that you use that) i have raw audio and wind off :)

@TriumphLover

Жыл бұрын

Remember, orange is KTM..

@motocorn

Жыл бұрын

@@TriumphLover Ahhh true... damn i didnt think about that haha.

I think the proper phrase Nick was looking for was “Jack of all trades” rather than “one trick pony” lol

@motocorn

Жыл бұрын

I think I did get it wrong and he was saying the bobber is the one trick pony

What license plate is it?

If you used old model's headers for the slipon, wouldn't it be possible to use aftermarket headers from the previous models? If so why'd you get a slip on rather than a full system cause you had to pay for headers regardless

@motocorn

Жыл бұрын

Well, yes aftermarket headers will fit. However, usually when deleting a cat, you'd want a tune. And because those aren't out yet, I wanted to play it safe and I was lucky enough to score a basically brand new set of headers off eBay for under $300. Most headers out there are close to 1k USD. and that's not even including the slip on haha

@altair1337

Жыл бұрын

@@motocorn I see, sorry i'm a new rider so still learning things. About the tune, do you need a personalized tune on the dyno or a tune preset for the bike (if the latter, isn't every bike a bit different and same tune may or may not work..?)

@Nocturtle911

Жыл бұрын

👍 just cheaper for now

Looking forward to the shorty levers 😭 these things are way too big stock

@motocorn

Жыл бұрын

Couldn’t agree more

Dá-lhe Man 😃 Quem disse que meditar é algo que se faz parado? Basta está em cima da minha motoca pilotando e acelerando🏍️😍...Tmj 😃 Deus abençoe todos nós 🙏🏼🧑🏻 Abs 🤝🏽

you should take the orange from the triumph and paint the wheels like the Ducati Wheels on the Ducati Hypermotard 950 RVE... Would be Sick as fuk... maybe you like that idea ;) This is what i want to do to my street rs in yellow ;) But i dont now if i get the same yellow.... :o

Would you sell me your clutch lever if you're replacing it? I have a street triple R that I'm thinking of replacing the clutch lever

You'll be 145lbs soon. The. Watch out!

@TriumphLover

Жыл бұрын

Then watch out...

@TriumphLover

Жыл бұрын

I'll host you so don't worry about acomididations!

Less time talking, more time wot!