Dustin's the goat lmao everytime you say something you need or gotta grab he comes into frame and throws it on the table😂

So Debbie cooks you're dinner AND you're subs, wata gal! Can't go wrong with those Weller soldering guns, have been using them since the 60's! Great video!

We watch your videos no matter what, Jerry. It is you that entertain us, so just have fun with whatever content. Thanks for the demonstration of a recone. Not your first video on this content, but each time us bassheads see a recone video we are reminded of the key steps not to forget.

Jerry the best video/ build idea for you. is some sdrs in debs vehicle.(or any) Sdrs are (relatively) cheap. Views won’t be a problem, every entry level bass head and future entry level bass head wants a sdr review. That video will end up possibly being most viewed for you. At a small cost.

DEB HAS A VERY NICE WATCH WOOOOO

I love Deb frfr, I wish I could find me a Basshead lady like yours💙

We have fri night bass night at the welcome to Las Vegas sign.

I seen a post from a guy that used a thermal gun at one of the shows and noticed a lot of builds there running multiple alternators actually only had one working. You could see a huge difference in the thermal signature of a working vs dead alternator.

Recipe cards work better than paper imo, its thickness is more true than paper. But reconning is definitely something that more Bassheads should be learning how to do proper instead of blowing and buying brand new each time.

@JerryAintloud

10 ай бұрын

I prefer paper because of how thin it is, I can fine tune it better

@ChaosTherapy719

10 ай бұрын

@@JerryAintloud the homie that taught me straight up told me that he's had recone failure with the paper method. And none of the recipe card aligned build failed and hold true. look up Anthony Vigil from Pueblo Colorado mang he's in his 20s and has us both beat in recone and sub building experience

@ChaosTherapy719

10 ай бұрын

Also he won Thumping Pumpkin USACi last fall 169db from a pumpkin and a sub screwed to it from a sub he threw together with only spare parts

@666nacirema666

10 ай бұрын

I use plastic shim stock. Works great and you can be very very exact because there are so many different thicknesses available. Also got a few sets of the jigs they use at the factories then 3d print some on occasion too but usually only do that with shifted motors. Paper is totally fine though.

Nice

Loving the video I am gonna have to show you an easier way to prep for drop in ❤

Awesome content

Thermal cameras make spotting bad alternators easy

Just wanna point something out for anyone soldering a subwoofer in the future. I would put something between the leads and the surround because there is a chance that hot solder can roll off onto tye surround and it will melt right through the surround. I just know this from other times I've soldered things

On Dc clamp meters i suggest with peak hold instead of trying to see the highest numbers it holds it

I don't do spl shows but I can tell you from experience you will know when a coil is going out you will smell it first and if it doesn't smell it will rub i always take my hand and put it on the dustcaps if they are hot I will play it lower so it can cool down this is another reason why I have 9 different subwoofers and amplifiers sitting in my garage its depressing when a subwoofer blows are amplifier goes out?Far as alternators it is what it is if you are a daily driver like me and you don't abuse your subwoofers they will last at least 5 to 7 years but in your case maybe a year or two

Keep us updated on putting this back in and setting the gains please

@yourmotherstepson7974

10 ай бұрын

Use your ear if you don’t have the funds for the correct tools. You should be able to tell if your gains are set to high or low

👍👍👍...

Enjoy your videos Mr Jerry

Glad your getting her truck back together, but from now on Dustin is known as the boogeyman. 😂😂😂 because of his truck.

@JerryAintloud

10 ай бұрын

Boogeyman

I wired up 4 8 inch skar svr's too a skar rp.1500 @0.02 ohm lol it worked and played but was a popping through the subwoofers so I checked the ohm load at that point and had to change it too 2 ohm ): i need a bigger amp too. I built a custom box turned too 30hz it sounds really good. More people think i have 2 15s lol

Nice work

I can already tell it was a auto tek alt that went out.

@JerryAintloud

10 ай бұрын

You might be surprised

I think sam at autotech woulda made it right. Hes always done well to me and everyone i know that has one🤷‍♂️

Great job. you should try this glue, alot of bassheads are switching to this.Bob Smith Industries IC-2000 Rubber-Toughened 1oz CA Adhesive Glue. 5 star rated

@JerryAintloud

10 ай бұрын

I've used that glue before. it worked but I prefer starbond

Had a question from your experience with DC clamp meters to do your alternators put out rated power hot or on average what amperage output do they put out hot at idle say .5-.7v down?

@JerryAintloud

10 ай бұрын

It’s all gonna vary,if you’re not pulling a load it’s not gonna show much output, and when hot they’ll drop around 20% of output

How do you test an alternator?😊

I went to the hardware store and asked them for the grinding/sanding wheel Debbi used with that drill to remove the glue. I even showed them the video. They were no help. Can you tell me what she used?!

That sub looks beefy as hell to be honest

Have you ever used Auto Tech alternators? I'm looking to get a new HO Alt to replace my Ebay special alt I'm currently running. I'm asking about Auto Tech because they've got the lowest prices on the market but sometimes lowest isn't the best. So I'd appreciate your opinion or anyone's opinion really. Thanks!

How much would you charge to recone a 15 inch avatar svl and I already have the recone for it

What type of solder do you use?

@JerryAintloud

10 ай бұрын

Just cheap electrical solder

When subs blow…what’s chances on amp blowing?

@codycrabtree3684

10 ай бұрын

It depends on the amp and how good the protect system is on it

@FinsleysCustomCarAudio

10 ай бұрын

@@codycrabtree3684 Taramps Bass 20k

@JerryAintloud

10 ай бұрын

i've seen it happen, but these DS18 amps protect quick

@brian_zx6r

10 ай бұрын

My taramps amp protected fast when I blow a sub, & came outta protection once I disconnected that blown sub

What synergy subs does Deb run?

@kryptonspl3158

10 ай бұрын

WFO 2krms

Why didnt u just cut out the cone right at the dust cap then u got all the space in the world to cut out the spider

what ever happend to the DB drive g7's did i miss something all i remember i thought you going to do something the car got traded in or something

@JerryAintloud

10 ай бұрын

when weather cools down a bit they will be getting a enclosure and put in the Rogue

What a shame you blew right past the glue down process for both the cone and spider as well as the shim process. That’s the reason I came here.

those after market ALTs are soo unreliable