When you have scorching from the heat press, doing sublimation, you can lightly spray the scorched area with hydrogen peroxide and it should take the brown marks away.

@AngieHolden

2 жыл бұрын

Yes I do that in other videos however I am looking for a coating that does not require those steps.

@Schmeela

5 күн бұрын

did that work?​@@AngieHolden

The PolyCoats are really for specific projects and takes a lot more time. It is worth sticking to professional sublimation blanks. Did want to mention - tape upper parts of mugs where mouths will be if someone will be drinking from the mug. Also, use a very fine sand paper over the mug after the coating has dried and this will make it smooth. I’ve also seen pros lightly sand mugs before putting on the poly coating as they say it helps. For shirts, if you wet the edges (with water before pressing) where you sprayed the poly , but are not sublimating it helps to not get the darkened area. You can also lightly spray brown areas with peroxide/water right after, leave for a bit, and then rinse. Love your channel! Thanks for keeping us inspired!

Angie, thank you SO MUCH for testing these products for us. You save us SO MUCH: money, time and disappointment! You are awesome!!

@AngieHolden

3 жыл бұрын

Happy to help!

This IS ONE OF THE FEW INSTRUCTIONAL VIDEOS, I WATCH IN ITS ENTIRETY. Great presentation and honesty in your video. Good luck, look forward to more videos.

OMG! Hope I don’t seem like too much of a geek but I’m so stoked over the past few videos that you’ve posted! It’s all the sublimation information that I’ve been looking for. Thanks 😊!

@AngieHolden

3 жыл бұрын

Wow, thank you!

@MrsMonzel

2 жыл бұрын

🤣 same! Seems like I been up for 48 hours watching her!!!

On the sublimation spray for fabrics, I used it on 100% cotton towels & washed them with just baking soda in the washer & tumble dried like normal and it came off no issues. I used the same product as well as a different company's spray which is similar.

Angie, you are so awesome to test this stuff out for us. Thank you, thank you, thank you!! I'm bummed that it didn't work out but you saved me a fortune in investing in these myself.

I’m glad I found this channel, I don’t think this will be something I will be doing any time soon. Thank you for sharing.

@AngieHolden

3 жыл бұрын

You are so welcome!

Love your very informative videos! Appreciate all the work you put into testing the various products. Thank you!

@AngieHolden

2 жыл бұрын

You are so welcome!

Thank you for this! I've wanted to try coating my own mugs, now I'm glad I didn't waste my money.

@HVACRTECH-83

Жыл бұрын

There's other products like subliglaze that work great

Thank you for saving us all the time and frustration! You are the best!!

Just Love your honest opinion and for doing the tests for us, That why we are subscribers.

Great video and very informative! Thank you for doing these tests as I was wondering...now I know!💕

@AngieHolden

3 жыл бұрын

You are so welcome!

Thank you for this video. I was wondering how these products would work. You definitely answered my question. I truly appreciate your videos. Thanks for being you.

@AngieHolden

2 жыл бұрын

You are so welcome!

Wow! I was about to try some of this stuff... So glad I came to check with you first!! 🧐

Great information and it saves us from product disappointments! Thank you!

@AngieHolden

3 жыл бұрын

Thanks for watching!

thank you so much for experimenting with these products, I was looking into trying this coating process but I will continue to use my sublimation blank mugs. Thanks!!! 😀

@AngieHolden

2 жыл бұрын

You are so welcome!

Btw I love all your videos... thank you for testing things for us, because you've saved me so much money from being wasted

@AngieHolden

3 жыл бұрын

You are so welcome!

Excellent video. You probably saved a lot of people some money buying disappointing products. You rock as always.

@AngieHolden

Жыл бұрын

Thank you! Cheers!

TACK Angie, du är så bra på att förklara i dina videoklipp.

As soon as you started Mixing... I just decided to bite the bullet and BUY SUBLIMATION MUGS... Especially as a business... With that warning about not applying where body contacted would be... Dont need lawsuits. Thanks for this info... always looking for easier, faster and CHEAPER... Thanks again...BEST VIDEOS EVER!!

@AngieHolden

2 жыл бұрын

I definitely agree!

thanks for this video!!! it was soo good to know this!

@AngieHolden

2 жыл бұрын

Glad it was helpful!

Great video. Thank you for testing these products

@AngieHolden

2 жыл бұрын

Thanks for watching!

Angie, thanks for the instructional video. I purchased the Ngoodiez sub coating for mugs. It did not come with instructions. I found your video thinking it would tell me how to use it. However, what it did shows me is that this is a product I really don't want to even fool with at all. So, it's going back to Amazon and I will purchase mugs already set up for sublimation. Thanks for passing on your expertise.

@AngieHolden

2 жыл бұрын

Glad it was helpful!

Thank you for this video. I have been wondering if this would work. Now I know!

@AngieHolden

3 жыл бұрын

Definitely haven't found something that will work yet!

This video was timed to perfection lol. I had been looking at sublimation sprays but have definitely got some food for thought now.

@AngieHolden

Жыл бұрын

Great to hear!

@fatisummer9106

Жыл бұрын

you should try sublimation spray for your self at least cotton clothes ,but not like she did ,she did it the wrong way,dont put so much,one spray for one spot no more than that then wear your gloves and spread it even,lastly let it dry ,also choose a good brand ,I been use sprays for so long never had a problem

Thanks, Angie well done, well presented.

@AngieHolden

2 жыл бұрын

Glad it was helpful!

Wow, thanks for saving me money on these products!

Thank you for doing this video! I am learning a lot. What is the difference between sublimation and silk screen on fabric? Which is better?

@AngieHolden

3 жыл бұрын

Silk screen is where you use ink to paint the fabric. You can see how here: kzread.info/dash/bejne/pauJw5RvZJufhdI.html and sublimation is where there is a reaction and the ink is embedded into the fibers of the shirt for instance. Here is a basics on it: kzread.info/dash/bejne/fKanqcx8ht2biaQ.html

sooooo helpful. thank you.. I love your videos

@AngieHolden

3 жыл бұрын

Glad you like them!

Angie, once again another terrific video!!! Question on the WRMK mug wrap. Did you like using that? I find that fascinating!!! Do any of your previous videos show how to use that from start to finish (oven temp, time in oven, etc). I've never seen that wrap before. Thanks!

@AngieHolden

3 жыл бұрын

I am going to do a video with it I think here in a few weeks and see how it does with consistency.

@dianecurtis3823

3 жыл бұрын

@@AngieHolden on that note, I just purchased the WRMK kit on HSN. But now afraid to use it because everyone said it smells horrible when placed in the oven. Did you experience the smell? using a sublimation mug blank.

Very helpful. I've tried another brand of poly spray for cotton and it was pretty good--but not 100%. So I'm not a fan of polyester shirts. Do you have a recommendation for poly shirts that are thicker and feel/look more like cotton? THanks.

@AngieHolden

3 жыл бұрын

Yes! Gildan makes a poly shirt and Artesprix has a good one. I have some recommendations in this video: kzread.info/dash/bejne/fWeOq9qod92fotI.html

Hello, when I apply the sublimation liquid to a ceramic mug, does it become ready for printing? I put it on my freesub heat transfer machine and of course the picture will be with tape, is that enough?

Great comparison. Don't like any of the diy sublimation coatings. Will stick with the original sublimation products. Thank you Angie. 💐💐💐

@AngieHolden

3 жыл бұрын

Thanks for watching!

Thanks so much for this info.

@AngieHolden

3 жыл бұрын

You are so welcome!

Thank you Angie for this video, thank you for your honesty!!!! Great helpful video thank you for sharing!!! Hugs Liz x

@AngieHolden

2 жыл бұрын

You are so welcome!

@elizabethvallely4044

2 жыл бұрын

@@AngieHolden 💕

is is possible to use the spray sublimation coating on a tumbler?

Thank you for this video.

Did the yellowing on the shirt wash away?

Very useful,thank you

@AngieHolden

2 жыл бұрын

You are welcome!

Thank you for sharing this. I was hoping to coat my own, won't bother

Thank you for the info!!! It's so helpful to watch your results before diving in blind. Have you tried polygloss?

@AngieHolden

2 жыл бұрын

Not yet!

Hi Angie. Thanks for the videos. What is the best sublimation printer in your opinion?

@AngieHolden

3 жыл бұрын

I have only used the one and it is one I converted. kzread.info/dash/bejne/X5po0aprqJC0pZM.html

How to print on the bottom of the mug ( External ) through sublimatiom

thank you for saving me money. I love your channel.

@AngieHolden

3 жыл бұрын

Happy to help!

Hi can I know what is the name of it and can I get it in india

I know the shirt will I do tons. But I wanna learn if we can do it on tumblers and glass wine

@AngieHolden

3 жыл бұрын

You can do sublimation on any sublimation blank and there are a ton of tumblers and wine glasses on the market for that. I have not found a coating that I am happy with to apply to these products, however.

Wow! Thank you for doing this video. I'll stick to the sublimation mugs.

@AngieHolden

3 жыл бұрын

Me too actually! HA!

Whew~! Thank you! You just saved me a lot of time and hassle!

@AngieHolden

2 жыл бұрын

Glad I could help!

Which chemical need mixed tell me please 🙏🙏🙏

Just found this channel and love it. New subscriber

@AngieHolden

3 жыл бұрын

Welcome aboard!

Thanks for doing this video! I would love to know what happens when you wash that t-shirt. How much do the colors fade when washed and will the brown color leave?

@AngieHolden

3 жыл бұрын

I didn't test that as I wasn't happy with the outcome in this case. I am trying to test some more products to get some better options.

@gigles0927

3 жыл бұрын

You should run it through a wash to see what happens. I just found your channel and am subscribing today...I do hope you do the wash and give us a update. Thank you much for this video as I also was wondering about those sublimation products. So glad I found this and did not waste my money...

Would you mind doing something like this for clear glass? I'm most interested in wine bottles. I make wine at home and would love to just sublimate the labels so I don't have to replace the labels every time I reuse the bottle.

@AngieHolden

2 жыл бұрын

I haven't found a coating I like yet but if I do I will try it on clear glass!

Excellent info, tfs

@AngieHolden

3 жыл бұрын

Thanks for watching!

Can you try that coating in the mugpress?

Hello I wanted to know if I can use sublimation paper with my hp jet 5505 printer and then use sublimation blanks I really don’t want to buy another printer but I would like to try this if you can help me do this on your video. thank you love your videos.

@AngieHolden

2 жыл бұрын

You also have to have sublimation ink. Try this: kzread.info/dash/bejne/fo2ektiMac-1mNY.html

@nekonette

2 жыл бұрын

Your HP printer won't be compatible with sublimation ink. You will need either an actual sublimation printer or convert an Epson inkjet printer (don't use the inkjet inks that come with the printer). HP/Canon don't work with sublimation inks unfortunately.

I used the same spray on a shirt and once I washed it, the yellow went away and it worked great for my cotton shirt.

@Schmeela

5 күн бұрын

Good to know. Thx.

Thanks for your videos. I've seen other videos that talk about the yellowing being gone after washing. Let us know when you wash that shirt. Also, I read in the comments about someone having success with Poly T Plus and Gloss for shirts and mugs. Will check in again to see if you try those. I looked for that product at Hobby Lobby and didn't see it. (Poly T Plus.). Thanks again! Excellent videos.

@AngieHolden

3 жыл бұрын

I am going to try a few more but I still don't like it yellowing after I press!

@candyluv6972

Жыл бұрын

@@AngieHolden have you tried anymore yet like Polygloss from Dyepress?

Your'e The Best, Thank You for doing this :)

@AngieHolden

2 жыл бұрын

No problem 😊

I am interested for purchasing for this item, how can purchase it

You do the greatest videos that save us all so much time and money! This may sound weird, but I am glad it wasn't a success because i dont want to be tempted to buy even more stuff. For me, having a dedicated oven for the ceramics is a non-starter. I just don't have tons of room for that type of thing. So I likely will never do mugs at all. But for fabrics I'll stick with polyester shirts

@AngieHolden

3 жыл бұрын

I was hoping for at least ONE partial success!

@gigles0927

3 жыл бұрын

I also was hoping for one to be a success as there are so many cute inexpensive items we would be able to sublimate if it would have worked. Maybe in the near future there will be a company that will come out with a quality product seeing as a demand for one is on the rise!!

Love the test and the information. Will be trying more of them? I know people seem to like Dyepress poly T plus for fabric and Dyepress polygloss. I even heard people using polycrylic not only on hard surfaces but mix it to use on fabric. Have you heard of it or tried it? Thanks for the video!

@AngieHolden

3 жыл бұрын

Definitely will try more in another video. I thought I would put this up and get some suggestions!

@katieb3358

3 жыл бұрын

I bought some dyepress poly T, it's still in the box...scared to try it. They sent a free small sample of gloss with my order. I also ordered their matte for wood, that's really what I want to try. But still...all of it is still in the box with FEAR written all over it, which is kind of surprising, I'm usually willing to jump right in LOL.

@mkayweber3739

3 жыл бұрын

@@katieb3358 I want to try it too

Instructions do say if you oversaturate the shirt, for the spray on fabric, it will turn yellow. Will be trying on a cotton sweater. Gonna give it a go.

Im also wondering if the sublimation coating would go on coloured mugs like black, red etc..

@pepamonrabal2787

3 жыл бұрын

👍

Wondering if you've ever used Polygloss coating brand sublimation coating and if so how does it work compared to the brand you used in this video?

@AngieHolden

2 жыл бұрын

I have not. I do want to test some more brands, however.

Thank you

Angie hi, regarding the fabric poly spray, was wondering if you have tried this technique using your heat press instead of the Cricut press. I've seen a KZread video showing no yellowing on a 100% cotton sweat shirt using a regular heat press. I've tried using my Cricut heat press several times with a poly spray and no matter what temp I use, there's yellowing (like it burns the t-shirt). So I'm wondering if maybe the result would be more favorable using a regular heat press.

@AngieHolden

3 жыл бұрын

OH maybe. I have on my calendar to try some more brands of this.

Thank you! Made my life so much better! I was debating on getting those exact stuff! I will pass on it. And just spend the extra money on the sublimation products

@AngieHolden

2 жыл бұрын

Glad I could help!

@deshantebraggs332

2 жыл бұрын

@@AngieHolden so im confused now... so you don't need any solution for 100% cotton???

Thank you Angie- you saved me some money and I appreciate it. I think for now, I will stay away from trying these products. I could clearly see the difference. I was , however- surprised that the cotton took the ink ( the un-sublimated side) fairly well. I thought it wouldn't print at all

@thatguyfromca

2 жыл бұрын

cotton will take the ink, but will wash out when you wash it.

Interesting video. The WRMK wrap seemed to work well with the sublimation blank. I recently bought the set at a greatly reduced price so if everything works except the coating, I'm OK with that. I'm hoping the wraps will work on tumblers also.

@AngieHolden

2 жыл бұрын

I actually didn't like the wraps as they stretched and did not last very long.

Can you try the fuze on cotton????! Would love to see that one.

Great info

@AngieHolden

3 жыл бұрын

Glad you think so!

I saw where someone showed you can spray peroxide over it and it will remove the yellowing. Haven't tried it.

@AngieHolden

3 жыл бұрын

I have had some people suggest that but it doesn't seem like the best solution to me.

how much rate for this item

the spray for the t-shirt was very yellow. Im wondering though, how bright was the design on the 100% cotton shirt? Would it have been brighter on a polyester or blend?

@AngieHolden

2 жыл бұрын

Not sure. I wasn't happy with the results regardless.

I've used Slansval brand with great success on wood, leather & stainless.

Hi Ms. Angie I am getting into sublimation and having a very hard time. I downloaded the ICC Drivers for my ET-2720 have the hipoo ink. However, when I use my polyester item the image does not transfer to the material. I have a Vevor 8 in 1 heat press. Can you please help me figure out what I am doing wrong? Please!!!

@AngieHolden

2 жыл бұрын

First make sure your ink bottles say sublimation ink. There is regular Hiipoo inkjet ink as well.

what kind oven you use?? and they temperature?? thank you .good thing l Didnt wasted money on plain mugs

@AngieHolden

2 жыл бұрын

Time and temperature should be indicated on the packaging of the brand you purchase. You can use a regular oven or a counter top oven.

What about stainless steel water jug. No yellowing would happen ?

@AngieHolden

2 жыл бұрын

I am not sure.

could you use an mug press or plate press

@AngieHolden

2 жыл бұрын

Yes you can.

What do you use to clean your brushes after to prevent it from hardening

@AngieHolden

9 ай бұрын

For things like this, I generally use a disposable brush.

Not sure about these, but the Subli-T spray is amazing and works wonders. Also, the little bit of yellowing can be fixed by a quick spray of peroxide. You can sublimate in cotton and it will look great until you wash it. Because the ink has nothing to bond with, it will wash out. Otherwise, the spray I use works great, those cheap brands are terrible.

@dianesloey8265

2 жыл бұрын

I think she sprayed too much on the shirt because I spray with homemade Poly t and I have great results and sell them at my daughter's pro shop with no yellowing

@Schmeela

5 күн бұрын

​@@dianesloey8265is that with polycrylic by chance? Do you have a recipe? Lol

Angie have you tried the Poly T Pro from dyepress on shirts?

@AngieHolden

2 жыл бұрын

The only ones I have really tried are in this video. I want to do more experiments but haven't yet!

I saw the WRMK kit on HSN and when I asked about the transfer coating, I was told that it was only for use on cotton fabric, and not on hard surfaces like mugs. Do the written instructions say something different? I wasn’t convinced that the coating would be any good, but I ordered the kit anyway because I wanted to try the transfer pens and the price was right! Thank you for an excellent video!

@AngieHolden

3 жыл бұрын

That is the kit I am using! It came with a mug to put the coating on and directions to do so?

@craftpaintcreate2328

3 жыл бұрын

@@AngieHolden Wow! That's not what they told me! I was told that the mug in the kit is already a sublimation blank, so there was no need to put any coating on it, and that the coating in the little bottle is only for cotton fabric items. I ordered 3 of the kits because they were on such a great sale, so I'll try pressing one of the mugs without adding any of the coating, and I'll let you know what happens. I hate it when there are conflicting instructions!!! I mainly ordered the kits for the transfer pens and because I wanted to try the coating stuff on a cotton tote to see if it would work. I was also curious about the silicone wraps. I already have a regular mug press, but if the wraps are easy to use, they would be more convenient than having to drag out the press every time I want to make a few mugs!

@AngieHolden

3 жыл бұрын

I bought mine a LONG time ago. Wondering if they had failures and changed the kit. That makes me angry!

Nice video. After putting a image or test on a mug, is it dishwasher safe.

@AngieHolden

2 жыл бұрын

I am not sure with these products as I haven't tested them.

can you use this coating on metal? And do you have a video from beginning to end making a bone dog tag?

@AngieHolden

3 жыл бұрын

I am not sure if you can use on metal. Please make sure you watch the entire video as I didn't like any of these products. And I don't have a dog tag video.

In regards to the T-shirt since it scorched the cotton, have you tried doing it on a lighter heat setting instead of what the recommended setting was? Was it still scorched if you did?

@AngieHolden

2 жыл бұрын

I haven't tried that.

Hi, i am just wondering can it be cured in a mug press instead of the oven? Or maybe used in the heat press after being cured in the over?

@AngieHolden

2 жыл бұрын

I don't think it could be cured in a mug press. I am hoping to test some more coatings soon.

Like to see wash test on the shirt, and the mug wrap.

@AngieHolden

3 жыл бұрын

I will be doing more tests with products made with the mug wrap in the oven so stay tuned. I will be testing some more coatings and options for shirts and when I find out that I like, I will do wash tests!

I can't find links to the cotton spray or cups stuff.?

@AngieHolden

Жыл бұрын

Links are always in the description below the video. Click show more if you are on computer. On mobile, swipe up on the video or click the arrow to expand the description depending on how you are watching.

I messed up on a few stainless steel tumblers and when I removed the ink it removed all the white coating. Can I use these on stainless steel tumbler to subliminate after?

@AngieHolden

2 жыл бұрын

You can definitely try it.

Can you use the mug machine to let the liquid sublimate instead of a separate oven?

@AngieHolden

3 жыл бұрын

That is not what it says on the instructions.

Thanks for saving us some time and money....

@AngieHolden

3 жыл бұрын

Happy to help

I wish I would’ve seen this video earlier lol. I just bought the spray for fabrics

How do I know if a blank is for sublimation? I bought a tumbler at Michaels that looks like a sublimation but I don’t know if it is. Do you know how to identify a sublimation blank?

@AngieHolden

3 жыл бұрын

It will say right on the product if it is or not. Tumblers from Michaels will NOT be for sublimation.

Which sublimation mug did you use? I didn't see it in the links.

@AngieHolden

3 жыл бұрын

Oh I didn't link it. It was a listing on Amazon!

Have you tried the one that is in a spray can..

@AngieHolden

2 жыл бұрын

No I haven't!

did the yellow fade on the fabric after washing?

@AngieHolden

2 жыл бұрын

I did not wash it as I was not happy with the results.

Angie I am wanting to know if you can sublimate the bottom of a tumbler. I would like to put my logo on the bottom of my tumblers. Is there a way to do this?

@AngieHolden

3 жыл бұрын

I have seen people try and not have a ton of success.

@eagleeyeprintingdesigning5443

3 жыл бұрын

WHY NOT TRY PUTTING YOUR LOGO ON WITH VINYL ON THE BOTTOM OF THE MUG.

Can you use the sublimation spray you put on the cotton shirt on a cup

@AngieHolden

5 ай бұрын

I think it was also for hard surfaces. Or supposed to be for them.

@rosemarywilliams5136

5 ай бұрын

Can you try a video to check see it it works on cups or glasses please