the skid steer is about the most versatile machine ever invented. I have had a number of brands through the years working in school districts, all worked great. The attachments available are endless and we made some speciality ones as well. Yours looked like it done an excellent job to me, will make a fine garden spot for the home owner

That job turned out nice, Team V-Belt does it again, glad you had that attachment. 👍👍👍🇺🇸

Great video, Sam. Thanks for sharing.

Nice equipment, getting job done 👍

Great work as always 😎👌

The machine at 11:30 reminded me of Speed Racer for some reason. I'd paint it red with a number on each side so it looked like a race car. I rented a stump grinder for 4 hours and got 2 stumps done. I took it back and they asked "How did it go?" I said "beautiful, I cut down two 30 yr old pine tree's that I hated". He said "You used this on pine tree's?" I said yes. He said "Didn't it bounce all over the place?". I said "No I made small passes to the left and right and watched a youtube video on how to do it. So, I did both stumps for $200 rental for 4 hours. I got estimates for almost $1k to do both stumps.

Nice work 👍🏽

Nice video! Awesome helmet btw! Looks tactical!👍

Very clean job! I like those stump grinders.....👌🏻💪🏻

Nice work.

I have one of these Stumpers. You're supposed to start on the left and move right. It grinds on the upstroke instead of the down stroke. Way less vibration.

Back to the grind. Lol. Great job as always

Nearly 110 passes on the first stump. Looks like a good attachment

That 12 does a good job

By the way fantastic video today excellent commentary,, just a suggestion on stump grinding you might be I had to have someone with a backpack blower moving the chips out of your sight to help you do a more efficient job of grinding the stump,,, I do it myself and it helps immensely gives you a better view

Re the pile up of chips Being a bit allergic to hard work and rakes, when the chip piles up I back my machine up a bit then sweep the cutting wheel side to side through the pile up to spread it to each side then back forward to the stump and continue.

That rayco is a helluva lot faster than my 13 horse Vermeer 😂

That yellow grinder moves a lot faster in the summer! Dang ol son

@jayg479

4 жыл бұрын

Hydraulic movement not driving lol

@VBELTandSON

4 жыл бұрын

it doesn't move fast anytime haha naw its a goofy system it runs hot and cools engine with hydraulic oil. so its warm

It was the wind that knocked the stump grinder out of alignment with the trailer..... Lol 😜

Those machines are awesome, just because of the functionality. Want to scoop something.. got you covered. Want to grind something... Got you covered. Want to make some toast.... Prolly got you covered haha

@Fenrirsleash

4 жыл бұрын

That dedicated machine will eat though.

More truck videos please!

" Life ain't easy anymore and everything ain't for everybody " #SACRIFICE #V-BELTandSON

Small world. I was at that property right off 174 in July of 2019. I did a chicken coop demo and hauled off a bunch of trash, construction waste and scrap metal that they wanted gone before the loggers came. Guess you were the logger.

If only the rayco moved spot to spot faster!

Someday I'll video our stump x....maybe next week.,..it narly

How's that vgt holding up? I'm about ready to burn my truck down I'm on 3 actuators and 2 scan tools still can't get it to pre align

@VBELTandSON

4 жыл бұрын

its been working great! loads of effort but its back to working good.

Would you just not want to use the mulcher to mulch the stump flush to the ground?

@VBELTandSON

4 жыл бұрын

Tristan Radeboldt not very quick or efficient without knives on the mulcher head. Green pine stumps are tough to grind. Stump grinder is faster than the mulcher head especially on the 3+ foot stumps

Sam any recommended big ass Cummins decals? Lol

Stump grinders are for people who can't or won't blow stumps up.

Where’s the new trailer?!?! Did I miss that video??

@VBELTandSON

4 жыл бұрын

Mitch Himes new trailer is home. Video will be released shortly

How many hours is on the tl12 now

@VBELTandSON

4 жыл бұрын

Devin Burke 160ish

As always an amazing job. Just curious though. Would it have been any better to use the forestry mulcher on the stumps ? Or is that just to big of stumps ? Just curious.

@VBELTandSON

4 жыл бұрын

Warrior Of The King if we had knives on the mulcher but slow with carbides. This grinder was pretty fast. Faster than I thought it would be

@guntherflume7129

4 жыл бұрын

V-BELT and SON I put that 280 on 161 and now on 2 , kx057 really shines on excavator good visibility and very mobile, use a Fecon (rebranded Miller ) on a svl90

Like #91 👍🏻

Can the skid steer 280 unit cut on a reverse stroke?

@VBELTandSON

4 жыл бұрын

Alan L. Simmons not designed for it

@williamuskoski1385

4 жыл бұрын

Dont have teeth on the back side of the disk

@VBELTandSON

4 жыл бұрын

William Uskoski has the nuts that hold the forward facing teeth in

5:30 I've never seen Rayco teeth like that. That looks more like New River, but it's not that either.

@VBELTandSON

4 жыл бұрын

🤷🏼‍♂️

Why didn’t you cut them lower with the primetech?

@VBELTandSON

4 жыл бұрын

copperworks to slow without knives. Couldn’t find knife holders for it. Funny I filmed a bit talked about that but deleted it. Lol

@copperworks

4 жыл бұрын

V-BELT and SON just like you I always look at how much time it takes to do everything.

You should check out the Industral stump grinder that Bobcat brand makes its awesome

Make sure you have sharp teeth !

It does suck grinding when its dry out. Always womps driving home tasting dirt or ssnd in your teeth

@hihaveaniceday9386

4 жыл бұрын

Lol that's why I bought a enclosed I've try grinding with the door open once never again

First 4th...🤷🏻‍♂️

First 5th🙀

YOU SHOULD TRY A STUMP AUGER

@VBELTandSON

4 жыл бұрын

CANNON BUILDER haven’t any good reviews on it. Talked stump x?

@BuilderCannon

4 жыл бұрын

@@VBELTandSON i dont know if they are any good. The concept is solid. Maybe with your youtube a company might send you one to review. Then we would all know

@VBELTandSON

4 жыл бұрын

CANNON BUILDER I know a guy that owns one. I’ll try and get a video of his in action

@briangardiner1015

4 жыл бұрын

@@VBELTandSON Is that the one Fecon makes?

3rd

First

So stupid. Why would you use something so small and slow when ya have a mulcher head. So pointless to waist time with something stupid and small when ya can blast it out much faster with the mulcher head. Lame

@VBELTandSON

2 жыл бұрын

Let me educate you smart guy. A mulcher head only grinds flat with the ground. This is faster and actually grinds under the dirt level and deletes the whole stump. Try again guy

@jeromyw385xp

2 жыл бұрын

@@VBELTandSON well I've seen what mulchers can do if ya got the right setup you can tare threw stumps real easy there's no resion to go more then 1"-2" below the ground. Pointless. Throw some dirt and seed down and your ready for new grass.

@VBELTandSON

2 жыл бұрын

@@jeromyw385xp 🤦🏼‍♂️ un less you put a horse foundation there or a drive way like they did on this property. Come on kid get real

@jeromyw385xp

2 жыл бұрын

OK if they were going to do all that then why waist time grinding them. Should of just been smarter to remove the stump and be done with it at that point.

@VBELTandSON

2 жыл бұрын

@@jeromyw385xp do you have any idea what it takes to remove a 3ft+ pine stump? X15? They are a huge pain to pull and then costly to dump. The stump grinder is the cheapest and quickest way to delete a stump. Left with simple wood chips you are making me laugh at this point