Thanks for this video! This happened to my Dad on our farm when I was 15. I vaguely remember him sticking the handle of a large adjustable wrench down thru the fill cap and fixing it. That was 58 years ago. I still own that tractor and use it on my 5 acres to clear brush, clean up downed trees, move snow and mow paths thru our prairie. I've always hoped this wouldn't happen to me, wondering if I'd remember how to fix it. Yesterday, it did. I even still own the adjustable wrench from my Dad. I couldn't quite get it though. I bought a $15 pry bar just like your video and it fixed it in one easy nudge to the left. Thanks very much for making a great video. I especially appreciate getting the lighting right on the gears so you can see what goes on!

Thank you! Good video. I thought that was where I needed to start, mine is stuck in 1st. You saved me some time in research. Have a good day sir.

Good insight on a somewhat common problem.

Thank you for posting this. My dad jammed mine up yesterday and was kind of concerned. I figured it would be a simple fix. You verified my thought.

@Mr_Tims

Жыл бұрын

Glad it helped! Take care of that 35. It will last forever!

Saved my butt with this video, thank you!

The explanation you give for the hangup is perfect. Massey 35's are notorious for hanging up if you shift to fast to (R) especially from 1 to R. Hung mine twice before I learned, just slow down the work aint going anywhere it will still be there when you get it in reverse lol. It's an easy fix but just slowing down the shift is a lot faster than having to walk round trip for the prybar. Good video .

@Mr_Tims

Жыл бұрын

Thanks for that. Just take you time. Guess you have to learn that the hard way sometimes.

Thanks for this video, I helped my dad to get this fixed with the help of this video, our Massey was stucked in same reverse gear.

@Mr_Tims

Жыл бұрын

Great. Glad it helped!

Very helpful. Thank you

Thankyou, mines stuck in reveres up in the woods. I'll bring it out tomorrow.

Great video

@Mr_Tims

Жыл бұрын

Thank man

Thanks that helped I was in abide

My 135 jammed three days ago in reverse. I was told to do this, but I just couldn't visualize what to do. Now I know!

@Mr_Tims

Жыл бұрын

Glad it helped!

4:29 Thanks a lot.

Thank you for showing this video , My massey65 tractor while snow blowing lost reverse even when the stick is in the reverse position it goes forward. Do you have any suggestions for this repair ? Thank you Eric

@Mr_Tims

Жыл бұрын

Sounds like something is broken. Not just stuck.

@ericmiron5525

Жыл бұрын

@@Mr_Tims .thank you, I guess I will split the tractor and have a look .

So I did this and it's still stuck. Now I realize I wasn't depressing the clutch when I pushed it FWD. Does it make a difference ? What else can I do since it's still stuck ?

@caspertheghost7332

2 ай бұрын

I did the same thing yesterday did you get it unstuck

@seandowney5549

2 ай бұрын

@@caspertheghost7332 Yes, after pushing it Fwd it didn't pop out. So the arm attached to gear you must reach inside behind that arm at the front of the tranny and push the gear back again and it popped loose. I was fortunate to have owned a 1948 Willys Jeep @18 and had rebuilt the tranny, similar gearing with a PTO attached. So if it doesn't pop out by pushing FWD, pry it back and it should pop loose. Best of luck !

@caspertheghost7332

2 ай бұрын

Thank you soo much i got it unstuck 🎉