First, I apologize for the poor audio. My videos are much better since 2020 when I got a proper microphone. Here are two other videos you may be interested in: How to make a PADDLE Leather strop: kzread.info/dash/bejne/qGmV0MGxn9LUaLA.html Stropping Compounds and other Stropping Products: kzread.info/dash/bejne/f4SImdqeqZPJhMY.html

@suecollins3246

2 жыл бұрын

Audio fine - content useful and interesting!

@Hungrybird474

Жыл бұрын

I thought it was fine

@williamburns-uw2gf

Жыл бұрын

Found this video extremely helpful for my stropping as was doing it all wrong, thank you Canadian Cutting Edge.

@fredp1983

10 ай бұрын

Was fine my friend... Enjoyed the content...Nice and succint yet informative

Good job Jake. I'm really enjoying the knife maintenance videos - I hope you do more of them.

@CanadianCuttingEdge

7 жыл бұрын

Yes, I have more in the works.

@kwii22789

7 жыл бұрын

yes awesome video!

@albertovelazquez4272

6 жыл бұрын

Wow 😳

Really like to see a good stropping video here. Good explanation about pressure too. Keep em' coming Jake! ;)

@CanadianCuttingEdge

7 жыл бұрын

So you like my high tech graphics? I had to pay a guy a whole lot of nothing for those...

Thanks Jake, for all the videos and information. Aside from cheap leather from a worker (or apron, glove, wallet or belt) I think cereal box cardboard is a great medium for beginners. Super cheap and ubiquitous, easy to replace when it gets knicked or scallops. It takes pressure really well without deforming (even if its only stapled on the sides and not glued and pressed) so beginners who are likely to use too much pressure, wont round as many edges, and that firmer flatter feel helps them see or feel their angle. nobody is going to feel bad if they mess up a piece of cardboard, and yet its really a great medium with very good results.

@CanadianCuttingEdge

3 жыл бұрын

i have not tried that but it should function. It could even absorb some compound probably. I can still see that some people will round over the the cutting edge, maybe not by too much pressure, but still by holding the blade at a bad angle. But yes, less likely to do so than if they started with using a leather belt, as the barbers in movies do, that is not a good idea for beginners. Instead it is much better to use a stiffer piece of leather bonded to a hard surface, or cardboard as you suggest.

Very good video. I was given a strop and green compound by an old and brilliant trapper man. He gave me a demonstration about 15 years ago; the same as you! It's all coming back now. Will be useful to maintain my fishing knives and more. Merci beaucoup !

@CanadianCuttingEdge

4 жыл бұрын

Thanks for sharing!

Thanks for the tutorial Jake!

@CanadianCuttingEdge

5 жыл бұрын

my pleasure

Great video! Played it over a few times to study your technique and to make sure I didn't miss anything! Thanks for posting!!!

@CanadianCuttingEdge

Жыл бұрын

Glad it was helpful!

This is the best most informative video about stropping that I have seen so far. Thank you

@CanadianCuttingEdge

2 жыл бұрын

Glad it was helpful!

Great Jake! It's about time I started to learn how to take care of my small collection of knives.

@CanadianCuttingEdge

6 жыл бұрын

Yes. Even if you only have a few kitchen knives it is a good idea to learn how to maintain them well.

@elstennapel

6 жыл бұрын

I like keep those sharp with a simple pull through sharpening tool and a whetting steel.

Thank you I finally got the hang of this from your video. I know it’s an old one and not sure if you still read these, but I wanted to show my appreciation for the great instructions

@CanadianCuttingEdge

2 жыл бұрын

This is an old one but it is my 2nd most watched video of all time. I get a number of these comments from viewers and I am very glad I am able to help guys with stropping. Check out my video about Gunny Juice - it costs a bit but it makes stropping a LOT faster and even less effort - using the same techniques you learned with Stropping 101. Gunny Juice: kzread.info/dash/bejne/q4hkpsRqqtHZYrw.html

I've got a Spyderco 'Q' knife that I had years ago so I'm going to try it on that! Great vid! Thanks!

@CanadianCuttingEdge

3 жыл бұрын

I hope you have been able to get an awesome edge on that blade.

Thanks, learned all I needed

@CanadianCuttingEdge

Жыл бұрын

Glad to hear it!

great tutorial!

@CanadianCuttingEdge

7 жыл бұрын

Thanks

Great tutorial and explanation. I find tool sharpening very relaxing and just started stropping a while back. Thanks

@CanadianCuttingEdge

Жыл бұрын

Many think of the tasks of getting a great edge on a knife to be tedious, but I enjoy it a lot myself.

@michaeldixon908

Жыл бұрын

@@CanadianCuttingEdge taking the time to really create a significant level of sharp would be alien to a lot of people who are of a “just in time”, rfn mentality.

Thank you for this great info!!!

@CanadianCuttingEdge

Жыл бұрын

my pleasure, thanks for the compliment.

Cheers Mate!

Excellent informative video Jake. I have followed your advice to good results.

@CanadianCuttingEdge

7 жыл бұрын

Thank you Paul.

Finally cut my knives perfectly sharp! Thanks!

@CanadianCuttingEdge

Жыл бұрын

Fantastic!

Good video. Instructive.

@CanadianCuttingEdge

4 жыл бұрын

Thank you!

To all those people who think you are too wordy...stop watching! You can also slowly fast forward. Some people just need to complain no matter the subject. Your videos are fun to watch and very informative so keep up the good work. Have a safe and great christmas. Sorry I got a little wordy😁

@CanadianCuttingEdge

3 жыл бұрын

I agree. After-all, nobody has to watch my videos, there is loads of other stuff on KZread that they can watch. Nobody is making them watch my videos, and nobody is charging them any money to watch my videos either. If they don't like it, then turn it off. I think some people can control me (and other KZreadrs) and make us change the way we do things to suit them. Those people are idiots. I like to here constructive criticism, but being told what to do - that doesn't work. I am sometimes a bit wordy, but I think for many people the extra words are helpful.

@suecollins3246

2 жыл бұрын

It all depends on what the presenter is talking _about_ - _all_ of the talking in this video was necessary but I've tried to watch some videos where, after 3 or 4 minutes the presenter is either totally off-topic or just warbling on about nothing in particular. But this video is _excellent_ .

very informative. Many thanks

@CanadianCuttingEdge

3 жыл бұрын

my pleasure. I have two more stropping videos now with other information in them. How to make a PADDLE Leather strop: kzread.info/dash/bejne/qGmV0MGxn9LUaLA.html Stropping Compounds and other Stropping Products: kzread.info/dash/bejne/f4SImdqeqZPJhMY.html

I agree, there seems to be a lot of aftermarket micron service and that the green has always worked for me. This may sound weird but sometimes after a strop I will call the blade through Wood and then test on paper . The ceramic rod after stropping gets it a little sharper for me on my decade old ceramic rod .I’m really like the Qsp parrot you reccomended . Thanks . Pretty sweet little knife . Broke it in and then added oil after it started to not open fully and Shazam it turned out great with an awesome detent . Didn’t have to do a thing . Straight out of the box turned out good if it doesn’t come loose either I’m very satisfied I might just take the clip off entirely. It seems like one of those knives. Like the bench made 940 I took the clip off that

@CanadianCuttingEdge

Жыл бұрын

It is super common for people to actually make a knife a bit more dull when they strop, it takes a lot of practice to get the system just right so that it makes the blade sharper than any other method can do. I used to carry all my pocket knives just deep in my pocket, that is before the days that pocket clips even existed. These days a lot of the guys who like knives cannot imagine a day before pocket clips existed.

I just started using a compound to strop. I came across a pack of Porter Cable 5 piece compound at Lowes. The 5 piece is more than I need, but I was at Lowes. The pack has a heavy paste (black) to high gloss (green). I made three strops to experiment, and I am going to put the normal (blue) on one, light (white) on one and the green on the third strop. I have the Bear and Sons GATCO 5 stone sharpening system, and I have not determined what combo gives the best results. Thank you for the video Jake.

@CanadianCuttingEdge

5 жыл бұрын

Thank you for that post. I recently started using some compound pastes with my stropping too. I am not ready to make a video about it but there are a lot of good options out there. They do cost more than the type of compound I talked about in this video but better usually costs more.

First Class lesson on Stropping and I Wish I found this Site years ago ! Glad to give Your Channel a Sub Sir .

@CanadianCuttingEdge

4 жыл бұрын

Welcome aboard!

good job thanks

When I used to silversmith I found a green compound called ZAM. It was great. It also would polish turquiose . It will bring silver or stainless up to a mirror. It is finer than pumice.

@CanadianCuttingEdge

4 жыл бұрын

Thanks for sharing your experience. I have never used ZAM. Canadians if you want to try ZAM: amzn.to/2V3aYsj Americans if you want to try it: amzn.to/2yT42oZ

Don't listen to the moaners - I found this an enjoyable to watch and informative video. Great Job!

@CanadianCuttingEdge

3 жыл бұрын

There will always be moaners and groaners. Usually guys who wish they had more intellect and skill so that they could create videos that people want to watch. I am sorry for not noticing your comment sooner, sometimes they fall between the cracks unfortunately.

@gregchandler900

11 ай бұрын

So did i!

@gregchandler900

11 ай бұрын

Ya know I shave with a straight razor and I strop it. Do you ever make videos on straight razors?

Thanks for info....and love the end fraze not ya thumb never heard that before. thanks Paul

@CanadianCuttingEdge

Жыл бұрын

Glad you enjoyed it, I hope you find it helpful.

Hi Jake Im glad you mentioned the edge angle and how others give the wrong advice about angles, I’ve seen people giving the wrong edge angle advice for years! I love a bit of the bob ross you threw in there lol. “Just you and your knife” it sounded like him and I get it. Sharpening, stropping is very therapeutic. Loved the video keep up the great work.

@CanadianCuttingEdge

Жыл бұрын

Thanks Alan. I also find stropping therapeutic. Those who find stropping or sharpening to be an unwanted chore will invariably end up with inferior results.

Wow, the super high end graphic is awesome ! great video, than you.

@CanadianCuttingEdge

2 жыл бұрын

Glad you liked it!

good job, thanks

@CanadianCuttingEdge

7 жыл бұрын

Thanks yang!

So THAT'S what harbor freight is! Always wondered when I hear it in vids! xD Thanks for the great vid! :D

@CanadianCuttingEdge

4 жыл бұрын

Yeah, they wonder the same thing when they hear us talk about Princess Auto - now that is a very strange name, eh?!

GREAT VIDEO. Thanks so much for this little "how to" video. Have really enjoyed all the maintenance videos so far. Keep em coming! :)

@CanadianCuttingEdge

7 жыл бұрын

I have more on the way.

Thanks . Good video

@CanadianCuttingEdge

Ай бұрын

Glad you liked it!

another good 'kiss' video. Nice job. Liked his 'sliding' suggestion and simplicity, Nice

@CanadianCuttingEdge

6 ай бұрын

Awesome, thank you!

Very helpful 😎

@CanadianCuttingEdge

4 жыл бұрын

Glad to hear!

Thanks

@CanadianCuttingEdge

3 жыл бұрын

My Pleasure

Simple and concise. My carving knife actually cuts better now.

@CanadianCuttingEdge

Жыл бұрын

Very good. I find it odd, some people say that the video is consice and others say I am rambling too much. There is no way to please everyone I guess.

I'm proficient in sharpening free hand, so learning how to become proficient in stropping is my next step.

@CanadianCuttingEdge

2 жыл бұрын

Very good. I used to sharpen free hand, but arthritis and now carpal tunnel have me sharpening with a guided sharpening system but free hand stropping is still the fastest way to put that finishing touch on them.

I've had good luck with blue compound. Have a huge brick of it. I like to cut the edge lightly across wood at the end to remove any burr, dirt

@CanadianCuttingEdge

Жыл бұрын

Do what works for you. The last thing I want to suggest is to change things up if they are working well for you.

great video - thanks ! another important thing is to keep the angle until the end of each slide. many beginners tend to go to more than 45 degrees at the end. you see that in movies a lot, too (Inglorious Bastards is one recent example).

@CanadianCuttingEdge

Жыл бұрын

Yes, maintaining the angle is definitely critical.

Hey I'm new to the channel! Looking forward to more like this!!😀

@CanadianCuttingEdge

11 ай бұрын

Welcome aboard!

@gregchandler900

11 ай бұрын

@@CanadianCuttingEdge thanks my friend!!!

For stropping, I have found 'autosol metal polish from solingen' works as the same or even better than the green compound.

@CanadianCuttingEdge

3 жыл бұрын

Thank you for the input. I have been using some diamond infused compounds lately. I will be making a video about them probably in September when I get back home from my trip. I am finding these soft paste compounds to be excellent. If I remember I will buy some of the stuff you use and try it out too.

This was very informative and easy to understand. Any tips for stropping a blade with a recurve?

@CanadianCuttingEdge

2 жыл бұрын

That is a very good question. I am not sure I can explain it in text format. I will add it to my list of videos that I want to make.

Very nice tutorial Jake. I have to admit, stropping is not something that I do very often and is definitely something that I need to practice more. The few times that I did some stropping I ended up dulling my knife even more, probably due to either pressing too hard or not having the angle right. Quick question, now that I sharpen my knives on the worksharp, the edge is convex. Does the stropping technique need to be any different than when it's a straight edge?

@CanadianCuttingEdge

7 жыл бұрын

Stropping works BEST on convex blades. I should have mentioned that. A convex edge is most like the type of shape that leather wants to put on the steel already. But the technique is exactly as I describe in the video for convex or the other classic edge profiles.

@OnTheEdge5950

6 жыл бұрын

Canadian Cutting Edge I just saw a video on stripping and one of the comments from a supposedly knife sharpening expert and he said that he never strops convex edges, I can’t remember the reason why.

Hi. Hope you are still out there. Very good tutorial. Thank you. I’ve been stoning & stropping for a while now but just “upgraded” to a Sharpal diamond impregnated metal stone. 350 rough grit one side; 1200 other side. I like this because a get quick results and no water. I strop with a paddle and I use a razor to scrape off excess compound when it needs it. The diamond stone can be very aggressive and if you’re not careful; you can chew up the blade pretty quick. I move to smooth side and then to stropping with green compound. What are your thoughts on the dry diamond metal stone? Thanks again… Gene

@CanadianCuttingEdge

Ай бұрын

Since making this video I have made the switch to diamond "compound" and my results are better and faster to achieve with less effort and I am all for it. I highly recommend Gunny Juice - kzread.info/dash/bejne/q4hkpsRqqtHZYrw.html dry diamond metal stones for sharpening: For sharpening I use VENEV branded stones, they are simply the very best out there. But they have gotten very expensive because of the tariffs against Russia made products. Outdoor55 is quite bullish on the Sharpal stone for a great balance between low cost and decent results kzread.info/dash/bejne/Z6tml9GDZpqpYaw.html I use guided sharpening systems and there are not as many options for this, and VENEV stones sold from Gritomatic.com are my go to stones - www.gritomatic.com/collections/6-stones-and-strops?sort_by=manual&filter.p.vendor=Venev+Industrial+Diamonds

Great vid... I have tried most coloured compounds we have here in England and have ended up sticking with a chrome cleaning paste.. works very well , lasts ages and is cheap...

@CanadianCuttingEdge

3 жыл бұрын

Thanks for sharing. Just a couple of weeks ago I did a video very recently specifically on diamond paste compounds. - you are very right, a little goes a long way and for a long time.

@drengskap

Жыл бұрын

Fellow Brit here - what's the name of the paste you use?

Good vid, got to find some green compound. Amazon as a pound brick I think.

@CanadianCuttingEdge

7 жыл бұрын

yeah, Amazon has it.but their price is NASTY high. but this is probably the best price they have amzn.to/2kCixDX KMS has it cheaper, but shipping might be more, I don't know: www.kmstools.com/dico-green-buffing-compound-149 I got mine at Princess Auto (do they have that store in QC? They do have it in Ontario.

I use the diamond paste on my strop. It last longer than compound and you dont need very much, small amount goes a long way.

@CanadianCuttingEdge

10 күн бұрын

Since making this video I use diamond too - Gunny Juice to be precise. kzread.info/dash/bejne/q4hkpsRqqtHZYrw.html

Informative video. Thanks! Maybe I missed this part but how often do you recommend doing this? After every usage of the knife or just sometimes? In my case, I use knifes for carving. I sometimes sharpen them using a whetstone but as you said, this usually removes way more material.

@CanadianCuttingEdge

2 жыл бұрын

Absolutely after every sharpening and whenever it feels like the knife isn't cutting as well as I want it too No set intervals, just when it's necessary, which changes depending on what I am cutting - whittling wood dulls faster than say chopping lettuce.

Hi there.. Stropping vs Honing what you prefer? Compound have many grit 2k yellow, 3k yellow or black, 6k green, 12k white and many more colour. And honing like chef rod or spyderco sharp maker use diamond and ceramic rod have some high grit 1k, 2k and ultra fine is 4k grit. Can prevent from remove edge to much before sharpening if edge too chipping.

@CanadianCuttingEdge

6 жыл бұрын

I don't have a preference in terms of one that I think it better to do. I tend to strop more though.

@mohdzaudikhasni8829

6 жыл бұрын

Canadian Cutting Edge thanks for your reply. Next try use balsa wood with 0.05 micron diamond compound, with good steel like vg10 or zdp 189 is extreme razor sharp.

I much appreciate the video - especially the discussion of the compound colors and their best use. I have to tell you, the way your fingers fly around and along the edge of your knives in your videos causes me to gasp at times. But I haven't seen you get cut yet. I find that often I get my best results in stropping by applying some pressure with the initial strokes and then gradually reducing the pressure until the edge is just skimming the surface of the strop. Sometimes I just can't get it sharp without that initial pressure. Of course, I'm not talking about bearing down on the knife, but I hold it firmly against the leather in the beginning and gradually ease the pressure. Almost any leather can be made to work as a strop but in my experience some pieces are better than others. I recommend people use firm leather and not leather with a thick soft side. I agree with Jake that you start with the rough side of the leather but it should not have a deep soft pile. My local hobby store's leather is way too soft and the pile on the rough side is too deep. You want a shorter pile leather that would be appropriate for a belt or shoes. Thanks for the video, Jake.

@CanadianCuttingEdge

7 жыл бұрын

I hope I don't make you gasp much. I don't believe in jinxing myself so I can say that I have never cut myself in that way. Instead I cut myself when I am flipping knives open and closed over and over while watching TV and such. Good advice there. Yes, that strop that I showed that has the cheap handle on it, that is thin and not very useful. I too like the thicker pieces, but not so thick that it has no give or life to it. And yes, I should have mentioned that the suede side needs to light. The heaviest you want to go is how it is on the piece that I had glued on my wood, it was new and after some use the "pile" as you call it, does wear down a bit, but if it's too thick at the start then it just messes up the whole job.

One thing about this hobby, you get finger cuts, I guess it is no worse than having a pet wolverine. :) good tutorial, have to get the green.

@CanadianCuttingEdge

7 жыл бұрын

Well, I won't be getting a pet wolverine - they are not compatible with 16lb dogs.. .

@suecollins3246

2 жыл бұрын

A 16lb dog? I'd back a wolverine against a T. Rex..

@lilymcalister1825

Жыл бұрын

Roflmao!!! 🤣😂 Pet wolverine, you killed me!! Thanks for a good laugh!!

@LilDirt12

Жыл бұрын

I cut myself pretty good once a year. Lol It's one of the hazards.

@otpays8552

Жыл бұрын

Band aid on my thumb ATM

Great video! I have a question. Will you notice a visual difference in the edge when you have stropped your knife?

@CanadianCuttingEdge

6 жыл бұрын

Stropping is a form of polishing, so yes you could notice a difference if you strop long enough. It also depends on how fine you ground the cutting edge. If you just used 200grit then probably not so much, but if you went to 1000 you could make it have a bit better of a mirror edge by stropping.

@OnTheEdge5950

6 жыл бұрын

Canadian Cutting Edge Thank you!

Much appreciated for the video👍. To be honest I like your videos because you're just a regular guy... Like the rest of us an not full of faff!

@CanadianCuttingEdge

Жыл бұрын

Now that is a serious compliment, that means a lot to me because that is exactly how I want my videos to come across. THANKS.

I enjoyed your video. Thank you for sharing. Does the leather need to be a certain thickness for the strop ? I have an abundance of leather which is not thick saddle making stuff but thinner like maybe furniture making stuff. I used it for making arrow quivers and such.

@CanadianCuttingEdge

6 жыл бұрын

No, the thickness isn't mandatory, but I do prefer thicker over thin, it seems to work a little better. Thinner is less important if you glue it to a piece of wood. If you make a strop belt like you see in movies about barbers then you want some leather thats a bit thicker. I think you should be fine. It won't damage anything to use too thin leather.

@chiefkirk

6 жыл бұрын

Thanks pal. God Bless !

So to be clear, if you think you dulled your knife more from stropping, can you make it sharp by just making the corrections like less pressure and shallower angle? Or do you just have to sharpen it again? Thanks

@CanadianCuttingEdge

3 жыл бұрын

Great question David. Now I wish I could add this info to the video. It can be fixed by proper alignment just by stropping but it can take a LONG time. What I did in that case is I put it back in the sharpener and only did the final fine stone for just a little bit and then go back to stropping. For most people it won't take very long to get the hang of it and not have that problem very often.

Go to your local michaels or whatever your areas craft store is called, they sell a bag full of scrap leather for 5 bucks. Usually has some quality pieces in there

@CanadianCuttingEdge

5 жыл бұрын

I'll check the next time I am in the city

@ve7vie

5 жыл бұрын

Thanks. I never thought of Michaels. They are in Canada too.

Thank you for this video. Question for you. It it necessary to clean the old built up and darkened compound from the surface of the strop every so often? If yes, what is the recommended way? TIA

@CanadianCuttingEdge

Жыл бұрын

Yes, once it gets built up too much then its a great idea to remove it. I generally use a heatgun to heat up the surface of the strop and then I use a butterknife or similar flat piece of metal to scrape it off. (Don't overheat.)

A little bit of cooking oil and that compound will spread better and when it gets black you can use s drop to rub out the metal

@CanadianCuttingEdge

5 жыл бұрын

Yes, that is a method I have used in the past, and it does work. I forgot to add to this video that I used a heat gun to finish the application of the compound onto and into the leather.

Omygosh thank you. I get it know 👍🙂

@CanadianCuttingEdge

3 жыл бұрын

Glad it helped!

Thanks for the Princess Auto tip. I had no idea they sold polishing bars. Which aisle is that in? Sorry about your arthritis. I have it in my hands now. Bummer!

@CanadianCuttingEdge

3 жыл бұрын

They have now started selling all sorts of knife making equipment and materials too.

@suecollins3246

2 жыл бұрын

Some advice to both of you. Watch your diet - cut out certain foods like bread and sugar. Lose a lot of the red meat. There are KZread videos on good diets for arthritis and Dr Sven Ekberg is good. But if you have the _balls_ try a five day fast - it induces a type of scavenging of damaged tissue and encourages regrowth. Dr Ekberg has a video on it. I do a three day fast occasionally and I am 65 with less pain than I had three years ago.

After sharpening a knife with a whetstone can I go straight to the fine leather on my strop to finish up?

@CanadianCuttingEdge

6 жыл бұрын

Yes, there is no problem with doing that.

Thanks for the video very informative, but I am completely blind and want to know when using the strop do I sharpen the knife by sliding the sharp edge of the blade first or the spine of knife first while the blade slides down the strop?

@CanadianCuttingEdge

2 жыл бұрын

I am not sure I know how to explain it without visuals. But maybe this will help: Imagine using a blade to shave your face. The blade edge slides on your skin so that the edge will cut the individual hairs. Stropping is the same action but in reverse. This way the edge cannot cut anything during the stropping session. If you need more help then please email me: CanadianCuttingEdge AT gmail.com ( I hope whatever system you use to read text will make sense of that email address, I changed the "@" symbol for the word "AT" so that it wouldn't make a clickable link of my email address. When I make my email address clickable then I end up getting a lot of span) If you would rather communicate via Comments then please start a brand new Comment because I only search for new comments to reply to. Unfortunately I don't have time to had in depth discussions on KZread, but email is okay.

Why when my knife isn't stropped it cuts deeper in a roll of toilet paper (more layers), but pulls my arm hair and it doesn't cut it. But when I strop the damn thing it cuts pretty well hair, but when I try it on the paper roll it bearley cuts 3 or 4 sheets. I'm a bigginer and I use a wide belt hanged on the dor knob, like my grandfather use to do. The only thing that I know I'm doing wrong after your video, is the red solid bar of polishing compound. On the box of the compound that I'm using it just says 'profesional metal polishing 150x37' I presume it is the abrasiveness/granulațione. I live in Europe so the granulațione and color, may mean something else in the USA I'm not entirely sure. Any advice on what I'm doing wrong ?

@CanadianCuttingEdge

3 жыл бұрын

That is an problem that comes from stropping at either too steep of an angle or with too much pressure or a combination of both. Essentially you are rounding the cutting edge over, that makes it a bit more dull. how do I know? Because I used to do exactly the same thing when I was a young man. I even swore off stopping for a number of years, but then I decided to ask some people who were good at it and I learned from them the mistakes I was making and now stropping makes a super popping edge. So less pressure, and hold the knife a bit flatter to the strop. I hope that helps. It takes a bit longer to strop this way, but that's what it takes to get that awesome edge.

@CRIS.V1891

3 жыл бұрын

@@CanadianCuttingEdge Thanks a lot for you're guidance I much appreciated ! And if you can help me with another question, It would be awesome. As I said before I use the method that my grandfather used when I was a little boy, God rest his soule. I hanged a leather belt on the dor knob, I pull on it and start stropping. Maybe I should pull even harder on it, so I don't let the belt conforme to much to the edge of the knife and starting rolling it. Or i better cut the belt in half glue the tow pieces one besides the other, on a wooden bord so that the strop can be wide enouhg. And use a plane surface to strop.

Eureka!!! I've been doing it all wrong. I always went to the stone and ceramic and wondered why my knives are mediocre. I bought a decent strop with base and used the green compound. Amazon. The hair on the arm test scared the daylights out of me, I came up with a ball of fur that only a cat could be proud of. I can see only using the strop from here on in. I don't beat my knives so that's all I would need. Thank You Kindly.

@CanadianCuttingEdge

2 жыл бұрын

I am glad my video was a help. You hit the nail on the head, when they get good at stropping most people find that they can sharpen much less than they used to do.

Great video, Jake - thanks. What's your take on honing steels? In my experience, I get better results with a combination of steel and strop than I do with either of them alone. But as you know, there are tons of approaches to sharpening, and everyone tends to develop a particular personal routine that works for them.

@CanadianCuttingEdge

Жыл бұрын

I find that stropping (as I do in this video) after any type of remedy of a blade edge (sharpening or honing) is helpful - always. There is no one right way to get a great edge on a knife. I am not insistent that my way is best. If you end up with the edge that you want then you are doing a good job. Certainly, three are some ways that are more efficient than others because they are faster, easier, or waste less steel. Does that mean those ways are better? Probably, but it doesn't make other methods wrong.

@drengskap

Жыл бұрын

@@CanadianCuttingEdge Hi Jake - thanks for the reply. You're absolutely right, there is no single right way to sharpen. When I first got seriously interested in sharpening about five years ago, I watched tons of KZread videos on how to sharpen, and just ended up confused, because everyone was recommending different things, many of them incompatible or contradictory (e.g. oilstones vs. waterstones). Ultimately, the only thing to do is to try a bit of this and a bit of that, and find out what works for you. I'm happy with the results I get now, but there's always more to learn!

I have a thick strop that is not backed on wood. o you recommend me to glue it to a piece of wood?

@CanadianCuttingEdge

7 жыл бұрын

I recommend that you use it in whatever way works best for you. If you are comfortable using it as you have it and you are getting good results then I recommend leaving it just as you have it. if you are not happy with your results then sure try gluing it onto a piece of wood. I just use wood glue (the yellow construction type) or contact cement as long as you put it on thin, even with a thick strop you don't want lumps of glue between the wood and the leather.

I have scrap leather at home,which side do I use,the shiny side or rough side? Thanks

@CanadianCuttingEdge

2 жыл бұрын

I use both sides. I use the rough side most of the time, I have a nice smooth side strop for the very final stages of stropping to a mirror polish.

I have been stropping my blades for 30+ years but have only just got around to purchasing some green stropping compound this week. I have been using car polish on the leather for the last 6 years or so. I even tried valve grinding paste years ago after watching a dodgy youtuber & just about ruined my blades. I will be interested to see if the proper compound makes any difference Keep up the good work

@CanadianCuttingEdge

6 жыл бұрын

Cool. A good compound will make your stropping more efficient. I think you can get the same result without any compound, it just takes longer. A good compound makes the process go a bit faster.

@noverno1868

6 жыл бұрын

did it?

@dougbulldog9947

5 жыл бұрын

Noverno Yeh but not really noticeable, the budget car polish really polishes up the blade to a fine shine

@mrthuiwa

5 жыл бұрын

I m chef and amateur woodworker been sharpening knives and tool for 20 years ,I tried lots of different compound and diamond paste but I have always come back to autosol metal polish.

that was import that you said the time, what you doing. I'm doing everything too fast. great video !

@CanadianCuttingEdge

3 жыл бұрын

I am glad it was helpful.

I do not use stones any more, I just use polishing compound. I use Black for fast material removal and white for the final hone.

@CanadianCuttingEdge

5 жыл бұрын

Do whatever works best for you! For me stopping works most of the time too, sometimes the thing just needs a new edge due to damage that can't be polished out.

Thanks. Enjoyed the demonstration and the explanation. If the naysayers don’t like what they’re watching have them go elsewhere.

If you nick your strop you can 're-surface' it by sanding with 400/800/1200 grit and paper until the nicks have gone. Then dress the leather. 4$ saved me buying a new strop.

@CanadianCuttingEdge

4 жыл бұрын

Yes, that re-surfacing works on the flesh side of a piece of leather strop, it works quite well.

Is there a time you should clean your strop if so how do you go about doing that

@CanadianCuttingEdge

6 ай бұрын

Simply scrape off the dirty layer. It's best to use something that is wider than the strop so you can put even pressure across the surface. If your strop is narrow a utility blade will be good, if your strop is wider then a woodworking type card scraper and use it the same way as you would in woodworking but with less pressure Here is a video by a fellow knife guy who shows the process in a short video - kzread.info/dash/bejne/iIaIl6aqhM3Hm5c.html

Nice! How would you clean the compound?

@CanadianCuttingEdge

2 жыл бұрын

A heat-gun and a scraper might work, but you will never get all of the compound off. I don't change out my compound, instead I make a new strop. I buy leather and make my own strops and I have a collection of them.

what makes some of the compounds unsuitable for carbon steel but not stainless? what happens?

@CanadianCuttingEdge

7 жыл бұрын

It's the grit that's in it. It doesn't really cause problems by using the "wrong" grit, it's just less efficient, meaning a waste of time to use the wrong compound. On knives that is. On some of the softer metals the problem could be that you introduce scratches and you just never get the polish you want.

What about Damascus? Any ideas on which color compound?

@CanadianCuttingEdge

2 жыл бұрын

I use the same compound on all my knives, I don't bother differentiating between carbon steel or stainless steel. In fact I have stopped using all compounds other than GUNNY JUiCE - that stuff is STUNNINGLY great for ALL knives of ANY steel type, including Damascus - you can see my video about it here: kzread.info/dash/bejne/q4hkpsRqqtHZYrw.html

Appreciate this! What knife is that?

@CanadianCuttingEdge

9 ай бұрын

That's a Sanremnu 7028 They are no longer available, as far as I know, but my video about them from a number of years ago is here kzread.info/dash/bejne/jGZlss6qYpPWkaQ.html (The quality and detail in my videos has improved over the years)

great video, is there a grit rating on the colors? IE: is the green color compound a 350 grit? 500 grit? 800 grit? etc or is the "Fine" color compound a 1000grit/1500grit/3000grit/etc?

@CanadianCuttingEdge

3 жыл бұрын

You can find a chart for the approximate micron and which colour it goes with here: knife.wickededgeusa.com/forums/topic/new-1500-grit-stone/page/3/ or here www.precision-polishing.com/en/news/diamond-lapping-film

I have a question, do you strop in whatever direction or is it better in a certain direction, like following the grind lines? Or does that not matter?

@CanadianCuttingEdge

6 ай бұрын

Hi Dan. I often change which end of a strop I start from, it makes no difference, well I take that back, it can mean that I use more of the full surface of the strop more evenly than I would if I always did it only from one direction. Good question.

What grit is the green compound?

@CanadianCuttingEdge

6 жыл бұрын

Dialux doesn't provide a "grit" rating with the compound. They simply say that it is designed for stainless steel and I find it works very well for most blades. It is at the budget end of the great variety of pastes and compounds that a person can choose from and I find that it works just fine on all the knives I have used it with. CERTAINLY, there are better compounds available, but not for less $.

How do you clean an overloaded strop?

@CanadianCuttingEdge

4 жыл бұрын

With a card scraper. Just like they are used with wood. - kzread.info/dash/bejne/e6ZlstV_ndOpiJM.html If you can get any flat piece of metal you can try that method - this works only on the suede side of leather, not on the outside skin side of leather. For that side try a kitchen scrubber pad, like the scotch pads, like these: amzn.to/2MRBnoG BUT be gentle and word slow, you don't want to rough up the leather too much. Eventually, you just need to buy new leather

I have valve grinding compound, what can I use it on ? I'm going to make strops , covered in green compound also.

@CanadianCuttingEdge

Жыл бұрын

I cannot say for certain, I have never used valve grinding compound. Is there any information on the compound about what size the grit is. If its in micron sizes then you want to have something under 10micron in grit size. I now use a compound with diamond dust at 6micron for coarse stropping and smaller for polish stropping, as seen here - kzread.info/dash/bejne/q4hkpsRqqtHZYrw.html I hope that helps.

@kylevalucky1003

Жыл бұрын

I tried valve grind compound. Cannot recommend it for stropping.

Love it! You're not a knife guy unless your hands are all cut up and scabs on your hands! ha!

@CanadianCuttingEdge

2 жыл бұрын

LOL. I certainly have my share of scars on my hands. Most were dumb mistakes though - I wish I was a wise guy who kept is fingers safer.

Is there any advantage or disadvantage to a power stropper?

@CanadianCuttingEdge

5 жыл бұрын

yes. Advantage - speed Disadvantage - easy to get it wrong and make your knife dull instead of sharp

This is the way everyone should sharpen new knives and keep them sharp, buying knife sharpeners and stones are mostly a waste and are for when your blade have chips and needs alot of work. Especially for scandi knives a strop and compound is all you need.

@CanadianCuttingEdge

6 ай бұрын

I quite disagree with your first statement because new knives almost always have wonky variable sharpening. 99%+ of the knvies I have reviewed do not have the same angle on either side of the knife and they almost always have over 2° (often over 5°) of angle variability along the length of any given side. Watch this for a better description of what I am trying to say: kzread.info/dash/bejne/eZ6nz7qDY9C6irA.html This means that one would have to try to match this very variable grind angle while they are stropping. So I say first, sharpen the knife properly and THEN you can use stropping to maintain the edge, as long as you don't wait for it to get too dull between stropping sessions.

@BUILT2KEEL

6 ай бұрын

@@CanadianCuttingEdge very true im talking about the average person who doesnt know how to sharpen, they tend to do more damage on sharpeners, ive stropped the micro bevel off my mora garberg there was no need for anything else, took a bit of time on the strop but its theraputic to me

what side of leather should be used?? Nice vid

@CanadianCuttingEdge

3 жыл бұрын

There is no right answer to that question. you will hear people give strong answers both ways. I use both sides. usually I use the flesh side first, and I used the skin side for final finesse stropping. Here is a video on how I make them: kzread.info/dash/bejne/qGmV0MGxn9LUaLA.html

Is this info suitable for sharpening spoon carving tools?

@CanadianCuttingEdge

2 жыл бұрын

Yes, it's the same basic methods for stropping any shape of blade for any purpose.

Newbie do I strop after whet stone or in between sharpining ?

@CanadianCuttingEdge

3 жыл бұрын

yes. Stropping is always for after sharpening, but you can re-tune and edge between sharpening by stropping so that you don't need to sharpen as soon. Sharpening removes a lot of steel compared with stropping, so it's always my first choice. Only when stropping doesn't give me a good edge then I consider sharpening. There is also honing - that is done with a honing steel, instead of sharpening. THAT is what you see chef's doing on TV all the time. What they are really doing is straightening the edge anew. Especially on thin blades, like chef's knives, the very tip of the edge starts to roll over, and honing brings it back and makes it usable again. Less sharpening is one of the main goals of stropping and honing. I plan to do a video on honing and knife steels this year.

Red is good for mirror fnish. And if it is not too difficult for you please upload un cut versions of how to videos I love watching you doing someting even if you say nothing it is like beeng with a feiend.

@CanadianCuttingEdge

7 жыл бұрын

Oh wow, I still get a lot of complaints about my videos being too long. But just maybe I will make a normal and unedited version and see what people think. It won't happen this summer, but maybe later this year.

@shaedontobin9624

4 жыл бұрын

Hey do you know what compound to use for a titanium knife

When would you use the suede side of the leather and when would you use the skin side?

@CanadianCuttingEdge

11 ай бұрын

I use the skin side when I want to get to a nice mirror finish. Use exactly the same techniques I discussed for the suede side. Since making this video several years ago I found something a LOT better than the standard compounds I discussed in this video. It makes stropping even faster and you can get super results with less effort. If interested check out this video - kzread.info/dash/bejne/q4hkpsRqqtHZYrw.html

@stephenwebb1442

11 ай бұрын

@@CanadianCuttingEdge thank you very much for the quick reply. It may have seemed like a silly question, but I am very new to making knives and swords and unfortunately putting a decent edge on the knives is not my strong suit and I have found it very difficult so I appreciate your timely response, and I will check out the videos you have suggested thanks again

watch my video on stropping. When you put a lot of pressure on the blade when stropping, it's way more effective, but you need to strop at a low angle, like that the edge start to convex but still very sharp.

@CanadianCuttingEdge

7 жыл бұрын

In my experience a lot of pressure leads to less sharpening. It is because it is much more difficult to keep a low angle because as my super high tech graphic shows - a lot of pressure makes the leather wrap around the edge causeing it to rub the tip off instead of sharpening. I do see your point, and I agree that it can work to use a lot of pressure, IF your leather is quite hard and if you only use the skin out side, and if your angle is, as you say, very shallow. I think most people won't replicate all of those "IF's" and that is why my advice is what it is.

@frenchieedc7602

7 жыл бұрын

I understand your advice. It's true that most people won't replicate all of those "IF's". I sharpen my blades with a very precise process. My edges are always sharpened at 15 degree per side with a 20 degree micro bevel and i reduce a bit the edge shoulder with a 10 degree angle (all this made with a Edge Pro),it make stropping at a low angle easier when you reduce the edge shoulder like i do. So for edge maintenance i always use my strop with a lot of pressure and if the edge is to damaged i use my Spyderco Sharpmaker and then a strop. All this stropping with the reduced edge shoulder will make a very nice, sturdy and sharp micro convex edge on my blades. (check my video on stropping if you want to see that). (sorry if my english is not perfect, i'm French)

can you use any type of unrefined leather for this? Is the paste a must or does it work also on plain leather? Thanks,

@CanadianCuttingEdge

6 жыл бұрын

Some leather is better than other leather, but any leather is a good starting point. You can buy pastes or use the compound in bar form. the bars are more ecomomical and the pastes are a bit more money. If you are going to use a paste then I also suggest you get some good leather. Make sure it is vegetable tanned for the pastes. If you use unrefined leather it will likely soak up a lot of the paste inside the leather where it won't benefit you. tanned is best but unrefined is better than nothing.

@nino71

6 жыл бұрын

Thanks. I appreciate your videos and the time taken to answer my comment. Regards from Italy

Do you ever put oil on the leather first to help absorb the compounds?

@CanadianCuttingEdge

3 жыл бұрын

No, I have never done that. I think it MIGHT be okay to try that, BUT it could be a bad idea if the oil you are using is not compatible with the oil that is already in the compound. It could cause separation and end up making it harder to get the compound into the leather. This video is several years old. I have moved on to using diamond compound paste. I have a video about it: kzread.info/dash/bejne/f4SImdqeqZPJhMY.html Since these diamond pastes are not hard they can be much more easily incorporated into the leather than the hard green stick I was using in this video.

Sir,I want to ask if stropping with just leather will polish the edge of knife?

@CanadianCuttingEdge

4 жыл бұрын

Yes it will. It will just be a lot slower of a process without compound but it does work.

The weight of the knife is the key

@CanadianCuttingEdge

6 жыл бұрын

it is important

Hi I have a Gerber knife. I can get my stainless steel knives razor sharp very quickly! But the Gerber is extremely hard to get that sharp edge like on my other blades. I used green compound. Maybe too much? Am I doing something wrong? Or is the Gerber brand high in carbon? I found dremel compound made it sharper to slice through paper quite easy but when I I went to green? It polished the edge to a shine and it became dull in that it wouldn't cut easily through paper? Btw the blade is quite thick. I've had Gerber for over 10 years now and used to shave my forearm hair like a razor. Any reply appreciated cheers from Australia just subbed.nice work! Clear tutorial! Top job!🙂👍👍👍

@CanadianCuttingEdge

2 жыл бұрын

Hi Dragan, welcome to CCE Gerber uses a wide variety of steel types in their knives, so just the brand name doesn't give much information at all really, I would need to know the exact model. But Gerber tends to use fairly soft steels, usually stainless steels but they also make carbon steel knives. The most common problem that results in a blade being dull at the end of stropping is the amount of pressure that people use. If you push to hard with the knife down onto the leather it will result in a beautiful edge but it will be rounded over at the apex of the edge resulting in inability to cut well. The second most common cause is that people strop at a greater angle than the blade was shapened too, which means you might not be stropping with the knife at the same angle to the leather as it was to the sharpening stone - these angles need to match perfectly. Finally, you did bring up a third common problem and that is too much compound being used - You don't need a lot of compound on the leather, just a little is necessary. too much causes it to not work well, but the other two reasons are much more important. too much compound is mostly just a waste of compound. Since I made this video I found a new compound that I find to be perfection. It's called Gunny Juice, it is more costly but it's stunningly good, but It;s probably VERY expensive in Australia since it comes from a small company in USA (but the above problems apply to it as much as they do to green compound). See my gunny juice video here: kzread.info/dash/bejne/q4hkpsRqqtHZYrw.html Please email me if you have further questions: CanadianCuttingEdge AT gmail.com

@dragan3290

2 жыл бұрын

@@CanadianCuttingEdge thanks for the reply! Highly appreciated!👍👍👍

@dragan3290

2 жыл бұрын

Excellent channel!🙂👍👍👍❤

What do you make of the three inch leather wheels for a drill?

@CanadianCuttingEdge

3 жыл бұрын

I have not used them to strop, so I can't say for certain, but I do find machine stropping can take a lot more time to get the hang of.

@50kArchipelagos

3 жыл бұрын

@@CanadianCuttingEdge Yes. It's taking time. Better and better, but it's an acquired skill like other stuff. Slow, securing the drill, bitting up, all that. Tearing it down. I'm just not much of a hand at knives. Never have achieved those paper cuts others get. Maybe I gotta go to Spyderco level quality to get that done. Thinking on it. Easy to buy sharp, hard to keep. I put your Sanrenmu in my cart for Sept. 1161.

Hey, Good video, where I can get that compound, it is impossible to find it here in Canada!!!

@CanadianCuttingEdge

7 жыл бұрын

I got mine in Canada. Princess Auto has some compound in their stores, usually its quite dried out though. I got mine via Amazon.ca

@VA7AYG

7 жыл бұрын

Canadian Cutting Edge I was looking for a store, the us price is for $6 and the cheaper one I found online in Canada was about $20. I finally found it in Lee valley store. They have one of the best one. Thank you for the reply though!

@ve7vie

5 жыл бұрын

The green compound at Lee Valley is $16.50 Cdn now. They are out of the cheap ($30 Cdn)) strops but they sell leather strips (6 for $20 Cdn).