That's a great idea .....love this never thought about a grader

Genius I am definitely going to try this thanks

I can't believe I have never done this, great idea! Love the peeler one. I've only just found your channel, was recommended on my analytics page, have joined you 👍

I can't believe I haven't thought of this. Thank you

@kave9482

Жыл бұрын

Same. The cheese grater!

Fine ideal too.simple nice to share

Awesome getting into electro cultural ❤

Bravo à vous, Merc Au plaisir. 👍👍👍

Yes my friend you are the King. Great video, Thank you. T.

Thank you broo!❤

Ótima ideia de reaproveitamento que legal aqui e BRASIL

Obrigado por compartilhar ❤

Thanks for tricks

Good ideas

Вот это круто. Завтра попробую

I process electric wires in diameter from over 30mm and all the way down to o.2mm wires, without any tools. I don't even waste precious time cutting off the plugs/connectors. The solution is: Pyrolysis. Years ago I bought a professional stripping machine; waste of time! In each pyrolysis run 50 kg of wires are processed in each batch. Processing time: 1 hour; total working time: maximum 10 minutes! After completion of the pyrolysis process all connector pins are easy to pull off, as they are completely free of any plastic. Don't waste you time by trying to pull small gold plated pins out of plastic connectors; they are pressed into the plastic, or the plug is moulded around them. Gold plated pins are separated out for later gold recovery, the rest is thrown directly into the brass bucket. Pyrolyzed wires are easy to sort out into individual fractions: Bare bright copper, for electro refining to 99.999% purity / low value aluminium wires, for melting into bars / tinned wires, for valuable tin recovery / nickel wires, for nickel recovery. 99.9% of all scrappers consider the plastic insulation as annoying garbage. How foolish! By pyrolysis you'll recover every single bit of value. The yield is not only the metals, but also Raw Pyrolysis Oil, which in a later process is cracked into free petrol/gasoline for the car, free diesel for the truck, and free viscous oil for the metal melting furnace as well as free heating of the workshop. A word of caution: All internal wires from electronics contains Fire Retardants (FR)! Usually brominated, which means hazardous Bromine will be released during pyrolysis. Such wires are always processed separately. The Bromine is recovered and sold as either elementary Bromine or NaBr. Warning: If anyone want to engage into pyrolysis he/she must be aware that 99% of electric wire insulation is made from Poly Vinyl Chloride (PVC) plastic. PVC plastic contains 57% Chlorine. Upon heating, during the pyrolysis process, a huge quantity of deadly Chlorine gas is released. It's important that this gas under no circumstances is released. The pyrolysis unit must be constructed as a fully closed system capable of capturing all Chlorine. The Chlorine gas is converted into free HCl (hydrochloric acid), a very useful chemical for hydrometallurgical processing of e-waste, Precious Metals recovery, and many other processes. Also be aware that after pyrolysis of electric wires, the carbon residue in the pyrolysis vessel will be contaminated with poisonous Antimony. This dangerous element must be extracted before the carbon can be used. As the boiling point of Antimony is 1635 C no vapor is created, all Antimony will remain in the carbon residue. It's worth mentioning that this video only show stripping of single strand electric wire. Try this method on multistrand wire and you'll cut into the individual thin copper threads, resulting in an inevitable loss of a great part of your copper. Further the insulation is extremely thin on o.2mm or o.4mm wires, making it impossible to strip such thin wires by this method. I recover 100% of the copper by pyrolysis. A final remark: Potato peelers and also graters have a very fine thin sharp edge. Plastic is well known for wearing down cutting equipment very fast, due to the added fillers. Among the worst is plastic made for wire insulation, containing not only plasticizers for softening, but also a large amount of fillers for UV protection and enhanced weather protection; some of these are very abrasive. Kitchen utensils used for this purpose will become dull in no time.

useful :)

I’ve tried a lot of different methods but when your stripping a few hundred pounds at a time a machine is money well spent imo

Good idea 👌👍🏻

@CopperKing

Жыл бұрын

Thank You

Просто гениально.....

Great ideas here, you don't need any fancy equipment!

@6980869

Жыл бұрын

Try using those ideas with bigger gauged wire, or a large quantity of it. Nope, a’int gonna….

@jimmypoole9480

2 ай бұрын

Get a bigger cheese grater 😂​@@6980869

Thanks bro❤❤❤❤

@CopperKing

Жыл бұрын

🤗🤗❤️

Where did you buy the initial hand vegetable grater?

NO FUCKING WAY!!! omfg that's crazy with the potatoe peeler!!!

Super

@CopperKing

Жыл бұрын

Thanks

What about the thin wires with a lot of coper lines? You can "clean" these wires if you heat them with a hummer...

Where did you purchase your stripper.

I think shaving blade will also good 👍

Faz no frecsivel no rigido é fácil

If we are buying tones of scrap cable wires, how to negotiate the price of copper. We cannot estimate the kgs of copper without stripping of the wire right. Need some expert advice

Any links that sell that device?

Так так.Пойду проверю🤔

Show!

Cool, but how's it work on multi strand wire..?

@bootleg1514

Жыл бұрын

I've watched a bunch of video's like this. The tiny multi strand wire is the hardest to strip.

@bootleg1514

Жыл бұрын

I strip all of my wire by hand. I use my multi tool, needle nose pliers would serve the same purpose. I put a 1x6 plank of wood on my coffee table and I use the box cutter i keep for work to cut the insulation as I pull the wire with my multi tool. It works better than any other method I've tried. Replacement blades are cheap. You get a feel for it.

Where I sell copper?

신박하네

Нужно посмотреть, найти у Вас видео по витым проводам

Use a 🥔 peeler. Same. Thing 😊

Grest ideas! Simple, safe and easy to use. Thank you for sharing.

@CopperKing

Жыл бұрын

Thank You

@matthewrios7549

10 ай бұрын

​@@CopperKinghow you get do you get the copper out of a HDMI cable if they any copper

Necesito un rayador de verduras para pelar cables , genial es lo mas 😀

👍👍👍👍👍👍👍👍👍👍👍

Faxibal wire

Viva Christo Rey

Name of the tool bro

Ahmad Sir ji wire se copper nikaalne ke liye jo pehle tool use kiya uska name kya hai sir ji please reply

@stevenchow408

2 ай бұрын

Peeler for fruit vegtables

interesting to see that you can use a beard shaver and a Cheese grater to strip wires

احرقه افضل من هذا التعب❤❤😢

What is the name of first mover

@guidobeekelaar5819

Жыл бұрын

Patotopealer

@tracieclarkson6939

Жыл бұрын

A potato/vegetable peeler.

Ага, одножильный, я тебе без всяких приспособ раздербаню! Ты попробуй многожильные!!! А.а.а.а.а?)

@CopperKing

Жыл бұрын

Так зайди на мой канал, у меня дофига приспособлений для многожильных проводов

ЗБС способ

Stripping cable is a time taken v price paid for stripped cable / bright wire. The majority of cable is not worth stripping as your hourly wage is very small. Stripping cable by hand is hard on your fingers and wrists, if doing a lot of it buy a machine

😅😅😅 10

وحنا نولع فيه النار هههههههههههه

A potato peeler is good

Romanian "korn"

You can sell this copper for more right

Одножильный провод проще всего чистить. На многожильном проводе твой метод не будет работать!

damn,i didnt know wat copper was, me and my dad threw away a tv, and hundreds of cables😢

@6980869

Жыл бұрын

How is that even possible?

Yeh naram wire hogi, kadak wire nahi hogi

Why you do that

😂

Is that an old razor or potato peeler or?

Ehh

Is that a potato peeler?

Hardly worth the effort with those cables.

Whoever is striping wires knows it is one of the dumbest ideas ever

All well and good for solid core cable. Would not work on multi strand. Even certain types of proper cable strippers have trouble with multi strand as used for majority of equipment power cables

The question you need to ask is it worth the time ... if u strip 1 pound every 15 minutes (which wouldn't be easy ) BARE bright is around $3.50 a pound I think?? You are making $14 per hour , where if you scrap it with the insulation on you get around $1.20 per pound , it takes no extra work and you are gaining the weight of the insulation itself. The stranded wire is definitely not worth stripping , cash it in as is..

@thadofalltrades

11 ай бұрын

Might depend on your volume

I save time getting rid of the wire insulation by throwing a bunch of wire in a fire. I've been doing it for decades.

@levivoss2722

Жыл бұрын

Bruh

@roberthooper8883

Жыл бұрын

so YOU the reason for global warming and pollution??

@rickprusak9326

Жыл бұрын

@robert hooper When you see fire & smoke coming from 55 gallon barrels at a junk or scrap yard, do you really think that they are "warming" barrels for the yard employees? There's more than paper and wood burning in them, Bobby.

@rickprusak9326

Жыл бұрын

@@levivoss2722 Thaah

@roberthooper8883

Жыл бұрын

@@rickprusak9326 So you think that makes it ok to put more pollution out? Is that REALLY what you are saying ricky-boy?