Stripes like this for $29.95 make your own stripe kit
Stripe your lawn like a KING for $29.95
I have been using this mat for years works great and nothing to trip over hanging out behind the mower and no worries about hitting anything on turns.. No tail swing
make your lawn stripes show up better with this stripe kit! #fescuefreak
its very easy to make your own stripe kit
Пікірлер: 115
Look at these lines! Wow! That's gorgeous!
@FescueFreak
2 жыл бұрын
thanks!!
Great idea. I use a stand on ZTR and was wanting some sort of striper that wouldnt get in the way of getting on and off the mower. I'm going to give this idea a shot!
@FescueFreak
2 жыл бұрын
It’s the best never in the way at all!
Nice DIY solution there ... thanks for the video!
@FescueFreak
3 жыл бұрын
Thanks for watching man! You see it works
Heck yeah man! That pretty damn cheap to have the best stripes around! Great video Olee!
@FescueFreak
2 жыл бұрын
Thanks man!
Genius and inexpensive! Great idea!
@FescueFreak
2 жыл бұрын
Thanks ! And it works great
Just saved me about 30$ on my gravely. Been buying rubber from lowes/hd for my gravely and doin this for years but not near as thick or same size sheet for price. Plus it falls apart every year. Thanks man!
@FescueFreak
2 жыл бұрын
No Problem man Thanks for watching
I just came to see those stripes! I give it to ya...thats the nicest examples of striping ive seen. beautiful property. mudflap experiment time for the timemaster. ill try 1 inch above.....
@FescueFreak
4 ай бұрын
thanks
Love this, thanks!
Such an insane lawn!
@FescueFreak
3 жыл бұрын
Thanks man!!
@DynamiteDJsRichmond
2 жыл бұрын
Robin Banks is now here! 😄
Damn nice stripes!
@FescueFreak
9 ай бұрын
Thanks!
Nice tutorial! Looks like it works to me!
@FescueFreak
2 жыл бұрын
Thanks Man works dang good!!
Nice that's exactly what I need 🤙🤙
@FescueFreak
2 жыл бұрын
Get it done!!
30 bucks and you get the pride of doing it yourself. Hell yeah I'm in!!
How did you figure out the height to mount that strip vs your deck height? I am currently testing that same mat but dragging 4' by 18" piece off the back. Would like to not have the rear supports sticking out.
Learning from the master!
@FescueFreak
2 жыл бұрын
thanks!
I'm going to try this for my toro timemaster 30!
@jadd6810
Ай бұрын
How did it work for ya? Where did you attach it?
@nathanhorn8003
4 күн бұрын
This is my plan as well. Did it work?
It looks like cutting the matte is the hardest part.👍🏿👍🏿👍🏿
The headline reminds me of the end of Can't Buy Me Love when the heavy girl tells Ronald that "You could have had me for $49.95."
@FescueFreak
3 жыл бұрын
I was looking to get your attention.. Did it work?
Wow !!thank you for sharing with us ! Great job !!!
Well, guess what I'm going to make? Thank You!!!
Those cordless ratchets are really handy.
@FescueFreak
3 жыл бұрын
Yes Sir! Will speed up a project for sure
hey olee. Im curious about making turns with the single strip. when u are spinning, half of the striper will be rotating in one direction, while the other half rotates in another direction. do u have issues with ripping up the grass while turning?
@FescueFreak
2 жыл бұрын
No issues no ripping.. Both tires are always turning never dragging
How long is the bolts and dimensions on the steel backing please.
Great Work bud. Love it 💪 #raddad
@FescueFreak
2 жыл бұрын
Appreciate it!!
i have a husqvarna mz61 and the deck curves once it extends past the wheels so do i put the strip around some of the bend or just the flat part
@FescueFreak
2 жыл бұрын
It only needs to cover the grass between the rear tires! If possible I like for the mat to run center to center of rear tires
Hey there! I’m planning on going this over the weekend. How many inches “tall” did you cut this?
@FescueFreak
2 жыл бұрын
That depends on each model of mower they’re not all the same ride height.. Best thing to do is to set your mower on level ground preferably concrete set your mowing height and then measure from the concrete up to the deck I leave at 1 inch off the ground
@ThomasRodriguez
10 ай бұрын
@@FescueFreakany issues with going in reverse at that height? I would imagine once on grass you probably get even closer to the ground technically. Have you found that it still works if you raise or lower your cutting height a half inch?
What are the dimensions of it? Specifically how much matt is hanging down below the deck
@FescueFreak
4 ай бұрын
I said mine up at 1 inch off of the ground at desired mowing height.. Far as the length goes it needs to go from tire to tire
What about a push mower?
I'm glad my mower deck don't look like that.
🔥🔥
@FescueFreak
6 ай бұрын
Thanks man
@sjm1978
6 ай бұрын
@@FescueFreak welcome
So if you cut your grass on 4 inches you want 3 inch of mat hanging below the deck?
@FescueFreak
2 ай бұрын
You want the mat at 1” off the ground
@troygibson6690
2 ай бұрын
@@FescueFreak so if you change the cutting hight you will have to reposition the mat correct?
@cpsmonroe1
Ай бұрын
@@troygibson6690yes with his formula it always should be 1” off the ground . Starting at that 1” mat spacing if you were to Raise the deck 2” that means lower the mat 2”. Or Lowering deck 1” means raising the mat 1” .
@edgarandrews3691
Ай бұрын
I love it. I got horse mat everywhere wasn’t going to buy that expensive roller.
Does it work do u have any videos of you mowing with it ?
@FescueFreak
9 ай бұрын
Yes please check out my mowing videos
im just wanting to know how u striped that lawn like that lol
@FescueFreak
Жыл бұрын
Watch the how to mow ZIG ZAGs video!
Try a circular saw works well to cut Faster than the knife
@FescueFreak
Жыл бұрын
May smoke a little that mat is thicc
I’m wondering if I’m cutting at 3.5 how many inches should be hanging off the deck? If it’s a 52in zero turn
@FescueFreak
4 ай бұрын
I set my up at 1" off the ground at desired mowing height for maximum stripes..
@leofowler5812
4 ай бұрын
So if I’m at 3.5in install the mat to where 1in is below the deck while the deck is raised correct?
@oakleyjack7600
23 күн бұрын
@@leofowler5812Simple, put your mower on a flat surface, set your deck height to what you normally mow, set the rubber on top of 1” wood blocks or something near that height and then drill your holes and bolt in on.
I bet the neighbors hate walking outside lmao.
How long do you let you grass get and then cut?
@FescueFreak
Жыл бұрын
I'm mowing at 3.75" so 4- 4.250" keep the lawn cleaner of clippings
@Todd408.
Жыл бұрын
@@FescueFreak it left lines but not like it was when I was mowing at 2.75in. But I kept it at 3.37 and mowed and then I dropped my deck all the way down without PTO on and now it’s rocking them!
Dam ur on KZread too. following
@FescueFreak
3 жыл бұрын
lol.. I have always want to make videos I just suck at editing
Only bad thing with that,is you have to cut the grass the same Hight if you go any higher,it won’t stripe,,and if you go lower it will rip your grass up
@FescueFreak
2 жыл бұрын
Good thing is I cut my grass at the same height all year and it works perfectly!! When it’s time to over seed and I want to do a 2 inch scalp I just unbolt the striper..
I'm living in 1960 s
Tried this on my Bobcat didn't work ...Any suggestions on why it didn't work ...
@FescueFreak
Жыл бұрын
you have the mat placed 1" off the ground?
Just come to my house every week and mow. I'll let you KZread it in exchange for the mowing.
@FescueFreak
4 ай бұрын
lol I do love to mow
How’s this holding up a year later?
@FescueFreak
Жыл бұрын
I’m still using it
Keep em straight
@FescueFreak
2 жыл бұрын
Yes Sir
Please someone tell me why it's not working for me please
@FescueFreak
3 жыл бұрын
The kit or the grass itself? What type of grass do you have
The art of striping by Olee Poole. No one does it better than you. Big League Lawns is going to pay you to take this video down lol :) #stripermanapproved.
@FescueFreak
3 жыл бұрын
Thanks man!! I have always wanted to show people how I made this stripe kit “rubber mat”.. I should have this video out three years ago..
Let's see it work?
@FescueFreak
Жыл бұрын
Will do.. Just loaded a few new videos
Guaranteed he putted way too low from the grass big Readjustment😅
First!
@FescueFreak
3 жыл бұрын
No thumbnail..?
@TheLawngineer
3 жыл бұрын
@@FescueFreak looks blank
@FescueFreak
3 жыл бұрын
@@TheLawngineer It's all good now ??
@TheLawngineer
3 жыл бұрын
@@FescueFreak all good!
@alexalb5256
3 жыл бұрын
Stumbled upon your little KOTG Community. I know the KZread lawn Community seems pretty tight, there’s just something different about you little group! It’s cool to see you guys collaborate
Demo
59.99 for horse mat today 😢wtf either horses are wearing Nikes or must be a rubber shortage 😂
@LIGHT7CODE7
3 ай бұрын
Are you sure your looking at right product. $34.99 here and he bought his in 2021 from the receipt. Nothings cheap any more in America.
Pov: you came here from tiktok
@FescueFreak
2 жыл бұрын
Thanks
@austinlindstrom7769
2 жыл бұрын
Yea
$30.00 and whole lot of work installing 👎
@FescueFreak
Жыл бұрын
Lol.. If that’s a lot of work you must NOT accomplish very much in a day..
@davebybee8547
2 ай бұрын
Scared of a little work ?
@JasonC__
Ай бұрын
Must not accomplish much in life with that kind of thinking😂
I need to find a "tubafore". 🤠 Striping like a boss
@FescueFreak
3 жыл бұрын
Thanks !!