Thank you soo much for the lite bright shirt and poster and for seeing it

Busy Winter schedule, and there has to be interruptions by actually driving those vehicles! No worries, Bec; some people just have to find something to “pant” over! So much fabricating, so much fun! Chris always seems to see problems before they creat trouble and knows how to fix them. LiteBriteNationTrussYouCanTrust!

The complete guard on the hydro steer unit looks awesome. Looking forward to the rest of this build.

This channel is loaded with cool vehicles but the LJ is the one I’m wanting to see the most. I’ve see guys running Dodge D60’s and they all have those angled steering rods and it just looks like it would kill ram seals..the extra effort to tip that pan up is a smart move! Chris the fact that you have no compromise when comes to stuff like this is a great trait..you just can’t settle for anything halfassed and it shows in the final product. I’m look at upgrading from my MM250 and I thought you guys had a new multi-process Miller …you love it or are there anything that you would change about it?

Those heaters will warm things up but they will also burn your eyes and give you a headache from the fumes they create

I generaly hate when days are too hot, BUT working when it's cold is a absolute nightmare. These diesel burners are so great, a bit thirsty but works so well

I LIKE THE ATTENTION TO DETAIL CHRIS PUTS INTO A PROJECT!

I Love watching Bec and Chris working in the shop. You guys are a great team! Gives me moto to get in my garage and work on my project. Getting started and stopping are the two hardest parts for me. The shop is awesome and getting better every day. Your talent is very impressive Chris, I hope to be half as good someday. Semper Fi

Always a great video when Chris and Beck are in the shop. Merry Christmas to the lite Brite Nation family. Godspeed

Great video guys!! Bec you're a freaking awesome welder!!! I'm glad Chris isn't afraid to change things around until they're up to his standard . Stay warm, I hope everyone is having a great day ❤❤💯🤙

*Channels my best vintage Rock* Finally, the LJ HAS COME BACK to the channel.

Those jet heaters are great. Love mine. Great video. Thanks for sharing.

Another fun video, full of awesomeness. I even laughed. Can't believe people would think anyone would weld with exposed skin, but it puts a whole new spin into welding. The axle looks like a beast. Love the mods, thinking it through and the adapting. Chris's calculations and knowledge, with Beck's welding skills and charm make such a great team. Can't wait to see this build working on the trails. You all know I quit my Sunday job as to not miss your Sunday morning videos.

Snowball is coming right along!

You guys are just awsome.. cant wait for becks jeep to be done so we can see this thing in action 🙌

I don't always weld without pants, but when I do, it's in the middle of winter, like a Boss!

While I wouldn’t mind seeing Bec weld bottomless I’d hate to have harm come to her legs. The build is coming along freaking awesome!

Love these episodes! So pumped for the upcoming build projects. Still waiting for Lite Brite to foot the bill for Chris to build his ultimate rig

The welds are" PERFECT"👍👍👍👍😎🇭🇲

Bec, your jeep is gonna be awsome. Don't let the boys get distracted. Let's get your baby done.

I've been waiting weeks for another LJ video and finally got one. There's just something special about an LJ. I wish Jeep would come out with a modern LJ. Can't wait for the final build!

Looks like it's going to be a long Winter in the shop! The price for playing hard with your toys! Looking forward to all your repair videos! Happy Trails to all of you!

Had to watch again. Love Chris and beck

These fabrication videos are awesome! That front end is Saweeeet.

9:00 wow Chris, that's so clean can not even see the welds, skillz!

Getting after the LJ project! Gonna be cool. Love dirt

This Channel is the best !! It should be at 500,000 subscribers already.

Those heaters are awesome 😎. Great work guys!

I got to admit that the shop videos with Beck and Chris are my favorite. LET THE WINTER CHRONICLES BEGIN!!

I almost stopped the video and fell back to look for the pantless video.. too important to miss lol love what yall do

bec is kicking your ass welding, love the videos

Fun times in the shop. Shop days are great 👍.

These comments are mostly to Bech, cause I see her welding the most. I am retired welder and I have COPD. I can't prove its from the welding but I notice you usually are directly above your welds and therefore in the smoke stream. Please check into getting a respirator that rides on your back or one that fits under your hood. I am 77 and I hate to see young people exposing themselves to potential harm. God bless you guys take care and be safe. Love your build videos.

Not crushing on Beck but love to see her and Chris back in the shop lol

Keep it up guys !!! You all do amazing work!!

I’ve been looking forward to seeing this getting done

Always a pleasure u two God Bless

I have one of those forced air heaters in my garage. They do a good job. If yours is like mine, it can burn multiple fuels. If you can burn kerosene instead of diesel, it will burn a little cleaner which is good for a closed in space.

Seeing you in the shop is just as fun. Your welds are killer Beck a lot better then me. Lol God bless take care.

Great job once again Bec and Chris. Kevin was awesome as well. We love the build videos

I removed the center pull opener on my shop doors and went to jackshaft drive. Easy change up and would work better with your lift.

Love shop videos. Thanks. Until next time... Weld/wrench safe.

The pantsless welding comment about took me out. They can only hope! 😂 Good content as always.

Hell yeah back in garage

Beck having to explain her pants is freaking ridiculous and funny. Another great video guys.

I welded my whole life from high school but I always burned my feet right through my socks but I just found the racer socks and they are fireproof so that would of been nice maybe 50 years ago! 🤪

yesssss I cant wait to see this LJ finished

dream team right here.. great job

Please don't forget about the mini truck content during your winter rework session.

Bec you should put your name on the plate before you paint. It's starting to look good. Yall two are a great team together. Just a reminder no cookies and milk this year. Bacon and coffee and shot of whiskey.

I'm so happy to see Beths Jeep getting some love awesome work guys!!!

That’s axle and hydro mount looks insanely massive under a plain frame! Haha

@WoodyRides

Жыл бұрын

I thought the same thing. It’s huge!! That’s what she said! 😂😂😂

Awesome video. Love the builds with Chris and beck. Hopefully the winter is full of these. Beck was looking pretty hot today. Hopefully Chris and beck are a couple. They make a great team

Love the video's of you two, keep them coming!

Send it ❤

Yep those big ole heaters work...but they have 1 output. But you may be able to add a temp control for it if it will light itself. But they have fumes, consume oxygen and expel Carbon Monoxide too...NOT good. If you get it temp controlled you can connect the cord to a smart outlet and program it to fire up in the morning say 1 hr before starting in there...That's the good life...walk into a warm shop. I got a regular forced air furnace and had a plenum built for the top with basically a big hole in the front. The furnace sits about 5' off the floor so I still have storage under it. Then the plenum angles down a little. A regular Tstat operates it. I had Nat Gas available and use that but a Propane tank is just about as easy...furnace just has to be setup for it.

I love this series of videos on Bec's LJ. I have a 06 LJR and have been watching with interest for some upgrades to mine!! Great work and love the chemistry and teamwork!!!

Merry Xmas and happy new year too may it be full off fun and joy

Looks like bec is a happy camper lots of smiles love it .don’t sweat the welds .lookin goooooooooood .👍👍👍👍👍👍👍

Beck is sewing with fire!!! Awesome job!!!

Bummer two steps forward one step back but it looks good. Toughest looking axel I’ve ever seen.

These build/maintenance vids are the best ones. Going to be a good winter!

Is that one of those new After Burner warmer-uppers. Chris ought to fabricate wings for it and fit it with some armor piercing armament!!

Such a great team. If I ever win the lottery I would bring my truck to you two to bring it to the next level.

gee...19 ain't that cold, what's wrong wit ya?... Its always bbq weather...haha

"The Stretch Child"

The electro-cute ending gets 2 thumbs up!

Great show as usual loved every second of it and great idea to change the kit to fit better and work better for the application awesome work guys

Awesome job can’t wait to see it wheeled 🎉🎉🎉🎉❤❤❤

Living your best lives!

Great video. Love watching you guys in the shop. Question....why a big torpedo heater? Why not do a vented heater hung from the ceiling? Would be quieter, cleaner, and not take up any valuable floor space.

Bec, I’m guessing you go through different phases with your weight training. Bulking and cutting maybe. Whatever you are doing now, your face looks really pretty. Jeep’s gonna be killer.

Man you guys are such an awesome team there is nothing that phases you!!!

Take a look at a Goodman all in one AC/ heat unit. Sets outside. Duct in duct out. Less than 10k to heat and cool. I’ve worked inside garages where your wrenches stick to your hands.

@LiteBrite

Жыл бұрын

This heater heats the shop to 90 when it’s below freezing out within 10 minutes. No ac needed in the summer. It’s nice and cool here

@brianbennett6978

Жыл бұрын

@@LiteBrite my garage is heated and air conditioned. It’s nice. Just full of too much junk. lol.

In a perfect world you could redo the floor and put radiant heat in but that’s a lot of work. You probably should put a heating system in considering how much time you spend in there.

Been thinking of doing an LJ if I can find a decent one to begin with that isn’t to expensive ( yeah right I know lol) it would be nothing like what you two are doing though, great job and video, look forward to the rest of the build.

the pants thing was hilarious. In all seriousness though...i hope whatever it is you're wearing is a natural fabric like cotton or wool so that if a piece of molten metal ends up in your lap you won't have ER nurses scraping melted nylon/polyester/spandex out of a third degree burn.

Pantless welding , funny . Come on , buy a real heater for that shop ! Fans also .

Wow, somebody actually thought you were naked welding? Haha osha violation 😂😂😂

Be sure to use some ventilation with your new heater. FF Kevin should know that.

Great team with Bec and Chris in the shop. Great fab skills and welding Chris! Bec, where did you learn to weld and how long have you been doing it? Those were nice beads! Great talent to have! Very cool video Folks! Stay Cool!!! Stay Safe!!!

Im just wondering if anyone thought of getting some good security cameras in the shop to catch Chris when he forgets to record on those nights when people leave him alone.

Maybe open th' garage door, behind th' heater, 'bout 9 inches for ventilation...

The LJ needs to be a priority. Are yall racing KOH?

@LiteBrite

Жыл бұрын

We’ll be at KOH, but not racing this year

Lol. I am an analyst by trade and we have a legacy program that no longer works that I had to recently redesign. Someone in 1980s wrote in programming code "must wear pants" so it appears on splash screen when you started the program. I thought it was korny as hell but tradition must go on and I wrote that into my model when I programmed it this year. #gottawearpants To Kevin: Might want to look at Mini Split HVAC systems. Quiet. Energy efficient. Good for recording things in the shop because you can't hear them.

Love all the projects you guys work on! Question for Bec...I'm no a welder but was wondering why the sunglasses under the welding helmet? Extra protection or helps seeing the welds? Thanks!

👍❤️ #Jellynation

Hey you guys may know this but don’t try to paint full vehicles with automotive paint and that diesel heater going. That will cause fisheyes in the paint regardless of where the heat is located at. The heater gives off tiny particles of diesel that stick in the paint causing the fisheyes.

It's gotta be driving Bec crazy not having her Jeep to drive.

@Kevin If you plan to stay at this shop location, why not put in a forced air furnace or radiant heating, it would keep the shop from heat Cycling and will cut down of temperature spikes from the heater being off over night. It really isn't that expensive to Install forced air heat.

@LiteBrite

Жыл бұрын

This works for now and the shop is insulated. It warms up in 10 minutes and stays warm

Love your craftsmanship. Uneducated question here, why were you not able to just put the rod ends on the bottom of the knuckle instead of the top?

Bec & Chris So Dam Happy you Two Are Back. Need to learn More on Bec Jeep. Chris can you help? What is your Take on buying A 2018 Wag. That is a water/flood vehicle ? Thanks see you later.

be careful because your " jet engine " heater is making CO . (Carbon Monoxide)

when you are welding are you making circles are figure 8? your welds look great. And my welds look like ?

I have not seen any recent videos on this build. How far along are you with it and when was the last video posted?

HAHA get ready to smell like kerosene 🤣🤣🤣🤣😂😂😂

is it a 2nd gen axle? do you have to keep the single piston front brakes and unit bearing/wheel studs pressed through the brake rotors?

Still nothing on the B5 S4?

What is the size/working area of y’all’s shop?

Shopmate might like you pants-less! 😂😂 funny story though.