The first 1000 people who click the link will get 2 free months of Skillshare Premium: skl.sh/thelazyeyebrow . If you're looking for the 4k version with the original frame rate, click here! kzread.info/dash/bejne/lJaFrtttqprNoJM.html

@Cedrickr

4 жыл бұрын

good on you for getting some of that sweet sweet sponsorship money!

@MrDEMarq

4 жыл бұрын

I find the S.I.E.G.E Hot-Link Seekers are great for background extras, since in the season one and two of the G1 series there were nameless purple seekers used in the background to which Hot-Link was design off of.

@kingcheerio8558

4 жыл бұрын

I'm ecstatic to see you've got new reviews, especially since the last video I remember watching of yours was your farewell to KZread, lol

@popoutstudios5227

4 жыл бұрын

Studio series bumblebee movie optimus prime doesn't really match to its final design we saw at the end of the movie, it actually resembles the the cab truck in age of extinction before he chose the semi truck, the one we got after the movie was different

@ZstackZip

4 жыл бұрын

MrDEMarq I wanted to use hotlink as a skywarp since siege warpy has completely phased out of existence, but hotlink is sold out almost everywhere, and ridiculously expensive everywhere else

"I'm not going to spend hours designing mudflaps that I'm just going to parts-form off every time I transform it" literally puts them in on the next shot

@574guy

4 жыл бұрын

I was about to mention that omg

@Spartan-Primer

4 жыл бұрын

I thought that was a self-targeted jab at the fact yes, he *is* obsessed enough to do what he just said he wouldn't do.

@ssgusa

3 жыл бұрын

They’re nice, wish mine had mud flaps. ;)

@Kian.sears.

3 жыл бұрын

Lol I noticed that too

@_V.Va_

3 жыл бұрын

“I’m also not NOT going to do it!”

Prime: Did anyone burn up? Wheeljack: Just Huffer Prime: Then today truly has been a great day

@megatron2171

4 жыл бұрын

If huffer survive , he will be complaining about it

@Toon_Lucario

4 жыл бұрын

Maybe that’s why he complains all the time, he has burns all over him

@Kian.sears.

3 жыл бұрын

Finally huffer is dead it's what the world needs there will NOT be a moment of silence!

@aryavs430

3 жыл бұрын

Ironhide: Am I a joke to you?

@inflatabledisplays1312

2 жыл бұрын

Well that exsplain a why huffed wasn’t in bay verse

“Every Optimus Prime Without A Bulky Truck Bed” - G1 He speaks the truth.

@NexusProductions-rz1sv

4 жыл бұрын

Well if you don't count 3P or movie figures.

@TheLazyEyebrow

4 жыл бұрын

I was talking strictly cab overs. Most long nose versions of prime have very clean backs

@snekles6449

4 жыл бұрын

but what about siege optimus, earthrise optimus(hes been out for awhile before this was posted so im counting it), evasion mode optimus, mp-44 aint that bad, mp 10 is clean (albeit a bit to THICC) and im assuming were not counting 3rd party but most 3rd party primes are pretty clean, even the 06 classics figures are pretty clean. Personally i think the beds of past primes have been the least of their problems. But you probably are right about it being the thinnest and best at hiding the feet.

@Qwertyuiop-lg7ko

4 жыл бұрын

One reviewer even Made a video complaining to me because I said him that the small truck bed wasnt a bad thing and It was even More accurate to a real vehicule And used the argument that It was based in the G1 optimus and It should had the bulky truck bed, A pity that I did not know the original toy

@TheLazyEyebrow

4 жыл бұрын

@@snekles6449 haha not clean, bulky. some of those are pretty clean, but in return are stupid bulky out of necessity

I’m so glad that the bumblebee movie is a reboot, that way we can get more of g1 styled Optimus Prime

@youtuber9566

Жыл бұрын

I hope they give us a g1 styled Megatron.

@ventris425productions5

23 күн бұрын

@@youtuber9566oh boy have I got a figure for you

I'd like to see a cybertronian trailer for seige prime. Maybe even one that could got UW roller.

@NexusProductions-rz1sv

4 жыл бұрын

There is a 3P Siege trailer ghosting around the internet.

This figure is a beautiful blend of G1 and modern design

@Bokobling

2 жыл бұрын

G1 is modern

@tfan2222

2 жыл бұрын

@@Bokobling When he refers to moderne design, I do not believe he’s referring to what you believe he is.

@Bokobling

2 жыл бұрын

@@tfan2222 what then

@evilbanana0718

2 жыл бұрын

This is what the bayverse should have been

@Stigums

Жыл бұрын

@@evilbanana0718 I like it but it would not have works with the darker aesthetic bay was going for

3:50 that drift and cliffjumper 😍. And why is warpath’ head down

@TheLazyEyebrow

4 жыл бұрын

In the middle of replacing the head with a more Toon Accurate one

@optimistprime3192

4 жыл бұрын

Is it just me, or does he look like a red Gobots Destroyer without his head?

@Tfpforever

4 жыл бұрын

The Lazy Eyebrow oh ok

@TyphonMar

4 жыл бұрын

I was wondering the same thing lol. Glad you got an answer

i respect that you did mudflaps anyway

And just to add to the fun, for a few bucks more than the actual figure you can get a couple of oversized KO's of SS38 with added diecast/details/light up eyes and swappable/articulated hands - depending on the one you get.

@octobotimus

4 жыл бұрын

I mean, if you get the modified one it’s a lot more than a few bucks. It’s around three of these.

@garyphillips3406

4 жыл бұрын

@@octobotimus I guess prices have changed since I got mine last year. My Hasbro SS38 was £45 and the Wei Jiang KO was £49 from ebay, for something double the size.

I died at "Remember the brakes!?" Edit: nvm, i was dying throughout the entire video

I love it how he says he wasn't going to make a mud flaps and proceeds to make them.

Well, darn... I passed on this last year, but seeing it in motion now I feel like maybe I need to see if I can still pick one up for a reasonable price.

@lukewarnke5377

4 жыл бұрын

Good luck, he's been expensive

That was the funniest Transformers related skit I have seen in a while outside of secret Transformer show. The Earth insect. Hilarious! Thank you for keeping at it I hope that you and your family are doing well.

@Croftice1

Жыл бұрын

I'm not so sure that Bumblebee is actually honey making insect, but hey, what do the English speaking space robots know about Earth insects anyway? Also if going by the Bumblebee movie, it wasn't Bee himself, who picked up that name, Charlie did for him, but yea, he liked it, so anyway.

Eyebrow I’m not going to spend 4 hours 3D printing mud flaps Ads mud flaps any way

If only he had blue fists, lolz. Beautiful figure, tho. Also, in some of the IDW TF Comics, he appeared in a form similar to this.

@NightmareZerogbs

4 жыл бұрын

Actually he doesn't have blue fists, not fully, I don't remember if he had a black palm and blue fingers or the other way around, but there IS black on his hands

@madteo7248

4 жыл бұрын

They did release a anniversary edition that had more g1 like colors

@GojirajJr

3 жыл бұрын

@@NightmareZerogbs He had black fingers while the back of his hands were blue

3:33 the return of breaks

I think this figure was based off the concept design of the character. Which was different from the design in the movie. That is why this figure has a different truck from the rest of the movie.

@JohnWilliams-wl9px

4 жыл бұрын

Very likely Bumblebee some artwork for other media has Bee with door wings which he doesn’t have in the final film.

Hands down the smoothest and most satisfying animation I have ever witnessed. This video needs a review of its own

@TheLazyEyebrow

4 жыл бұрын

Thank DAIN. I did the groundwork, the program interpolates it haha

I normally hate the product placement from sponsors in youtube videos, but you made it fit SOOO well. "The transformers will return after these short messages" and we cut to actual ads about skillshare haha, it really feels like I'm sitting here watching an old tv show. Love the creativity man!

"im not that ovbsessive with my vehicle modes" he says right before cutting to show the truck with some mudflaps (not that idiot from rotf)

@nightlypiano4116

4 жыл бұрын

*insert brakes rant here*

@TheLazyEyebrow

4 жыл бұрын

I really did spend an hour designing a mudflap apparetus and another hour printing, and then having to redesign that test and reprint it haha

@matthewboyer7401

2 жыл бұрын

Pretty sure that's the joke.

"I dunno what happened to Transformers lately, but I am LOVING EVERY SECOND OF IT!" Michael Bay left. That's what happened.

@ThrowerOfDogs

4 жыл бұрын

Is every body in the comments a Michael Bay hater?

@ironthanos2190

4 жыл бұрын

YOU JUST ANSWERED YOUR OWN QUESTION

@SamaritanPrime

4 жыл бұрын

@@ThrowerOfDogs He's not getting much love from Transformers fans, that's for sure. Dude made five spectacles filled with sound and fury. There's no substance there, no heart, no care about just what it was he was doing.

@TheLazyEyebrow

4 жыл бұрын

@@ThrowerOfDogs His first movie was great, it was when he made it 4 more times that everyone got a little tired the differences between movies can be summed up as CW Dead End CW Streetwise CW Dust Up TR Chrome Dome sure there's differences that make each figure slightly unique, but it's generally the same thing repackaged

@johnrussell9901

3 жыл бұрын

@@ThrowerOfDogs Everyone here seems to have major nostalgia boners for a 35 year old cartoon so it's not surprising.

I can’t find this figure for the life of me. And I want this thing for the details and stuff like that. I also need an optimus for my collection

@Bobert2020

4 жыл бұрын

Well, we meat again, you dirty FORK!!! GLORY TO THE NATION OF SPOONS!!!

Amazing how much thought went into this Optimus figure, considering all the the five minutes he was on screen, while the triple changer antagonists had character designs that made triple change toys physically impossible.

@dominicballinger6536

Жыл бұрын

Is that why we never had a truly triple changing drift figure?

While I've already wanted this figure for a while now, you've just made me want him even more.

I got this figure as a Christmas gift from my grandparents. Best Optimus Figure I ever own.

This is one of the best toy reviews I've seen in a while. Everything is organized neatly, advertisement implementation is great, and the review itself is in-depth. It truly shows how much work and care you put into these videos.

@TheLazyEyebrow

4 жыл бұрын

Thanks 😁

"Old friend, you keep the planet safe. Because of you we have a future, B-127" - Optimus in the Bumblebee movie

@frankforttheorangee2produc110

2 ай бұрын

Just be glad that Peter Cullen voiced him in said movie.

The Earthrise Optimus just hangs out there. I hope that *IS* the review 113

@TheLazyEyebrow

4 жыл бұрын

I aim to please haha

@TheAutisticOwl

4 жыл бұрын

@@TheLazyEyebrow kzread.info/dash/bejne/hZl72ZeKqbuegdI.html

@TheLazyEyebrow

4 жыл бұрын

@@TheAutisticOwl ............what the HECK did i just see with my very own eyeballs?

@TheAutisticOwl

4 жыл бұрын

@@TheLazyEyebrow Oh yeah, I forgot say "skip to 0:25 on this one". As for the question: a scene from the anime "Jojo's Bizarre Adventures".

We don’t deserve your effort in these stop motion scenes. Just fantastic!

I really love the Studio Series take on Prime's gun, it looks like a powerful smei-auto canon that will pump lead into Decepticons and shred them into scrap all while flinging casings out the sides

I think my favorite part was when you went on about how you didn't in fact spend ages making mudflaps, and then in the next shot the supposedly nonexistent mudflaps are applied and I bust out laughing

I'm not going to do it, next scene we see mudflaps.

Holy shit the animation is incredible! You need more subscribers dude!

It's like 4 in the morning but I love reviews

Oh my god, this is some of the smoothest stop motion I’ve seen in my life

@matthewboyer7401

2 жыл бұрын

You know what that means - lots and lots of photos

2:00 this is exactly why I love this channel, never change lazy

Achievement unlocked: Sponsorship (Congrats, I cant think of any other KZreadr more deserving of this than my favorite toy reviewer)

@TheLazyEyebrow

4 жыл бұрын

I was blown away myself. super excited it happened haha

@TheLazyEyebrow

4 жыл бұрын

dang it, I should've done some parody highlighting the fact i just got sponsored. like when Samus or link get an item

I always parts form off the arm kibble, and it honestly makes the figure so much better

the only thing I don't really love about that figure (and design by an extent) is the head, it's good but not as sharp as it could have been. fortunately the ball joint is The same size as the siege galaxy optimus base robot, which is the best prime head I've seen since the mp 10 one

That transformation! Sooo clean

i think the studio series bb figures (at least, after the first three shaky deluxes) are some of the all-time best transformers, especially at retail prices. they’re just so fun and they look great

7:36 - Ooooh, that is slick! Good use of the fancy new software you're using. lol "And quite honestly, I think this is what everybody was sort of expecting in 2007." YES!!! ALL THE YES!!!! Oh my god, so many forum post and youtube comments like "Making them look just like the toys would be stupid!!!!" Yes. Yes it would. That's why we give them THIS kind of treatment, where they look enough like their original counterparts to be immediately recognizable and hit you right in the nostalgia, but also with enough detail to look like they're real robots instead of just blown-up toys. Was this REALLY so impossible to achieve?!

@TheLazyEyebrow

4 жыл бұрын

can't be done. it's out of the realm of possibility don't you know

@TheLazyEyebrow

4 жыл бұрын

as for the software, you shoud've seen it do the size comparisons. I forgot to leave it in, but one of the shots is Bee morphing into dropkick and it was like....whoa!

I actually have figure, it's the best figure in my collection.

I just realized something, granted this isn’t about the review, as great as the review was! It’s just a detail I caught… g1 primes blaster is held past the trigger, so is evasion mode primes gun. They were making the reference to the toy, even down to the gun back in 2013!!!!

FINALLY, A REVIEWER WHO GETS TRUCKS!

If you want to go the cheap route you could use that beginner airbrush kit from testors they sell them at hobby lobby or 3d print a holder and use a compressor with some gundam markers

I love how smooth this looks! Can’t wait to see more!

Love your work. Honestly you are one of the best reviewers around. Studio series barricades arms can be made smaller. You left them fully extended. Looks far better with them retracted. Also i recommend a pinch of silver on the faux windows. And black on the clear forarms.

“Like; come on guys, I’m not THAT obsessive of my vehicle modes.” (Says the one who puts moulded mud flaps o the truck mode in the very next shot of the video)

I love looking at this guy next to my g1 magnus and marveling at how far we’ve come

It took a spinoff and four movies to get right

I wouldn't know it's Optimus Prime because the torso has no Autobot logo but that has the best articulation I've seen

Dude! The animation is soooo smooth! I absolutely loved the part where WFC Prime’s gun was stolen one year old, then he just rolled out with the original sound effects!!! I’ll be watching more of these moving forward!

@TheLazyEyebrow

4 жыл бұрын

Thanks 😁

I have lost track of your channel for so long and I finally rediscovered you and I see the bump of stop motion quality. Its amazing

From the moment I saw this announced I was impressed, but when I actually GOT it...man, this is one of those figures that make you fall in love with franchise all over again, because it is so. Damn. GOOD. With our local currency losing value against the dollar, most figures I get nowadays are either second hand or I wait for sales, but this one...no, when I found it I knew it would fly off the shelves, I paid full price(around 35 dollars) and I don't regret it one bit.

Lazy eyebrow gets exited of real life detail on toy Neighbours yep he pulled out the camera again

when he said this is illegal me: THAT'S ILLEGAL

I will always adore those Stop Motion efforts you put in. Feels very nice watching

That was excellent. Hope you're recovering well.

Holy Moly, that production quality though. Seriously great job, fantastic review for a fantastic figure.

Great review! Your stop motion skills just getting better! I didn't get this figure, but I did get the AOYI black version to serve as my Nemesis Prime to my Earthrise Prime, and it's awesome!

@ 1:13 *"Meh. It's just Huffer. We'll be down in a bit."* LMMFAO! 🤣🤣🤣

Optimus Prime's vehicle mode is awesome and I love it 😀

The stop motion looks so smooth, awesome work!

"Listing to a 30 year old complain about so and so." Please im 19 and my parents wont let me collect anymore figures till i move out xD

they are doing earthrise hubcap! Cliffjumper has gone from being the bumblebee repaint to spawning his own!

The best review ever. The transformation edition was epic. Congratulations!!

I don't have to watch the full rant about the forth Transformers movie to say, I couldn't agree more! Yep, I agree with everything you said! It's about frak'n time we got a decent G1 Optimus Prime!!!!!

I also realized that if you flip out the gas tanks in robot mode and those things on his knees, his knee bend is even better!!! Not exactly 180°, but close enough.

your reviews are awesome, all the hardwork of the stopmotion is great, you are great, thanks

Optimus prime at 6:30 “your joking” Lol your so good

That is some incredibly smooth Animation dude! really impressive

We are living in a new golden age of Transformers toys, specifically one of (relatively) well priced ones, like I know there has been a price hike on Generations figures lately, but we're still getting really good figures, especially compared to the ridiculous prices of Masterpiece

@dunkanbulk14

4 жыл бұрын

considering the qc issues of current masterpieces, the prices of the CHUG line doesn't seem so bad

I have a knock off of this and it's still so good. Transformation is pretty complexe for it's size but still so simple you memorise after doing it once or twice.

I agree with you 100% . This mold is amazing !! Big part of me wishes this was "The Siege Optimus " ! I think he would have been perfect for that figure ! Awesome video once again . Very entertaining :) I gotta be careful when I watch your videos because you get me so excited for these figures I would end up buying everything thing you review !! Lol . Thanks again !

I kinda prefer the longer nose truck since it fits the robot in disguise more as it's more common in the real world but I still like the cab over design

I appreciate you tagging where the ad is so much that I actually watched it to help you out.

@TheLazyEyebrow

4 жыл бұрын

thanks!

HOLY SLAG, your stop-motion has improved SO MUCH! The animation in this review was so smooth and fluid, I was geeking out the entire time! And then you went into such a passionate and honest review of what is possibly one of the most highly engineered and faithfully detailed modern Transformers figures that honestly, I kinda want to start collecting these guys again (I'm surprised you didn't talk about the absolute chasm in the middle of the chassis, though). The animation, the sound effects, the humor, everything was so awesome about this review. I'm so glad I subscribed to your channel, Lazy, and I eagerly await what's next.

@TheLazyEyebrow

4 жыл бұрын

Thanks 😁 I briefly mentioned it as "it could use a crossbar or two, but I can live with it"

@dracosodozir7607

4 жыл бұрын

@@TheLazyEyebrow Oh, duh. Sorry, I probably didn't catch that part. My bad! XD

I kept searching for this figure for all of last year, and I couldn't find one. Honestly, maybe the universe is mocking me.

@TheLazyEyebrow

4 жыл бұрын

I stumbled on 1, and have only ever seen that copy ever show up anywhere

I love how you say you aren't going to make mud flaps and then in the next frame it has them

"We finally have Optimus Prime as we always wanted him" Speak for yourself, I'm still waiting for them to make him a firetruck.

@TheLazyEyebrow

2 жыл бұрын

Haha i meant a g1 prime within the movieverse

@HiperPivociarz

2 жыл бұрын

@@TheLazyEyebrow Could you imagine tho if like they rebooted the movieverse, and said 'We're finally making the designs more accurate", and the reveal comes and it's modernized Unicron Trilogy? People would lose their minds. G1 fans have it good. Miscellaneous fans nowadays can't even get a Bulkhead without them making him square and giving him a nose ;u; I kinda wish Legacy did the movie designs, cause I think they have great concepts that just should be simplified. The thing I love about the Bay movies is that they actually realize these creatures are robots, so they shouldn't be just confined to a human body type. Skipjack moves around like a jackhammer. Sideswipe has wheels for feet. Robots can be so many shapes an sizes, there's no reason they all have to look like us, right? When a human wants four arms, that's impossible to do with modern technology, but when a Cybertronian wants four arms, Wheeljack can do that in one afternoon.

@TheLazyEyebrow

2 жыл бұрын

@@HiperPivociarz You do have a point though, the movie verse was fantastic for it's design variety after the first movie

@HiperPivociarz

2 жыл бұрын

@@TheLazyEyebrow I especially like how Hightower is like this animalistic pet for the rest of the Constructicons. I feel making some of the characters like robot animals that also transform into cars would've added some variety. Like Digilaut's concept for Animated Rampage, where he's just a bulldog that guards the construction site.

Yeah! Premium quality of videos!

Finally someone notes the vehicule mode problem

LE: sees a cab rack Also LE: jUsT LoOk aT It!

For as G1-centric as this design is, I appreciate the small ways they do break the mold. What's that? No G1 Optimus toy since the original uses the real truck grill for his abs because it just doesn't look good? Well, let's just not bother with the grill abs! That way we can get a good-looking robot with no faux parts!

WOW, your animation methods have gotten smooth and seamless transitions.

Finally, an explanation for that B-string-of-digits name!

There is a ko upsize of This figure that moves the forearm panels to his shoulders giving it a more movie accurate look.

@TheLazyEyebrow

4 жыл бұрын

I just saw that haha. I love that even more, and a lot of what they did to change it up

I won't deny the amount of gushing here for this figure is valid. And yet I haven't even got this figure, but I will eventually.

the Optimus Prime @9:05 mark is the one i had as a kid in the early 80's, my first 2 were Trailblazer and Skywarp. then i got lucky and folks found Optimus SUPER CHEAP, even for the 80's and i was able to get him.....just not the trailer. man i miss those. lost them over the years to bad dealings and moving around alot. love that I'm able to enjoy through your videos

how is this possible the details is just insane like this is a masterpiece it's better than the masterpiece

6:28 in not that obsessive Litraly the next scene I see the mudflaps

I love how you use the transformation sound effect from the War for cybertron/Fall of Cybertron video games. That's my favorite version of the transformation noise

Just FYI; it isn't uncommon to see custom rims on long haul trucks here in the US. Matter of fact, the rear rims are a race car style that is actually out there for single tire trucks rather than the double rims you see on standard trucks which are usually just pressed steel rims

@TheLazyEyebrow

2 жыл бұрын

Huh, i did not know that. So what you're saying is that this is something, although rare, could be seen somewhere on the road

Bold of Jazz to laugh at Bumblebee while being named after earth music.

Hot Rod: THE NAME DASHBOARD HAS BEEN AVAILABLE FOR ASTROCYCLES! WHY DIDN'T YOU PICK THAT B127?

odds are he was planned to be a marmon and thats what he was based off of, but the film changed it partway through, like how all the 2018 bumblebee merchandise was based off of early concept art

While I might not like the cabover design for OP, the absolute dedication the design team gave to the alt mode almost makes me want to buy the figure

14:35 Ok, that looks frickin awesome!