Stop feedback/ Noise/ Humming sound using Noise Suppressor in pedal Chain and amp, NS2 Using Demo-2
Музыка
Hello Guitar Player, This is a pedal chain order diagram presentation of how to use a noise suppressor pedal to reduce the noise or feedback coming from all gain pedals. I thought the diagram presentation would help the guitar players to figure out the proper use of the Noise suppressor pedal using the send and return effect loop.
Table of content:
0:04 Option 1: Using Noise Suppressor when not using high gain pedal
2:53 Option 2: Using Noise Suppressor with high gain pedal without using the amp gain
5:31 Option 3: Using Noise Suppressor along with high gain pedal and the amp gain
8:06 Option 4: Using Noise Suppressor only with the amp gain.
Additionally, I have missed explaining the alternative of option 1 if you have "Send and Return" on Amp and no "Send and Return" on your noise suppressor. Please check the link below for the alternative way of option 1:
drive.google.com/file/d/1JrXy...
Пікірлер: 18
Much better sound audio . Thank you sir.
Thank you for these diagrams. FINALLY someone provided a practical visualization for those guitarist who use gain pedals before the amp input AND time-based effects in the amp effects loop. Not every pedal user runs the entire signal chain into the amp input.
Though the audio quality is a bit poor, your explanation, diagrams, and pacing were superb. Please continue educating people on gear!
Hi the position of your compressor looks good....many thanks
Simplest explanations I’ve seen yet. Thanks for the video ✌️
what if I am playing through two amplifiers and using an A/B BOX (amp selector foot switch) ? Does the input from the NS2 go to the output amp selector ?
Hello where to use EQ on option 2
If I have old school fuzz pedals like fuzz face and soul bender do I place those in the “clean sound/pitch” section? To my knowledge classic circuits don’t play well with gates and certain pedals.
@tonecraft5386
5 ай бұрын
there is no such rule on where you wanna place the pedal. I would say, place it in clean section where i mentioned or after and try to feel yourself where your sounds great. Follow your feeling. I know many guitarist using the fuzz face at the beginning and sounded very awesome.
Hi! Excellent video!!! Option 3 for me. My distortion pedal is REVV G3 (preamp pedal). Do i need to route it through the loop?
@tonecraft5386
Жыл бұрын
Hi, Thanks for watching my video. Yes, any dirt pedal, Placing in FX loop will perform better and could be controlled the noise better using any noise suppressor.
@ajayburra6958
2 ай бұрын
@@tonecraft5386- I got some questions on Analog set up and would love to know your thoughts on it. Any way to contact you?
@tonecraft5386
2 ай бұрын
@@ajayburra6958, hey bro, definitely would love to share any info I have. What part of the world are you from?
Hi, how to connect noise suppressor when you have a pre amp pedal and you will use this as your main amp. Pre amp pedal will be connected to return of the available amplifier. Thank you
@tonecraft5386
5 ай бұрын
My suggestion, Consider your pre amp pedal as the placement of the guitar amp i explained in the diagram and see how it is going to sound. Also remember that there are many purpose of using Pre amp pedal. Reason for my suggestion is correct only if you are using your pre amp pedal instead of using guitar amp.
Are you Nepalese bro? you’ve Nepalese Accent
@tonecraft5386
5 ай бұрын
You are very right bro. You must be good and detail listener. Bro Kata bata ho?
@aavas7178
5 ай бұрын
yeah i watched other videos too to be sure 😁 i live in sydney.. where about you?