I use a plain hose. Put the hose down in liquid as deep as possible. Put thumb over hose end. Pull out of liquid so that it is below the liquid level and release thumb. Should start the siphon with out issue. I use this method to siphon 5 gal. gas cans in to fuel tank of car, lawn mower, etc. Easy peasy.

@SurvivalOnPurpose

Жыл бұрын

OK, it took me a minute to visualize what you meant. Yep, that should work.

I've had one for nearly 10 years and now thanks to you I know how to use it. Thanks brian!

Hi Brian. I recently bought two each of the Ontario Marine Raider knives you recommended. One is for a friend for his birthday. One is for me. Thank you for the Intel. Love your content. Keep it up!

I can’t believe you didn’t know, I’ve been using them for five or six years now. You’re the greatest thing since sliced bread. Don’t bother with the one from Harbor freight, it’s worthless. The one you have is a good one.

@milleniumraz

11 ай бұрын

Agree! I have the Harbor Freight version and just tried to use it for the 1st time. The plastic hose has 2 permanent kinks in it from sitting in packaging and the metal pump mechanism is absolute junk. Couldn’t siphon even a drop of gas. Don’t waste your money on the Chinese garbage people!

Great review!! I picked up a 10 footer for my Gerry can while towing my trailer. Your right. The pour spouts of the can suck. So with this. I can keep the can in the back in my Taco, slip in safety siphon and put the other end of hose directly into tank. Brilliant!!! No lifting heavy can, no spilling fuel. It’s perfect.

I purchased a few of these about 10 years ago, and they came in handy for siphoning gas out of my lawnmower.

KEEP UP THE GOOD WORK BRIAN!!!!!

I've seen something similar, but they make it for changing your fish tank water.

I'm gonna get two, one for water, one for gas..thanks Bryan

Good review Brian , thanks for sharing , God bless !

@SurvivalOnPurpose

Жыл бұрын

Thanks for watching!

iI had the check valve fall off the hose when shaking to start siphon.... beware of that potential...

Never seen it before. Never heard of it. I'm getting 2 at least. Thanks.

I surely need this to siphon gas out of my f150 that's got a half tank & I need to to drop tank to fix pump .

Thanks for the helpful info!

@SurvivalOnPurpose

4 ай бұрын

Glad it was helpful!

Thats a cool siphon!

Bryan, what size of that device will have a hose that fits into a modern car's fuel fill hole? I'm more interested in getting gas out of a can and into my car than the other way around. I think that even if you could get the "pump" end of the device to go into the fill hole, it wouldn't be able to get down into the gas. There are screens in there to thwart thieves and check valves to keep fuel from running out if the car overturns, so the days of siphoning gas FROM a car are over. I want the biggest size that will fit into my tank and the website doesn't give that info. Thanks bro.

Amazing, I’ve never seen that either.🤔

I'm a year late, but I ordered one. I'm your neighbor down South and I've never seen one. I live near rugged suppressors. You need to come up and go view the Facility. Great suppressors, I own 3.

@SurvivalOnPurpose

Ай бұрын

I do indeed

Will it work if you switch ends in the liquid? I think I saw someone do it that way too. Just asking.

That's a first for me. I need one

Brian, let me tell you about the wheel. LOL

With a little coordinated thumb pneumatic check valving the tubing can become all you really need.

@SurvivalOnPurpose

Жыл бұрын

You lost me at "coordinated" ;-)

@WireWeHere

Жыл бұрын

Ah yes, I often leave a little puzzle, I'll explain. The fitting with the ball rattling around is just a check valve to only allow flow up and out from the liquid source. By moving the tubing up and down rapidly the check valve opens and closes as a little more fluid is pushed into the tubing with each downstroke. You can use your thumb on the outflow end to accomplish the same check flow function. Just remove your thumb during the downstroke and replace it on the tubing for the upstroke. The tubing will fill even quicker once you get your coordinated thumb-hand- arm timing perfected. Another method is to submerge as much tubing as possible, seal the outbound end, and lift. A partial vacuum forms which allows the liquid to be lifted with the tubing. Then just quickly lower the end you're sealing to below the liquid source level source and release the seal... A siphon will commence. Thanks for the reply. Please let me know if I'm leaving a clear enough picture behind. Actually I'll write a simple version shortly. Replacing our burst water main right at the moment. I'll be back.

@SurvivalOnPurpose

Жыл бұрын

Great explanation. I get it now.

Not sure why but I want one !!!

@felixmadison5736

Жыл бұрын

We fellow gas siphoners know why. LOL!!

You made me laugh when you told yourself to shut up, because I was thinking "he's a bit long winded" ...I fast forwarded to when you was ready to demo!!!! I had to subscribe after you said that to yourself! I like your channel name & the catch phrase!!!

@SurvivalOnPurpose

10 ай бұрын

Thanks

Should have one in every car and home.

Can you see it?

💥THAT'S PRETTY DARN COOL! 😎👍 I WONDER WHY I NEVER SAW THAT EITHER ALL THESE YEARS??🤔 I ALSO WONDER IF IT COULD WORK AS WELL AS A SUMP PUMP?

@SurvivalOnPurpose

Жыл бұрын

As long as the eventual outlet is lower than the water you are siphoning. Basically, once the water makes it over the high point in the hose it pulls the rear of the water down.

@MA-lq6eb

Жыл бұрын

@@SurvivalOnPurpose INTERESTING...Worth a Try!👍 Especially if there's NO POWER.

I got this exact hose....inserted into my cars gas cap....NOW IT IS STUCK!!!!!!!!! Anyone know how to get this out????

Sorry get to the point

@jerdenesutherland5024

2 ай бұрын

I totally agree with you. Take too long to get to the point

You read the instructions! Oh! :).

@SurvivalOnPurpose

Жыл бұрын

Yes I do!

Get to it ? 7 min waiting?

Enough forget !

It's a jiggle siphon

Those have been around for decades floating ball

This tube is the same principle as my fish tank siphon. It's nothing new!

I just brought one yesterday at Harbor Freight 1/2 inch for 5.00 dollars on sale, who cares about overpaying if is USA

Would you just look at that! 🤣

Does this work on cars

@SurvivalOnPurpose

8 ай бұрын

If you get one with a small enough hose to get down the gas tank fill tube

@tammysims8716

8 ай бұрын

@@SurvivalOnPurpose Thank you.

This does not work on a car

Yeah man we see ittttt ;)

Hose is too short

Ahhh, the simplest things in life.

Wait, you don't know how this works?

@SurvivalOnPurpose

4 ай бұрын

Of course I do. Magic ;-)

This thing has to be 15-20 years old

@SurvivalOnPurpose

Жыл бұрын

around 40

@dennismccolley1380

Жыл бұрын

@@SurvivalOnPurpose I can believe it. The one I had for so long the hose wouldn't bend anymore. I have a new one I do not use it often but it's a handy device. Never know when you might need it.

6 mins into a 9 mins video before he shows how to use the tube for 20s!

you wasted 9 minutes of my time when 30 seconds would be enough

Get to the point of video

Omg all this waisted time!!! 5:25 guys!! It almost got dark on him!! 😮

@SurvivalOnPurpose

2 ай бұрын

Joe Friday

To much talking just get on with it.