STIPPLING & BORDERS: HOW TO GUIDE FOR GLOCK FRAMES!
STIPPLING & BORDERS HOW TO GUIDE FOR GLOCK FRAMES This video will show you how to do grip modifications on your Glock frames from start to finish including how to cut borders and how to do a double undercut. I have provided affiliate links below for tools used in video and tools recommended to help out in the process.
**Disclaimer**-This should be performed by a licensed gunsmith and could damage the frame's structural integrity. DO AT YOUR OWN RISK.
TOOLS:
1. Weller WSB25WB 25-Watt Short Barrel Woodburning Kit
2. Dremel 8050-N/18 Micro Rotary Tool Kit with 18 Accessories
3. Dremel 9100-21 Forti-Flex 2.5-Amp Stationary Flex Shaft Precision Rotary Tool
4. Dremel 105 Engraving Cutter Bits I some times use for borders
5. Drilax™ 50 Pcs Professional Quality High Density Diamond Drill Bit Burr Set Grit 120 50pc -Seaglass Rocks Ceramics Tile Glass Porcelain Jewelry Making Lapidary Engraving for Rotary Tools 1/8 Inch Universal Shank - Plastic Storage Case 50 Pc
6. 3M 1400C ECONOMY TAPE WHITE Economy Vinyl Electrical Tape, White
7. 600 Wet-Or-Dry Sandpaper 5Pk
8. 800-Grit Sandpaper
9. VViViD Stainless Steel Precision Hook and Pick 4-Piece Tool Set
Пікірлер: 239
Best at home DIY stipple job I’ve seen on KZread. So clean and subtle.
I've just wanted to say congrats on your Stipple job. First DIY video I've seen where I haven't felt regret for the fellow who tried to stipple themselves. Looks great
Thanks for the border info that helps a lot and doesn’t get covered enough great work brother
You did a awesome job. As good as the best guys out there today. Keep up the good work.
very informative video bud. I have been watching many on YT and this is hands down the best one. Great work.
@rickygreen4669
4 жыл бұрын
Alfredo Anis Jr. A
The best stippling tutorial I ve seen. Great job, man!
@4thelulz8
5 жыл бұрын
Totally agree
@truthbtold9794
4 жыл бұрын
Thats what i was gonna say
@zachwilhite5344
4 жыл бұрын
Forsure, solid vid
@RattygamingTV
3 жыл бұрын
Hands down
Great job...I did my 43 a few weeks ago and it came out really nice. I like your borders. I think I am going to go back and do my borders like you did. I'm kind of telling myself to leave it alone because it really looks fine but I see something that could make it even better. Nice job..one of the best DIY I've seen on KZread...thanks Brother
looks good! when I do my undercut, I like to trace my finger on the gun, so I cut the exact shape. instead of straight across, its actually angled somewhat to the curvature of my finger. feels great
Best diy job I’ve seen man keep it up 🇺🇸
Bloody hell that is sweet. Especially helps us guys in South Africa out. Not many places to get a stipple job with limited options and insane prices. Thanks!
This is literally the best Stippling Tutorial on KZread!
Amazing! Your work is so clean. Wow!
Man U are patient and are good at Titus work ! Good video
Best stippling DIY finish I’ve seen so far. Only thing I didn’t necessarily “like” was that the second undercut was too square. It could’ve been grooved a bit but other than that, that was hella nice.
That turned out awesome. I'm gonna give this style a go on my 19x. Great vid man 👊
Look great bro. Thanks for the video. I will be doing a test run o a AR grip first a few times.
That came out amazing! I am going to do it myself and use your video. 👍🏼
Excellent! Very well done video man. I really need to step up my video sounds quality and editing.
Very nice work! Great job!
That's some damn good quality stippling there!
Great work! Thank you for posting rather than hide how it's done. May sound weird but I'm still trying to figure out how to make random stipple like that look good. Rather than a repeating pattern. I'm worried I'll have too many in a certain direction when done and look off.
A work of art,and love great job!
Excellent job. Professional results.
Good video, good music, and great skillz
Great video, I have had issues with polishing and buffing the polimer back to a nice shine after making cuts, I'll definitely try your way next!
Really great job .Thanks for the info!
Your a beast! That is an amazing stipple job you did yourself. You should start a glock customization service.
That turned out really good!🙌
Other guys make it look so damn difficult. Thanks for keeping it simple. Looks great btw.
great work. learning the art right now
Dude that’s nice!! Good job
Fantastic work ! Amazing result, it looks like laser stippling..
Nice PC, and best DIY stipple video I've seen!
@clayton5958
5 жыл бұрын
carl horvath thanks
that tip gave it a really nice look. Good video
Yes! Great video brother
Nice video. That Saints photo in the background 👌
Awesome job man! Great video!
Looking at doing this to my 19......great video! 🍻
Made it look easy bro.. good job
Awesome video one of the best ive seen. 🤙
That looks AMAZING!!!
Great vid, man!
I’m nervous to get into this trait, but then again I always feel like that when I attempt something that is new to me
Probably the best stippling pattern by hand I've ever seen.
dude, that looks sick!
Nice work ! Thanks.
Great video. Thanks.
Best I've seen so far
Nice job man, I like it👍
Pretty cool sprinkle pattern 👍🏻
Looks amazing.
Awesome job
sweet. really well done.
awesome work
I had no idea Adam Scott would be teaching me how to stipple a glock on KZread
Came out great
Best one I've seen!
Great work
Great job dude!
Nice job on that stippling.
that was a really good tutorial
Tip: I used a Dremel polish tip with a black waxed crayon on it to polish the undercut. It blends perfectly with the Glock original finish.
Very nice!
Great job. Best stippling on the last two little parts at the end. Most times I've seen it those were sloppy and angled.
Great video
great job!
Sweet. Looks cool.
Great job!
Now I see why getting this work done costs a lot. Great job. Hopefully I can do this when I get a Glock.
I see you're fan of Staind. That first song was like Its Been Awhile and Outside mashed together. Nice job, both with the stippling and music.
Good video 👍🏽
Good job bro.
The best stippling tutorial
@clayton5958
5 жыл бұрын
Matthieu Oustric thanks
Nice job Bro!
Hell of a job!
Nice job
Dat thang look good man...
Very cool
job well done
Awesome.
Clayton, thank you for this, i know you made the video a while ago, going to test trial on and old frame; i will have and see how i go, but i think i will slow all of your work down so i can follow along. I like the way you did your cut marks, any suggestions depth wise for both of the trigger undercuts and obviously this related to the size of someone hands and fingers.
Damn good job!!
Thank you
Quedó muy bien !!
Beautifull
Roll tide! Good job bro.
@clayton5958
5 жыл бұрын
Hayden Chrestman Thanks Roll Tide!
@charlesholland6851
5 жыл бұрын
Roll Tide!
Looks profesh!
watching this in 2020 and wow.. I want this on my gen 5 19..
Nice as hell
Sweet!
Dang bro . Looks good
@dennismaley2717
6 жыл бұрын
Good stuff man.
You're great on Parks and Rec
@Roberthuffalumper117
5 жыл бұрын
Kevin parks and rec?
Sweet.
Immaculate 🤌🏻
Wow best on KZread.. You could charge for that. Think I'll practice on some pmags for a while
@alonewolf9768
5 жыл бұрын
@Beaf Supreme umm lol some people have an artist ability I've personally seen some garbage stippling because they have never practiced. If you practice and try to find some junk Glock frames you will get better I've tried pmags and anything Magpul but their material is completely different to a Glock so it burns different. I finally just found some old unusable gen 3 frames and practiced on those.
that shit crazy looking
that looks sick i am thikning about stippling the grip on my kabar bk-2, it has a really strong polymer handle, and i like the shape but it is a little slippery.
Did anyone else fast forward after hitting 5:58, just to make sure he didn't stipple the whole gun with a candle?
Where did you get that wood burner tip? I love the design it makes. Thanks!
Great video. Why the double undercut on the trigger? Does it serve a purpose or just aesthetics?