Agree, seen my 362 with a 25" bar keep up with a 462 25" bar both with RS chains
@matthewotis3594
Жыл бұрын
Have the biggest motor you can hold and it won't cut shit with a full chain. I must agree with ya.
@dallaspeterson2024
Жыл бұрын
Sharp chain maximizes what cc you have, for sure, but there's no replacement for displacement !
@petermclaren72762 жыл бұрын
I have a bunch of saws. An 880, 660, 440, a ported 064, 038 magnum, 034 and a 241c. The saw I reach for first is the 241, with just a 14” bar it rips the full length, it’s so light it feels like a bread knife. It’s only when limbs or stems are larger than 14” I go up a saw. Chain sharpness is key.
@InTheWoodyard
2 жыл бұрын
Yup, sharp matters the most!
@llewmatthews4828
10 ай бұрын
Yeah i got that 241cm. Its the super thin chain that makes it fast. It just feels like a well made unit. Hard to describe. Feels better in my hands than a 261, sounds better too.
@adambatchelder41212 ай бұрын
#1 is always having a sharp chain , that means the skills to drop down and hand file in the field. Beyond that it's personal preference. I have several pro level saws and always grab my ported light bar 261 as it just light and powerful. I think after all the years of saw work I like saws on the slightly smaller side for the job at hand .
@InTheWoodyard
2 ай бұрын
For a long day in the woods the right size saw or one size smaller is nice but then again the bigger saw finishes first. I find that I am always the weak link not the saws!
@KNLFirewood2 жыл бұрын
Chris, thank you so much for letting me interrupt your busy day. I had a great time with you and Tony. Learned quite a bit too! Appreciate the youtube boost too! Until next time brother! Happy New Year!
@InTheWoodyard
2 жыл бұрын
Thank you for stopping in!
@nickwallace99552 жыл бұрын
I started out with cheap homeowner saws and when I bought my first pro saw I never looked back. If your gonna cut any amount of wood Pro level saws are the way to go!
@InTheWoodyard
2 жыл бұрын
Good call!
@barronkistler11962 жыл бұрын
I bought a ms661 r c m and loved the power and efficiency. I can handle big stuff and scream through little stuff. However it's a bit heavy so I also got a ms400c and it's perfect for the majority of what I cut.
@InTheWoodyard
2 жыл бұрын
Yup, the 400 is a nice size saw!
@chadhardin1890 Жыл бұрын
Great video. I have an MS 290 Farm Boss that is now 10 years old. Just used it all day cutting wood. Still runs like a brand new saw! Absolutely love it
@InTheWoodyard
Жыл бұрын
Nice!!
@ericoverdorff8880
Жыл бұрын
Like wise. I've cut well over 100 cords with my 290 and it runs just as strong as new. Although! My handle is wired together, the chain brake handle is gone, broken off, and a crack in the frame under your throttle hand, and the fuel tank leaks just a wee bit. I'm in the market for a blown 290 for a parts saw, if there is such a thing? But in the mean time I bought myself a brand new 400cm. I've owned it a few months now and haven't even started it yet. I'm looking forward to spring and getting out cutting again.
@cody28h2 жыл бұрын
I have a 562 XP nice and light I cut 100 bush cord last year or 300 face cord but after watching you Chris makes me want another saw so if one gets dull or runs out of gas I can swap and keep cutting
@thefirewooddoctor
2 жыл бұрын
I run three saws. Husqvarna 572xp and 550xp, plus the Echo CS-590. It is nice having three saws ready to go.
@InTheWoodyard
2 жыл бұрын
Yes! Get a 572 and switch back and forth to give them a break and to get more done!
@markhowes1262 жыл бұрын
If you cut much wood in the woods. I like a big saw for bucking and a lighter saw for limbing Particularly when reaching up for limbs. Love my 261 for limbing. Bucking on a log pile no need for smaller saw.
@InTheWoodyard
2 жыл бұрын
Yup, that sounds right!
@robertpepper27672 жыл бұрын
As for filling rackers the gauges I have used for 60 years are all hardened steel and I think they are designed to be placed on the saw blade and filed in place.This is a much more accurate way to do rackers and no room for error.
@InTheWoodyard
2 жыл бұрын
Yes but they do not take off as much as I like.
@robertpepper2767
2 жыл бұрын
@@InTheWoodyard but you don’t explain this is your choice not the norm. Justsayin
@bradwatters9962 жыл бұрын
I have my name on the list at the local shop to get a 400 and this video sold me on it. I dont sell firewood, i just cut for me. I dont even heat with wood, but i have about 4 full cords, or 12 face cords if you prefer 🤣 cut, split, and stacked. I want the 400 because my big saw at the moment is a 291 w a 20" bar, and i have 3 big oaks to cut up, and it will just be easier with a longer bar(25") and a more powerful saw. The 291 is a dog in big wood. Works great in 16" and under but not the big stuff.
@InTheWoodyard
2 жыл бұрын
For your application, very good choice!
@harveybrewer27512 жыл бұрын
I will keep my 372, 572 and 550xp MK 2 thank you. I use skip tooth chains on the big saws, and they cut very fast. Watch Donny Walker's channel for issues they are having with the 500i.
@thefirewooddoctor
2 жыл бұрын
No need for skip-tooth chain until you get into 28in or bigger wood. 24in wood full-comp is faster in 24in wood. Not by much, but is faster. 28in wood the two chain types cut at the same speed. Now in hard dry oak or locust the skip-tooth might be quicker in 24in wood.
@InTheWoodyard
2 жыл бұрын
Me to, but the 500 really cuts!
@timfunk5084
2 жыл бұрын
@@thefirewooddoctor True if you have small limbs skip tooth chain will pull them instead of cutting. Skip tooth maybe a little faster to sharpen.
@Juankysegnana3 ай бұрын
Muy buen vídeo, yo tambien afilo con la dremel y el kit de afilado para sierras. Y cuando estoy en el monte si uso el kit de afilado Stihl con la lima, solo para mantener el filo. Ya que con la dremel queda muy bueno el filo, mejor que con la lima.
@InTheWoodyard
3 ай бұрын
Thanks for watching!
@hk93shooter2 жыл бұрын
that 500 is a completely different beast. sounds different than a 462. got its own hollow tone. what a cutter.
@InTheWoodyard
2 жыл бұрын
Yes! It sure is!
@TheOMEGANOX
Жыл бұрын
Yep, unicorn. I keep mine on the shelf and only pull it out occasionally like a Sunday hotrod but when I do it makes me feel like a kid every damn time.
@botabob2 жыл бұрын
Chris, I have put brand new Stihl chains on my MS-291 and the saw did not cut good at all. I put the saw in my vise and got out my file and then the saw would make nice long chips. I agree, the factory chain is good enough to get it out of the store - I am not good a chain sharpening but I have learned from KZread and various channels to improve the skill - it takes time and understanding to improve - enjoy the journey - cheers
@InTheWoodyard
2 жыл бұрын
Yes, you can get them sharper for sure! Thanks for watching Bob!
@dentondunn4346
2 жыл бұрын
Go buy the Stihl 2 in 1 file, it works and makes it easy
@scottfoster2487 Жыл бұрын
Chain makes a big differnece for sure. a 50-60 cc saw 20-24 inch bar and 70cc saw with 28-32 cc makes a great firewood duo.Never hurts to buy the most cc you can when buying a saw.
@InTheWoodyard
Жыл бұрын
Yup, I like the 70 cc size best.
@aldredske61972 жыл бұрын
Good morning Chris!! Both of those saws are really sweet!! I really don't think either one of them are broken in yet. Especially Mike's 400. You definitely could have taken the rakers down a couple more strokes. Neither saw was working very hard. But you don't want to make them too aggressive for their rookie owners. Both of the saws need another 5 gallons of fuel put through them and they will really start to wake up. Nice comparison Chris!!😀😀👍👍 Take care my friend!! TTYL!! Logger Al
@InTheWoodyard
2 жыл бұрын
I agree with that for sure!
@dethmaul
2 жыл бұрын
They take more breaking in than ten minutes? My friend told me to let my new saw warm up on the ground for 5 minutes idling, gently cut maybe 30 forearm sized branches at half-throttle, then it's done. Ready to rip. Broke in.
@aldredske6197
2 жыл бұрын
@@dethmaul not even close. Most of my new saws took 30 to 40 hours for them to really be broken in all the way and depending on the saw sometimes even more.
@truckguy6.7
2 жыл бұрын
@@aldredske6197 Just for clarification? Broken in as not having full power? Or broken in and you shouldn't run it at full throttle yet?
@aldredske6197
2 жыл бұрын
@@truckguy6.7 not having full power.
@rodt27812 жыл бұрын
Great video. I'll still say if you ever consider getting a 60cc saw make sure to try a husky 562xp before buying. You can use same bars and chains on 562xp as your 572xp and 576xp. Myself I own both husky and stihl and love both. And yes the 500i is a screamer but air filtration could be alot better. Seems like my 500i I clean steady but my 562xp and 572xpg I hardly have to clean.
@InTheWoodyard
2 жыл бұрын
I have run a 562 and I would much rather run a 572
@heily-3806
Жыл бұрын
Nothing worse than a husky fanboy! if you love huskies then why aren’t you watching a husky video?
@rodt2781
Жыл бұрын
@@heily-3806 I run both husky and stihl pro saws and both are great, but both feel different to. Husky has fatter handlebar and trigger handle which I find grippier and nicer to make notches and back cuts, but husky heavier when limbing. Stihl are lighter and much nicer for limbing for that reason. But as far as power goes both have loads of power and both cut fast.
@oldguyfirewood2 жыл бұрын
Another great video! You are totally correct that each cutter doesn’t have to be the same length. However, the raker on a short cutter needs to also be shorter than the rakers on the longer cutters. If you have a short cutter be sure to use your depth gauge on that one to get it right.
@InTheWoodyard
2 жыл бұрын
Yes, the depth gauge matters!
@ericoverdorff8880
Жыл бұрын
I never use a depth gauge,, just tap each raker with my angle grinder every few sharpening's.. once in awhile I get them a bit low and the chain gets a bit grabby, but keep the revs up and it cuts like nobody's business.
@lukester478
11 ай бұрын
Stop jackhammering your wood, get a gauge
@danshouseofsmokeandoutdoor71192 жыл бұрын
I haven’t tested it but I believe my 372 will cut with my 395 in small wood. After you get above 12 inches the 395 definitely faster. The downside is I can cut all day with the 372. The 395 on the other hand wears me out. Great video nothing wrong with the white saws other then for the price of that 500 i you can get 1 and a half 372.
@InTheWoodyard
2 жыл бұрын
Great point! I agree!
@Harriet_TubgirlАй бұрын
Dam I’m 31 out here complaining the 25in rolomatic es bar is too heavy for that saw and shopping for a light bar but this old man is out here ripping the thing.
@InTheWoodyard
Ай бұрын
I am exactly twice as old as you! You can do whatever you want to if you want it bad enough!
@mikedonaldson18202 жыл бұрын
Others may have said it already. But I have found the stihl green link "safety" chain cuts alot less aggressively than the standard yellow link chain. I am also not big fan of the 2 in 1. When I am on my filing game I can tell a noticeable difference between hand filed and the 2 in 1.
@InTheWoodyard
2 жыл бұрын
Safety chain suck.
@thehustleandhobby8694
2 жыл бұрын
The green chain is normally for home owner saws or people with less experience
@6900pilot
2 жыл бұрын
I found the 2 in 1 filed the rakers more on one side than the other. I switched to the stihl file with the guide and a separate gauge and file for the rakers, takes longer but better job.
@mjmtreeservicemaintenance29402 жыл бұрын
Haven't ran the 400 yet. At the moment I have no need for one. When I have to replace my 362 I may do so with the 400. When it comes to the 500i, I personally like my 462 better than the 500i.
@InTheWoodyard
2 жыл бұрын
I have heard that the 462 and the 500 are very similar.
@timtorkelson7201
Жыл бұрын
Like Buckin Billy Ray mentioned " I think the 500I has a problem it's the 462" 😂
@davidedwards37342 жыл бұрын
Nice comparison of the 400 and 500. Once you sharpened they cut better. Have a Safe Day
@InTheWoodyard
2 жыл бұрын
Thanks David!
@Morpheen9992 жыл бұрын
I would love to run the 400 and see how it compares to my 362.. I just traded my 461 in for the 500i a couple weeks ago.. and wow!! more power, less weight & a little easier starting I really really like the 500i
@InTheWoodyard
2 жыл бұрын
Good choice!The 400 is much slower, the 500 is a screamer!
@travisteeter5072
2 жыл бұрын
Love my 361 which has been the best saw ever for the past 15 yrs, now owning a 500i has made it the redheaded step child
@timtorkelson7201
Жыл бұрын
Love my 462cm!! To me Joe firewood cutter it's a beast!
@montanawildman8600
10 ай бұрын
Hi there just started working for a whole new tree service company, and this new outfit has so many variety of brand and sizes of saws, I fall timber myself and sharpen chains very good, I got to test our saws all out and the stihl 400 is so much better than a 362! Big difference, those 400 are amazing fast and light also, 362 is weak, 500i are amazing, super fast and strong torque, I do know a 400 with either 20 or a 25 inch bar is awesome
@daveyboy6985
2 ай бұрын
@@montanawildman8600do they have any 462's? And if they do, whats your opinion between the 500i and a 462?
@cisco5400 Жыл бұрын
Looks great. I would use a nylon net so wood drops down into the net when you cut them. Hard to get net under a pile of wood but if you place net close below you can get some there and use tools to lift or pull wood on to the net.
@InTheWoodyard
Жыл бұрын
Maybe so!
@oakrunacres25642 жыл бұрын
I have a Stihl MS462c and MS400c. I had a MS362c and a MS261c but I found them both to be way to slow compared to the MS462c and never wanted to use them. The MS400c is not quite as fast as the MS462c but close enough that when I use it I'm not missing the extra speed/power of the MS462c that much. I've been thinking about getting a MS661c but it really is more saw than I need and I'm concerned about the weight. I'm also considering a MS500i but I'm not sure if it's that much faster than the MS462c for the money. Dave
@markhowes126
2 жыл бұрын
My son has a 661c. Used it the other day told him I would give up cutting if I had to run it all day. I dropped a big pine with it. Bucked logs (5 12 footers) then drove tractor a quarter mile to trade back to my 261 to limb it. Big saws are great bucking and felling but a man killer limbing!
@oakrunacres2564
2 жыл бұрын
@@markhowes126 I don't do much limbing because 99% of what I cut right now is dead standing or fallen ash. I do get into doing a bit of clearing to make trails to get to the wood and even the 462 is a work out for that. I don't mind a heavier saw and longer bar for bucking and I usually only cut for a few hours per day so maybe the extra weight of a 661 won't be an issue...for a few more years anyway. Dave
@InTheWoodyard
2 жыл бұрын
That is what I have heard too.
@InTheWoodyard
2 жыл бұрын
YES! You are right about that!
@InTheWoodyard
2 жыл бұрын
Yes, I like speed too, get done faster!
@Mightycaptain6 ай бұрын
That 500 is 1600+ now. Hell of an increase in just a year or so.
@InTheWoodyard
6 ай бұрын
Yup, and food costs are up 30-40% for everyone!
@Mightycaptain
6 ай бұрын
@@InTheWoodyard meanwhile most every large conglomerate corp is raking in records profits every quarter since they started the hikes. Artificial inflation. Stihl is no exception. I haven't gotten a 30 to 40% increase in salary the last 2 years to go with it.
@gabrielklassen90432 жыл бұрын
I run a ms 260 and I love it for the fact that it's light and felling trees 🌳
@InTheWoodyard
2 жыл бұрын
Yes they are good saws!
@deliverybryan11382 жыл бұрын
I just picked up a MS 400c and can’t wait to get it in some wood soon !
@InTheWoodyard
2 жыл бұрын
Nice! That is a great all around saw!
@deliverybryan1138
2 жыл бұрын
@@InTheWoodyard thanks brother !
@joshsweet53732 жыл бұрын
You can tell who has the most experience of you all here I love them saws
@InTheWoodyard
2 жыл бұрын
They are nice saws!
@jandblawncare85702 жыл бұрын
That sharpening seem to make a bit of a difference! I'm surprised his 2 n 1 didnt do a good job, I use a 2 n 1 from the company that makes them for Sthil and it gets my chains cat claw sharp and rakers down. I love mine, I can do my Echo CS 620P with a 24" bar in just a minute or two. My favorite saws are my climbing saw, I have a CS 303T and a CS 355T both Echo and tuned up, both have 14" bars but are light as hell. Love the honest comparisons!
@InTheWoodyard
2 жыл бұрын
The best saws are the ones that are sharp and run!
@scottrush8150
Жыл бұрын
Y666y6y
@johndeere43002 жыл бұрын
I have a MS261C it's definitely a Beast with an 18" bar!! It definitely cuts scary fast through small and medium logs and it has lots of low end torque as well. Best investment I've made in the last 2 years hands down!!
@InTheWoodyard
2 жыл бұрын
Yup, that is a nice saw!
@marcbaker0650
2 жыл бұрын
Run a 500i or any big saw and you will be blown away then. I have a 261 also but it is a child’s toy compared to a my 500 or 660.
@johndeere4300
2 жыл бұрын
@@marcbaker0650 I also have a 2007 MS441 with a 20" bar and Stihl yellow chain. It has much more power and torque than my MS261 but for what I bought the 261 for it does an incredible job! I really want to try out the new MS400C someday it would probably cut more like my 441 with less torque of course
@benvasilinda9729
Жыл бұрын
Yea I use the 18” bar while up in the trees when they are to big for my 16” on the 201 but I keep 20” bars for the ones on the ground. 261 weight to power ratio makes it one of the best saws to use. The 500 is great and my buddy’s love them but I just stick with my 661 when cutting stuff big enough for those saws.
@JeffGeorgalas
Жыл бұрын
The 261 (which I have two of) IS NOT a "beast". If a person thinks that a 50cc saw is a beast, they don't know saws. People use that term "it's a beast" entirely too often.
@nvrdwn31402 жыл бұрын
A 661 and a 400 is a perfect combo imo
@InTheWoodyard
2 жыл бұрын
nice choice!
@larryvankirk74232 жыл бұрын
Nice video Chris. I've said it before but you are still the best I've ever seen with the front 1/3 of the bar. Time will be the real test for the pretty Stihls that don't even have the paint wore off the bars. GNI
@InTheWoodyard
2 жыл бұрын
Thanks Larry, yup, they need to be broke in!
@mottmusic1012 жыл бұрын
Wow, what a difference in the 400 after Chris touched it up. Fun as usual but graduate-level training on filing and raker height. Gonna dig out my dremel and suit it up for filing. That Tony is a hoot!
@InTheWoodyard
2 жыл бұрын
Yup, all saws that are sharp and run well are nice to work with!
@jenky10442 жыл бұрын
Great show. Very informative. Thank you. Over the years I've had people ask to borrow my saw and when I handed it to them I would tell them that the rakers had been filed down. If they asked "what are rakers".? I would tell them what they are for, but I also would put a different chain on (like a factory one that hadn't had touched up rakers) there was always a couple of those around that I didn't care about.
@InTheWoodyard
2 жыл бұрын
That was a mistake, handing someone a saw is like handing them a loaded gun!! I bet they can back dull as a bowling ball! HA!
@jenky1044
2 жыл бұрын
@@InTheWoodyard Yeah, if I remember correctly, that was the only time he used my saw. I think he used it for roto tiller or something.?
@thefirewooddoctor2 жыл бұрын
In really fast cutting wood like basswood or pine, especially smaller logs, I prefer my Echo CS-590 over my 572xp. The 572xp cuts too fast in small basswood, feels unsafe/scary gast. The slower Echo CS-590 gives me that feeling of more control over the saw. I also prefer the weight of the CS-590 over the 572xp, so much so that I'm probably going to get it modded. Will be as fast as or faster than the 562xp for less money and just as reliable.
@MyHMMWVaddiction
2 жыл бұрын
Yes love my CS-670 24"
@InTheWoodyard
2 жыл бұрын
I like speed!
@andrewslagle1974
2 жыл бұрын
I got the echo 620pw a few months ago its a great saw .
@dentondunn4346
2 жыл бұрын
I bought a CS590 and had Iowa Performance Saw's do a muffler mod and retune it and man its a power house for what it is. It eats in hardwood we have here in KY, has tons of torque. I love my Timberwolf
@CharlesWinters-ie3jy26 күн бұрын
I usually use a big saw till I tired. I then eat lunch and grab a smaller saw.
@InTheWoodyard
26 күн бұрын
Yup, that is a good plan!
@bob_frazier2 жыл бұрын
I hope the electronic ignitions are here to stay. Everyone who's ever had a carb let them down should.. Instant throttle, auto adjusts for elevation, best power to weight ratio, such nice saws. The 500 drinks fuel though, and that is an issue for timber fallers and firefighters who pack them in.
@InTheWoodyard
2 жыл бұрын
Yes that is true, but the 500 really cuts!
@toddsoutsideagain2 жыл бұрын
I have the 400c and it is the biggest saw I have ever owned. Having it for a while now I am impressed by the low vibration and power! I bought the 400c for 850.00 in my area so considerably less than the 500. For me less money and weight made sense to go with the 400. I’m sure I would be envious of the power if I ever get a 500 in my hands🤣GNI
@sffabrications3872
2 жыл бұрын
500i is far superior than the 400. Extremely hard to get tho
@EuroYardService
2 жыл бұрын
@@sffabrications3872 my dealer had a 500 sit a long time and all the other’s models were sold out
@InTheWoodyard
2 жыл бұрын
The 400 is nice but try both side by side and your eyes will get big!
@InTheWoodyard
2 жыл бұрын
Yup!
@Out.In.The.Country2 жыл бұрын
Mike is probably wishing he would have bought the MS500i now! Both are great saws. Would love to see a comparison versus your Husky's! Love videos like this!! Especially with the Stihl saws. :)
@InTheWoodyard
2 жыл бұрын
We will do that some day!
@danstevens22044 ай бұрын
You know that thing you were pushing against will actually hold the saw while you work on it.
@InTheWoodyard
3 ай бұрын
yup
@AdventureswithPatrick Жыл бұрын
I use my 400 cm so much more than the 500i. Mainly because the 400 is just smoother. The 500 is nice in the wood, but it has a lot of vibration when walking around with it idling.
@InTheWoodyard
Жыл бұрын
Both nice saws!!!
@malisinimicus43585 ай бұрын
great video and side by side comparison along with the saw sharpening. my first saw was an 029 and it was awesome for limbing and wood up to 10". My Father and i were going to log a property with pretty large fir and Larch and cedar so we traded my 029 in for an 036 which after logging that property has been used ever since for yearly firewood cutting to this day! It is a truly awesome saw so i rebuilt it last year but recently got a Granburg 30" alaskan mill so have been shopping for a new Stihl (afterall a saw that has lasted for over 30 years why wouldnt i stick with another Stihl?) was considering a 500i but i wanted a saw that i can do a combination of felling, linbing and bucking firewood for approx 6hrs. The 400 is just slightly heavier than my 036 but more powerful so i ordered one. watching videos of slightly mod'd 400's with porting and bark box exhaust it looks like a 400 can cut as fast as a stock 500i or very close to it. the 400 should also allow me to do some alaskan milling as well once mod'd and set up with ripping chain! So am thinking the 400 is the best all round Stihl saw available and should be able to relinquish the older yet still fantastic 036 to now being my helpers saw or my back up saw!
@InTheWoodyard
5 ай бұрын
Yup,l nice saws!
@duck-n-cover477 Жыл бұрын
400cm with Bark Box all day long. For the price, if going bigger, go with the 592xp for same $$$ as 500i. The 500i is a high priced niche saw.
@InTheWoodyard
Жыл бұрын
Yup!
@PurpleCollarLife2 жыл бұрын
Both saws look amazing. Great video!
@InTheWoodyard
2 жыл бұрын
They are!
@scottbarrett67542 жыл бұрын
Ha - Chris - we are getting old! I have the same light hung above my chain saw sharpening area so I can see my chain.
@InTheWoodyard
2 жыл бұрын
More light is better!
@swere12402 жыл бұрын
if you have different size teeth you just have to make sure the height between the raker and the tooth is the same as each tooth. you dont notice it in smaller stuff like this but once you start cutting some big stumps or somthing if your rakers arent right youll start to cut on an angle same as if one side is sharper then the other.
@InTheWoodyard
2 жыл бұрын
Yes, good point!
@nicholascooper11932 жыл бұрын
I've been considering the MS400C or a Echo 7310. By the reviews the 7310 seems like a "torque saw" meant for pulling a long bar in big wood, but isn't that fast, and the MS400C is a a screamer, more like a Husky XP series... I've spent (wasted) a lot of time working a 450 Rancher to death and I think it's time for a real saw. Even my Dad's old 359 Husky seems twice as fast as the 450 Rancher.
@nvrdwn3140
2 жыл бұрын
A 400c is a very nice saw.
@InTheWoodyard
2 жыл бұрын
Try a 572 husky too, same price and faster
@InTheWoodyard
2 жыл бұрын
Yup!
@nicholascooper1193
2 жыл бұрын
@@InTheWoodyard I need to go to a dealer and look at them, I’d prefer a Husky. Everywhere I look online the 572xp is $1000+ and the other 2 are $850
@JeffGeorgalas Жыл бұрын
Chris flat-out gets it done. You're/he's a worker. He also knows a sharp chain. The other two guys, Tony and that other gentleman, well.........I'll leave it at that.
@InTheWoodyard
Жыл бұрын
Tony and Mike are great guys!
@aarons32032 жыл бұрын
Good sharpening Chris! Stihl has a new hex file chain coming out that's more like a square - round hybrid.
@InTheWoodyard
2 жыл бұрын
Thanks Aaron!
@JTFraser876 ай бұрын
What size dremal bit do you use for the chains?
@InTheWoodyard
6 ай бұрын
I use the OREGON 7/32 stone bits for my size chain about $6-7 for 3
@knifesaslice13102 жыл бұрын
Nice comparison. I still think a 266xp is the GOAT firewood saw.
@InTheWoodyard
2 жыл бұрын
A lot of loggers think the Husqvarna 372 is the best all around saw.
@markdumont68622 жыл бұрын
Good night Irene! LOL You got em trained well Chris.
@InTheWoodyard
2 жыл бұрын
I am working on it!
@bencote22192 жыл бұрын
“I have a 592 coming” says every guy in the US right now 🤣 Fast forward to 2023 we’ll be saying the same thing
@InTheWoodyard
2 жыл бұрын
Yup, I just heard that it is not going to be February, most likely June!!!!!!!!!
@dethmaul2 жыл бұрын
The laser's a neat idea!
@InTheWoodyard
2 жыл бұрын
Yes, I am going to give it a try.
@hubertweisz92187 ай бұрын
The 400 sounds much nicer in my opinion. The operator handle the saws like a pro.
@InTheWoodyard
7 ай бұрын
They both cut nice but the 500 is way faster. Thanks, I cut a lot.
@garny37662 жыл бұрын
Get the gullet friends. Us Dolmar guys are like… these guys haven’t run a pro saw yet😆
@JesseLJohnson
2 жыл бұрын
I have a bunch of saws including Stihl, Husqvarna, and Echo but I use my Makita saws the most and they are just a Dolmar. Especially my 6421 love that saw love it even more the I only paid $250 for it lol. Think they are like $650-700 normally but I got mine used but looked like the last owner might have cut a couple face cords with it maybe thing looked new basically still.
@InTheWoodyard
2 жыл бұрын
The chain needs to be sharp!
@InTheWoodyard
2 жыл бұрын
Nice, sounds like a great saw!
@christophernufer49322 жыл бұрын
Awesome like the saws. Shout out to the echo Timberwolf runs great and she's chews through Hardwood like butter for the application that I need it
@InTheWoodyard
2 жыл бұрын
The ECHOs are very nice saws, I would like to try more of them!
@jennykirk9516 Жыл бұрын
I have an ms 261 362 and a ms 500 all with 18 inch bars .my ms 660 has a 20 inch bar I love short bars they go through wood quick I also have an ms 180 and ms 250 with 16 inch bars they all have no problem going through the wood
@InTheWoodyard
Жыл бұрын
I used to have 20" bars but after trying a 24" bar I switched to all 24" and I am glad I did.
@kevinz7632 жыл бұрын
Good video Chris after sharpening the 400 you needed to sharpen that 500 you could tell it needed a touching up when you took over!!! You can also tell the guys that come to the wood yard there haven't cut much wood like you lol nothing against them you just have lots more experience with a saw in your hands like Buckin Billy though someone just starting out trying some of them moves will get themselves hurt because they don't know what or how kickback occurs!!!
@EuroYardService
2 жыл бұрын
Seems many guys are a bit intimidated when they cut and climb the pile with a saw. Chris is just on another level when it comes to nimbleness and raw output.
@InTheWoodyard
2 жыл бұрын
Thanks for watching Kevin!
@InTheWoodyard
2 жыл бұрын
Thanks
@kevinz763
2 жыл бұрын
@@InTheWoodyard Hope you have Happy New Year Chris
@jamiedalluge94722 жыл бұрын
Bang for the buck 400 is better. Did a muffler mod and did the carb calibration and for the size it cuts really nice. 20" standard bar
@InTheWoodyard
2 жыл бұрын
I ran the 462,400 and the 500 the 500 is much faster and the 462 is close.
@jamiedalluge9472
2 жыл бұрын
@@InTheWoodyard my ported 562 husky kills the 400c I bought.
@denisecarter30682 жыл бұрын
Tony is so well trained! Fun guys real fun.
@erickozal9044 Жыл бұрын
Lol the only saw I regret ever getting rid of is my old poulan Wood shark. 10 years of heavier than intended use and only 2 minor repairs. Must have got lucky. This video does make me want a 400 and 500, although it makes no sense for me to get either
@InTheWoodyard
Жыл бұрын
I love the 500!!!!
@erickozal9044
Жыл бұрын
@@InTheWoodyard ahhh don't tell me that! I already have a 462 and 660. Definitely can't justify the purchase for just doing landscaping.
@JohnPlantRS61008 ай бұрын
Question what saw do you guys prefer in the stihl line up for bucking and harvesting firewood. I am on the market again I had the ms660 for about 20 years and really liked it. I'm kind of looking at the 500I or the 661. Any suggestions?
@InTheWoodyard
8 ай бұрын
The 661 is a great saw but the 462 and the 500 are awesome too. Any of them are good saws.
@JohnPlantRS6100
8 ай бұрын
@InTheWoodyard out of the 661 and the 500 which do you think is more reliable?
@Sellarmusic2 жыл бұрын
I'm wondering what kind of chain he has on the MS400. They love to sell those safety chains which in my opinion are garbage. I just picked up an MS400 about a month ago and it just pulls right through anything I've cut so far. Compared to my MS261 it's a bear. Also with a light bar on it, it's very well balanced, over a lb. lighter than the 500i, and at 2/3 the price I felt it was a bargain. That said, I'm still considering picking up a 500i for the really big stuff.
@InTheWoodyard
2 жыл бұрын
The 500 is much faster.
@archo05189 ай бұрын
The 500i is designed for cutting bigger timber, I'd use the 400c for that job.
@InTheWoodyard
9 ай бұрын
Yup maybe so but fast is good!
@craigwilson95602 жыл бұрын
Chris, both saws did awesome. Once the 400i was sharpened, you could tell a difference. 3 great people and great video. I have 241 026, 261, 034, 362, 2-660's --those are boat anchors. I would need to sell a few saws before acquiring the 400i or 500i. What would the 400i be compared to in Husqvarna. Now your 572 XP does that compare to the 500i? I wasnt sure, i only own a 460.rancher that was given to me from a family friend! Chris, Tony, And Mike, thanks for the great video and your wealth of knowledge!
@InTheWoodyard
2 жыл бұрын
The 500 is a lot like my 572 and 576 saws. A screamer!
@craigwilson9560
2 жыл бұрын
I've.been looking into Husqvarna because we have a authorized Seller that is 10 minutes from me. When i accumulated my stihl chainsaws through my firewood business, we had a shop and repair shop close for warranty work. Now we don't. Im thinking about selling a few to upgrade, but it is not like i have to. More like i want to after seeing video's like this!
@rolandfeuz2306
2 жыл бұрын
400i ???
@craigwilson9560
2 жыл бұрын
@@rolandfeuz2306 should be 400c not 400i
@jimmynolte14932 жыл бұрын
My personal opinion is that each raker should be done specifically to each tooth not the same all the way because not all your teeth will be the same size
@InTheWoodyard
2 жыл бұрын
Good point, that makes sense!
@zacherywoodthorp8369 Жыл бұрын
What is that bit you have in your Dremel? Or did you take a file and spin it down on a lathe?
@InTheWoodyard
Жыл бұрын
It is a Oregon 7/32 stone made for sharpening chains on saws, it is easy and works great.
@Autigers2013 Жыл бұрын
Can you please leave a link to the stones you use to sharpen these saws? Thanks!
@InTheWoodyard
Жыл бұрын
They are Oregon 7/32 stones , you can get them at any saw shop or hardware store.
@roger7662 жыл бұрын
Happy New Year everyone! I’d love to get a 500i! I’d buy one today for $1400! Try to find one first, then it won’t be at $1400! Supply and demand, plus greed! Sad but true!
@InTheWoodyard
2 жыл бұрын
Yes they are in demand!
@canvasman23072 жыл бұрын
No matter the saw, you Stihl need a well sharpened chain, break in time on a new saw, and experience as a cutter helps a bunch for efficiency. I give the rakers a couple swipes on new factory Stihl RS chains that are a bit passive for good cutting… probably due to liability concerns. Then they pull good and blow great chips.
@InTheWoodyard
2 жыл бұрын
I like a little more off the rakers myself!
@ericoverdorff8880
Жыл бұрын
@@InTheWoodyard heck ya! Even just a bit grabby.
@powerram922 жыл бұрын
What video do you talk about that laser in? I'm really interested in it.
@InTheWoodyard
2 жыл бұрын
I just shot a new one with it the other day, it will be out soon!
@jameswilson91422 жыл бұрын
Great video as always. I have an ms880 it’s heavy but the vibration is a killer, i was wondering is there any difference in the vibration of the 500 and 572. Have been told the 572 is a great saw as far as vibration is concerned thanks.
@dodgyhodgie734
2 жыл бұрын
500i is pretty great for vibration although I believe the general consensus is that the 572 has a better AV system. Or just husky in general I can't tell the difference personally.
@jameswilson9142
2 жыл бұрын
@@dodgyhodgie734 Thanks for the information.
@InTheWoodyard
2 жыл бұрын
To me both saws are very similar.
@InTheWoodyard
2 жыл бұрын
Yup!
@waynejohnson98552 жыл бұрын
I have a 462 stihl and have compared to the 500i and there is not enough difference to me to spend more money on the 500i. My 462 is currently getting worked on it quit oiling so after 2 seasons I’m not to thrilled about that. 200 tanks of gas through it so it has cut quite a bit. What I find most time consuming is splitting and handling which is really a no brainer. I usually cut a tank and than split it and I split by hand so I can get a tank of gas cut and split every hour. I do have a couple husqvarna saws a 562 and a 390. Also which I really like them but I got a huge discount on the 462 through my work or I would not have bought it.
@InTheWoodyard
2 жыл бұрын
Yes, the 462 is a great saw, a lot say just as good as the 500!
@TheOMEGANOX
Жыл бұрын
I don’t know anyone that had a 462 and got a 500 and didn’t sell the 462.
@waynejohnson9855
Жыл бұрын
@@TheOMEGANOX the first problem is guys want the latest and greatest, I’ve cut plenty of wood and most wood people cut the difference in cuts with a bigger saw is minimal until you get into real big wood than it will make 2 to 3 minutes a cord difference. I kind of doubt most people that buy a new saw sell the other one.
@jacobwelle55782 жыл бұрын
I would like to see a comparison of a 660 with 404 chain compared to a 500I. Everyone talks about how fast the 500I is but a 660 with 404 chain out cuts it by far. I only use 660s because time is money.
@InTheWoodyard
2 жыл бұрын
Yup speed is good!
@dcvariousvids8082 Жыл бұрын
Yep. Weight! The 500i is a great saw but it’s not an all day saw. Someone posed the not so obvious question before the 500i actually went on sale. That being, the only problem with the the 500i, is that the 462 already exists. And although the 462’s vibration levels are more than either the 500i or 400, it probably is an all day saw. Where the 400 wins, is not on power or grunt but on weight & vibration. Definitely an all day saw 500i - 6.2kg, 5kW, 79.2cc, vib. L4.2 R4 462 - 6.0kg, 4.4kW, 72.2cc, vib. L4.8 R3.6 400 - 5.8kg, 4kW, 66.8cc, vib. L3.5 R3.5 When I got the 500i, the 462 was also on my shortlist, as were the 572/6 and 560/2. I borrowed a 400 a while back but just wasn’t the saw for me. (I also have a 545 Mk1 & 550 Mk2) But needed a saw with more grunt for bigger stems. If I had my time over, I’d have the 462 over the 500i. As it’s not what you have; but what you can do with it that counts.
@InTheWoodyard
Жыл бұрын
They are all nice saws!
@julianalderson3938 Жыл бұрын
Both great but 500 more fire power for most i do. An boss has one really only comes out for bigger timber. 400 just so light n nimble still. Thanx fullas
@InTheWoodyard
Жыл бұрын
I really like the 500!!
@maddierosemusic Жыл бұрын
It's true, the bigger saw is exponentially faster - and you said it in a video - get a bigger saw a bigger splitter, a bigger trailer. Buy once, cry once. I had a 180 (30 cc) and it was great and thought cutting a 30" log was, well, decent but a little time consuming. Instead of moving up to a 250 or even 291 (50 cc) I just pulled the plug and got a 461 (77 cc) and there is no comparison. None. There is no replacement for displacement!
@InTheWoodyard
Жыл бұрын
Right on! I agree!
@JohnFrytag2 жыл бұрын
Looks like Mike is heading to a trade in….Great vid!
@InTheWoodyard
2 жыл бұрын
Maybe, but the 400 is very nice!
@JohnFrytag
2 жыл бұрын
@@InTheWoodyard oh yeah how can ya beat a stihl or husky. I remember as a kid struggling with mcculloch and homelite XL…. Different world.
@markb14872 жыл бұрын
Here in the UK the Stihl 500i is a £1000+ machine,,I would be interested in the price over there??
@InTheWoodyard
2 жыл бұрын
I believe $1400-$1500 US
@markb1487
2 жыл бұрын
@@InTheWoodyard so almost the same price,,which is good to know..
@Lifeinthe9062 жыл бұрын
Next time I'm in the woodyard we gotta invite Tony with his fancy 500i!! GNI
@InTheWoodyard
2 жыл бұрын
Yes!!!
@Robin_Polarstern9 ай бұрын
1350€ = 1431$ in Germany for a Stihl MS 400 and this saw is made in my country is this not unfair ?
@InTheWoodyard
9 ай бұрын
Maybe you need to move here, we have lots of stuff and lots of freedom, for a little while yet.
@bruceramsden82452 жыл бұрын
Chris, have seen you cut many species, why never walnut?
@InTheWoodyard
2 жыл бұрын
I have cut a few, but we do not have many here.
@jamesstan3172 жыл бұрын
The 2 n 1 will never get gullet. It’s ok for quick touch ups but to keep chain sharp it’s not very good.
@InTheWoodyard
2 жыл бұрын
That is what I have found too!
@kennyp5072 жыл бұрын
Valuable and entertaining - especially when the animal hit the pile.
@InTheWoodyard
2 жыл бұрын
Thanks for watching Kenny!
@jeanpomerleau84162 жыл бұрын
They kind of make my Sthill 017 with 30 cc's seem a little silly now
@InTheWoodyard
2 жыл бұрын
If that is what you like and it cuts, that is all that matters!
@arnilazarev17712 жыл бұрын
👍👍👍👍👍 отличные пилы. Мне нравятся больше 440, 460, 880, жалко что перестали выпускать их. Они качественные и надёжнее этих.
@InTheWoodyard
2 жыл бұрын
Thanks for watching ARNI!
@brianquigley7336 Жыл бұрын
A 261 would be plenty for that little wood.
@InTheWoodyard
Жыл бұрын
Yup
@danahasson28922 жыл бұрын
New nickname for you Chris, Cat Claw Sharp Chris. A sharp chain is the only way to compare a saw.
@InTheWoodyard
2 жыл бұрын
Thanks and yes....sharp!
@thefirewooddoctor2 жыл бұрын
You should have Gary Buxton mod one of your 572xp saws and see how you like a modded saw. I'll bring my Echo to your woodyard once it is done.
@InTheWoodyard
2 жыл бұрын
What do you gain?
@thefirewooddoctor
2 жыл бұрын
@@InTheWoodyard, buying and modifying the Echo 590 makes it as good or better than the 562xp for less money than the 562xp costs. Plus is lighter than the 572xp.
@darrenmorrow56972 жыл бұрын
I have a 260 stihl and a 288 husky something mid 60cc would be a great a all rounder
@InTheWoodyard
2 жыл бұрын
Yes a 60-70 cc saw is a great all around size!
@mattsfirewoodvideos7382 жыл бұрын
That 400 moves like my 400 keep em sharp and they fall thru the wood
@mattsfirewoodvideos738
2 жыл бұрын
I've been messing around with the square file at like 20 degrees and it gets really sharp
@InTheWoodyard
2 жыл бұрын
nice!
@InTheWoodyard
2 жыл бұрын
It is a nice saw!
@DanielAtkinsFirewood2 жыл бұрын
Another good video with 2 good guys and 1 great guy from out of state. 😁👍 See you next on the other side of 2021..
@InTheWoodyard
2 жыл бұрын
Thanks 👍
@SUROBLEDEKchannel2 жыл бұрын
Nice jobs 👍👍
@InTheWoodyard
2 жыл бұрын
Thanks!
@peterbabcock45682 жыл бұрын
What a difference
@InTheWoodyard
2 жыл бұрын
Yes, both saws are nice but the 500 is a screamer. And a sharp saw is a good saw!
@peterbonaccorsi34452 жыл бұрын
Great information video Chris Thank's for sharing.
@InTheWoodyard
2 жыл бұрын
Thanks for watching!
@domrudd50422 жыл бұрын
What length do you cut your wood to? Love the videos! Keep up the great work!!
Пікірлер: 365
Sharp chain means more than cc , in my opinion .
@InTheWoodyard
2 жыл бұрын
Yup at least equal!
@gor4988
2 жыл бұрын
Not to mention the operator
@zacherywoodthorp8369
Жыл бұрын
Agree, seen my 362 with a 25" bar keep up with a 462 25" bar both with RS chains
@matthewotis3594
Жыл бұрын
Have the biggest motor you can hold and it won't cut shit with a full chain. I must agree with ya.
@dallaspeterson2024
Жыл бұрын
Sharp chain maximizes what cc you have, for sure, but there's no replacement for displacement !
I have a bunch of saws. An 880, 660, 440, a ported 064, 038 magnum, 034 and a 241c. The saw I reach for first is the 241, with just a 14” bar it rips the full length, it’s so light it feels like a bread knife. It’s only when limbs or stems are larger than 14” I go up a saw. Chain sharpness is key.
@InTheWoodyard
2 жыл бұрын
Yup, sharp matters the most!
@llewmatthews4828
10 ай бұрын
Yeah i got that 241cm. Its the super thin chain that makes it fast. It just feels like a well made unit. Hard to describe. Feels better in my hands than a 261, sounds better too.
#1 is always having a sharp chain , that means the skills to drop down and hand file in the field. Beyond that it's personal preference. I have several pro level saws and always grab my ported light bar 261 as it just light and powerful. I think after all the years of saw work I like saws on the slightly smaller side for the job at hand .
@InTheWoodyard
2 ай бұрын
For a long day in the woods the right size saw or one size smaller is nice but then again the bigger saw finishes first. I find that I am always the weak link not the saws!
Chris, thank you so much for letting me interrupt your busy day. I had a great time with you and Tony. Learned quite a bit too! Appreciate the youtube boost too! Until next time brother! Happy New Year!
@InTheWoodyard
2 жыл бұрын
Thank you for stopping in!
I started out with cheap homeowner saws and when I bought my first pro saw I never looked back. If your gonna cut any amount of wood Pro level saws are the way to go!
@InTheWoodyard
2 жыл бұрын
Good call!
I bought a ms661 r c m and loved the power and efficiency. I can handle big stuff and scream through little stuff. However it's a bit heavy so I also got a ms400c and it's perfect for the majority of what I cut.
@InTheWoodyard
2 жыл бұрын
Yup, the 400 is a nice size saw!
Great video. I have an MS 290 Farm Boss that is now 10 years old. Just used it all day cutting wood. Still runs like a brand new saw! Absolutely love it
@InTheWoodyard
Жыл бұрын
Nice!!
@ericoverdorff8880
Жыл бұрын
Like wise. I've cut well over 100 cords with my 290 and it runs just as strong as new. Although! My handle is wired together, the chain brake handle is gone, broken off, and a crack in the frame under your throttle hand, and the fuel tank leaks just a wee bit. I'm in the market for a blown 290 for a parts saw, if there is such a thing? But in the mean time I bought myself a brand new 400cm. I've owned it a few months now and haven't even started it yet. I'm looking forward to spring and getting out cutting again.
I have a 562 XP nice and light I cut 100 bush cord last year or 300 face cord but after watching you Chris makes me want another saw so if one gets dull or runs out of gas I can swap and keep cutting
@thefirewooddoctor
2 жыл бұрын
I run three saws. Husqvarna 572xp and 550xp, plus the Echo CS-590. It is nice having three saws ready to go.
@InTheWoodyard
2 жыл бұрын
Yes! Get a 572 and switch back and forth to give them a break and to get more done!
If you cut much wood in the woods. I like a big saw for bucking and a lighter saw for limbing Particularly when reaching up for limbs. Love my 261 for limbing. Bucking on a log pile no need for smaller saw.
@InTheWoodyard
2 жыл бұрын
Yup, that sounds right!
As for filling rackers the gauges I have used for 60 years are all hardened steel and I think they are designed to be placed on the saw blade and filed in place.This is a much more accurate way to do rackers and no room for error.
@InTheWoodyard
2 жыл бұрын
Yes but they do not take off as much as I like.
@robertpepper2767
2 жыл бұрын
@@InTheWoodyard but you don’t explain this is your choice not the norm. Justsayin
I have my name on the list at the local shop to get a 400 and this video sold me on it. I dont sell firewood, i just cut for me. I dont even heat with wood, but i have about 4 full cords, or 12 face cords if you prefer 🤣 cut, split, and stacked. I want the 400 because my big saw at the moment is a 291 w a 20" bar, and i have 3 big oaks to cut up, and it will just be easier with a longer bar(25") and a more powerful saw. The 291 is a dog in big wood. Works great in 16" and under but not the big stuff.
@InTheWoodyard
2 жыл бұрын
For your application, very good choice!
I will keep my 372, 572 and 550xp MK 2 thank you. I use skip tooth chains on the big saws, and they cut very fast. Watch Donny Walker's channel for issues they are having with the 500i.
@thefirewooddoctor
2 жыл бұрын
No need for skip-tooth chain until you get into 28in or bigger wood. 24in wood full-comp is faster in 24in wood. Not by much, but is faster. 28in wood the two chain types cut at the same speed. Now in hard dry oak or locust the skip-tooth might be quicker in 24in wood.
@InTheWoodyard
2 жыл бұрын
Me to, but the 500 really cuts!
@timfunk5084
2 жыл бұрын
@@thefirewooddoctor True if you have small limbs skip tooth chain will pull them instead of cutting. Skip tooth maybe a little faster to sharpen.
Muy buen vídeo, yo tambien afilo con la dremel y el kit de afilado para sierras. Y cuando estoy en el monte si uso el kit de afilado Stihl con la lima, solo para mantener el filo. Ya que con la dremel queda muy bueno el filo, mejor que con la lima.
@InTheWoodyard
3 ай бұрын
Thanks for watching!
that 500 is a completely different beast. sounds different than a 462. got its own hollow tone. what a cutter.
@InTheWoodyard
2 жыл бұрын
Yes! It sure is!
@TheOMEGANOX
Жыл бұрын
Yep, unicorn. I keep mine on the shelf and only pull it out occasionally like a Sunday hotrod but when I do it makes me feel like a kid every damn time.
Chris, I have put brand new Stihl chains on my MS-291 and the saw did not cut good at all. I put the saw in my vise and got out my file and then the saw would make nice long chips. I agree, the factory chain is good enough to get it out of the store - I am not good a chain sharpening but I have learned from KZread and various channels to improve the skill - it takes time and understanding to improve - enjoy the journey - cheers
@InTheWoodyard
2 жыл бұрын
Yes, you can get them sharper for sure! Thanks for watching Bob!
@dentondunn4346
2 жыл бұрын
Go buy the Stihl 2 in 1 file, it works and makes it easy
Chain makes a big differnece for sure. a 50-60 cc saw 20-24 inch bar and 70cc saw with 28-32 cc makes a great firewood duo.Never hurts to buy the most cc you can when buying a saw.
@InTheWoodyard
Жыл бұрын
Yup, I like the 70 cc size best.
Good morning Chris!! Both of those saws are really sweet!! I really don't think either one of them are broken in yet. Especially Mike's 400. You definitely could have taken the rakers down a couple more strokes. Neither saw was working very hard. But you don't want to make them too aggressive for their rookie owners. Both of the saws need another 5 gallons of fuel put through them and they will really start to wake up. Nice comparison Chris!!😀😀👍👍 Take care my friend!! TTYL!! Logger Al
@InTheWoodyard
2 жыл бұрын
I agree with that for sure!
@dethmaul
2 жыл бұрын
They take more breaking in than ten minutes? My friend told me to let my new saw warm up on the ground for 5 minutes idling, gently cut maybe 30 forearm sized branches at half-throttle, then it's done. Ready to rip. Broke in.
@aldredske6197
2 жыл бұрын
@@dethmaul not even close. Most of my new saws took 30 to 40 hours for them to really be broken in all the way and depending on the saw sometimes even more.
@truckguy6.7
2 жыл бұрын
@@aldredske6197 Just for clarification? Broken in as not having full power? Or broken in and you shouldn't run it at full throttle yet?
@aldredske6197
2 жыл бұрын
@@truckguy6.7 not having full power.
Great video. I'll still say if you ever consider getting a 60cc saw make sure to try a husky 562xp before buying. You can use same bars and chains on 562xp as your 572xp and 576xp. Myself I own both husky and stihl and love both. And yes the 500i is a screamer but air filtration could be alot better. Seems like my 500i I clean steady but my 562xp and 572xpg I hardly have to clean.
@InTheWoodyard
2 жыл бұрын
I have run a 562 and I would much rather run a 572
@heily-3806
Жыл бұрын
Nothing worse than a husky fanboy! if you love huskies then why aren’t you watching a husky video?
@rodt2781
Жыл бұрын
@@heily-3806 I run both husky and stihl pro saws and both are great, but both feel different to. Husky has fatter handlebar and trigger handle which I find grippier and nicer to make notches and back cuts, but husky heavier when limbing. Stihl are lighter and much nicer for limbing for that reason. But as far as power goes both have loads of power and both cut fast.
Another great video! You are totally correct that each cutter doesn’t have to be the same length. However, the raker on a short cutter needs to also be shorter than the rakers on the longer cutters. If you have a short cutter be sure to use your depth gauge on that one to get it right.
@InTheWoodyard
2 жыл бұрын
Yes, the depth gauge matters!
@ericoverdorff8880
Жыл бұрын
I never use a depth gauge,, just tap each raker with my angle grinder every few sharpening's.. once in awhile I get them a bit low and the chain gets a bit grabby, but keep the revs up and it cuts like nobody's business.
@lukester478
11 ай бұрын
Stop jackhammering your wood, get a gauge
I haven’t tested it but I believe my 372 will cut with my 395 in small wood. After you get above 12 inches the 395 definitely faster. The downside is I can cut all day with the 372. The 395 on the other hand wears me out. Great video nothing wrong with the white saws other then for the price of that 500 i you can get 1 and a half 372.
@InTheWoodyard
2 жыл бұрын
Great point! I agree!
Dam I’m 31 out here complaining the 25in rolomatic es bar is too heavy for that saw and shopping for a light bar but this old man is out here ripping the thing.
@InTheWoodyard
Ай бұрын
I am exactly twice as old as you! You can do whatever you want to if you want it bad enough!
Others may have said it already. But I have found the stihl green link "safety" chain cuts alot less aggressively than the standard yellow link chain. I am also not big fan of the 2 in 1. When I am on my filing game I can tell a noticeable difference between hand filed and the 2 in 1.
@InTheWoodyard
2 жыл бұрын
Safety chain suck.
@thehustleandhobby8694
2 жыл бұрын
The green chain is normally for home owner saws or people with less experience
@6900pilot
2 жыл бұрын
I found the 2 in 1 filed the rakers more on one side than the other. I switched to the stihl file with the guide and a separate gauge and file for the rakers, takes longer but better job.
Haven't ran the 400 yet. At the moment I have no need for one. When I have to replace my 362 I may do so with the 400. When it comes to the 500i, I personally like my 462 better than the 500i.
@InTheWoodyard
2 жыл бұрын
I have heard that the 462 and the 500 are very similar.
@timtorkelson7201
Жыл бұрын
Like Buckin Billy Ray mentioned " I think the 500I has a problem it's the 462" 😂
Nice comparison of the 400 and 500. Once you sharpened they cut better. Have a Safe Day
@InTheWoodyard
2 жыл бұрын
Thanks David!
I would love to run the 400 and see how it compares to my 362.. I just traded my 461 in for the 500i a couple weeks ago.. and wow!! more power, less weight & a little easier starting I really really like the 500i
@InTheWoodyard
2 жыл бұрын
Good choice!The 400 is much slower, the 500 is a screamer!
@travisteeter5072
2 жыл бұрын
Love my 361 which has been the best saw ever for the past 15 yrs, now owning a 500i has made it the redheaded step child
@timtorkelson7201
Жыл бұрын
Love my 462cm!! To me Joe firewood cutter it's a beast!
@montanawildman8600
10 ай бұрын
Hi there just started working for a whole new tree service company, and this new outfit has so many variety of brand and sizes of saws, I fall timber myself and sharpen chains very good, I got to test our saws all out and the stihl 400 is so much better than a 362! Big difference, those 400 are amazing fast and light also, 362 is weak, 500i are amazing, super fast and strong torque, I do know a 400 with either 20 or a 25 inch bar is awesome
@daveyboy6985
2 ай бұрын
@@montanawildman8600do they have any 462's? And if they do, whats your opinion between the 500i and a 462?
Looks great. I would use a nylon net so wood drops down into the net when you cut them. Hard to get net under a pile of wood but if you place net close below you can get some there and use tools to lift or pull wood on to the net.
@InTheWoodyard
Жыл бұрын
Maybe so!
I have a Stihl MS462c and MS400c. I had a MS362c and a MS261c but I found them both to be way to slow compared to the MS462c and never wanted to use them. The MS400c is not quite as fast as the MS462c but close enough that when I use it I'm not missing the extra speed/power of the MS462c that much. I've been thinking about getting a MS661c but it really is more saw than I need and I'm concerned about the weight. I'm also considering a MS500i but I'm not sure if it's that much faster than the MS462c for the money. Dave
@markhowes126
2 жыл бұрын
My son has a 661c. Used it the other day told him I would give up cutting if I had to run it all day. I dropped a big pine with it. Bucked logs (5 12 footers) then drove tractor a quarter mile to trade back to my 261 to limb it. Big saws are great bucking and felling but a man killer limbing!
@oakrunacres2564
2 жыл бұрын
@@markhowes126 I don't do much limbing because 99% of what I cut right now is dead standing or fallen ash. I do get into doing a bit of clearing to make trails to get to the wood and even the 462 is a work out for that. I don't mind a heavier saw and longer bar for bucking and I usually only cut for a few hours per day so maybe the extra weight of a 661 won't be an issue...for a few more years anyway. Dave
@InTheWoodyard
2 жыл бұрын
That is what I have heard too.
@InTheWoodyard
2 жыл бұрын
YES! You are right about that!
@InTheWoodyard
2 жыл бұрын
Yes, I like speed too, get done faster!
That 500 is 1600+ now. Hell of an increase in just a year or so.
@InTheWoodyard
6 ай бұрын
Yup, and food costs are up 30-40% for everyone!
@Mightycaptain
6 ай бұрын
@@InTheWoodyard meanwhile most every large conglomerate corp is raking in records profits every quarter since they started the hikes. Artificial inflation. Stihl is no exception. I haven't gotten a 30 to 40% increase in salary the last 2 years to go with it.
I run a ms 260 and I love it for the fact that it's light and felling trees 🌳
@InTheWoodyard
2 жыл бұрын
Yes they are good saws!
I just picked up a MS 400c and can’t wait to get it in some wood soon !
@InTheWoodyard
2 жыл бұрын
Nice! That is a great all around saw!
@deliverybryan1138
2 жыл бұрын
@@InTheWoodyard thanks brother !
You can tell who has the most experience of you all here I love them saws
@InTheWoodyard
2 жыл бұрын
They are nice saws!
That sharpening seem to make a bit of a difference! I'm surprised his 2 n 1 didnt do a good job, I use a 2 n 1 from the company that makes them for Sthil and it gets my chains cat claw sharp and rakers down. I love mine, I can do my Echo CS 620P with a 24" bar in just a minute or two. My favorite saws are my climbing saw, I have a CS 303T and a CS 355T both Echo and tuned up, both have 14" bars but are light as hell. Love the honest comparisons!
@InTheWoodyard
2 жыл бұрын
The best saws are the ones that are sharp and run!
@scottrush8150
Жыл бұрын
Y666y6y
I have a MS261C it's definitely a Beast with an 18" bar!! It definitely cuts scary fast through small and medium logs and it has lots of low end torque as well. Best investment I've made in the last 2 years hands down!!
@InTheWoodyard
2 жыл бұрын
Yup, that is a nice saw!
@marcbaker0650
2 жыл бұрын
Run a 500i or any big saw and you will be blown away then. I have a 261 also but it is a child’s toy compared to a my 500 or 660.
@johndeere4300
2 жыл бұрын
@@marcbaker0650 I also have a 2007 MS441 with a 20" bar and Stihl yellow chain. It has much more power and torque than my MS261 but for what I bought the 261 for it does an incredible job! I really want to try out the new MS400C someday it would probably cut more like my 441 with less torque of course
@benvasilinda9729
Жыл бұрын
Yea I use the 18” bar while up in the trees when they are to big for my 16” on the 201 but I keep 20” bars for the ones on the ground. 261 weight to power ratio makes it one of the best saws to use. The 500 is great and my buddy’s love them but I just stick with my 661 when cutting stuff big enough for those saws.
@JeffGeorgalas
Жыл бұрын
The 261 (which I have two of) IS NOT a "beast". If a person thinks that a 50cc saw is a beast, they don't know saws. People use that term "it's a beast" entirely too often.
A 661 and a 400 is a perfect combo imo
@InTheWoodyard
2 жыл бұрын
nice choice!
Nice video Chris. I've said it before but you are still the best I've ever seen with the front 1/3 of the bar. Time will be the real test for the pretty Stihls that don't even have the paint wore off the bars. GNI
@InTheWoodyard
2 жыл бұрын
Thanks Larry, yup, they need to be broke in!
Wow, what a difference in the 400 after Chris touched it up. Fun as usual but graduate-level training on filing and raker height. Gonna dig out my dremel and suit it up for filing. That Tony is a hoot!
@InTheWoodyard
2 жыл бұрын
Yup, all saws that are sharp and run well are nice to work with!
Great show. Very informative. Thank you. Over the years I've had people ask to borrow my saw and when I handed it to them I would tell them that the rakers had been filed down. If they asked "what are rakers".? I would tell them what they are for, but I also would put a different chain on (like a factory one that hadn't had touched up rakers) there was always a couple of those around that I didn't care about.
@InTheWoodyard
2 жыл бұрын
That was a mistake, handing someone a saw is like handing them a loaded gun!! I bet they can back dull as a bowling ball! HA!
@jenky1044
2 жыл бұрын
@@InTheWoodyard Yeah, if I remember correctly, that was the only time he used my saw. I think he used it for roto tiller or something.?
In really fast cutting wood like basswood or pine, especially smaller logs, I prefer my Echo CS-590 over my 572xp. The 572xp cuts too fast in small basswood, feels unsafe/scary gast. The slower Echo CS-590 gives me that feeling of more control over the saw. I also prefer the weight of the CS-590 over the 572xp, so much so that I'm probably going to get it modded. Will be as fast as or faster than the 562xp for less money and just as reliable.
@MyHMMWVaddiction
2 жыл бұрын
Yes love my CS-670 24"
@InTheWoodyard
2 жыл бұрын
I like speed!
@andrewslagle1974
2 жыл бұрын
I got the echo 620pw a few months ago its a great saw .
@dentondunn4346
2 жыл бұрын
I bought a CS590 and had Iowa Performance Saw's do a muffler mod and retune it and man its a power house for what it is. It eats in hardwood we have here in KY, has tons of torque. I love my Timberwolf
I usually use a big saw till I tired. I then eat lunch and grab a smaller saw.
@InTheWoodyard
26 күн бұрын
Yup, that is a good plan!
I hope the electronic ignitions are here to stay. Everyone who's ever had a carb let them down should.. Instant throttle, auto adjusts for elevation, best power to weight ratio, such nice saws. The 500 drinks fuel though, and that is an issue for timber fallers and firefighters who pack them in.
@InTheWoodyard
2 жыл бұрын
Yes that is true, but the 500 really cuts!
I have the 400c and it is the biggest saw I have ever owned. Having it for a while now I am impressed by the low vibration and power! I bought the 400c for 850.00 in my area so considerably less than the 500. For me less money and weight made sense to go with the 400. I’m sure I would be envious of the power if I ever get a 500 in my hands🤣GNI
@sffabrications3872
2 жыл бұрын
500i is far superior than the 400. Extremely hard to get tho
@EuroYardService
2 жыл бұрын
@@sffabrications3872 my dealer had a 500 sit a long time and all the other’s models were sold out
@InTheWoodyard
2 жыл бұрын
The 400 is nice but try both side by side and your eyes will get big!
@InTheWoodyard
2 жыл бұрын
Yup!
Mike is probably wishing he would have bought the MS500i now! Both are great saws. Would love to see a comparison versus your Husky's! Love videos like this!! Especially with the Stihl saws. :)
@InTheWoodyard
2 жыл бұрын
We will do that some day!
You know that thing you were pushing against will actually hold the saw while you work on it.
@InTheWoodyard
3 ай бұрын
yup
I use my 400 cm so much more than the 500i. Mainly because the 400 is just smoother. The 500 is nice in the wood, but it has a lot of vibration when walking around with it idling.
@InTheWoodyard
Жыл бұрын
Both nice saws!!!
great video and side by side comparison along with the saw sharpening. my first saw was an 029 and it was awesome for limbing and wood up to 10". My Father and i were going to log a property with pretty large fir and Larch and cedar so we traded my 029 in for an 036 which after logging that property has been used ever since for yearly firewood cutting to this day! It is a truly awesome saw so i rebuilt it last year but recently got a Granburg 30" alaskan mill so have been shopping for a new Stihl (afterall a saw that has lasted for over 30 years why wouldnt i stick with another Stihl?) was considering a 500i but i wanted a saw that i can do a combination of felling, linbing and bucking firewood for approx 6hrs. The 400 is just slightly heavier than my 036 but more powerful so i ordered one. watching videos of slightly mod'd 400's with porting and bark box exhaust it looks like a 400 can cut as fast as a stock 500i or very close to it. the 400 should also allow me to do some alaskan milling as well once mod'd and set up with ripping chain! So am thinking the 400 is the best all round Stihl saw available and should be able to relinquish the older yet still fantastic 036 to now being my helpers saw or my back up saw!
@InTheWoodyard
5 ай бұрын
Yup,l nice saws!
400cm with Bark Box all day long. For the price, if going bigger, go with the 592xp for same $$$ as 500i. The 500i is a high priced niche saw.
@InTheWoodyard
Жыл бұрын
Yup!
Both saws look amazing. Great video!
@InTheWoodyard
2 жыл бұрын
They are!
Ha - Chris - we are getting old! I have the same light hung above my chain saw sharpening area so I can see my chain.
@InTheWoodyard
2 жыл бұрын
More light is better!
if you have different size teeth you just have to make sure the height between the raker and the tooth is the same as each tooth. you dont notice it in smaller stuff like this but once you start cutting some big stumps or somthing if your rakers arent right youll start to cut on an angle same as if one side is sharper then the other.
@InTheWoodyard
2 жыл бұрын
Yes, good point!
I've been considering the MS400C or a Echo 7310. By the reviews the 7310 seems like a "torque saw" meant for pulling a long bar in big wood, but isn't that fast, and the MS400C is a a screamer, more like a Husky XP series... I've spent (wasted) a lot of time working a 450 Rancher to death and I think it's time for a real saw. Even my Dad's old 359 Husky seems twice as fast as the 450 Rancher.
@nvrdwn3140
2 жыл бұрын
A 400c is a very nice saw.
@InTheWoodyard
2 жыл бұрын
Try a 572 husky too, same price and faster
@InTheWoodyard
2 жыл бұрын
Yup!
@nicholascooper1193
2 жыл бұрын
@@InTheWoodyard I need to go to a dealer and look at them, I’d prefer a Husky. Everywhere I look online the 572xp is $1000+ and the other 2 are $850
Chris flat-out gets it done. You're/he's a worker. He also knows a sharp chain. The other two guys, Tony and that other gentleman, well.........I'll leave it at that.
@InTheWoodyard
Жыл бұрын
Tony and Mike are great guys!
Good sharpening Chris! Stihl has a new hex file chain coming out that's more like a square - round hybrid.
@InTheWoodyard
2 жыл бұрын
Thanks Aaron!
What size dremal bit do you use for the chains?
@InTheWoodyard
6 ай бұрын
I use the OREGON 7/32 stone bits for my size chain about $6-7 for 3
Nice comparison. I still think a 266xp is the GOAT firewood saw.
@InTheWoodyard
2 жыл бұрын
A lot of loggers think the Husqvarna 372 is the best all around saw.
Good night Irene! LOL You got em trained well Chris.
@InTheWoodyard
2 жыл бұрын
I am working on it!
“I have a 592 coming” says every guy in the US right now 🤣 Fast forward to 2023 we’ll be saying the same thing
@InTheWoodyard
2 жыл бұрын
Yup, I just heard that it is not going to be February, most likely June!!!!!!!!!
The laser's a neat idea!
@InTheWoodyard
2 жыл бұрын
Yes, I am going to give it a try.
The 400 sounds much nicer in my opinion. The operator handle the saws like a pro.
@InTheWoodyard
7 ай бұрын
They both cut nice but the 500 is way faster. Thanks, I cut a lot.
Get the gullet friends. Us Dolmar guys are like… these guys haven’t run a pro saw yet😆
@JesseLJohnson
2 жыл бұрын
I have a bunch of saws including Stihl, Husqvarna, and Echo but I use my Makita saws the most and they are just a Dolmar. Especially my 6421 love that saw love it even more the I only paid $250 for it lol. Think they are like $650-700 normally but I got mine used but looked like the last owner might have cut a couple face cords with it maybe thing looked new basically still.
@InTheWoodyard
2 жыл бұрын
The chain needs to be sharp!
@InTheWoodyard
2 жыл бұрын
Nice, sounds like a great saw!
Awesome like the saws. Shout out to the echo Timberwolf runs great and she's chews through Hardwood like butter for the application that I need it
@InTheWoodyard
2 жыл бұрын
The ECHOs are very nice saws, I would like to try more of them!
I have an ms 261 362 and a ms 500 all with 18 inch bars .my ms 660 has a 20 inch bar I love short bars they go through wood quick I also have an ms 180 and ms 250 with 16 inch bars they all have no problem going through the wood
@InTheWoodyard
Жыл бұрын
I used to have 20" bars but after trying a 24" bar I switched to all 24" and I am glad I did.
Good video Chris after sharpening the 400 you needed to sharpen that 500 you could tell it needed a touching up when you took over!!! You can also tell the guys that come to the wood yard there haven't cut much wood like you lol nothing against them you just have lots more experience with a saw in your hands like Buckin Billy though someone just starting out trying some of them moves will get themselves hurt because they don't know what or how kickback occurs!!!
@EuroYardService
2 жыл бұрын
Seems many guys are a bit intimidated when they cut and climb the pile with a saw. Chris is just on another level when it comes to nimbleness and raw output.
@InTheWoodyard
2 жыл бұрын
Thanks for watching Kevin!
@InTheWoodyard
2 жыл бұрын
Thanks
@kevinz763
2 жыл бұрын
@@InTheWoodyard Hope you have Happy New Year Chris
Bang for the buck 400 is better. Did a muffler mod and did the carb calibration and for the size it cuts really nice. 20" standard bar
@InTheWoodyard
2 жыл бұрын
I ran the 462,400 and the 500 the 500 is much faster and the 462 is close.
@jamiedalluge9472
2 жыл бұрын
@@InTheWoodyard my ported 562 husky kills the 400c I bought.
Tony is so well trained! Fun guys real fun.
Lol the only saw I regret ever getting rid of is my old poulan Wood shark. 10 years of heavier than intended use and only 2 minor repairs. Must have got lucky. This video does make me want a 400 and 500, although it makes no sense for me to get either
@InTheWoodyard
Жыл бұрын
I love the 500!!!!
@erickozal9044
Жыл бұрын
@@InTheWoodyard ahhh don't tell me that! I already have a 462 and 660. Definitely can't justify the purchase for just doing landscaping.
Question what saw do you guys prefer in the stihl line up for bucking and harvesting firewood. I am on the market again I had the ms660 for about 20 years and really liked it. I'm kind of looking at the 500I or the 661. Any suggestions?
@InTheWoodyard
8 ай бұрын
The 661 is a great saw but the 462 and the 500 are awesome too. Any of them are good saws.
@JohnPlantRS6100
8 ай бұрын
@InTheWoodyard out of the 661 and the 500 which do you think is more reliable?
I'm wondering what kind of chain he has on the MS400. They love to sell those safety chains which in my opinion are garbage. I just picked up an MS400 about a month ago and it just pulls right through anything I've cut so far. Compared to my MS261 it's a bear. Also with a light bar on it, it's very well balanced, over a lb. lighter than the 500i, and at 2/3 the price I felt it was a bargain. That said, I'm still considering picking up a 500i for the really big stuff.
@InTheWoodyard
2 жыл бұрын
The 500 is much faster.
The 500i is designed for cutting bigger timber, I'd use the 400c for that job.
@InTheWoodyard
9 ай бұрын
Yup maybe so but fast is good!
Chris, both saws did awesome. Once the 400i was sharpened, you could tell a difference. 3 great people and great video. I have 241 026, 261, 034, 362, 2-660's --those are boat anchors. I would need to sell a few saws before acquiring the 400i or 500i. What would the 400i be compared to in Husqvarna. Now your 572 XP does that compare to the 500i? I wasnt sure, i only own a 460.rancher that was given to me from a family friend! Chris, Tony, And Mike, thanks for the great video and your wealth of knowledge!
@InTheWoodyard
2 жыл бұрын
The 500 is a lot like my 572 and 576 saws. A screamer!
@craigwilson9560
2 жыл бұрын
I've.been looking into Husqvarna because we have a authorized Seller that is 10 minutes from me. When i accumulated my stihl chainsaws through my firewood business, we had a shop and repair shop close for warranty work. Now we don't. Im thinking about selling a few to upgrade, but it is not like i have to. More like i want to after seeing video's like this!
@rolandfeuz2306
2 жыл бұрын
400i ???
@craigwilson9560
2 жыл бұрын
@@rolandfeuz2306 should be 400c not 400i
My personal opinion is that each raker should be done specifically to each tooth not the same all the way because not all your teeth will be the same size
@InTheWoodyard
2 жыл бұрын
Good point, that makes sense!
What is that bit you have in your Dremel? Or did you take a file and spin it down on a lathe?
@InTheWoodyard
Жыл бұрын
It is a Oregon 7/32 stone made for sharpening chains on saws, it is easy and works great.
Can you please leave a link to the stones you use to sharpen these saws? Thanks!
@InTheWoodyard
Жыл бұрын
They are Oregon 7/32 stones , you can get them at any saw shop or hardware store.
Happy New Year everyone! I’d love to get a 500i! I’d buy one today for $1400! Try to find one first, then it won’t be at $1400! Supply and demand, plus greed! Sad but true!
@InTheWoodyard
2 жыл бұрын
Yes they are in demand!
No matter the saw, you Stihl need a well sharpened chain, break in time on a new saw, and experience as a cutter helps a bunch for efficiency. I give the rakers a couple swipes on new factory Stihl RS chains that are a bit passive for good cutting… probably due to liability concerns. Then they pull good and blow great chips.
@InTheWoodyard
2 жыл бұрын
I like a little more off the rakers myself!
@ericoverdorff8880
Жыл бұрын
@@InTheWoodyard heck ya! Even just a bit grabby.
What video do you talk about that laser in? I'm really interested in it.
@InTheWoodyard
2 жыл бұрын
I just shot a new one with it the other day, it will be out soon!
Great video as always. I have an ms880 it’s heavy but the vibration is a killer, i was wondering is there any difference in the vibration of the 500 and 572. Have been told the 572 is a great saw as far as vibration is concerned thanks.
@dodgyhodgie734
2 жыл бұрын
500i is pretty great for vibration although I believe the general consensus is that the 572 has a better AV system. Or just husky in general I can't tell the difference personally.
@jameswilson9142
2 жыл бұрын
@@dodgyhodgie734 Thanks for the information.
@InTheWoodyard
2 жыл бұрын
To me both saws are very similar.
@InTheWoodyard
2 жыл бұрын
Yup!
I have a 462 stihl and have compared to the 500i and there is not enough difference to me to spend more money on the 500i. My 462 is currently getting worked on it quit oiling so after 2 seasons I’m not to thrilled about that. 200 tanks of gas through it so it has cut quite a bit. What I find most time consuming is splitting and handling which is really a no brainer. I usually cut a tank and than split it and I split by hand so I can get a tank of gas cut and split every hour. I do have a couple husqvarna saws a 562 and a 390. Also which I really like them but I got a huge discount on the 462 through my work or I would not have bought it.
@InTheWoodyard
2 жыл бұрын
Yes, the 462 is a great saw, a lot say just as good as the 500!
@TheOMEGANOX
Жыл бұрын
I don’t know anyone that had a 462 and got a 500 and didn’t sell the 462.
@waynejohnson9855
Жыл бұрын
@@TheOMEGANOX the first problem is guys want the latest and greatest, I’ve cut plenty of wood and most wood people cut the difference in cuts with a bigger saw is minimal until you get into real big wood than it will make 2 to 3 minutes a cord difference. I kind of doubt most people that buy a new saw sell the other one.
I would like to see a comparison of a 660 with 404 chain compared to a 500I. Everyone talks about how fast the 500I is but a 660 with 404 chain out cuts it by far. I only use 660s because time is money.
@InTheWoodyard
2 жыл бұрын
Yup speed is good!
Yep. Weight! The 500i is a great saw but it’s not an all day saw. Someone posed the not so obvious question before the 500i actually went on sale. That being, the only problem with the the 500i, is that the 462 already exists. And although the 462’s vibration levels are more than either the 500i or 400, it probably is an all day saw. Where the 400 wins, is not on power or grunt but on weight & vibration. Definitely an all day saw 500i - 6.2kg, 5kW, 79.2cc, vib. L4.2 R4 462 - 6.0kg, 4.4kW, 72.2cc, vib. L4.8 R3.6 400 - 5.8kg, 4kW, 66.8cc, vib. L3.5 R3.5 When I got the 500i, the 462 was also on my shortlist, as were the 572/6 and 560/2. I borrowed a 400 a while back but just wasn’t the saw for me. (I also have a 545 Mk1 & 550 Mk2) But needed a saw with more grunt for bigger stems. If I had my time over, I’d have the 462 over the 500i. As it’s not what you have; but what you can do with it that counts.
@InTheWoodyard
Жыл бұрын
They are all nice saws!
Both great but 500 more fire power for most i do. An boss has one really only comes out for bigger timber. 400 just so light n nimble still. Thanx fullas
@InTheWoodyard
Жыл бұрын
I really like the 500!!
It's true, the bigger saw is exponentially faster - and you said it in a video - get a bigger saw a bigger splitter, a bigger trailer. Buy once, cry once. I had a 180 (30 cc) and it was great and thought cutting a 30" log was, well, decent but a little time consuming. Instead of moving up to a 250 or even 291 (50 cc) I just pulled the plug and got a 461 (77 cc) and there is no comparison. None. There is no replacement for displacement!
@InTheWoodyard
Жыл бұрын
Right on! I agree!
Looks like Mike is heading to a trade in….Great vid!
@InTheWoodyard
2 жыл бұрын
Maybe, but the 400 is very nice!
@JohnFrytag
2 жыл бұрын
@@InTheWoodyard oh yeah how can ya beat a stihl or husky. I remember as a kid struggling with mcculloch and homelite XL…. Different world.
Here in the UK the Stihl 500i is a £1000+ machine,,I would be interested in the price over there??
@InTheWoodyard
2 жыл бұрын
I believe $1400-$1500 US
@markb1487
2 жыл бұрын
@@InTheWoodyard so almost the same price,,which is good to know..
Next time I'm in the woodyard we gotta invite Tony with his fancy 500i!! GNI
@InTheWoodyard
2 жыл бұрын
Yes!!!
1350€ = 1431$ in Germany for a Stihl MS 400 and this saw is made in my country is this not unfair ?
@InTheWoodyard
9 ай бұрын
Maybe you need to move here, we have lots of stuff and lots of freedom, for a little while yet.
Chris, have seen you cut many species, why never walnut?
@InTheWoodyard
2 жыл бұрын
I have cut a few, but we do not have many here.
The 2 n 1 will never get gullet. It’s ok for quick touch ups but to keep chain sharp it’s not very good.
@InTheWoodyard
2 жыл бұрын
That is what I have found too!
Valuable and entertaining - especially when the animal hit the pile.
@InTheWoodyard
2 жыл бұрын
Thanks for watching Kenny!
They kind of make my Sthill 017 with 30 cc's seem a little silly now
@InTheWoodyard
2 жыл бұрын
If that is what you like and it cuts, that is all that matters!
👍👍👍👍👍 отличные пилы. Мне нравятся больше 440, 460, 880, жалко что перестали выпускать их. Они качественные и надёжнее этих.
@InTheWoodyard
2 жыл бұрын
Thanks for watching ARNI!
A 261 would be plenty for that little wood.
@InTheWoodyard
Жыл бұрын
Yup
New nickname for you Chris, Cat Claw Sharp Chris. A sharp chain is the only way to compare a saw.
@InTheWoodyard
2 жыл бұрын
Thanks and yes....sharp!
You should have Gary Buxton mod one of your 572xp saws and see how you like a modded saw. I'll bring my Echo to your woodyard once it is done.
@InTheWoodyard
2 жыл бұрын
What do you gain?
@thefirewooddoctor
2 жыл бұрын
@@InTheWoodyard, buying and modifying the Echo 590 makes it as good or better than the 562xp for less money than the 562xp costs. Plus is lighter than the 572xp.
I have a 260 stihl and a 288 husky something mid 60cc would be a great a all rounder
@InTheWoodyard
2 жыл бұрын
Yes a 60-70 cc saw is a great all around size!
That 400 moves like my 400 keep em sharp and they fall thru the wood
@mattsfirewoodvideos738
2 жыл бұрын
I've been messing around with the square file at like 20 degrees and it gets really sharp
@InTheWoodyard
2 жыл бұрын
nice!
@InTheWoodyard
2 жыл бұрын
It is a nice saw!
Another good video with 2 good guys and 1 great guy from out of state. 😁👍 See you next on the other side of 2021..
@InTheWoodyard
2 жыл бұрын
Thanks 👍
Nice jobs 👍👍
@InTheWoodyard
2 жыл бұрын
Thanks!
What a difference
@InTheWoodyard
2 жыл бұрын
Yes, both saws are nice but the 500 is a screamer. And a sharp saw is a good saw!
Great information video Chris Thank's for sharing.
@InTheWoodyard
2 жыл бұрын
Thanks for watching!
What length do you cut your wood to? Love the videos! Keep up the great work!!
@InTheWoodyard
2 жыл бұрын
16" Thanks for watching!