Great video editing brother! Such a great saw and an awesome new friend!

@IndianaDoug

2 жыл бұрын

I had a blast!!! Thanks for letting me show it off, what a saw!

I run a ported 400c daily as a work saw and it’s the nicest saw I’ve run in 20 years. They’re just F’n awesome saws. Over a year of service and I’ve never had to repair it. Just maintenance and good fuel.

@IndianaDoug

2 жыл бұрын

The 400 exceeded my expectations. It’s cut above it’s weight class!

I've got a 400 set up exactly the same. After a couple months I put West Coast dogs, air filter and bark box on it. It runs like a hot ported saw now! I think the 400 is the perfect medium saw. I just ordered a 362 wrap handle for it too.

@IndianaDoug

2 жыл бұрын

I was going to get a 362 full wrap until I saw the price🤦🏻‍♂️

i don't need another chainsaw, i don't need another chainsaw, I dont need another chainsaw........ sigh...... i need a 4th job

@bentwedgestanleybrand5818

2 жыл бұрын

Hey killanger I ordered the ms400c today. With a 24 inch bar. I just got back from the Amish Stihl dealership. Someone had just bought the 400c that they had in stock. I put my name on the list I was the only one. So now it's a waiting game till the saw comes in.

@onlygodknowswhat7595

Жыл бұрын

@@bentwedgestanleybrand5818 Update on your ms400c did it come already?

@bentwedgestanleybrand5818

Жыл бұрын

@@onlygodknowswhat7595 hey speechless, the ms400c came in. I haven't even started it up yet.

@tuberocker69

11 күн бұрын

Bahahahaha I need another saw!

While I am partial to the producer of this series and the featured product...this was a very professional review of the saw and an interview of a real-world working man. Very well done from both gentlemen...

@IndianaDoug

2 жыл бұрын

Thank Brian, I knew you’d enjoy this one sir. Also, thanks for being there for all my questions on lives😁

Hi Doug!!😀😀 Nice seeing you over at KNL!! Mike is a really great guy!! Next time he comes to Wisconsin I'm going to try to get together with him . Him and I have some of the same friends in my area. The 400 is a really nice saw . If I were doing more hand cutting. I would definitely consider buying one of them. Take care my friend!!😀😀👍👍 Logger Al

@IndianaDoug

2 жыл бұрын

Hey Al, yes Mike is awesome. I had a blast!

I don't think anything will ever take the place of my prized 261cm, but I'm an addict lol So here I am looking for a bigger saw to pair with my first love. It's come down to either the 462 or the 400 Great video!

@IndianaDoug

11 күн бұрын

261 is hard to beat for smaller wood.

Doug I have the 400c and it’s the smoothest running saw I have ever had in my hands. My only complaint was the original bar just like Mike said, had it a little off balance. I put a light bar on mine and actually with the help of Mike from KNL he found me some chains and it totally balanced the saw out with the light bar! I would recommend this saw to anyone!!👍🏻👍🏻 TOA

@IndianaDoug

2 жыл бұрын

Thanks for this. See I have a 362cm and it runs and is built so well, but I cut with it and I’m pretty let down. The 400 is on a completely different level! Stihl should have made the newest 362 more like the 400, but nope😒

400 is a legend in the making… The guys and gals who buy them love them.

@IndianaDoug

2 жыл бұрын

That’s what I keep hearing

@julianalderson3938

Жыл бұрын

I do an have done tree work prunin and removein trees. Got a 400cm really like it

@julianalderson3938

Жыл бұрын

Its just powerful to cut bigger stuff. But light to do shit on the ground fast.

Looks like a great saw, thanks Mike and Doug for the video

@IndianaDoug

2 жыл бұрын

It’s the one to get in 2022👍🏻

Really cool idea for a series, also really cool saw

I have the same saw this is year 2. I run a 20” roller tip hard nose bar full house chain. Love the saw and it is the best Stihl I have ever owned and my first one was a 1967 o41 AV super. The shirt bar works great for what I call plunge cutting on hard learners. Power to weight factor and still built in Germany completely adds to this saw. Be safe and be careful

@IndianaDoug

2 жыл бұрын

I was blown away with it.

Just got mine ,love it.

At my shop we sell the 400 with a light bar. It’s the only way to go. Fantastic saw everyone that’s bought one loves it.

@IndianaDoug

2 жыл бұрын

I don’t think I’ve heard anyone dislike these things, and now I see why😆

That's awesome buddy. I've been waiting over 4 months on mine

@IndianaDoug

2 жыл бұрын

What? They don’t have it in stock?

Pretty sure the 400 is optimized to run on the 25” Light bar or the 20” Regular. In my area the Light bars are hard to come by, dealer was going to give me 25” Regular but I opted for 20” Regular since they had no Lights in stock. No regrets, this saw absolutely rips on 20” regular with great balance. Love this chainsaw, be safe y’all

I've had a ms441c for ten years and being the only mtronic saw I've ever used I never gave the winter summer shutter a 2nd thought until I saw a guy on KZread flip the switch. I finally looked at mine and it's been in winter mode for 10 years 🙄. Its a wonder I havent burned it up milling in july and August.

Fabulous review Mike and Indiana Doug, have my “ 400 “ with 20in. light B&C, She is the most beautiful, smoothest Chainsaw I EVER KNEW, love your channel “ I D “ just subscribed, !!! Greetings from Ireland ❤

Had mine only few months but use alot. Love it light with enough power for me. Have put bigger dogs on both sides. Great saw cheers

@julianalderson3938

Жыл бұрын

261 great aswell

I agree with you on picking the 400c over the 5oo i. I have both. 500 wears a guy out more than 400 on a long day. Just depends on what I'm doing abd how big the wood. 400 every time if I can. My go to saw.

Great video series Doug! I'd really like to try out one of those 400s.

@IndianaDoug

2 жыл бұрын

You’d love it man. I was super impressed

Well I just ordered my ms400 c today. Someone had just bought the only one they had in stock. I put my name on it when it comes in.

Good job doug

Cool

those 400s are nice

Awesome 👊 I sold my 362 when this came out but still undecided between the 400 and 462🤷‍♂️ . Nice saw👍

@IndianaDoug

2 жыл бұрын

My opinion: the 362 was a flop compared to the 361. I’ve ran different flavors of the 462, and I’d take a stock 400 over any 462.

@zack6892

2 жыл бұрын

I haven’t run a 400 yet but the 462 is one of my favorite stihl I ever have run can’t say it’s better or worst then the 400 obviously but I can say you won’t be disappointed if you go that route. I’m not necessarily even a stihl guy and I love that saw.

@andrewscott2866

2 жыл бұрын

Wow, that says a lot about that 400 Doug, I really value people's opinions because my main criteria for a saw is user experience. Both the 400 and 462 are enough saw for what I need, but its about what I'll enjoy running more. I wish a dealer around me had a demo day where I could try both side by side.

@man9170

Жыл бұрын

What do you like better about the 400 over the 462?

I’ve wanted a 400 for a while. I’ve held one, and man is it light. I know westcoastsaw makes a foam filter for it, I’d prolly add that to it.. someday.

@IndianaDoug

2 жыл бұрын

I was pleasantly surprised by this saw, little powerhouse💪🏼

You got the wifi option. That was pretty damn funny.

@IndianaDoug

Жыл бұрын

😂

I have the 261 , 362 and 400 m tronic

Hello. I have this saw and it's great. It is perfect for preparing firewood and mining - price / performance ratio.

@IndianaDoug

Жыл бұрын

Couldn't agree more!

Anyone looking for a 400, if you are in eastern ohio/ western WV area, Bridgeport equipment always has at least one in stock. That’s where I got mine. They had 2 new on the shelf yesterday at the barboursville WV location

@IndianaDoug

Жыл бұрын

Good to know👍🏻👍🏻👍🏻

G'day Indi, how the bloody hell are ya ? The 500 I is 1.3 pounds heavier than the 400C and if you're hanging onto it all day everyday and you don't need that little bit more power of the 500 you'd be silly to use it. I have a 400C max bar length in Oz is 20 inches I fitted the dogs on the bar cover for even pull, Stihl says to leave it in summer mode all year round here. If I'm cutting firewood I take the 400 for limbs and the 660 Mag for the rest , if it gets any bigger I'll use the 880 Magnum 👍.

When you want a 500 I but can’t get one or afford to spend almost 2 k for a saw when you don’t use it daily personally I love my 500 I and my 261 cm best combo in the world for all east coast wood

some day I'll have one

@IndianaDoug

2 жыл бұрын

If I were rich I’d buy you one buddy

you should get the full wrap kit

@IndianaDoug

2 жыл бұрын

Yes and the outside spike

Hebat brow 👍👍

If u find someone with a efco 6510 u need try it its on heavey side though not quite half lb less than my redmax 7100/Husqvarna 372xt I'm in Texas so ya too far for u to try my efco 6510 out

Comment 75. Mike is great, thanks for sharing this

@IndianaDoug

Жыл бұрын

Mike is awesome👍🏻👍🏻👍🏻

Does it have a plastic crankcase?

@IndianaDoug

8 ай бұрын

No, magnesium

Cut some logs. Cookies are for Girl Scouts.

@IndianaDoug

5 ай бұрын

We cut plenty.

Your going to burn that saw down

why wouldn't you go a 462 over a 400 only weighs 200grams more ?

@IndianaDoug

3 ай бұрын

Not a huge fan of the 462

Check out Hotsaws101 400 builds. Pretty freaking epic.

@IndianaDoug

2 жыл бұрын

Yes I watched his latest on the 400. That thing is an animal

M-tronic?

@IndianaDoug

Жыл бұрын

Yes

is it as disappointing as the 500 I fuel consumption

@IndianaDoug

Жыл бұрын

😆 that’s pretty hard to beat

@IndianaDoug

Жыл бұрын

Jokes aside, they aren’t nearly as bad according others I’ve talked to.

@EuroYardService

9 ай бұрын

I find The 400 pretty thirsty but have no comparison to other saws in the same range.

3rd!

@IndianaDoug

2 жыл бұрын

It should be your next saw, you’d love it!

or second?

@jerseyjoshua4818

2 жыл бұрын

Hey I'm 17th!

@IndianaDoug

2 жыл бұрын

🤣

Almost bought one. Plastic handle put me off.

@ciphercode2298

5 күн бұрын

Your loss buddy. The plastic handles hold up just as well as a hollow aluminum tube

@PhilHewkin

5 күн бұрын

@@ciphercode2298 ever got your bar pinched in a log?

@ciphercode2298

5 күн бұрын

@@PhilHewkin yup,best solution to that is to either keep another saw or at least an extra bar and chain. If you're yanking on your saw you're gonna either tear up your av mounts or break something else. Felling wedges are great for preventing bars from gettin pinched too

I can’t stand the plastic handle on them

@IndianaDoug

2 ай бұрын

Plastic?

@KAMP8505

2 ай бұрын

@@IndianaDoug yea the handle bar on it is plastic. If you buy the 462 or bigger they come with a aluminum/steel wrap handle on them. I think every pro saw should come with that especially when a 400C cost over $1,000

@IndianaDoug

2 ай бұрын

@KAMP8505 I didn’t even realize. That’s really weird.

@ciphercode2298

5 күн бұрын

​@@KAMP8505the plastic holds up just as well as a hollow aluminum tube does. If it does get broken it's not expensive to fix. The rear handles are plastic, the top shrouds are plastic,fuel tanks are plastic,the starter covers are usually plastic. It's well made and serves its purpose well

Hello Doug, just came across your channel, just subscribed 🚜🪵👍🏼🇺🇸

@IndianaDoug

2 жыл бұрын

We appreciate ya, thanks👍🏻

Subbed 👍 ya hooked up with a great guy there !! Just curious, have you auto reset your MS 362? Nice bar he has on his MS 400c 😏🪵⛓🪚👍👏 Rick

@IndianaDoug

Жыл бұрын

I appreciate ya Rick👍🏻 ya know, I tried resetting the 362 but I couldn’t tell a difference in performance. Then I heard there were different ways to do the reset. Stihl is the brand I’m least familiar with in the chainsaw world.

@Living-The-Dream

Жыл бұрын

@@IndianaDoug I also have a MS 362, love it, it runs awesome. Warm it up, leave sit for a few minutes. Place brake on and start it, place it in start position, start it, let it run for 30 seconds. Then kick brake off and run it at full throttle for 30-40 seconds. You will hear it kick down from full throttle……after the 30-40 second run at full throttle, shut it down. You should have heard and felt it reset. Please try it….you might be looking down a bit on a great saw for its weight. IMHO….👍👏 Good Luck Oh, please tell Mike I said hello 👍👋 Rick

@IndianaDoug

Жыл бұрын

I’ll try it man. Thanks! Mike is one of my favorite humans😆 will do Rick👍🏻