thanks man. you really helped me out. 2 shops wanted 80 and your video saved me 80 dollars. i owe you.

@smallengineguys

2 жыл бұрын

No problem 👍

Nice Demonstration. Just as a tip, I usually put a piece of black tape across the spool to help hold the rope in the spool. Leave a long enough tab on it that you can get your needle nose pliers on it and pull it off once you get the spool seated. and secured.

My bottom spring came off and i spent a lot of time trying to get it back on... at 3:37 exactly i can see how it goes back on correctly. Because of that i was able to repair my pull string (i could figure out the rest) Thank you so much for this video!!!'

@smallengineguys

2 жыл бұрын

Nice work!

Great job, thanks for making this video! Def helpful as I own a lawn care company! This was a quick fix! Thanks bud

@smallengineguys

Жыл бұрын

Glad it helped!

Thanks for your video help me to fix mine.

@smallengineguys

2 жыл бұрын

Glad it helped

I should have watched the whole video first. I got as far as taking the housing off and getting to the spool, but didn't hear the part about being careful not to dislodge the spring on the under side. That was fun to respool...

@smallengineguys

Жыл бұрын

yep loads of fun

Thank you very much 🙏

-thank you so much!!

Thanks. Mine ended up having a torque screw instead of a snap ring and mine also has a coil type spring instead of your coiled spring,

@smallengineguys

2 жыл бұрын

slightly different model. probably doesnt have rc at end of model number. older version i think

Thank you

@smallengineguys

2 жыл бұрын

You're welcome

Thanks man

@smallengineguys

2 жыл бұрын

No problem

Thank you just fixed mine!

@smallengineguys

2 жыл бұрын

Glad I could help!

Hey nice video but having a problem with mine not recoiling as it should. I can hear the inner spring trying to catch but still no dice 😢

@smallengineguys

2 ай бұрын

amzn.to/44N1zaE new spring time

Need to replace throttle cable on my fs56rc

YOU ROCK

Used this video to get it all together and i followed everything you said but it dont recoil on its own? Got the springs in correctly (looked at my other trimmer to be sure) and its not retracting at all

You are a god

@smallengineguys

3 ай бұрын

ive been called many things rarely god

Thanks! I couldn’t get the recoil right..

@smallengineguys

2 ай бұрын

Glad I could help!

@matthumphries7270

2 ай бұрын

Me too…

There are 2 or 3 different stihl tools, not sure if the torque ends are different or just some have flat heads.

@smallengineguys

4 ай бұрын

Always t27 or flathead

Okay - well I clearly f’d something up - I replaced the pull cord and all seemed good - started up ran for 5 min then something bad happened….. head a snap and machine shut off, found pull handle back 20 feet, took apart again and was like a bird nest in there. Cord all tanged, bottom spring snapped in two and all unsprung, plastic a bit chewed up. Any idea what happened? Maybe clip wasn’t on right so didn’t stay on post.

@smallengineguys

5 ай бұрын

I couldn't say without looking sorry

Thank you, now to find my tools, lol.

@smallengineguys

Жыл бұрын

Good luck!

What tool does it take to remove the Calin to fix the pull rope ?

@smallengineguys

Жыл бұрын

t27 amzn.to/43bvrM9

So like I put a new carburetor on mine it worked for about 3 hours changed heads on it now it want prime up. Bought a new fuel line for tank thinking it was that. Still want start. Use carburetor starter fuel and it runs. So when I'm pumping the bulb there is a lot of bubbles in tank . Can you help.

@smallengineguys

2 жыл бұрын

Fuel lines might be backwards

@Rebecca-zj5vu

2 жыл бұрын

@@smallengineguys no there are only 2 a black one on top a green one from the tank on the bottom???? I'm wondering if the green one going to the tank is not sitting all the way down?? I'm going to try again after work. I'll let you know. Thanks

@smallengineguys

2 жыл бұрын

make sure fuel filter is actually on the line and it is in the bottom of the tank. but foaming fuel when priming means your pushing air threw the filter. lines are backwards

@Rebecca-zj5vu

2 жыл бұрын

@@smallengineguys no line aren't backwards. Just didn't have the green one pushed in all the way I guess came home from work and started all over looking at things push on it again. Still wouldn't start so I sprayed started fuel in carburetor and it started I keep it running for about 15 minutes cut some grass turn it off and started again so I guess I fixed it.Ill see tomorrow when i finish cutting grass. Thanks for you input.

It's all in your mind Lil brother so alittle wind not hurting. Doo" dah"

@smallengineguys

4 ай бұрын

hot in south florida. fan stays.

Is it easy to fix?

@smallengineguys

2 жыл бұрын

yes

@Boobtube.

Жыл бұрын

if you just watched the video,you decide... Everyone has a different skill level.

Put one on stihl

My pool card is not catching to crank my motor

@smallengineguys

Жыл бұрын

bad pawls. its the dog ears inside

Wind noise is terrible

@smallengineguys

2 жыл бұрын

its a fan. its hot in south florida

@punkr0cker22

Жыл бұрын

Get over it kitty cat. He’s teaching you some things and you wouldn’t be here if you knew how to do it on your own. Get 👉👌’d buddy.