How to properly re spool a Stihl FS38 trimmer. May you please Subscribe to my Channel for more Stihl and outdoor reviews / helpful tips.
Жүктеу.....
Пікірлер: 124
@murraycowling9319 ай бұрын
I have been pulling my hair out trying to figure out how this works! Thanks mate
@user-ze6bh9is3m3 ай бұрын
This is so much easier than trying to wrap the line. So glad I found this video. Worked perfectly!! Thank You !!
@KRColson10 ай бұрын
Mother, Father! I never knew that! Man, thanks for showing this. I was one of those boneheads that manually wound up the line and then fumbled about pushing it through the holes and at the same time replacing the head and screwing it down. Duh! Thanks again! Cheers.
@davidharris3194 Жыл бұрын
Awesome!!!! And you can also feed a single 12 foot length all the way through the center of the spool and then follow your steps... I used to hate restringing, but now it's just a few minutes and I''m off.... Thank You!!!!
@necoslicer4 күн бұрын
Thanks a lot, just bought this new stihl trimmer and the booklet didn't explain how to respool, Thank You !
@philoconnell77066 ай бұрын
I was getting ready to burn the bloody thing!! Thank you job done mate. Love from Australia 🇦🇺
@timberrrteck
3 ай бұрын
Thanks Mate !!
@pierreschein840Ай бұрын
The best explanation ever !!! Thku from Belgium !!!!
@ShanePatelakis29 күн бұрын
thanks dude...the way u showed how to do it makes it so less frustrating thanks
@alexandercampobasso86642 күн бұрын
Thanks man. You should keep these types of videos going. It suits you.. 👌
@emilloffler12164 ай бұрын
Thank you brother man, I bought an FS 38 head today and was befuddled how to load the line, and this shows me clearly how. I'm going to machine the shaft of my Stihl FE 55 TO suit it, because I cannot find any new trimmer heads for it. And this FE 38 head is much easier and quicker to load the cutting line than the original FE 55 one.
@ryandecker5487 Жыл бұрын
Can also cut 12 feet and feed it all the way through when the arrows are lined up then pull until even sides then twist it until 4 inches left
@MACD4242
11 ай бұрын
Exactly. Way easier than having 2 strings
@WadjilaCherokeeX11 ай бұрын
Thanks just bought one today & your video is easy to follow so my bump feed should work with your easy to follow instructions
@Duke4ever18810 ай бұрын
I love It when a tutorial is simple and down to the point 👏🏻👏🏻👏🏻
@cassschiffer273423 күн бұрын
Yes, most clear video yet. Others I was like I can't even see what you are doing. So easy now. Thank you
@greggkathy18929 ай бұрын
I have done this wrong all my life. I feel like I just got the cure to cancer!! Thank you sir!!
@chadlugz151014 күн бұрын
Thanks man. I was doing it totally wrong. 👍🏻
@loveniacannon330210 ай бұрын
It costs a little more to have a pre-spooled line, but when you're in the middle of a trimming job kzread.infoUgkx429xwEjNPnwzQohFrURRyKF51YfOD_Du , it is so nice to just pop out the old one and pop in a new one. Love Black & Decker tools. Especially the 20-volt battery operated ones. And, as usual, it came on time. Thanks Amazon!
@julianking4793 Жыл бұрын
Brilliant and to the point. A great explanation from Canada's answer to Johhny Depp. Many thanx.
@timberrrteck
11 ай бұрын
Hahaha, heard that my whole life ... thanks for watching
@WadjilaCherokeeX
11 ай бұрын
That is exactly what I heard as well
@westscotian Жыл бұрын
Thank you so much for the clear explanations and detailed video explaining what has been such a challenge previously. My FS38 is ready for action and all thanks to you! Searching now if you did a chain saw sharpening video or two…. Keep it up, you rock!
@timberrrteck
Жыл бұрын
Thank you !! I can make one of those too :) NP
@Robochop-vz3qm10 ай бұрын
Just bought the Fs38 and the guy showed me in the store how to re thread, but I needed a refresher. Thanks 👍
@brandon.turner Жыл бұрын
Dude you just saved me so much time haha. Awesome video dude!! Thanks
@timberrrteck
11 ай бұрын
glad it helped, thanks for watching :)
@kajola11 ай бұрын
This was the best video today., and you should know that today I watched reviews for the new mission impossible. Thanks from Sweden
@Neveragainnnn8 ай бұрын
FINALLY!!!! Now I gotta go out and dig it outta the trash….CHEERS MATE!
@infamousftfw Жыл бұрын
Just wanted to say thank you! I forget almost every year. I only have to weed whack 3-4 times a year. Thanks again! Also little tip I was told by another guy was, get your length you need (12 feet 15 feet etc.) Cut it a single length then feed it into both sides. Then go from there and when you get to the end you make your final cut and It should be even!
@timberrrteck
6 ай бұрын
Thank you
@Dibble0710 ай бұрын
Brilliant, just got one of these second hand and from what I was used to on other cheaper brands this is chalk and cheese, don’t even know what the other methods were you were taking about but this is gold
@coma35508 ай бұрын
You're a Legend bud, Cheers.
@lukecarnell20995 ай бұрын
Thankyou soooo much this video is exactly what you need... short to the point and shows you exactly how to get it done ✔️
@iam_flynn16119 ай бұрын
friggin well done bud! More importantly, Well done and TO THE POINT!!
@calvinepp3779 Жыл бұрын
That’s friggin awsome thanks man.
@beautifulnewzealandcom11 ай бұрын
I bought this head because of your video - thanks mate for your clear instructions cheers Darren
@m.a.s.27747 ай бұрын
In 4min 31 sec you just confirmed to me something that I've been doing the hard way (wrong) for 18 years. 😬
@SM-im8lt Жыл бұрын
Bro I feel like the only way I can repay you is with a damn blowie 😂. You just saved me so much hassle… thank you, thank you, thank you!
@timberrrteck
11 ай бұрын
Hahajaha a subscribe is just fine my friend , glad it helped.
@user-pv5xd3ch1x2 ай бұрын
Thanks from new caledonia !
@beaner2907 Жыл бұрын
I have exactly the same weed eater with the same head and this works great. However, me and bump feed don't seem to be on the same wave length so every time it's out of string I have to take it all apart and do this method all over again. It's a love/hate relationship that's really leaning more to the hate side.
@timberrrteck
11 ай бұрын
When you bump it , try to do it on a hard surface at full throttle 😊
@ngfarmer3 ай бұрын
thanks buddy! you saved me ages trying to figure out how to do this :)
@dylanwilson30576 ай бұрын
Thank you sir! I was about to throw my trimmer off a bridge.
@soundbeings1 Жыл бұрын
Who knew a full faced Johnny Depp was doing youtube trimmer info mercials!!! Thanks my friend - from NS Canada!!
@timberrrteck
8 ай бұрын
Hahaha thanks
@petermatthews1242Ай бұрын
You are a God , thank you so so much❤
@danieljoy750410 ай бұрын
This is great. My issue after purchasing a brand new one on Friday. Is getting the thing to feed more line out. I'll put new line in before the next use and see if i do it like this it feeds out better.
@RustingVagina
6 ай бұрын
I have the exact same problem, did u find a fix by any chance?
@johnsin38438 күн бұрын
OK, I am going to try this next time I load. I will get back to you. I am back, unfortunately this does not work with tap feed but perhaps after inserting the line into the holes in the spool it may be easier to load
@newearthtimber6 ай бұрын
Great explanation!
@theronneal2 ай бұрын
Damn man I've been looking like crazy, thank you💯 I have a 40 trimmer
@bd90458 ай бұрын
You are the man! Perfect vid. And I loved your performance in Blow!
@jacobgale2518 Жыл бұрын
just want to let you know how you helped me so much thank you
@skiingiswhereitsat10 ай бұрын
Best video ever!
@krzysztofkozowski931Ай бұрын
Thank's!!!! Great job!!!👍👍👍
@StezNation4 ай бұрын
Thank you. This helped alot and actually made sense
@joegallo838326 күн бұрын
SORRY TIMBERRR, Please update this video. The whole idea of this head is simplicity. You DO NOT have to take the head off or apart to recline it, You DO NOT have to cut the line in half (you feed the line (12-15 feet, 2mm or .080” or you can use 2.4mm or .095” but of course shorter) RIGHT THROUGH the HEAD (with the arrows lined up) till it comes out the other side then pull it until equal lengths then wind according to the arrows on the head
@jesusalvarado77911 ай бұрын
Thank you very much bro work really good
@dwayneharris3874 Жыл бұрын
Thanks for the tutorial. It clarified a few things for me. I like your way of measuring 6 feet. We used that at a lumber mill I worked at in the early '70s. I measure my string trimmer line that way still.
@proglitchgamer1879 Жыл бұрын
life saver fr thanks for the video
@sanchochulo11 ай бұрын
Just wanted to say thank you 🙏🏾 Never had anyone teach me how to do this growing up. Now I’ll be able to teach my kids how to do this 💯 #vjpollito
@ddaa259 ай бұрын
Finally thank u 😢🇹🇹👈🏾👊🏿
@MikeXeX Жыл бұрын
Nice one mate appreciate it
@johanfrithiofsson43813 күн бұрын
Thanks bro 🔥🔥
@vanillaquicksand8025Ай бұрын
Thank you for explaining the size inch of line needed🤦🏻♀️
@glenrichards71754 ай бұрын
Great video, the owners manual doesn't show this, which is strange, thanks
@arcpuffin10 ай бұрын
Would’ve been nice if you showed how you unscrewed the unit. That was the only thing you did off camera and the ONLY thing I needed to know. Mine will not screw off
@Tanus111Ай бұрын
it helps ! thanks Brother!
@michaelazoulay773611 ай бұрын
Excellent.thanks man,
@garettkelliher1868Ай бұрын
I knew Jonny Depp was more than just an actor
@RK74189Ай бұрын
Thank you so much !
@30pvfd Жыл бұрын
Dam too easy thanks for video 👍
@MaureenLeeful Жыл бұрын
It worked - terrific!
@bukoovibess.269310 ай бұрын
Love the video! Still having trouble bumping head on a hard surface. I usually lift it up when it idles an just twist the head for more string then put it back down. Any tutorials on how to bump its head an extend line trimmer wire?
@nickdavis3345 Жыл бұрын
You just saved my ass mate thanks!
@danieljordan719410 ай бұрын
Good video😎👍
@miramigacz2249Ай бұрын
Thenks men 🙏
@Mrjlv9090 Жыл бұрын
Thanks for your help
@jamesluke9969 Жыл бұрын
How easy is that! Thank you!
@TylerIrelan-ci6em10 ай бұрын
Any other tips for the fs 38? I hear theres a couple spots you can grease but ya gotta know where
@ClarissaNson10 ай бұрын
This doesn't work for my weed eater. Mine is the fs38 as well but mine doesn't have the white top like yours does though so I'm wondering if that has something to do with it.
@SolidNate99 Жыл бұрын
Can someone tell me how to feed it more wire as you're trimming? Does this happen automatically? I know on my honda trimmer, I would kinda smack the bottom of the head (the circular piece) against the pavement or grass kinda lightly and then more line would come out.
@TheMaxy4u
Жыл бұрын
Same way in this one
@TylerIrelan-ci6em10 ай бұрын
I'm confused are so the basic Stihl trimmer has an ez feed stock or that is the ez feed system. I'm used to running it all the way through one string pull the ends together then wind up. I'm just curious cuz I don't want to spend 40$ on an auto cut head . Just bought a fs 38 online. I'll find out tomorrow. Either way great video bud . Nailed it
@HenkWielinkАй бұрын
Thanks a lot.
@mariagibbs-irelan8788Ай бұрын
That is a different head than mine came with. Mine has the standard black one . I did find a hack to make it quick. I miss my ez feed you run one 10-12' string all the way through pull the ends together stop . And wind em up
@franklauriekranitsky278210 ай бұрын
Thanks for the video! I've been a Stihl tech at Ace Hardware for about 7 years. That trimmer head is fed by one ten foot piece of line fed all the way through the head leaving 5 feet on each end and then winding it up. Is that head different? The FS 38's that we get don't come with that head. Was that added or did that come with the unit? Thanks!
@timberrrteck
8 ай бұрын
It came this way.in Canada
@andrewchaney24210 ай бұрын
Can anyone tell me mine always starts out doing well but ends up stop feeding seems like it gets stuck
@emmanuelzapata84 ай бұрын
Congratulations
@wbrucefehr283210 ай бұрын
What is the thickest string that this FS38 can handle ? Thanks
@KRColson10 ай бұрын
Well, I just went out to try it out and my spool isn't like yours. I do have a Stihl FS38 but the head assembly looks different. There are no triangles to line up.
@danb505810 ай бұрын
Thanks bud
@Jamiek4854 күн бұрын
Are you sure it’s an FS 38 and not an FS 40? That head must be an upgrade, mine has a manual head vs. speed head.
@IvanPavlov8 ай бұрын
I’ve been doing it the stupid way for about 4 years.
@colehastings399227 күн бұрын
LIFESAVER
@lazarusblackwell6988 Жыл бұрын
I dont get it. On other videos this same head is spooled differently. On other vids the line goes straight through two holes and then wind it up. On this vid the line doesnt go through both.
@cden8718 Жыл бұрын
FREAKIN' THANK YOU
@christiaanbarnard24513 ай бұрын
Bru... Mind blown.
@ryanptimleck Жыл бұрын
When did Johnny Depp start trimming lawns?
@timberrrteck
8 ай бұрын
Lol
@stuj896 ай бұрын
Get the f@$# out of here! You have just saved 3 days of my life! Absolute legend
@nicoleb66219 ай бұрын
My spool looks different and it won’t spin like yours does.
@Fitmomgretch21 күн бұрын
Single mom here… how do I get the cap off? All these videos already have it off or say “like you always do” 😂
@nosferatu3475Ай бұрын
Is this the Walmart version of Jonny Depp lmao 🤣
@milanbalaz5053Күн бұрын
👍👍👍🇸🇰🇸🇰🇸🇰😀😀😀
@renaissance1728 күн бұрын
Mine doesn’t have a Spring
@juliebannon23885 күн бұрын
Fucking Thankyou 😅
@brandonkinzler3188 Жыл бұрын
Also clean your trimmer I’m guessing your in the middle of trimming so not hating
@Drone256 Жыл бұрын
They made some FS 38 trimmers entirely different. This will not work on all of them. Doesn't even come close to describing mine. *sigh*.
@timberrrteck
Жыл бұрын
I'm really sorry this didn’t work for you, My apologies.
@grantdavis9536 ай бұрын
This seriously shits me. I get about 30 seconds out of my line before it disappears into the spool requiring me to do it again. WTF am I doing wrong?
Пікірлер: 124
I have been pulling my hair out trying to figure out how this works! Thanks mate
This is so much easier than trying to wrap the line. So glad I found this video. Worked perfectly!! Thank You !!
Mother, Father! I never knew that! Man, thanks for showing this. I was one of those boneheads that manually wound up the line and then fumbled about pushing it through the holes and at the same time replacing the head and screwing it down. Duh! Thanks again! Cheers.
Awesome!!!! And you can also feed a single 12 foot length all the way through the center of the spool and then follow your steps... I used to hate restringing, but now it's just a few minutes and I''m off.... Thank You!!!!
Thanks a lot, just bought this new stihl trimmer and the booklet didn't explain how to respool, Thank You !
I was getting ready to burn the bloody thing!! Thank you job done mate. Love from Australia 🇦🇺
@timberrrteck
3 ай бұрын
Thanks Mate !!
The best explanation ever !!! Thku from Belgium !!!!
thanks dude...the way u showed how to do it makes it so less frustrating thanks
Thanks man. You should keep these types of videos going. It suits you.. 👌
Thank you brother man, I bought an FS 38 head today and was befuddled how to load the line, and this shows me clearly how. I'm going to machine the shaft of my Stihl FE 55 TO suit it, because I cannot find any new trimmer heads for it. And this FE 38 head is much easier and quicker to load the cutting line than the original FE 55 one.
Can also cut 12 feet and feed it all the way through when the arrows are lined up then pull until even sides then twist it until 4 inches left
@MACD4242
11 ай бұрын
Exactly. Way easier than having 2 strings
Thanks just bought one today & your video is easy to follow so my bump feed should work with your easy to follow instructions
I love It when a tutorial is simple and down to the point 👏🏻👏🏻👏🏻
Yes, most clear video yet. Others I was like I can't even see what you are doing. So easy now. Thank you
I have done this wrong all my life. I feel like I just got the cure to cancer!! Thank you sir!!
Thanks man. I was doing it totally wrong. 👍🏻
It costs a little more to have a pre-spooled line, but when you're in the middle of a trimming job kzread.infoUgkx429xwEjNPnwzQohFrURRyKF51YfOD_Du , it is so nice to just pop out the old one and pop in a new one. Love Black & Decker tools. Especially the 20-volt battery operated ones. And, as usual, it came on time. Thanks Amazon!
Brilliant and to the point. A great explanation from Canada's answer to Johhny Depp. Many thanx.
@timberrrteck
11 ай бұрын
Hahaha, heard that my whole life ... thanks for watching
@WadjilaCherokeeX
11 ай бұрын
That is exactly what I heard as well
Thank you so much for the clear explanations and detailed video explaining what has been such a challenge previously. My FS38 is ready for action and all thanks to you! Searching now if you did a chain saw sharpening video or two…. Keep it up, you rock!
@timberrrteck
Жыл бұрын
Thank you !! I can make one of those too :) NP
Just bought the Fs38 and the guy showed me in the store how to re thread, but I needed a refresher. Thanks 👍
Dude you just saved me so much time haha. Awesome video dude!! Thanks
@timberrrteck
11 ай бұрын
glad it helped, thanks for watching :)
This was the best video today., and you should know that today I watched reviews for the new mission impossible. Thanks from Sweden
FINALLY!!!! Now I gotta go out and dig it outta the trash….CHEERS MATE!
Just wanted to say thank you! I forget almost every year. I only have to weed whack 3-4 times a year. Thanks again! Also little tip I was told by another guy was, get your length you need (12 feet 15 feet etc.) Cut it a single length then feed it into both sides. Then go from there and when you get to the end you make your final cut and It should be even!
@timberrrteck
6 ай бұрын
Thank you
Brilliant, just got one of these second hand and from what I was used to on other cheaper brands this is chalk and cheese, don’t even know what the other methods were you were taking about but this is gold
You're a Legend bud, Cheers.
Thankyou soooo much this video is exactly what you need... short to the point and shows you exactly how to get it done ✔️
friggin well done bud! More importantly, Well done and TO THE POINT!!
That’s friggin awsome thanks man.
I bought this head because of your video - thanks mate for your clear instructions cheers Darren
In 4min 31 sec you just confirmed to me something that I've been doing the hard way (wrong) for 18 years. 😬
Bro I feel like the only way I can repay you is with a damn blowie 😂. You just saved me so much hassle… thank you, thank you, thank you!
@timberrrteck
11 ай бұрын
Hahajaha a subscribe is just fine my friend , glad it helped.
Thanks from new caledonia !
I have exactly the same weed eater with the same head and this works great. However, me and bump feed don't seem to be on the same wave length so every time it's out of string I have to take it all apart and do this method all over again. It's a love/hate relationship that's really leaning more to the hate side.
@timberrrteck
11 ай бұрын
When you bump it , try to do it on a hard surface at full throttle 😊
thanks buddy! you saved me ages trying to figure out how to do this :)
Thank you sir! I was about to throw my trimmer off a bridge.
Who knew a full faced Johnny Depp was doing youtube trimmer info mercials!!! Thanks my friend - from NS Canada!!
@timberrrteck
8 ай бұрын
Hahaha thanks
You are a God , thank you so so much❤
This is great. My issue after purchasing a brand new one on Friday. Is getting the thing to feed more line out. I'll put new line in before the next use and see if i do it like this it feeds out better.
@RustingVagina
6 ай бұрын
I have the exact same problem, did u find a fix by any chance?
OK, I am going to try this next time I load. I will get back to you. I am back, unfortunately this does not work with tap feed but perhaps after inserting the line into the holes in the spool it may be easier to load
Great explanation!
Damn man I've been looking like crazy, thank you💯 I have a 40 trimmer
You are the man! Perfect vid. And I loved your performance in Blow!
just want to let you know how you helped me so much thank you
Best video ever!
Thank's!!!! Great job!!!👍👍👍
Thank you. This helped alot and actually made sense
SORRY TIMBERRR, Please update this video. The whole idea of this head is simplicity. You DO NOT have to take the head off or apart to recline it, You DO NOT have to cut the line in half (you feed the line (12-15 feet, 2mm or .080” or you can use 2.4mm or .095” but of course shorter) RIGHT THROUGH the HEAD (with the arrows lined up) till it comes out the other side then pull it until equal lengths then wind according to the arrows on the head
Thank you very much bro work really good
Thanks for the tutorial. It clarified a few things for me. I like your way of measuring 6 feet. We used that at a lumber mill I worked at in the early '70s. I measure my string trimmer line that way still.
life saver fr thanks for the video
Just wanted to say thank you 🙏🏾 Never had anyone teach me how to do this growing up. Now I’ll be able to teach my kids how to do this 💯 #vjpollito
Finally thank u 😢🇹🇹👈🏾👊🏿
Nice one mate appreciate it
Thanks bro 🔥🔥
Thank you for explaining the size inch of line needed🤦🏻♀️
Great video, the owners manual doesn't show this, which is strange, thanks
Would’ve been nice if you showed how you unscrewed the unit. That was the only thing you did off camera and the ONLY thing I needed to know. Mine will not screw off
it helps ! thanks Brother!
Excellent.thanks man,
I knew Jonny Depp was more than just an actor
Thank you so much !
Dam too easy thanks for video 👍
It worked - terrific!
Love the video! Still having trouble bumping head on a hard surface. I usually lift it up when it idles an just twist the head for more string then put it back down. Any tutorials on how to bump its head an extend line trimmer wire?
You just saved my ass mate thanks!
Good video😎👍
Thenks men 🙏
Thanks for your help
How easy is that! Thank you!
Any other tips for the fs 38? I hear theres a couple spots you can grease but ya gotta know where
This doesn't work for my weed eater. Mine is the fs38 as well but mine doesn't have the white top like yours does though so I'm wondering if that has something to do with it.
Can someone tell me how to feed it more wire as you're trimming? Does this happen automatically? I know on my honda trimmer, I would kinda smack the bottom of the head (the circular piece) against the pavement or grass kinda lightly and then more line would come out.
@TheMaxy4u
Жыл бұрын
Same way in this one
I'm confused are so the basic Stihl trimmer has an ez feed stock or that is the ez feed system. I'm used to running it all the way through one string pull the ends together then wind up. I'm just curious cuz I don't want to spend 40$ on an auto cut head . Just bought a fs 38 online. I'll find out tomorrow. Either way great video bud . Nailed it
Thanks a lot.
That is a different head than mine came with. Mine has the standard black one . I did find a hack to make it quick. I miss my ez feed you run one 10-12' string all the way through pull the ends together stop . And wind em up
Thanks for the video! I've been a Stihl tech at Ace Hardware for about 7 years. That trimmer head is fed by one ten foot piece of line fed all the way through the head leaving 5 feet on each end and then winding it up. Is that head different? The FS 38's that we get don't come with that head. Was that added or did that come with the unit? Thanks!
@timberrrteck
8 ай бұрын
It came this way.in Canada
Can anyone tell me mine always starts out doing well but ends up stop feeding seems like it gets stuck
Congratulations
What is the thickest string that this FS38 can handle ? Thanks
Well, I just went out to try it out and my spool isn't like yours. I do have a Stihl FS38 but the head assembly looks different. There are no triangles to line up.
Thanks bud
Are you sure it’s an FS 38 and not an FS 40? That head must be an upgrade, mine has a manual head vs. speed head.
I’ve been doing it the stupid way for about 4 years.
LIFESAVER
I dont get it. On other videos this same head is spooled differently. On other vids the line goes straight through two holes and then wind it up. On this vid the line doesnt go through both.
FREAKIN' THANK YOU
Bru... Mind blown.
When did Johnny Depp start trimming lawns?
@timberrrteck
8 ай бұрын
Lol
Get the f@$# out of here! You have just saved 3 days of my life! Absolute legend
My spool looks different and it won’t spin like yours does.
Single mom here… how do I get the cap off? All these videos already have it off or say “like you always do” 😂
Is this the Walmart version of Jonny Depp lmao 🤣
👍👍👍🇸🇰🇸🇰🇸🇰😀😀😀
Mine doesn’t have a Spring
Fucking Thankyou 😅
Also clean your trimmer I’m guessing your in the middle of trimming so not hating
They made some FS 38 trimmers entirely different. This will not work on all of them. Doesn't even come close to describing mine. *sigh*.
@timberrrteck
Жыл бұрын
I'm really sorry this didn’t work for you, My apologies.
This seriously shits me. I get about 30 seconds out of my line before it disappears into the spool requiring me to do it again. WTF am I doing wrong?
3:50 - 4:00 🤦♂️