why does it look so easy? 😭 my success rate is 4/20 😢

@DRLZEca

5 ай бұрын

Me too lol been at it for months might go back to how i did it before. dont wanna keep wasting my sheets

@buttercupgrove

3 ай бұрын

same mine ends up with so many bubbles that I can't get out ;-;

@xX_ang3Lz

22 күн бұрын

i work at a print shop, one way to do it is squeegee down the middle as you pull the paper. that way it's flat in at least one area. even if it wrinkles it's better to lose 1 or 2 stickers than a whole sheet. always overlap squeegee stroke in a straight line pushing air outwards

Bro!!! You are a lifesaver!!! I have same type of paper and I printed directly on it thinking I just did that and cut it then read laminate your sticker before putting in I had no idea. This video was perfect!!! Thank you so much!!! Gonna try again

THIS IS EXACTLY WHAT I WAS LOOKING FOR TYSM!!! I'm gonna try this now :)

i wish i found this earlier, now im doing them perfect :,3

You should cut it down to size so it fits INSIDE the registration marks. Ive heard of the sensor not working right when the reg. marls are too glossy or obstucted

@meejay100

8 ай бұрын

There are fixes for this, some people put tape matte tape along the lines of the reg marks, some people put tape over the sensors, but if you have a cricut maker 3 and you select holographic, sometimes it’s okay, other times you may have to kinda stay in front of the light to make sure there is no reflection. Although not ideal, it’s still fine to do this.

@The505productions

8 ай бұрын

@@meejay100 yes I'm aware of the bandaids. But why set your self up to possibly fail, when an extra 10 seconds of cutting the sheet slightly smaller will ensure 0 problems?

@meejay100

8 ай бұрын

@@The505productions I am not not disagreeing with that point. A few extra secs to make life easier. But it is also good to make people aware that there are other methods too for fixes incase they did not do this. Or in the case of glossy stickers, the cricut would find it difficult regardless of how you apply the laminate. What’s interesting is that some other vinyl cutters do not have this issue at all. Which I am planning on investing in, eventually.

@Liv1nMohawk

2 ай бұрын

It's not a Cricut or silhouette, the machine can read the registration or you can even do it manually. I use a siser Juliet which is very similar to the machine he's using.

the sensor doesn't read the black lines when you overlay the whole page though.

does anyone know where i can find that kind of sheet

Can the sheets be heated up?

Mine has bubbles every time even after smoothing it like he did 😢

So bro i did this but the censor cant detect it

Bless! Exactly what I needed!

@pabailon8799

7 ай бұрын

I’m new to this; like day two and less than 24hrs of getting my first ever cricut; I feel so lucky of having come across this 🙏 god is real and he is a perv cause he must watching 😬

@user-gk9ut9qc1o

7 ай бұрын

@@pabailon8799 xdd don't say that, He will hear you!

Love this!!!

Cool thanks !!

Thank you! 🥹

You make it look so easy 😭

how abt the finger print?

where did you find that laminate sheet i like the glow effect

Thank you😊

Thank you!!!!! I was becoming so frustrated!

What is the name of product

1. Genius I've been doing it for months now 2. U should wait or at least REALLY MAKE SURE the ink is completely dry or you'll smudge and ruin Good material

Is this a cold laminate film or is there a regular laminate that is neither cold or hot? Because I’ve been wondering if I need to buy a machine for a cold laminate

Does laminating your stickers save the hassle of having to wait for the ink to dry on the paper or do you still need to wait for the ink to dry ?

why does mine still come out crooked? 😩

Can you tell Where to buy the sheet please

@gemmalypotter

Жыл бұрын

X2

@cindygarcia3559

10 ай бұрын

I’ve used the ones from amazon ☺️

what do you use? I use avery and its bubbles every freaking time! no matter what?! what paper and laminate do you use!?

@cjlee2945

11 ай бұрын

and its not scratch proof!!

I wish it was that easy for me

@adlygaray351

10 ай бұрын

Same!!! I already waisted about 5 🙃

It's going to take some practice for me. But the general idea is working. Learning game I suppose.