Step by Step Weblogic Server Clustering Part -2 : via Admin Console
Step by Step Weblogic Server Clustering Part -2 : via Admin Console
Жүктеу.....
Пікірлер: 24
@user-mc4hp7yy9r6 ай бұрын
very nice explanation sir super super
@scr_scr2 жыл бұрын
Thank you bro very clear
@atriarian Жыл бұрын
@hemanthgowtham44632 жыл бұрын
Good
@PANTHERSARMYGAMING2 жыл бұрын
Thank you nice explain I have setup as you show in the video but when i start managed server 2 is goes to Fail_Not restartable state as logs are updating on node 2
@digitak.middleware
Жыл бұрын
You have missed some configuration, there could be multiple reasons. Check if you mentioned correct listen address and port on both machines and oracle home and domain path same on both hosts
@salmanraza52237 ай бұрын
Hi, how to access application in a cluster, via manage server IPs? or is there option to configure cluster IP (Connecting both manager server 1 and 2)
@digitak.middleware
7 ай бұрын
You have to access direct I.p/dns of each managed server like managed-server-host:managed-server-port/context of application
@user-mc4hp7yy9r7 ай бұрын
so if we copy managed server1 to node2 by using pack command we can havems1 and ms2 in node2 but how can we have ms2and ms1 in node1 ?
@digitak.middleware
7 ай бұрын
Domain is copied on each host using pack and unpack, and then respective managed servers start on each respective host.
@scr_scr Жыл бұрын
when i tried to start nodemanager in node 2 it is getting start but it is not able to communicate to node1 still inactive status in console
@digitak.middleware
Жыл бұрын
Check if the correct i.p and port assigned to your node 2 machine.
@user-mc4hp7yy9r9 ай бұрын
we installed weblogic in both nodes and created admin and ms1 in node1 and ms2 in node2 they can run but why should we copy entire domain in to node2?
@digitak.middleware
9 ай бұрын
Because your ms2 is running on node 2. You have to install weblogic on each node and then similarly need domain on each node
@user-mc4hp7yy9r
9 ай бұрын
if you copy domain two ms servers and admin server also will copy right so why should we create ms2 in node2?@@digitak.middleware
@user-mc4hp7yy9r8 ай бұрын
if we want to add admin server in to cluster how can we add ? which configuration we need to add ?
@digitak.middleware
8 ай бұрын
Admin server is a singleton service, that means each domain has only one admin server, so no admin server cluster
@user-mc4hp7yy9r7 ай бұрын
1. if we want enable admin port what what is the process we need to perform ? 2. what is the functionality to open the admin port , what is the procedure ? 3.we can have listening port , admin port and https port so what is the functionality to open administration port what is the procedure sir this question is asked by one of the interviewers to me i did't understand this please explain
@digitak.middleware
7 ай бұрын
By default administration port is disabled. You can enable it from console (click on domain name and select option to enable). Administration port separates the weblogic internal traffic from application traffic. That means the communication between admin and managed traffic will happen through the admin port. You will not be able to access the admin Console port like 7001 (which is default). It works on SSL so make sure to enable ssl for weblogic and for node manager as well. And you have to modify all of your scripts and applications for administration port and t3s & https protocol
@shambhuprasad1622 жыл бұрын
how to start ms2 server which is configured on node 2
@digitak.middleware
2 жыл бұрын
You can start from weblogic admin console if node manager is configured and running on node2.
@shambhuprasad162
2 жыл бұрын
@@digitak.middleware node manager 2 is running on node 2 So whats the process to start the node manager on 2nd instance and why did u keep 5556 same port to both nodemanager
@digitak.middleware
2 жыл бұрын
Same port because both are on different nodes, node 1 and node 2. remote managed server control by remote node manager and for that you will have to create two machine from admin console. 1 machine for node1, and 2nd for node 2. To machine 1 give i.p of node 1 and to machine 2 give i.p of node 2.
Пікірлер: 24
very nice explanation sir super super
Thank you bro very clear
Good
Thank you nice explain I have setup as you show in the video but when i start managed server 2 is goes to Fail_Not restartable state as logs are updating on node 2
@digitak.middleware
Жыл бұрын
You have missed some configuration, there could be multiple reasons. Check if you mentioned correct listen address and port on both machines and oracle home and domain path same on both hosts
Hi, how to access application in a cluster, via manage server IPs? or is there option to configure cluster IP (Connecting both manager server 1 and 2)
@digitak.middleware
7 ай бұрын
You have to access direct I.p/dns of each managed server like managed-server-host:managed-server-port/context of application
so if we copy managed server1 to node2 by using pack command we can havems1 and ms2 in node2 but how can we have ms2and ms1 in node1 ?
@digitak.middleware
7 ай бұрын
Domain is copied on each host using pack and unpack, and then respective managed servers start on each respective host.
when i tried to start nodemanager in node 2 it is getting start but it is not able to communicate to node1 still inactive status in console
@digitak.middleware
Жыл бұрын
Check if the correct i.p and port assigned to your node 2 machine.
we installed weblogic in both nodes and created admin and ms1 in node1 and ms2 in node2 they can run but why should we copy entire domain in to node2?
@digitak.middleware
9 ай бұрын
Because your ms2 is running on node 2. You have to install weblogic on each node and then similarly need domain on each node
@user-mc4hp7yy9r
9 ай бұрын
if you copy domain two ms servers and admin server also will copy right so why should we create ms2 in node2?@@digitak.middleware
if we want to add admin server in to cluster how can we add ? which configuration we need to add ?
@digitak.middleware
8 ай бұрын
Admin server is a singleton service, that means each domain has only one admin server, so no admin server cluster
1. if we want enable admin port what what is the process we need to perform ? 2. what is the functionality to open the admin port , what is the procedure ? 3.we can have listening port , admin port and https port so what is the functionality to open administration port what is the procedure sir this question is asked by one of the interviewers to me i did't understand this please explain
@digitak.middleware
7 ай бұрын
By default administration port is disabled. You can enable it from console (click on domain name and select option to enable). Administration port separates the weblogic internal traffic from application traffic. That means the communication between admin and managed traffic will happen through the admin port. You will not be able to access the admin Console port like 7001 (which is default). It works on SSL so make sure to enable ssl for weblogic and for node manager as well. And you have to modify all of your scripts and applications for administration port and t3s & https protocol
how to start ms2 server which is configured on node 2
@digitak.middleware
2 жыл бұрын
You can start from weblogic admin console if node manager is configured and running on node2.
@shambhuprasad162
2 жыл бұрын
@@digitak.middleware node manager 2 is running on node 2 So whats the process to start the node manager on 2nd instance and why did u keep 5556 same port to both nodemanager
@digitak.middleware
2 жыл бұрын
Same port because both are on different nodes, node 1 and node 2. remote managed server control by remote node manager and for that you will have to create two machine from admin console. 1 machine for node1, and 2nd for node 2. To machine 1 give i.p of node 1 and to machine 2 give i.p of node 2.
Thank you bro very clear