Very good in-depth and informative! I just received a K10 and was looking for a decent walk through of this kit, your video was the only one I could sit through!

@WeissRC

Жыл бұрын

Wow, I really appreciate the kind words! Just trying to be as helpful and straightforward as possible, so I'm glad people are finding it useful! 😁👌

Excellent walkthrough; I stopped reading the Traxxas instructions and used this to install my lights. Thanks!

@WeissRC

8 ай бұрын

Glad you found it helpful sir! 😎👊 Really appreciate the kind words! 😁

Great instruction. Those light kits are awesome.

@WeissRC

Жыл бұрын

Thank you sir, very much appreciate the comment! 😁👌

Love this stuff always looking forward to your next episode, Aaron 👍👍

@WeissRC

10 ай бұрын

Thank you Aaron, I really appreciate that! Trying to get back to cranking out more videos! It's just been a super busy summer! Haha. Thanks for watching! 😎🤘

It's a good installation video Friend! That was a perfect job.😀

@WeissRC

Жыл бұрын

Thank you sir, very much appreciated!! 😁😎👌

Your video was very helful for installation the Light Kit. Thank's a lot. Dears Peter

@WeissRC

10 ай бұрын

Anytime Peter! 😎👊 Thank you for the kind words. I'm glad people are finding it helpful! 😁

I installed the same kit on my K10 a few months ago, Traxxas stuff is expensive, but it works so well with their products, and the cheap kits don’t have all the features of this one , good video 👍

@WeissRC

Жыл бұрын

Thanks Ryan, really appreciate it! 😎👊 Completely agree on the assessment of traxxas and their compatibility. 😜

excellent video my friend, this kit looks so amazing 😍

@WeissRC

Жыл бұрын

Thank you Nick! 😁 Definitely liking it so far! 😎🤙

this is a super RC car. great build, dude.

@WeissRC

Жыл бұрын

Thank you sir, very much appreciated! 😎👊

@G9RCCar

Жыл бұрын

@@WeissRC you're welcome my friend

Wow thats an impressive light set up 😀👍👍👍😎😎

@WeissRC

Жыл бұрын

Thank you sir! 😁😎👊

Wonderful content. thanks for sharing.have a good day!❤👍

@WeissRC

Жыл бұрын

Thank you for the kind comment! 😁 Hope you have a wonderful day as well! 😄

I'm pick up the K5 this Friday (on release date) and have ordered a bunch of stuff for it, including the light kit, this is gonna help SO MUCH.

@WeissRC

Жыл бұрын

Awesome man, you're gonna love it!! 😎😁👌

@minnesotacowboyup6549

Жыл бұрын

@@WeissRC I bet I will, been watching videos about it, I'm fairly new to rc. I've got one other (SCX6) and I've enjoyed playing around with it.

@WeissRC

Жыл бұрын

@Minnesota cowboy up my friend has an SCX6 and loves it! 🤙 Repairs can be a little more expensive, due to the size of the vehicle.

@minnesotacowboyup6549

Жыл бұрын

@@WeissRC Yes they can, but come on.. 1/6 scale, go big or go home...lol

@WeissRC

Жыл бұрын

@Minnesota cowboy up hell yeah man! I have a 1/5 scale Kraton 8S, so I know what you mean. 😜😂

Awesome job installing this light kit. I have this kit on the way. Thanks

@WeissRC

11 ай бұрын

Great to hear sir! I think you will enjoy it. 😁 Thank you for the comment and I hope you found the video helpful! 😎🤘

@nwirc

10 ай бұрын

@@WeissRC I just installed my k10 pro scale light kit up the same way you did using the maxx link cable and the jumper lead. Everythings works fine but I don't get turn signals or brake lights. Even in the app I can't get the brakes to work. running lights are fine. What do you think the problem is.

@WeissRC

10 ай бұрын

@nwirc this happened to me! In my case it was the main distribution block (block that attaches to the chassis). 👍

@nwirc

10 ай бұрын

@@WeissRC I got my roll bar lights to work just like your headlights on the module and got my rock lights to work on the distribution block. The Mode button works as it should but the Signal button only works when I press and hold it and it only cycles through the modes of all the lights. I can't deactivate or reactivate the blinker mode. Was this the same case of your distribution block? Sorry brother but this is so aggravating lol.

great vid mate...perfect clean job keep going dude😍

@WeissRC

Жыл бұрын

Thank you sir, much appreciated! 😎👌 Hopefully this helps someone out. 👍👍

@g.bjumpsbashing3062

Жыл бұрын

@@WeissRC for sure mate..keep going🏅

Nice video. I needed to see how this was done. I have F150 and kits are sold out everywhere. So I pieced together 2 older Bronco kits to get everything I needed until I saw your video and see what I needed. Bracket on body and reverse lights! Thanks

@WeissRC

Жыл бұрын

You're very welcome Jeff, glad I could help someone! Piecing together 2 Bronco kits works too! 😜

@stevenw1005

11 ай бұрын

I too have the F-150, and I ran into a couple of issues. The Blazer kit is pretty much the same as the one for the F-150. Great video! It answered the questions I had. I do better with hands on than reading from a manual.

@WeissRC

11 ай бұрын

@stevenw1005 thank you Steven, I really appreciate that! I'm glad so many people are finding it helpful... that was the intent! 😁🤘

@jasonhopper2223

3 ай бұрын

​@WeissRC so this will fit the F150 high trail also or do I need to buy it's own kit? Appreciate the help.

@jeffmackovitch9987

3 ай бұрын

@@jasonhopper2223 I had to get a different mounting bracket so ended up piecing together a couple older sets but there should be a set for the Ford high trail f150.

Great video! 👍 thank you!!

@WeissRC

Жыл бұрын

You're very welcome! 😁 Hopefully it was helpful! 👍👍

Super 👏 very cool video.

@WeissRC

Жыл бұрын

Thank you Joel, very much appreciated! 😁😎👊

great vid

@WeissRC

Жыл бұрын

Thanks man, really appreciate that!! 😎👊

@jaws_kgb9584

Жыл бұрын

If you live in Ohio, I'll pay ya to do mine lol

@WeissRC

Жыл бұрын

@@jaws_kgb9584 😂 I gladly would if I did! 🤣 I'm in NY. 😜

In fact, the motor sensor cable is not required when you use the Maxx Link cable. You have brakes and reverse lights without the sensor cable ;)

@WeissRC

5 ай бұрын

You are correct sir! 🫡 I found this out later when I converted the truck to brushless. 😜

Great instructions really appreciate it. Can you tell me what port you plugged the roll bar and rock lights into?

@WeissRC

Жыл бұрын

Roll bar is in port 1 and the rock lights are in 7 my friend. 😎👌

@hillsboromaddens

Жыл бұрын

Thanks, and again great video.

@WeissRC

Жыл бұрын

@@hillsboromaddens anytime sir

Is the lighting module itself bluetooth, or do you have to add the traxxas bluetooth module to the radio for that to work?

@WeissRC

14 күн бұрын

You need to add the Bluetooth radiolink module to the radio for it to work. 👍

Is the power module waterproof because it’s just open on the chassis? So if you take it in like a creek or puddles it’s gonna get wet

@WeissRC

3 ай бұрын

So here's my take... they *claim* that it is, but the fact of the matter is you'll have some kind of exposed pins somewhere (most likely in the aux connections). Granted it's not the "Pro scale" kit, but I have the standard light kit in my Bronco, which I have taken through creeks and whatnot... that module has absolutely gotten submerged and is very flaky today. Given those results, I would either err on the side of caution when running in higher water, or maybe even consider conformal coating. Regardless, whatever metal pins are exposed from the power module will eventually fall victim to corrosion if you run in water long enough... TL:DR, I'd avoid submerging the module as much as possible. The occasional splash here and there isn't going to hurt it. 👍👍

do you know why my turn signals dont work?

@WeissRC

Жыл бұрын

Does everything else work? Also, when you hit the signal button twice what happens? I had a bad power distribution module and my LHS warrantied it. 👍

@user-yq5dm5gq2q

8 ай бұрын

Did it worked finally?

@WhatsupwSully

4 ай бұрын

@@user-yq5dm5gq2q like others stated, just hit the signal button 2 times quickly and it should fix that issue. I had the same thing happen, everything worked but the signals........

@moisescontrerasjr242

3 ай бұрын

I rewatched and found that I missed the jumper in the f slot on the body

Awesome instructional video. But my roll bar isn’t as bright as yours. I have the pro scale light kit and I purchased the light up roll bar. I connected it into slot M like the instructions say and they are weak. What’d you do differently?

@WeissRC

10 ай бұрын

Very interesting! I will have to check my truck, but I believe my roll bar is plugged into slot 2 of the aux control block. I can verify later when I'm out of work to let you know for sure. 👍👍

@Jjsuhs7

10 ай бұрын

@@WeissRC that would be awesome thank you! By control block, do you mean the module on the chassis? Not the one on the body?

@WeissRC

10 ай бұрын

@Jjsuhs7 no problem sir! I was referring to the module attached to the chassis itself, not the body. 🤙

@WeissRC

10 ай бұрын

​@Jjsuhs7 Sorry for the late reply! It's been a busy week! 😜 I checked last night and I have my roll bar lights plugged into slot 7 of the aux port. Again that is on the module attached to the chassis. 👍👍

@MrRafal124c

6 ай бұрын

I know I can get rool bar led housing part num trx9263... what about led light number to go with it please?

Hi. Could I use the other communication cable without to use Bluetooth module? I have tqi esc.

@WeissRC

8 ай бұрын

From what I understand you have to use the specific link cable in order for BT to work. 👍

One thing you forgot. To plug the red connector into the speed controller. I couldn’t figure out why mine wasn’t working. I followed your instructions to the tee. Then it hit me.

@WeissRC

5 ай бұрын

I'll have to go back and double check! 😂 Didn't think I missed anything but I certainly could have...haha. Glad you got everything working! 🫡

@markverbruggen3900

5 ай бұрын

My apologies I don’t know how I missed it. I just rewatched it and sure enough it was there. Great tutorial. Thanks@@WeissRC

@WeissRC

5 ай бұрын

@markverbruggen3900 no worries sir! Glad you got everything sorted out!! 😎🤘

Could I put any other aftermarket lights AT the empty slots?Because Al the after market lights have got futaba connector.

@WeissRC

8 ай бұрын

I believe some of the aux slots have a special purpose. I'd have to double check the manual, but that's what I recall anyway. 👍

@user-yq5dm5gq2q

8 ай бұрын

@@WeissRC yes but how to convert futaba connector to traxxas connector? I think that this connector made from traxxas

My phone said that I requiert an high voltage detector or something like that’s to on/off the light so what the problems

@WeissRC

9 ай бұрын

Did you buy the full kit? I believe I saw something like that and just skipped past it. 🤙

Sorry if I’m missing the obvious, but what port does the rear bed light bar plug into?

@WeissRC

8 ай бұрын

I have my roll bar lights plugged into port 1 of the aux ports. Hope that helps! 🤘

@badasslilgti

8 ай бұрын

@@WeissRCI actually found the suggestion to use the M block. What I can’t figure out is what does the E green block blue wire go to or is it not used on this kit? 🤔

Hi. If I want to put extra lights to the numberly ports, how turn on and off?

@WeissRC

8 ай бұрын

Very good question! There may not be a way to turn them on/off through the app at this time. Additionally, I believe some of the aux ports are intended for different features. I will have to read the manual again. 👍👍

Whats the difference between using max cable and other one ? Sorry im a noob ,my light kit is on order.

@WeissRC

3 ай бұрын

No worries, certainly a fair question! You will need the max link cable if you want to pair up to the Bluetooth app... another discovery I made is that the Max link cable allows the transmission of motor data, specifically motor direction. When I went to a brushless setup, I originally didn't understand how my reverse lights were working. I would later discover it was due to the Max link cable. In short, I would use the Max link cable if at all possible! 🫡🤙

@LookupJohn316

3 ай бұрын

@WeissRC thanks a lot. I will be going that rout as I ordered the max link and phone controller mount as well.

@WeissRC

3 ай бұрын

​@@LookupJohn316​ sounds good sir! 😎 Best of luck and let me know if you need help!! 🤘

Do you know if hazard lights could run on and off from the app? Except signal button?

@WeissRC

8 ай бұрын

Good question! I don't believe so, at least not that I'm aware of.

@user-yq5dm5gq2q

8 ай бұрын

@@WeissRC they say (traxxas) with the new update will fix that issue.

@WeissRC

8 ай бұрын

@@user-yq5dm5gq2q that would be nice!

What u plug your roll lights in too

@WeissRC

3 ай бұрын

As I recall, slot "K" of the distribution module on the truck body. 🤙

I didn’t know the K10 comes with the roll bar in the back with the lights? I thought it was only on the ford.

@WeissRC

5 ай бұрын

Thanks for the comment! Unfortunately, I had to add the roll bar, as the truck did not come with it (like the F150). In the end, it costs you around an extra $50 bucks, but that's also why the K10 was cheaper to begin with. 👍👍

Do you know the part # for the Max Link cable ???

@WeissRC

Ай бұрын

TRA6525. 😎 Also, you can order the cable right from Amain! 🤘 www.amainhobbies.com/traxxas-communication-link-telemetry-expander-tra6525/p659996?gad_source=1&gclid=Cj0KCQjwpNuyBhCuARIsANJqL9P-8IBuu1ZZlDV17HK5aOEuFK8jTMnREIBUqmTLabRuqr0SkI3TlhcaAkOjEALw_wcB

Could you tell us where you plugged the light bar into please

@WeissRC

6 ай бұрын

Absolutely. Slot 7 of the aux port. 👍👍 Hope that helps!! 😎👊

@thunderking68

6 ай бұрын

@@WeissRCthank you

@WeissRC

6 ай бұрын

@@thunderking68 anytime! 😎🤘

hi sir. i installed everything but the brake lights dont work. Do you know what could i do? Thanks

@WeissRC

8 ай бұрын

Did you hook up the leads to the motor, which go to the power distribution module? If so it's possible your distribution module (attached to chassis) is bad. That happened to mine as well!

@user-yq5dm5gq2q

8 ай бұрын

Yes i hooked up them, because the reverse light working.@@WeissRC

@WeissRC

8 ай бұрын

@@user-yq5dm5gq2q Roger that. It may very well be your distribution module then.

@user-yq5dm5gq2q

8 ай бұрын

@@WeissRC I had forgot to install the little jumber at the port E So now I have working brake lights but not turn signals. Hazards work well. Do you know if there something to set up from the menu off the application? Or fi you could upload a photo from yours the turn signals? Thanks for the help, appreciate.

@WeissRC

8 ай бұрын

@user-yq5dm5gq2q glad to hear you got part of it working! As for the turn signals, the only way I'm aware of to enable or disable them is by using the menu button on the distribution module. Mine was actually bad and I had to replace it. I'm not aware of a way to configure the turn signals through the app, if there is one.

My brother has a ford f150 the turn signal won’t work any suggestions

@WeissRC

11 ай бұрын

Have you tried pressing and holding the mode button for several seconds? You can also press and release the mode button to cycle through the turn signal option. If that's not it, it's likely your main distribution module (which attaches to the chassis) that is malfunctioning. 👍

@babito1982

11 ай бұрын

How did you hook up your roll bar to turn on and off with your headlights. I didn’t see that in the video

@WeissRC

11 ай бұрын

@babito1982 good point! I didn't focus too much on the roll bar since that wasn't the point of the video. That being said, there are 2 roll bars and you want to buy the one with the buckets that already have the LEDs installed. 👍 After that, it's simply a matter of drilling 4 holes in the dimpled areas of the body, running the wiring harness through one hole, and connecting it to one of the aux ports on the distribution module. 👌 I can even do a quick how to if you need help. 😁

My turn signals don't work. But parking lights do work. I have the jumper installed. Idk what's up

@WeissRC

5 ай бұрын

I had this very same issue myself. The power distribution block (installed on the chassis) was bad. Fortunately for me, my LHS warrantied it immediately. I believe you may be able to warranty it through Traxxas as well. 👍👍 Best of luck, sir! 🫡

@FailedSquare

5 ай бұрын

@@WeissRC traxxas chat fixed my problem. Turn signals were actually switched off, if you double click the signal button on the module it enables them. I also had an issue with no brake lights, that was my mistake plugging them into the wrong port

@WeissRC

5 ай бұрын

@FailedSquare glad to hear! I should have mentioned double clicking the menu button to enable them. In my case, that did not fix it and the module needed to be replaced. Anyway, glad you got yours working!! 🤘 Happy crawling, sir! 😎

Why is only one of my brake lights working?

@WeissRC

9 ай бұрын

But that 1 light is consistently working? If so I'd have to say you have a bad bulb in the other side. 😞

@SouthernStandards

9 ай бұрын

@@WeissRC ok i got the brake light fixed it only comes on for the brake but the other brake light is still not working so get a new bulb for the brake light?

@WeissRC

9 ай бұрын

@@SouthernStandards it is sounding like that one bulb is bad, yep!

@SouthernStandards

9 ай бұрын

@@WeissRC ok thank you for telling me

@SouthernStandards

9 ай бұрын

@@WeissRC ok I got my light working but now my brake lights aren't working

I believe those are side cutters! You cant say dike😅😂 its 2023 you might hurt someone's feelings! I

@WeissRC

Жыл бұрын

😂😂😂😂😂 you're probably right Bobber!! 😜

Hey, does the kit include the side marker lights? Thankbyou

@WeissRC

10 ай бұрын

It absolutely does! Thank you for your question. 😎👊