Thanks hand

Vlog all your projects. Home improvments all of it. Even ones people do. I get a kick out of watching you. Great content.

I swapped in the SPE thermostat when I did this job on my truck. Made a HUGE difference on trans temps, which is the main reason I did it. Now when driving up steep grades in the Rockies, my trans will barely top 190, when it was getting up to the 220’s and 230’s before. And when I’m towing, it stays in the low 200’s. I know Ford says it ok to run these transmissions hot, but I feel a lot better seeing those lower temps.

Nice place !! 😳

Hey bro that spe adapter had slots in it and the radiator had two grooves you just need to line them up and it would have slid right on 😂😂😂 i know they say the SPE logo needs to be facing up but i think they were wrong with that, love your videos you’re funny as hell. Keep up the great content

I watched this yesterday started leaking now I have an excuse to buy it 😂

@COLTSWAY

5 ай бұрын

My man! 🇺🇸🦅🇺🇸

Thanks for sharing Brother. Like me we just do what we can. Keep the videos coming.

@COLTSWAY

2 ай бұрын

My man! Appreciate you watching brother. 🇺🇸🦅🇺🇸

Appreciate the trouble you go through for making content for us. Whether you know/like it or not, you’re very entertaining! Just ordered a ‘24 SD. Can’t wait to be part of the community!

@COLTSWAY

11 ай бұрын

Anytime brother, I appreciate you watching my dumb ass! And thank you!! That 24 is gonna be nice!!! 🇺🇸🦅🇺🇸

Oh yeah, throw away that can of Axe body spray silicone. It ain't worth the struggle. Use silicone grease from a tube. You're a legend Colt. Latte time mate.

Good video. A lot of people dog SPE. I've had good luck with them so far.

Great stuff man, love when u lose it its entertaining lol. Idk but u got me looking for a old ford diesel that badboy rocks. Best is the side vent windows! Anyways great stuff and you take your time to show people I think its much appreciated! Dont u forget about clyde 🇺🇸 🦅

The new camera makes a nice video. You'll get the hang of it, brother

I listened to the language 21 seconds, that was my limit

@COLTSWAY

4 ай бұрын

BYE!!!! 🇺🇸🦅🇺🇸

Thanks for the warning on the led light adjustment. Was careful and successful

The good thing about it being tight with the o-ring on is hopefully it will seal good won"t leak. Nice video!

What happened to the new intercooler. I see you put the factory one back on. I installed the mishimoto intercooler on my 6.7 and it sounds like F22 raptor taking off. 😂

@carls2210

11 ай бұрын

I’ve been looking at the mishimoto one. What color did you get and how difficult was it to change?

@ozzymed8136

11 ай бұрын

@@carls2210 Black. Took me about 2 hrs. Very easy install.

Another great "how to video". Thanks again for sharing. You remind me so much of how it was when i was in the "Corp"!!! Especially when you " lose your "SH--"! LOL!!!

What happen to the aftermarket intercooler you had put on? Can you give an update?

Great job Colt!!!! Mine was a B-tch to get on too. What happened to you Pro Power Charge Air Cooler that you installed? It looks like you have the OEM cooler back on.

Seems like the easy stuff always turns into a pain in the butt, feel your struggle Colt. Love the commentary💯

Nice upgrade not only cosmetically but functionally as well. Also, thanks for the tour at the end, I like your property, man! I’m envious of all that room you have for activities haha!

Just ordered this kit. Hopefully its better than the stock one. Ive put 2 factory ones on and they end up leaking at the radiator connection. Im bout tired of it.

Great video. Short and sweet. Happy to help with camera settings. Also, we’d love to see how you improve your property overtime, so please film those upgrades. It’s a journey we’d love to take with you. Where’s Clyde??

Best content! Love the commentary!! I’m about to order an SPE upper hose because mine is starting to drip. Not a lot but I don’t want to risk being stranded on the road. Keep doing what you do bud! 🇺🇸 🦅

I feel the frustration when trying to figure stuff out. 🤣🤣 I am the same way in the shop.

Your property looks outstanding, nice work! But, you didn’t hit Clyde before you rolled?

hey would be cool to make content out of all the house stuff too.. just a suggestion.. might be to big of a pain in the ass lol

Colt brother you Crack me up

Stretch the O-ring a bit

Like always fun to watch. 🇺🇲🇺🇸🇺🇸🇺🇸

Quick and easy….🤣 Great job Colt! 👊🏻🇺🇸

Yessir Son looks good. Can’t wait for the other install. Keep working Colt.🇺🇸🇺🇸🇺🇸

Question, have you diy your own main and secondary coolant Or take it to shop? I checked OMG the cost better diy. Just like some input

I installed this a while ago and man it was hard to get that end on man i feel you

No better time to work on the ol 6.7 than on call week. If I can’t get er done in 7 days then F-it…. Stay safe on the lines Brother!!!!

You keep it real my man. Carry on.

@COLTSWAY

11 ай бұрын

Always! 🇺🇸🦅🇺🇸

Did you swap back to the stock intercooler?

Nice job. When I installed the SPE intercooler piping and CP4 disaster kit I opted to replace my upper hose with the factory hose and now I’m glad I did so thanks for the video. I did use the SPE low temp thermostat which I like. If I recall the housing bolt torque spec is around 48 in-lbs so your torque technique was probably within spec 😜.

Nice trouble truck, can't wait to get one just like it. Hoping this coming spring. Good video bubba!!

@COLTSWAY

9 ай бұрын

You will love it! 🇺🇸🦅🇺🇸

Hey man do a video on installing a disaster prevention kit for the cp4 pump

I am having the same problem as you Colt getting that fitting on, was afraid I was going to break the radiator! I will try the wood block trick. I agree it looks nice but damn does it have to be that tight! Freakin radiator is plastic! I did the SPE heater hose reroute kit and need to install the turbo coolant line as well. Appreciate your videos!!! Love your videos brother! Yard work looks great, your girls will appreciate their Dad! Thanks Bro!

@COLTSWAY

11 ай бұрын

My man! Yea get the block of wood and a hammer. Mine slipped on in 2 hits! Thanks for watching brother! 🇺🇸🦅🇺🇸

Ranger Maintenance: Beat the crap out of it until it works, and if it doesn't you get the satisfaction of destroying it.

@COLTSWAY

9 ай бұрын

100% 🇺🇸🦅🇺🇸

I have always just used Vaseline for O-rings. And silicone gaskets. I have never had an issue ever.

@COLTSWAY

11 ай бұрын

Yea. Normally this spray works great. But judging by other people’s comments they had they same problem. This thing was damn tight! 🇺🇸🦅🇺🇸

@statla6891

11 ай бұрын

I used Vaseline on the SPE cold side pipe and it slide on pretty easy. They definitely make sure they fit tight 🤣🤣🤣

@COLTSWAY

11 ай бұрын

@@statla6891 Vaseline always helping out in tight spots…..😂

Do a turbo next!

Damn good video son. Turn that new camera on auto mode. It really looked pretty good though

Good stuff. My 2 cents: I've had bad luck with worm gear clamps with radiator hoses. If you can, replace them with constant tension clamps (kind you use a pair of pliers to squeeze and remove). Worm gear clamps don't do well with heat cycling and tend to loosen up over time.

I am crying watching this one. Another great, real world video. I am about to be doing some work on mine truck and have been rewatching your videos. I totally predict some red ass. Colt, to quote you, “next time hit it with your purse.”…..😂

Plan on getting better clamps

After replacing my upper hose by spe. I checked it a day later and my hose was sucked in and once opening up the reservoir cap it released the pressure. Contacted spe. They say I need to replace cap on reservoir. Why is this. You know? They didn’t answer me back. So just seeing if yours had that problem ?

Just did this in my dad’s 14 PS. He had already installed the lower temp thermostat. That upper adapter will only go one way. Has a thin and a think index notch at top and bottom. Once we figure that out it went on with slight force. We also did the SPE coolant rerout kit at the same time. The fitting which needs replaced at the lower heater core line is an absolute WHORE to get too.

It's time for a latte!

Don’t ever sell this truck Colt. Run that beast for a million!

Earned your latte today, Son.

man I hope yours doesn't leak, I went threw 2 of those SPE rad hoses and all it did was leak at connectors by radiator and engine, added double clamps, tried the best constent presure clamps, nothing but problems, had to use another brand.

You know it’s going to be a good video when you see all the pissed off cussing parts right away!!!

I got one and cannot get the fitting to snap onto the radiator.

How many miles are on your truck

@COLTSWAY

9 ай бұрын

72K 🇺🇸🦅🇺🇸

What kinda watch is that?

What happened to the legendary mullet

@AndrewTa530

11 ай бұрын

summer

So now driving it for a bit, do you recommend it? Not just looks but over all function dick.

@COLTSWAY

10 ай бұрын

I do like it. Haven’t had any problems at all. No leaks or anything. Looks way better and I’m happy with it. Just did the SPE coolant re route and it cleaned up the engine bay even more. Appreciate you watching and for the comment…..Dick! 🇺🇸🦅🇺🇸

@eddiesleeves3734

10 ай бұрын

@COLTSWAY brotha I watch all you videos, your dumbed down way makes everything easier for us peasants. My truck would have been a brick during the delete withoutcha so thank you for making content for the regular man......dick. Keep it up! 🇺🇲🤙

@COLTSWAY

10 ай бұрын

My man! Thanks brother! 🇺🇸🦅🇺🇸

🇺🇸 🇺🇸🇺🇸