It's like watching a laidback doctor..doing open heart surgery..dude..never gits upset over anything.....just calmed and cool........thats what I dig about Mike.....his old school...cool..👍😎

@pacificmike9501

2 жыл бұрын

Wow! Thank You

That Linkert is a beautiful artifact from the golden age of American industry.

@pacificmike9501

2 жыл бұрын

Very well said.

Your dad and mine could have been good neighbours, but for distance. I owe mine like you owe yours. From my side had he watched me trying to deal with that choke ball and spring, it might have been "the mind and the body do not get on well together." but with a smile, bless him. Bless you and the camera man too, 'cause you combine to make me happy.

@pacificmike9501

2 жыл бұрын

Thank You. My dad quit raggin' on me during those difficult jobs when he realized he was ahead to hand me tools instead of the other way around.

Mike watching you work on that carburetor is like watching Bob Ross paint-master piece man👍👍

@pacificmike9501

2 жыл бұрын

Thank You

Hello Mike great to see you again and enjoy ing your shows keep up the great work my friend and thanks for sharing and God’s blessings for you brother

@pacificmike9501

2 жыл бұрын

Thank You, and always wishing you and yours the best.

That ‘screw installer’, as you called it, is the only other one I’ve ever seen other than the one I got from my dad about 60 years ago. When you picked it up I thought to myself “I know what he’s going to do with that”.

@pacificmike9501

2 жыл бұрын

Yah, they've helped me as long as I can remember.

@Shovel1978

2 жыл бұрын

I saw that and thought about how much I need one!

I also use the same screw starter. Thanks for the content.

@pacificmike9501

2 жыл бұрын

Yah, it's cool, huh. Thank You

Those old brass carbs are so pretty when they're cleaned up. A little too much coffee? Nah, can't happen. As I get older, some of my fine motor skills may be lacking but I can still stick my hand in to a tight space and maneuver a bolt in while my adult kids boggle and constantly ask how I do that magic trick.

@pacificmike9501

2 жыл бұрын

And I still knock things over and catch them before they hit the floor. "How'd he do that?" Funny how working with your hands develops things in you.

Your experience is priceless

@pacificmike9501

2 жыл бұрын

Thank You. It's just "time in."

How is it possible that you don't cuss your way through a project like this? Thanks for being awesome.

@pacificmike9501

2 жыл бұрын

Good question! It doesn't get the job done any easier. So, I decided I wasn't going to do that. I just have a good time with it. Thank You

I see a lot of them old linkert's and a good majority of them have been polished. Good to see that one has not been polished.

@pacificmike9501

2 жыл бұрын

I like 'em and have them both ways. My Knuckle actually has a beautifully chromed one. My hat is off to the pro that did the job. It's perfect and operates perfectly.

Gotta love the brass, old school patience with those small pieces.. I might have said a couple 4 letter words during reassembly.. thanks for the video.

@pacificmike9501

2 жыл бұрын

Sure. I do it because I like it. Sure, I mess up. Everybody does. I'm just pleased to do it.

Beautiful work,you make a great teacher.

@pacificmike9501

2 жыл бұрын

Thank you very much!

Now that's something I never knew flipping that choke on full lifts that needle and is a fuel enrichner. .

@pacificmike9501

2 жыл бұрын

That's why I mentioned it. A properly tuned Panhead, Knucklehead, Flathead, they actually start quite easily.

@charlesyates6687

2 жыл бұрын

@@pacificmike9501 ya but few are properly tuned . I can listen to the exoust and tell you if it needs richened or leaned or advanced or retarded. 90% are off and 50% are way off kinda like weman.lol

Thank you

@pacificmike9501

2 жыл бұрын

You're welcome

These videos are cool. I end up wanting them to be longer. This one reminds me of my teenage years in the 1970s. If we had a friend that needed a carb or a brake cylinder or whatnot rebuilt, we'd find a property owner who had a shed and a few tools, buy him some beer, and go over and do the job there. Those were really precious times, which molded some of my future life.

@pacificmike9501

2 жыл бұрын

We all start out the same, then do what moves us, and somehow we develop into that which we are. In a perfect world, everyone could love what they do.

Importing that old Pan is getting closer and closer and I cant get enough of these vids of yours. Especially on the old bikes. You make it look so easy to pull apart and fix/clean up. 👍

@pacificmike9501

2 жыл бұрын

More to come!

Thanks for putting up cool and informative videos. I watch these for good entertainment and I learn a thing or two as well. :)

@pacificmike9501

2 жыл бұрын

Glad you like them!

Another good job

@pacificmike9501

2 жыл бұрын

Thank You

Outstanding! Clockwork like.

@pacificmike9501

2 жыл бұрын

Thank you!

I'm saving this for when I go home tonight... I want to see how pretty that car turned out 😉

@pacificmike9501

2 жыл бұрын

Hope you enjoy it!

Excellent work camera man I felt like Mike was about to elbow me when I had my face down by that beautiful carburetor Thanks for another excellent video

@pacificmike9501

2 жыл бұрын

Thanks 👍

@cameramanmike2072

2 жыл бұрын

😊

That carburetor, soaked in history and a work of art.

@pacificmike9501

2 жыл бұрын

That's a nice "cleaned up" way to look at it.

Love the music stand in the shop. My 1936 steel bodied National is at home in my machine shop.

@pacificmike9501

2 жыл бұрын

I'm a music "appreciator." I know what a National is. I do have friends that play them. When I had my shop, we had live music every Thursday Night during the Summer months. Music and Harleys go together. The music stand holds a service manual. A 1936 National has got to be an incredible instrument.

Fantastic!!! you make it look so easy,,, but i see pure skill,,, thank you,,,,,

@pacificmike9501

2 жыл бұрын

Thank you very much!

Enjoyed watching this video. Just wish I had patience for doing work on small items.

@pacificmike9501

2 жыл бұрын

It's a concious decision. Now, if I could just spell that right.

Looked forward to this video!

@pacificmike9501

2 жыл бұрын

Cool. A little difficult to make my fingers do what I want with people looking and the camera trying to capture it all.

@philly2x

2 жыл бұрын

Not an issue as a viewer.

"Being in a hurry just makes for a bad job" ; prophecy!

@pacificmike9501

2 жыл бұрын

Yup

Mike is the Bob Ross of motorcycles

@pacificmike9501

6 ай бұрын

Thank You.

You are so soothing to watch. I try to follow that example. ML&R

@pacificmike9501

2 жыл бұрын

Thank You

Also, you could do a perfect John Wayne impression without much practice.

@pacificmike9501

2 жыл бұрын

Thank You

Thank you for sharing. Carb cleaned up pretty nice, but boy does that carb cleaner stink. Watched and very much enjoyed.

@pacificmike9501

2 жыл бұрын

Wow! Does your computer have "Ability to Smell?"

@thatsmrharley2u2

2 жыл бұрын

@@pacificmike9501 Smell-A-Vision

@pacificmike9501

2 жыл бұрын

Cool.

@JohnTheBlacksmithUSA

2 жыл бұрын

As an FYI, if you are using Berryman's (the stuff in the white 1-gallon "dunk tank") don't stir it up. A lot of folks stir it, thinking it needs to be mixed up, then don't understand why their shop stinks for a few days. The stuff has water (or something else) floating on top as a "vapor barrier" to the heavier cleaner, so stirring it up just makes it stink and doesn't help with cleaning.

I used to braze a dime to the high speed. And im sure you know why .

@pacificmike9501

2 жыл бұрын

Easy to turn running down the road.

Have to agree with ya Mike, the most beautiful carb ever put on a Harley. SU a close second. You have outstanding patience my man!!

@pacificmike9501

2 жыл бұрын

Thank You.

I love your chillin attitude I need that and enjoy what I'm doing thanks Mike

@pacificmike9501

2 жыл бұрын

It's a "mindset." It's a decision. I want to be happy. I want to enjoy things. Had a few "close calls." Glad to be here.

Knowledge and experience is everything. Thanks Mike

@pacificmike9501

2 жыл бұрын

The more time you invest, the better it gets. Thank You.

You're a National Treasure Mike 🇺🇸

@pacificmike9501

2 жыл бұрын

Wow! Thank You.

Getting back to that 1956 thing. My uncle used to say that about what he called his 56 Harley. It was really a 57. Last of the hardtails. Somehow he was able to purchase it in Oct 1956 from Wilkes Harley Davidson in Barre VT. Before they were released to the public.Point being we like rigid frames. Best wishes Mike.

@pacificmike9501

2 жыл бұрын

Backatcha. I love my rigids.

Great video, Mike. Amazing to me, that with all the mods done to that old pan over the years, that it still has the original carb. So many people just threw an S&S on it. Which is not an automatic cure all.

@pacificmike9501

2 жыл бұрын

Different strokes. If you live with the old Linkert and learn it, you get addicted to them.

I enjoy your videos and learn a lot from your approach even though I’m A Brit bike guy and know nothing about Harleys I would really like an early iron head sportster in stock condition!

@pacificmike9501

2 жыл бұрын

Very few of them around "in stock condition." They are cool. Certain models and certain years have become quite collectable. Like anything else, if you're really interested, become knowledgeable. There are some real treasures out there. I have a real soft spot for the XLCH models. I did have a 77 XLCR with almost no miles on it. Have fun.

I agree when cleaned up the m-74 along with all the linkerts are beautiful carbs but on my '55 panhead when I changed to a pre-cv keihin I went from 25 to 40 mpg. I do run a mtp-35 with an adjustable mainjet on my 40 knuckle which is better but the new carbs just work better. I get it if you are going to ride a 100 miles a year on your garage queen it doesn't make a difference. This is by no means an indictment on your efforts but just an alternative to someone who wants to ride these marvels. Excellent rebuild video. Colder weather is coming even in the high desert.

@pacificmike9501

2 жыл бұрын

I've ridden all over with my 52 Pan with an M74-B. But then, she's got a real nice one and I always use modern high flowing air filters on them. Same on my Knuckle. Both motors are 74 inch, with a few modifications. They are both super smooth, high mileage makers.

Good afternoon Mike . How are you ? Thank you for this video .

@pacificmike9501

2 жыл бұрын

I'm good. Thank You. And I hope your are well.

@ralphtieleman4950

2 жыл бұрын

@@pacificmike9501 I am well , thank you . Getting a bit cooler up here in Canada. 40 this morning.

Hello from a rainy Sweden. Nice to see how that old carb turn out very nice👍. But i can see that it is not a work that i could do. My hands shake to much to put in those small parts and such. But i don't have a carb like that anyway. Have a nice day both of you. Kjell Blomstrand🇸🇪.

@pacificmike9501

2 жыл бұрын

Thank You and You, have a nice day.

She is scrubbing up real nice

@pacificmike9501

2 жыл бұрын

Yah, I think she'll come around.

Great work Mike, you really need to cut back on the caffeine. 😆 By the way, my father gave me a screw holder identical to the one you have.

@pacificmike9501

2 жыл бұрын

Cool stuff.

Enjoyed the video!

@pacificmike9501

2 жыл бұрын

Glad you enjoyed it!

I wondered about the spring-loaded screw starter. I have one that hasn't been out of my tool box since breaker points went away. You know--like 45 years. LOL!

@pacificmike9501

2 жыл бұрын

I can relate.

IIRC General Tool made those screw starters & also recall seeing them at Sears in Craftsman brand a long time ago...Blue Point might carry them.???...Ferrous & Nonferrous versions IIRC = magnetic vs. device that applies tension to slotted screw...Also remember one for nonferrous Phillips & "Reed & Prince" screws that applied tension in 4 outward directions...

@pacificmike9501

2 жыл бұрын

Thank You, Flash the Tool Guy. Good lesson for the day.

@flashgordon2816

2 жыл бұрын

@@pacificmike9501 Those specialty tools sure make certain tasks much easier...Little research = Amazon has similar screw starter tools listed ...not sure if it's same quality of the old USA made...IDK? Hopefully info will help any viewer that wants one...> In my area always had trouble finding even more common tools or fasteners before the "interwebz" existed... Recall burning up 3 or 4 tanks of gas looking for standard (fractional) thread stainless socket head cap screws(AKA Allen heads) Every area hardware & auto parts store = black oxide & metric were everywhere but no standard in even zinc plate....

Carb came out nice

@pacificmike9501

2 жыл бұрын

Thanks 👍

You were correct in the last video. That is the carb my friend 's panhead had. I recall it being that color, but I was unaware it was a brass body. His and the one in your vid here are the only two I recall ever seeing. Because so many install other carbs/SS carb. I'll bet that old carb is worth some $$ to the original equipment/collector guys. FWIW these must be a pretty good carb for a pan, because my friends panhead was pretty darn fast running one of them.

@pacificmike9501

2 жыл бұрын

They're a great all around, including "hot rod," carburetor. The only reason I ever go to a different carburetor on Knuckles and Pans is a big displacement engine that requires something larger. It's so nice to not change jets, to reach down and simply turn a few clicks at higher or lower altitudes. Once you're used to them, you realize how much they'll teach you. Just beautiful old technology. There are bunches of these carburetors around.

Good morning Mr Pacific, Cameraman Mike, hope all is going well. First time I've seen this carb be rebuilt and got a say, what a beautiful piece of history, back when things were made to last and obviously, they do. Man, completely off subject but I would have loved to hang around you with you for just one day back in the 70's, unfortunately I was born in 78' but if I had a time machine, we'd be riding around on our knuckle, flathead or maybe pan talking about how much business you are getting from the shovels haha. It's funny how times change, with Harley's or AMF shovel's almost putting them out of business and a desperate attempt to save face with "project Nova", thankfully it never launched. Now, the Shovel is one of the most sought out engines on the market and Mr Pacific knows how to fix all of AMF's flaws. What's this have to do with the video, absolutely nothing lol, I just think you are such a good person and I'm hoping, as I said a thousands times, to meet you, shake your hand, take a picture and ride two abreast, bar to bar, side by each. That, would be one of my biggest highlights in life. You can't put a price history, as this knowledge and skill set to be passed down from generation to generation is priceless. Take care of yourself Mike

@pacificmike9501

2 жыл бұрын

Wow! Thank You. The seventies were the seventies. This is now. There are so many people building bikes. The younger set is having a ball with this stuff. It's not a bad time, just different. When I'm riding an old bike down a back road, it's whatever year I think it is. AMF saved a failing company with worn out tooling and technology really taking off. Think about this: Electronics was a new thing and failing in every industry. Ignitions and charging systems didn't stand up to heat or moisture. It went on in every industry. That certainly wasn't AMF's fault. I bought my AMF new in '78. It's a 77 FLH. We're still in love. Earlier bikes took more routine maintenance. I try to respect the developments. But, if we want to have fun, the best time is NOW. I look forward to meeting you. You never know when or where.

@cameramanmike2072

2 жыл бұрын

👋😊

Yes Mike, you are right, that carb is a thing of beauty ( maybe I’m bias cause I love brass).

@pacificmike9501

2 жыл бұрын

Yah, me too.

Doctor Mike , to the E.R. has a nice ring to it ! lol.

@pacificmike9501

2 жыл бұрын

That's funny. Thank You.

Another great video Mike. I'm curious to see if you happen to know an old friend of mine... Dan "Fuzzy" Quinntana? I'm not 100% on his last name, We all just called him Fuzzy! LoL. You remind me of him with all of your knowledge and manner of teaching. TY

@pacificmike9501

2 жыл бұрын

That's quite a compliment. I'm proud to say Fuzzy is a good buddy. We've known each other for years.

Yep... a thing of beauty for sure...so simply effective...EFI brain is not such a picture

@pacificmike9501

2 жыл бұрын

It does the same thing, but it does it electronically. I like to do it myself.

@mpista7182

2 жыл бұрын

@@pacificmike9501 All i know are old carbs on cars (One/two barrel like on my 59 283 ) and nothing about FI much less EFI. I can fix a carb but am totally ignorant of electronics. But I love em for sure. Thanks for sharing your knowledge !

@pacificmike9501

2 жыл бұрын

Thank You. Some of my toys, when I was a little kid were Stromberg carburetors I still own. I enjoy carburetors.

Would like to see you install new bushings .

@pacificmike9501

2 жыл бұрын

The next one I do will probably need them. Easy job though. We'll show it.

....shot in the dark here. Wanna get my first motorcycle 🏍 🤔, love the old harleys..any advice/recommendations 👀 🤔???

@pacificmike9501

2 жыл бұрын

Just jump in with both feet. If it was meant to be, it will change your whole life. The road goes on forever.

Well now I’m having a debate one what carburetor to run on my panhead chopper. That linkart looks so good but I was also thinking the S&S super would be good then I found out lectron makes one for the old panhead too. Too many choices and I only have one engine

@pacificmike9501

2 жыл бұрын

The Lectron was originally designed for those engines. I've run every kind of carb you can imagine on these old motors. You see what I run.

Wow 👌

@pacificmike9501

Жыл бұрын

Thank You.

that carb really cleaned up nice ! when i watch this i can't help but wonder how somebody figured out how to make this all work while designing it . must requres a verty different brain than mine. :)

@pacificmike9501

2 жыл бұрын

They started out the hard way and just kept improving on it. No computers, just "seat of the pants." They really did it well too.

I can't really imagine needing thread lock on any intake system pieces. Any small flakes that might break loose could potentially gum up fuel passages I would think. They never instructed us to do so in any classes I've taken.

@pacificmike9501

2 жыл бұрын

Good.

Michael, Dikle, Motor man.:)

@pacificmike9501

2 жыл бұрын

Good Morning!

1st to L.C.

@pacificmike9501

2 жыл бұрын

Yay!

Hello Mike Just put a Rubber float in my Linkert M74 and now start and runs a lot better. Can you show how to adjust high and low speed needles when running. Thanks your the BEST

@pacificmike9501

2 жыл бұрын

I'll certainly will show it when we start up the Pan. We have shown it in past videos, but we'll show it again. With the engine running, adjust the idle mixture in one click at a time, until it idles smoothly. Then adjust the high speed needle while running down the road. This will take a little practice. You start out rich, then you lean it out by turning the needles in one click at a time. This done with engine warm. Go to our KZread homepage and click on the word "videos." It's in there, but, we'll show it again on startup as soon as we get there.

Rubber ducky float

@pacificmike9501

2 жыл бұрын

We're gonna see about that.

C’mon Project Bike 2.

@pacificmike9501

2 жыл бұрын

It's comin'.

Crabadators !

@pacificmike9501

2 жыл бұрын

Strange word. But they're fun.

👍🖖

@pacificmike9501

2 жыл бұрын

Thank You

Linkert carb says something imo. I see too many s&s. Those old motors don't need a lot of carb on them

@pacificmike9501

2 жыл бұрын

Unless you're building a really oversized engine, they're more than adequate, and a real pleasure.

Awesome Contant any idea where I can buy the screw installer tool your dad gave you?? Thanks

@pacificmike9501

2 жыл бұрын

Thank You. I think any good tool supply would carry them. Tool trucks are really good for stuff like that.

Old rodes still onthe road.

@pacificmike9501

2 жыл бұрын

Yep

Hey Mike! Very good video. Quick question would a 1985 Softail FXST come factory with the cruise control screw/knob under the throttle housing or is that an aftermarket mod? Ive tried to search the Internet for it but cant seem to find an answer. Thanks again for all your help and information, I feel much more comfortable with my Harley knowledge now because of you. Happy Thanksgiving. 👍

@pacificmike9501

2 жыл бұрын

It could have an aftermarket knob or lever, but it came with that system. Look it up in your service manual.

@pacificmike9501

2 жыл бұрын

Hey. Happy Thanksgiving to you too.

@calvinhamm3748

2 жыл бұрын

@@pacificmike9501 excellent!

Hey Mike, this is a bit off topic, does a 79 rotary top trans have a provision for a Speedo cable, or is the cable driven by the wheel unit? I am converting an fx to an fl basically. I think the dash and Speedo are from a 75 fl , is there an issue with ratios as well? I hope that's enough info, any insight would be greatly appreciated. 4 speed rotary "cowpie" trans, 74 inch engine, 16 inch wheels, stock gearing. Thanks my friend! Love what you guys do! (Funny how you guys are all Mike's, seems like all the Harley guys here are Dave's, lol!)

@pacificmike9501

2 жыл бұрын

Okay, I'm not sure. Look at the case. If there's no place for the drive to plug in, you're stuck with a front wheel drive speedometer. If that's the case, you'll have to decide what wheel size you want to run and that would decide which part number to use for the drive. In other words, if you're running a 130 X 16 tire. Pick the drive and speedo for an FL. If you're running a 21" wheel, pick speedo and drive for a FXWG. It's just "cross referencing."

@terrymassey7619

2 жыл бұрын

@@pacificmike9501 Thanks alot Mike, I think that clears up my question, as it seems there is no provision on the trans. Appreciated greatly!Thanks

@pacificmike9501

2 жыл бұрын

You bet.

Would a bit of grease help the choke ball stay in place

@pacificmike9501

2 жыл бұрын

It might.

We’re do you get your books

@pacificmike9501

2 жыл бұрын

I believe V-Twin stocks them and the after market shops all do business with them.

@darrell3368

2 жыл бұрын

@@pacificmike9501 thanks Mike

Is that a jumbo zippo lighter behind the vice ?

@pacificmike9501

2 жыл бұрын

It's an oversize lookalike. Takes a whole can of lighter fluid to fill it.

@dennissts

2 жыл бұрын

Had one in the 70's

@pacificmike9501

2 жыл бұрын

Fun Stuff

Hey man where the jams at

@pacificmike9501

2 жыл бұрын

I don't understand.

@reaperct3454

2 жыл бұрын

@@pacificmike9501 where's the rock music at when you work you don't jam out

HOWDY Mike, Carburetor RE-Assembly = much prettier :-) " Made in INDIANAPOLIS INDIANA " :-) COOP ........................................

@pacificmike9501

2 жыл бұрын

Hello and Thank You.

Mike ever brake a leg kicking one over ?

@pacificmike9501

2 жыл бұрын

Nope. It is not necessary.

@thatsmrharley2u2

2 жыл бұрын

@@pacificmike9501 I never broke a leg, but my old '54 Pan DID launch me over the handlebars a few times until I learned to manipulate that distributor. P.S. Great video again, Mike.

@pacificmike9501

2 жыл бұрын

Thank You. My 80" Indian Chief had a 4 13/16" stroke and a long kicker arm. That arm with its gear ratio on it turned the motor quite a ways every time you kicked it over. For some odd reason, I kicked it over without retarding the timing. Let's just say "I wasn't thinking." I did got to a chiropractor after it kicked me. I needed my right hip removed from my ribcage.