THX!! I was super curious about the memory chip and its potential upgradability (or in this case, lack thereof...). This was needed content for me, thanks again

Thank you for making this video, I was curious about the electronic parts inside this device

Update video of any more modifications you’ve done?😯

hey my speaker just stopped working.. Is there any way I can check to see if its broken/ how to repair the speaker

@avaviel

Жыл бұрын

Yes, you'd need to take it apart and plug the speakers into something else. You will need to use old headphones, cut them off, and carefully push the wires into the plug.

But thank you for taking your time with the video brodie very helpful!

Will it ply into a speaker?

My stemplayer sometimes the buttons locked on vocals randomly without pressing any. Sometimes when its in the middle of the song the lights turning off. Can you help me?

@avaviel

2 жыл бұрын

It sounds like it needs to be cleaning. But this is also maybe a warranty issue.

Do you think more storage could be added?

@avaviel

Жыл бұрын

If you are an expert in this, most likely. It would need to be soldered by someone better than me!

It fell once when it was turned off, and then I turned it on, and the LED lights show that it's playing the song, but there's no sound. Now, it only works with headphones Any ideas on how to fix this?

@avaviel

6 ай бұрын

Sounds like the speaker wire was unplugged.

@gmgrxxn-te9rh

6 ай бұрын

@@avaviel Should I buy the part, or is it enough to disassemble it and connect it?

I had no idea it vibrates? Maybe mine was busted :/ Good :)

What type of screw driver does it need ?

Thanks for the video. I still don't think it's worth 200$ but it is a very nice device.

Is there a second bias in it?

I see that speaker and im having speaker troubles is it a chance ny speaker isnt working cause it’s disconnected? I havent dropped or wet it like it just stopped working

@avaviel

2 жыл бұрын

There's a chance your speaker wire is broken. Someone could take it apart for you and check that red or black wire for continuity and solder a new one on if it isn't good.

@comaduke360

2 жыл бұрын

@@avaviel definitely gonna try one of these local repair shops around and see how it goes thanks alot

@avaviel

2 жыл бұрын

@@comaduke360 what area of the world are you in?

@comaduke360

2 жыл бұрын

@@avaviel elgin, Illinois about 40 mins from Chicago

@avaviel

2 жыл бұрын

@@comaduke360 and if you do go-to shops, remove the silicone shell yourself. That's the only way you'll be sure they won't mess it up.

I painted a small Dot on the open side.

Wish i had one 😢

thanks for the video :D let me know if you'd be interested in collaborating