Steering Mounted Controls And Cruise Control For Project Laura ep4

Автокөліктер мен көлік құралдары

In this video i am adding a Skoda Superb steering wheel in my 2010 Laura, in the process i am also adding cruise control, it is plug and play with some basic coding.
The stock cluster cannot take input from steering however so the MID cannot be used from steering for now, it is okay, as i am switching to a Maxidot cluster soon anyway.
Cruise Control Stalk Part Number: 1K5 953 521 AK
Coding for CCS after installation:
01- Engine . Long coding Helper . Byte 6, Bit 0 .
17 - Instruments . Adaptations . Cruise Control Display . Active .
List of clock spring part numbers with the features they support:
wiki.ross-tech.com/wiki/index....
Pre Facelift Laura, ccs and mfsw retrofits:
• OCV Ep 04 - Skoda Octa...
• OCV Ep 02 - Skoda Octa...
Products Used-
Spline Bit Set: amzn.to/3477xEL
1/2" extension: amzn.to/3bOU6O6
Backup for the link mentioned above: amzn.to/3faQqIr
Ratchet(not the exact one I used): amzn.to/3fB1g9H
Time Stamps
0:00 - 0:21 : Intro
0:21- 2:17 : Parts Required
2:17 - 5:19 : Removing the Airbag
5:19 - 10:08 : Removing the steering, clock spring, stalks
10:08 - 11:12 : Installation
11:12 - 13:58 : Functioning/Finishing Thoughts
13:58 - 14:18 : Outro

Пікірлер: 103

  • @060_AryanSenapati-pq5cr
    @060_AryanSenapati-pq5cr Жыл бұрын

    Thank you for finally posting G. Loved the content, i’m not even nearly inclined towards using tools let alone using tools on my car but your tutorials make it so easy and assuring. saving me lots of bucks for further mods. love you

  • @PrerakKataria

    @PrerakKataria

    Жыл бұрын

    Happy to help, a lot more of such videos to come!

  • @DebabrataAcharya93
    @DebabrataAcharya939 ай бұрын

    We need more KZreadrs like you rather than phone reviewers on every f’ng corner of the streets!

  • @PrerakKataria

    @PrerakKataria

    9 ай бұрын

    🙏🏻😁

  • @Car.Exper77

    @Car.Exper77

    3 ай бұрын

    ​@@PrerakKataria can. You make a video for the air bag connection with

  • @harisshaikh1418
    @harisshaikh14183 ай бұрын

    Mind blowing custom ❤❤ I have maxidot l&k cluster,steering gateway modules auto wiper assembly, auto IRVM, auto climate, complete stereo, complete OEM.

  • @chetangandhi6053
    @chetangandhi6053 Жыл бұрын

    Great Work Sir. Love your Content

  • @jatinderkumar2508
    @jatinderkumar2508 Жыл бұрын

    Good job bhai....

  • @prajithg8421
    @prajithg8421 Жыл бұрын

    Bro i would suggest u to get a new skoda stearing wheel

  • @DeepakDass84
    @DeepakDass84 Жыл бұрын

    Great work buddy..one question, whr can we get the clock spring to use steering controls.

  • @PrerakKataria

    @PrerakKataria

    Жыл бұрын

    Scrapyards are your best friend when working on these old cars, but even I can source them for you @that.red.sells Instagram

  • @harshbangera2066
    @harshbangera2066 Жыл бұрын

    When is the dsg hitting in the Laura

  • @SuperAshutosh15
    @SuperAshutosh15 Жыл бұрын

    Where to buy a vcds cable, which works

  • @motorgeeks2053
    @motorgeeks20539 ай бұрын

    I have a 2014 Jetta Comfortline. How am I supposed to add CC to my car? Shall I just change the stalks and code it using VCDS considering my current clock spring already supports steering mounted controls? Or is something else needed in addition to all of this? Thanks. Loved your video!

  • @PrerakKataria

    @PrerakKataria

    9 ай бұрын

    Hey, check the link in my description, correspond it to your clock spring’s part number, your clock springs should support mfsw and ccs both together, only then should you change the stalk. Rest the process will be same as I showed in this video

  • @lakshya7873
    @lakshya7873 Жыл бұрын

    Can you install the modern radio from rapido 2020 In it ?

  • @sherrykharoud7014
    @sherrykharoud7014 Жыл бұрын

    Bro cruise control is for vento highline 2013 is compatible ??

  • @vicky1438
    @vicky1438 Жыл бұрын

    Very descriptive..neat work..i have a questions.. if i dont wish to have a combination switch with cruise control and also not to change the clock spring , does the MFSW controls work with just a harness change on airbag? Provided I have a MFSW procured

  • @PrerakKataria

    @PrerakKataria

    Жыл бұрын

    It won’t work unless you update the clock spring, clock spring allows the car to have extra inputs

  • @vicky1438

    @vicky1438

    Жыл бұрын

    @@PrerakKataria thank you

  • @vicky1438

    @vicky1438

    Жыл бұрын

    Hi bro. Does laura type 1 lnk MFSW steering work for type 2?

  • @nikhildeshmukh3967
    @nikhildeshmukh39672 ай бұрын

    Do you have a replace clock spring? I need it for my skoda laura

  • @sudhanshumishra9586
    @sudhanshumishra9586 Жыл бұрын

    What was the price of airbag bro

  • @prasadkommuri
    @prasadkommuri Жыл бұрын

    Cruise control for 2014 Polo 1.2 MPI, is it possible

  • @guyshesaidnottoworryabout3774
    @guyshesaidnottoworryabout3774 Жыл бұрын

    why MFW underlined in cover fotu ?

  • @vd9176
    @vd917611 ай бұрын

    Hello bro I have vw jetta 2013 model. I want to install cruise control. Is it possible?

  • @rahu2451
    @rahu24517 ай бұрын

    Hello bro I need to upgrade my steering too please can you send the link of the steering wheel

  • @Druva1897
    @Druva1897 Жыл бұрын

    While upgrading to mfsw with cruise control. Is it required to upgrade the steering module as well?

  • @PrerakKataria

    @PrerakKataria

    Жыл бұрын

    Yes

  • @iRishabh91
    @iRishabh914 ай бұрын

    Can we retrofit the cruise control on Polo 1.2 mpi? Just by replacing the stalks and a bit of coding? Or is it something to do with the bcm as well?

  • @PrerakKataria

    @PrerakKataria

    4 ай бұрын

    You’ll need a new BCM and a wiring harness which goes to the ECU and BCM

  • @krishnamurthyd9214
    @krishnamurthyd92145 ай бұрын

    Pl show more vedios

  • @lakshya7873
    @lakshya7873 Жыл бұрын

    The down black worn out part of steering can be fixed may by sand paper and paint , may be .

  • @PrerakKataria

    @PrerakKataria

    Жыл бұрын

    Will fix it with forged cf or add leather wrap over it as well when I get the wheel re done

  • @atharva0777
    @atharva0777 Жыл бұрын

    Try to source interior carbon fibre trims or dip the trims... one of friend did it looks good 👍🏻 Can't wait for Quattro now

  • @PrerakKataria

    @PrerakKataria

    Жыл бұрын

    Might add a layer of Forge CF on it myself and make a KZread video on it, let’s see ! 🙏🏻

  • @atharva0777

    @atharva0777

    Жыл бұрын

    ​@@PrerakKataria big ups to you..never seen someone working on forge carbon all by himself

  • @PrerakKataria

    @PrerakKataria

    Жыл бұрын

    🙏🏻😁

  • @eduardojacome9783
    @eduardojacome97837 ай бұрын

    Hola es compatible con un Škoda Fabia A05 Sport 2011…? El radio es un Swing Me gusto❤ como quedó …! Cuando actualizas el radio …? Saludos desde Quito-Ecuador 🇪🇨

  • @PrerakKataria

    @PrerakKataria

    6 ай бұрын

    Hey, checkout my page @project.4771 on Instagram where I have updated the radio

  • @rohitrahulraghunath2307
    @rohitrahulraghunath2307 Жыл бұрын

    What is your camera and which editing software do you use?

  • @PrerakKataria

    @PrerakKataria

    Жыл бұрын

    iPhone 13 Pro, Premiere Pro For editing

  • @rohitrahulraghunath2307

    @rohitrahulraghunath2307

    Жыл бұрын

    Nice! But your videos look like it's shot from a movie camera

  • @bhuvneshkumar3087
    @bhuvneshkumar3087 Жыл бұрын

    Could you please describe how can i convert my 2011 polo 1.6 highline steering wheel to a mounted control steering wheel?

  • @PrerakKataria

    @PrerakKataria

    Жыл бұрын

    You’ll need updated bcm, combination switch, steering and airbag and a lot of wiring, someone experienced will be able to do only

  • @bhuvneshkumar3087

    @bhuvneshkumar3087

    Жыл бұрын

    @@PrerakKataria can you help in this i can pay.

  • @saumabhobagchi5547
    @saumabhobagchi5547 Жыл бұрын

    Can anyone explain me why cruise control is required in highways? Isn't it better to modulate the acc on foot?

  • @PrerakKataria

    @PrerakKataria

    Жыл бұрын

    Leave ccs on longer stretches and give your feet some rest, why not

  • @footsteps8096
    @footsteps809610 ай бұрын

    Bro this is my 5 comment on your video please help me with cruise control in rapid.. where can i get that console.. i need that .. please

  • @richarddragon9108
    @richarddragon9108 Жыл бұрын

    Bro I have one question, I see people installing steering with Cruise Control does this only required to enable Cruise Control or Any big part to be install with transmission or something?

  • @PrerakKataria

    @PrerakKataria

    Жыл бұрын

    Nothing needs to be changed with transmission, just installing these parts and coding

  • @DipilKamediya

    @DipilKamediya

    Жыл бұрын

    Have you finished your coading

  • @DipilKamediya

    @DipilKamediya

    Жыл бұрын

    Let me know if you did I tried but not working in vcds

  • @aspava8417
    @aspava8417 Жыл бұрын

    hello, my 2013 polo 6r vehicle is factory-installed, the front fog lamps do not light up when turning right and left, it was hidden especially with / vcds / but it did not work, it only lights up when a signal is given in that direction, but do you have any information, thanks

  • @PrerakKataria

    @PrerakKataria

    Жыл бұрын

    Only in automatic variants of Polo can you activate cornering lamps with steering, otherwise they’ll only work with indicators

  • @aspava8417

    @aspava8417

    Жыл бұрын

    @@PrerakKataria Hi, what do you mean by automatic polo? I heard that there is a hidden bit in my car's bcm brain with 87p vcds in the central electiric adaptation channel, but I didn't mess with it because I don't know how to solve it.

  • @PrerakKataria

    @PrerakKataria

    Жыл бұрын

    Automatic transmission polos

  • @aspava8417

    @aspava8417

    Жыл бұрын

    @@PrerakKataria but here on youtube i saw it working very manual polo *?????

  • @vishnuvarunpuram103
    @vishnuvarunpuram10310 ай бұрын

    HI Bro, can you post a video of changing your music control system

  • @PrerakKataria

    @PrerakKataria

    9 ай бұрын

    I have uploaded it in short form content

  • @vishnuvarunpuram103

    @vishnuvarunpuram103

    9 ай бұрын

    bro can you upgrade my laura 4881 like your 4771 @@PrerakKataria

  • @thecarbonwolf7067
    @thecarbonwolf70678 ай бұрын

    Soo can we also installed RCD330 or 340G on this and use carplay ?

  • @PrerakKataria

    @PrerakKataria

    8 ай бұрын

    Yes but audio quality will drop greatly

  • @thecarbonwolf7067

    @thecarbonwolf7067

    8 ай бұрын

    you mean we need to upgrade whole audio system right ? @@PrerakKataria

  • @amitaher3503
    @amitaher35039 ай бұрын

    How much it cost will it be successful open air bag when it meet with accident

  • @PrerakKataria

    @PrerakKataria

    9 ай бұрын

    Airbags can be sourced for really cheap from a scrapyard

  • @sirpurnithin559
    @sirpurnithin559 Жыл бұрын

    How can I code the cruise control Can you please help in detail or can you make a video, how to code the cruise control

  • @PrerakKataria

    @PrerakKataria

    Жыл бұрын

    You need to code it as much as I showed in the video, nothing more needs to be done

  • @parameswarankrishnamurthy495
    @parameswarankrishnamurthy4953 ай бұрын

    Hi , Kindly advice which clock ring part number will be compatible for my Skoda Laura Elegance 2012. Retrofit Skoda superb wheels

  • @PrerakKataria

    @PrerakKataria

    3 ай бұрын

    The exact one I used

  • @parameswarankrishnamurthy495

    @parameswarankrishnamurthy495

    3 ай бұрын

    I found a refurbished one part ending with C which is midline . Any highline I can go ??

  • @PrerakKataria

    @PrerakKataria

    3 ай бұрын

    Get one which ends with B

  • @parameswarankrishnamurthy495

    @parameswarankrishnamurthy495

    3 ай бұрын

    Grt help thank u

  • @parameswarankrishnamurthy495

    @parameswarankrishnamurthy495

    3 ай бұрын

    I ordered ending with E and it's highline and all are YES

  • @dieselhead5891
    @dieselhead58919 ай бұрын

    Is BCM same on Laura Ambiente, Elegance and laurin and klement?.. Can you please share part number of BCM and pinouts

  • @PrerakKataria

    @PrerakKataria

    9 ай бұрын

    Bcm is different from those variants, higher models get 87 BCM while the lower models with no fog lamps get 84 BCM

  • @dieselhead5891

    @dieselhead5891

    9 ай бұрын

    @@PrerakKataria My laura ambition has fog lamps also i have activated cornering lights and DRL from OBDeleven... Which BCM do I have 87 or 84?

  • @PrerakKataria

    @PrerakKataria

    9 ай бұрын

    87

  • @dieselhead5891

    @dieselhead5891

    9 ай бұрын

    @@PrerakKataria can you please provide pinout for 87 bcm of Laura?

  • @PrerakKataria

    @PrerakKataria

    9 ай бұрын

    Dm me on Instagram @that.prerak.kataria

  • @rahulr688
    @rahulr688 Жыл бұрын

    Bro do a detailed video wen you're gonna install the haldex

  • @PrerakKataria

    @PrerakKataria

    Жыл бұрын

    Definitely

  • @rahulr688

    @rahulr688

    Жыл бұрын

    @@PrerakKataria love how the car is coming together 💯👏

  • @paragsawant5602
    @paragsawant56023 ай бұрын

    Bro , i activated the CCS display but it doesn't showup, can you help?

  • @PrerakKataria

    @PrerakKataria

    2 ай бұрын

    Hello, make sure you have the correct clock spring, I faced this issue once while installing and it turned out that the CCS Butron on stalk had some gunk under it, after a couple of hard pushes gunk cleared up and it started working. If this doesn’t work, open adv meas values in VCDS and look for the ccs buttons which are set, Res, cancel/off switch and check if the BCM is taking inputs there.

  • @paragsawant5602

    @paragsawant5602

    2 ай бұрын

    @@PrerakKataria Thankyou so much for the reply! The cruise control is working, all the buttons are working, green cruise control light also shows upon the instrument cluster, the only thing is the speed that i have to set doesn't show up on the MFD

  • @NavrajRajLostSouls
    @NavrajRajLostSouls7 ай бұрын

    Its no way DIY. wat VCDS you use and where to get one.

  • @kuldeep1702saini
    @kuldeep1702saini10 ай бұрын

    Bro change the cluster and also do the coding because I'm also upgrading mfsw for my Laura. Please

  • @PrerakKataria

    @PrerakKataria

    10 ай бұрын

    Clsuter happening soon

  • @kuldeep1702saini

    @kuldeep1702saini

    9 ай бұрын

    Bro do it soon. Waiting for video

  • @kuldeep1702saini

    @kuldeep1702saini

    Ай бұрын

    ​@@PrerakKataria bro havent not uploaded next part yet. Please make it.

  • @lakshya7873
    @lakshya7873 Жыл бұрын

    Doesn't the these skodas old gen four spoke steering looks like cheap copy of audis four spoke steering wheel I know vag but 15/30 lakhs vs 40/60lakhs you don't want that But now as a retrofitter not a bad idea to not to think about it

  • @atharva0777

    @atharva0777

    Жыл бұрын

    Even the 2016 a6 had a cheap looking 4 spoke steering wheel but a rs steering can be retrofitted easily in it

  • @lakshya7873

    @lakshya7873

    Жыл бұрын

    @@atharva0777 can't afford rs6 but rs6 steering wheel no can't afford that too 😔

  • @atharva0777

    @atharva0777

    Жыл бұрын

    @@lakshya7873 i saw one on a uk based website the carbon fibre rs steering wheel is for 900 pounds

  • @fg2572
    @fg2572 Жыл бұрын

    I want to be your brother

  • @coolbro4230

    @coolbro4230

    Жыл бұрын

    And

  • @fg2572

    @fg2572

    Жыл бұрын

    @Cool Bro! Polo and Laura Bombastic 😉😉

  • @akshajvashistha1111
    @akshajvashistha1111 Жыл бұрын

    Bro i am unable to reach you out i contacted you on Instagram but you haven’t responded i want to get cruise control done on my vw help me to reach

Келесі