Thanks, another great and instructive video. Would love to see the rebuild of the steering box.

Those 17 were tight on mine,I had to cut a a spammer down and put a socket on it with a bar to get leverage..

Thanks for you video very helpful

Lovely.

good day, I am having a terrible time finding a seal kit for this steering box. I was wondering where you got yours from, hopefully, it was not locally as I live in the Bahamas. please let me know if you have any helpful information, thanks.

Why would u rebuild, would that fix the slop snd being loo se?

@BenMitro

3 жыл бұрын

That's what the jam nut and screw is for on top. Looseness in the steering can be caused by steering knuckles, loose spline nuts, worn splines or loose steering arm mounts on the axles. Check all these by physically moving them side to side...if you can feel any side movement, the problem is probably there. The steering box adjustment only gives you a little bit of adjustment. Be careful adjusting this though, its a recirculating ball system and this screw/jam nut can put a lot of pressure on the recirculating balls and chambers which will damage the steering box if over tightened. I generally loosen the jam nut a tad, turn the screw a little and try the steering play then back again until its still turning easily.