Can we get some dimensions on that homemade king pin press? Thanks!!!!

These guys make you understand the get a bigger hammer concept 😀

Cool refresher course I really do appreciate it's been a long time since I've done kingpins like that

lo felicito amigo, es un trabajo delicado que requiere mucho conocimiento técnico, precaución (trabajo seguro), habilidad, esfuerzo, paciencia y todo eso lo domina usted de manera eficaz.

Certainly not saying it wasn't hard work, but the right tools makes all the difference. Thumbs Up!

@SemiWorkin

3 жыл бұрын

Thanks for watching and commenting!! Got to work smart not hard.

Never ever have I ever done a king pin in a large vehicle, but your set up and little tricks are worth watching.

simple but great idea

@SemiWorkin

3 жыл бұрын

Thanks for watching!!

Love the idea of the vise grips with pry bar to get the brake anchor springs off and on. I’ll have to try that next time. I always used a hose pick

@SemiWorkin

3 жыл бұрын

Thanks for watching!! I try to keep it simple.

Good Job !!!

@SemiWorkin

3 жыл бұрын

Thanks for watching and commenting!!

That is one heck of a king pin tool ..i love it 😀

@SemiWorkin

3 жыл бұрын

Thanks for watching!!

Great job new sub 👍🏼

@SemiWorkin

3 жыл бұрын

Thanks for watching and subscribing!!

The kingpin appears to be cambered inward at the top. Is that what allows the axle to self steer when moving forward ?

I know on balljoints the socket wears out and allows play, what wears out on kingpins to move around like that?

Hey i got a 2013 KW do all kingpins have to be pressed out? Talking about the lift axle also..

@l00ky56

3 жыл бұрын

No, if you properly grease them all at the specified time then there shouldnt be a problem. But if there is a problem, then I recommend replace the old one. But if I were you, then I would replace the opposite side as well.

@SemiWorkin

3 жыл бұрын

Thanks for watching!! Not all lift axle king pins are pressed in the axle it's usually just the ones with a two piece spindle.

@DIRT-BOSS

3 жыл бұрын

@@SemiWorkin Thanks for the reply mine is a Watson chalin 20k

Мужик шкворня меняет быстрей чем некоторые колёса✌️👍

Хорошая приспособа для шквореей👌 И ... я слежу за тобой , все чисто и со смазкой собирай 👆

@antiputing

3 жыл бұрын

Читаю коменты, все русско говорящие смазкой не довольны, что не так, не пойму. Автор молодец, придратся не к чему.

Great video. Is that a Hendrickson lift axle ? And if it is, do Watson Chalin lift axles have that same 2 piece set up on the spindle that require the king pins to be pressed out in the same manner ?

@SemiWorkin

3 жыл бұрын

Thanks for watching and commenting. Pretty much any two piece spindle set up the king pin has to be pressed in this manner.

@Andrew18408

3 жыл бұрын

No, Watson Chalin are similar to the steer axle and are tapered up, and come out the bottom.

Hi, I'm a 'car mechanic' in the UK, when I rebuild braking systems I tend to put a tad of grease on pivot points etc on the brake mechanism, is that something thats not necessary on HGV brakes?

@SemiWorkin

3 жыл бұрын

Thanks for watching!! I just usually grease the fittings and that takes care of any moving parts. I don’t lube the backing plate points like I would a car.

How you get the tie rod end in ? Usually those steering shocks are a BITCH to compress ? Or am I tripping ? Let me know ? I do brakes like you 👍🏽

That king pin tool is great, is it home made?

@SemiWorkin

3 жыл бұрын

Thanks for watching!! Yes it was made in house.

Ps el mecanico no lavo las piesas para montar los repuesto nuevos ademas no utiliciso grasa para los Rodillos

Did you make the king pin tool???

@SemiWorkin

3 жыл бұрын

Thanks for watching!! I didn’t personally make it but it is homemade.

@johnb1121

3 жыл бұрын

@@SemiWorkin can you do a video on the tool so I can make it or just give an idea of how to make it any help will be great thanks an amazing videos keep them coming...

Mira deserves tavares te quiero a ti y mas nadien,cariño vesito amor mio

How would you know if you needed a new kingpin?

@SemiWorkin

3 жыл бұрын

Thanks for watching!!

@tyalbert5063

3 жыл бұрын

5:45 If it looks like that

@l00ky56

3 жыл бұрын

If you feel the steering get harder, heavy vibration from steers or just regular play

👍👍👍👍👍👍👏👏👏👏

@SemiWorkin

3 жыл бұрын

Thanks for watching!!

It seems strange to me that they do not use lubricants to disassemble the parts that are dry

@SemiWorkin

3 жыл бұрын

Thanks for watching!!

@RichRamzee9687

6 күн бұрын

Think I'd be using a lot of penatrating spray.

No new bushings? Just new pin into old bushing set?

@SemiWorkin

3 жыл бұрын

Thanks for watching!! New bushings are in the new plugs that have to be pressed in to the two piece spindle.

@604cuinkillah

3 жыл бұрын

@@SemiWorkin for sure! Great video

you should clean before and after changing parts. dirty service is not good!

@SemiWorkin

3 жыл бұрын

Thanks for watching and commenting!!

just flip the top shoe over to release the short springs.

@SemiWorkin

3 жыл бұрын

Thanks for watching!!

How we replace lift axle balloon show the video

@SemiWorkin

3 жыл бұрын

Thanks for watching!!

the key is to work smarter and not harder.

Any requirement of Turner please send msg

'scru

Отписываюсь . Сборка и смазка резьб, конусов , шквореня в балке не твоё, не могу эту плохую работу смотреть 👎

@antiputing

3 жыл бұрын

Сам то понял что написал?