Glad to see you're still working in the shop. I was begining to think that you never came back from Florida this year. Can't wait to see the finished pump!

@carlthor91

8 ай бұрын

He did, and rebuilt a Farmall head for Pete Larsen, at Just a Few Acres Farm.

@Whipple1

8 ай бұрын

@@carlthor91. Both channels are in my top ten. Great content and very good people. Cheers! Whipple

@Watchyn_Yarwood

8 ай бұрын

@@carlthor91 Thanks for the info, and thanks to you Just a Few Acres Farm has a new subscriber. Me

Awesome! Hope all has been well with you. I've really missed your videos and look forward to your future posts.

Welcome back, David. You have been missed by many. Thanks for sharing.

Watching your channel is like talking to an old friend that I haven’t seen in awhile

Welcome back. Greetings from Friesland in the Netherlands Henk

Really good to see you again, and your fantastic shop with those beautiful old machines, that still doing jobs, not just standing in a museum.

Hi Dave, I’m Paolo from Italy, and I found (by chance) your channel some days ago; I’ve spent all my free time watching your videos, forgetting TV, my wife and my dogs. I learned a lot. Thanks! I’m 77, I’m retired, and I have a tiny shop in my garage with two lathes: a Myford Super 7, complete, and another that was scrapped by my former Technical High School where I got my Diploma more than half a century ago, but still working quite well. I also own a Bridgeport milling machine, scrapped by the previous owner (and refurbished by me, at least to working conditions) with all the tools and trimmings. I used to be a Pilot; I got my CPL/IR (A & H) license in the USA when GPS was not even invented, and pilots were not systems or PlayStation operators; navigation, especially in the West, required real piloting! Your Aeronca Chief is a Pilot’s Airplane! I lost my medical due to health problems, so I spend my free time (and I have a lot now, being retired) tinkering in my shop. I repeat again: I learned so many things from your videos that I’ll wait for your next one, checking your channel daily. I have no space for a steam engine, and my wife stubbornly refuses to let me place one in our living room, but I tell you, I’m missing one! Just for the heartbeat noise and the constant need to tend to those simple but fascinating mechanisms. Keep going, please. Never give up. All those pearls of knowledge and experience you pass to your viewers aren’t lost forever. this way. Please forget my English… It's not my mother language… Paolo from Italy

@davidrichards5594

4 ай бұрын

Thanks for the great comment, good to hear from Italy. I hope to get more work done on restoring the steam engine this summer. Thanks for watching.....Dave

@donaldfuck

3 ай бұрын

I'm from Italy too. This is a great and precious channel. Thanks David

I'm a patient man but I was getting a little concerned and was getting ready to send you an Email, thanks for the relief your obviously in good health, thanks for all you do🤗😎😎

Those old gears had seen better days.

@johngibson3837

8 ай бұрын

They looked past Thier best mate

Damn it's good to see you friend. Welcome back.

Great to see you back!! Been waiting for a new episode

Beautiful work as always. I don't mind saying I was starting to get more than a little concerned about your absence.

Super to see you posting vids again.

nice to see your doing well and welcome back

Old machines are a lot easier to work with than old computer programs. Great video as always. Thanks.

Good to see you back!

YOU'RE BACK!!!! Been wondering how you are doing.. Russ

Good to see that you are still alive and kickin’ Dave. You still post about the most enjoyable machining content on KZread. Just about everything that you do, the average guy can relate to and learn from and that’s great. Thanks

Bonjour David, Happy to see you back after more than 7 months ! Amicalement, Raphaël

Good to see you doing well!

Glad to see you back

Impressive technology! Thanks for the look. BTW, good to see ya back after the summer of 2023.

Always great to see your content hope you continue to make a lot of it

Welcome back old friend was beginning to fear the worst 🫣

David, good to see you back.

I am still amazed at how quiet the steam engine is. It must be so relaxing working in your shop. Thanks for the video.

@johngibson3837

8 ай бұрын

It make you realise that the past ways were sort of quiet or soothing, steam or wind or water. Did miss the clock on this one tho

Great to see you Dave thanks for sharing with us

Welcome back. Hope you're doing well. Greetings from The Netherlands

woohooo !!!! THE MAN IS BAAAAAAAAACK !

Wow awesome shop and your skills and knowledge are amazing it’s amazing what the old days were like and those guys built some amazing things with primitive technology compared with today’s stuff thanks for sharing and keeping this old machines alive

I make a living on a 1948 Bucyrus Erie 22w cable tool drilling rig. I love love to see old machinery still making it go in today's world. I'm a firm believer nothing made in our current age will out perform what our grandfather's made. Thanks

Just the other day I was thinking of a number of KZreadrs that I've haven't seen a video from in a LONG time and one of the ones I was thinking about was good ol Dave Richards !!

Thanks Dave! You just made my day!

That is the same boring bar that I had in my automotive machine shop. Brings back memories. I looked for you at Kinser this past August. If you were there I missed you.

I have missed your videos, glad to see you!

Ah, memories, memories, of shop and steam. many thanks from UK.

If there was ever a large scale Emp attack, or a solar flare event, this place would be worth its weight in gold.

Nice work on beautiful old machines.

Welcome back! We sure missed the Old Steam Powered Machine Shop!

It's good to see you back David, thanks for sharing.

It finally cooled down to where you can fire things up again. 👍

@davidrichards5594

8 ай бұрын

That's the truth....Dave

Awesome a new video. Been looking forward to another one Keep well Dave!

Dave good to see you hope all is well it is always worth the wait. Like you I am stuck in the old ways it seems simple, after all it's all in the set up. Have a good time my friend time is what's left Paul.

Hey, Good to see you!!! I always stop everything I am doing to enjoy watching your stuff. There is a KZread vidio I think You will really like that recentley came out titled: Abandoned Steam Engine Brought Back to Life! - 1908 Industrial Time Capsule. It has been preserved, untuched, kept seceret & hidden in an old waterworks building for YEARS & was for the most part intact & just as good of condition as the day it stopped turning✌👍

@gregsadkins

8 ай бұрын

That is an incredible video, btw. There’s an open house tomorrow and I will be there!

just found your channel and i'm speechless- hats off to you sirs!

Glad to hear from you again Mr Richards!!

Welcome back. It always brightens my day to see another video from the line-powered machine shop.

David, Good to see you back. You have been much missed. I grew up in a similar shop that my dad had. Wasn't steam powered but machines of the same vintage. It was sold to protect my Mom in her older years. I'm 80 now and still machine in a shop I've put together, about half the size of yours. Filled with wwII era machines.Thank you for the fine videos.

I love seeing these old tools with the old texts and beautiful posts coming out. Thank you for keeping the light alive and the beautiful machine tools.

Great video Sir, I thoroughly enjoyed it.

Glad to see you are alive and well! Thanks for posting another video.

Gday Dave, fantastic to see you again in the workshop and it’s good to see Tom is there as well, I’ve missed seeing your videos, the 3 pinion gears turned out great, the new over arm support made a big difference to the rigidity, brilliant work as always, cheers

Hi Dave. Thanks for posting another job. Always learn something and it's much appreciated.

Nice video. I worked in a factory in the 1980s. We had an end mill that we used to cut keywys in shafts. It was similar to the end mill at 18 minutes but more enclosed. An employee was running it, and he had leather gloves on and was brushing out millings from the cutter. His glove got caught in the cutter. It drug his arm in and split his arm in two up to his elbw. He ended up healing and losing some use of his arm. To this day, he still wears a compression sleave on his arm most of the time. Lesson learned, I guess.

fascinating !!! Thanks for this upload and explanations

This is so cool to see you guys working old school. Im a conventional turner / miller. When i went to school there where no cnc machines. But conventionals on electric machines you guys do it with steam driven machines. I love the sound of the old machines and steam. Keep it up guys Greetings from the Netherlands.

@davidrichards5594

4 ай бұрын

Glad you are watching from Netherlands....Dave

Steam engine free energi, Good job sir..👍👍

I am very glad to see you back in your shop!!!!! ❤

So glad to see you're back! :)

Happy to see you back.😊

Really glad to see You back with Your videos David .You have been missed by many I'm sure . Thanks very much .

Nice to see you tweking in that beautiful steam shop !!

Glad to see you,thanks for the video.

A Dave Richards video! ...dropped everything - can't leave until I hear everything Dave has to say.

Great see you back working in the shop keeping that history alive amazing what could be done 100 years ago with precision and steam power thanks again Dave for sharing with us

Wish I could LIKE this more than once!!!!

Good to see you back in the shop Dave great work as always.

Glad to see you back Dave

Great to see you back

Sure was nice to see you lighting the boiler! I am now over 80 and don't need glasses. I just take it straight from the bottle! Keep going, Dave! Mike down in Virginia

@davidrichards5594

8 ай бұрын

I'm almost there, but have a focus problem....Dave

Cool old machine shop, that would be the place to work when it's 40 below zero outside.

Thanks Dave , great to see you back ! Hope all is well ..........

Good seeing you Dave, always looking forward to seeing your video. Take care of yourself.

Great to see ya again Dave and hope you are doing well! Have always enjoyed this channel, and just wonderful to see some new content.

phew; thought something had happened - great to see you back.

It’s Sunday,new video,you are in the shop,life’s great,thankyou.

Glad to se you again!

Hello sir! Nice to see a post! Thank you !!! Hope all is well as can be in this Idiocracy of this world today!! We need people like yourself ! It will be people like you that will instrumental in rebuilding society and they blow it all up! Burn it all down!!!! As long as we can survive!

This new video made my day! I love watching you work, listening to the machinery run, and reliving found memories. I'm truly happy to see a new video!

Great to have you back. Quite a difference between the old and new gears LOL.

Cool editing trick to make the indicator fade away - Nicely done!

@davidrichards5594

8 ай бұрын

Anything cool happening with this editing program is just luck...Dave

Glad to see you back, Dave, keep up the good work, Jim

great to have you back really enjoyed the time at your shop dont seem like allready been a year

great to have you back!!

Good one Dave . Great to see you back . 👍

I hope you charge a fair amount for the shop time. You deserve it! Great job! Thanks for sharing, Dave

Very nice David, enjoyed.

Greatings from Germany. It's nice to see this way of machining. Go ahead and take care of yourself.

Hi Dave, great video, look forward to seeing you at the Florida hideout soon. Regards from Catskill New York

@davidrichards5594

8 ай бұрын

Hi Ron (The Cannon Man), Thanks, I'm turning some of your brass this week.....Dave

Love the early indicator - one step up from the scribing block. What a great channel. Cheers

That looks great , nice to see the shop running.

So satisfying to see a replacement part come to life..

I'm thrilled to see you back and looking good. A real improvement with the addition of the braces. I can see it's really added to the rigidity of the machine. Fabulous job on the gears.

Thanks. That was the most understandable explanation of a dividing head. I’ll never use one but it won’t be a mystery.

Always a pleasure to see an upload from you, Dave. Thanks!

Boy The Same tools today are No Match for The Genius of Yesterday's!

Good to see you back in action. I thought you had went to poop and the hogs ate you or something.

@davidrichards5594

8 ай бұрын

Not yet.....Dave

Looks real good, glad to have you pop up on my feed gain.

Looking great David , and it's great to see a video from you

Always nice to see steam shop hasn't seized up.