Awesome video! Beautiful work. Very nice of you to answer questions in detail.

NICE! Thanks for sharing your secret! The finished product looks wonderful.

Came across your video and loved it. Nice looking grinders as well. Thanks for sharing

I made it because the design is pretty. It's really the best style I've ever made. Thank you for making the process public.

Really cool pepper pots.

Nice job. Looks great!

@timgregory9456

5 жыл бұрын

Thank you

Hello Tim, nicely done! Any chance you can share the dimensions, etc.?

This is brilliant, I make a few salt and pepper grinders but the drilling is not easy. Will have a go at this method.

@timgregory9456

3 жыл бұрын

That is the best part. It makes life much easier.

Very nice but how do you drill the hole through the top where the mill rod goes through?

WoW!

@timgregory9456

5 ай бұрын

Thank you

👍

Any way you can do a video about that buffer/stand you were using?

@timgregory9456

6 жыл бұрын

jkitchens71 - I use the Beall Buffing System. I’ve used their adapter to connect it to an antique electric motor I had lying around. Cobbled the stand together. I may do a buffing video on my new channel The Shop Teacher in the future if you’d like to follow me there. www.bealltool.com/products/buffing/buffer.php

very nice pieces what angle cut was the blanks you glue together

@timgregory9456

8 ай бұрын

These were 15* butr the angle dependds on the # of staves

What is the length of the stave and height? Also what is the width from angle to angle on the stave at the bottom? What is the thickness and height of the walnut pieces?

@timgregory9456

5 жыл бұрын

Length of staves are 15" for a 10" grinder. All material is approximately 1" thick. The distance from angle to angle varies but is usually 1/2-5/8". Walnut was 1/8" thick I think.

How did you make the stave for the top piece without there being the hole in it?

@timgregory9456

Жыл бұрын

It’s not a stave. I drilled the stave hole out to 1-3/8” and turned a plug that fit it. Left it a little long to go into the body.

Thanks for sharing an abundance of skills. May I ask, how do you keep the top piece of brass from unscrewing, everything I use the pepper mill? If I continue turning clockwise, the top wood jams against the bottom wood. When I turn it counter-wise, the top brass and the top wood unravels and comes apart in my hand. Thanks.

@timgregory9456

4 жыл бұрын

I’ve never had that problem. I use pepper mill kits from Chef’s Specialties. There is a small “washer” with a square hole in it that installs in the top. Sounds like that is missing.

@frerecampbell9291

4 жыл бұрын

@@timgregory9456 OK thanks for diagnosis.

wieviel Grad ist die Winkel Einstellung an der Kreisäge?

@timgregory9456

2 жыл бұрын

es hängt von der Anzahl der Notensysteme ab. (360/Anzahl der Notensysteme)/2

Do you sale plans with the angles and dimensions?

@timgregory9456

4 жыл бұрын

Deborah Wilson no, sorry.

@pajonate

4 жыл бұрын

If you want 2 1/2 ring (usual size for pepper mills), cut 12 trapezoids out of plank of wood, 3/4" or 7/8" high, 5/8" on the longer base, and the sides are on 75 degrees towards the smaller opposite side. In between strips are rectangular and your overall diameter will increase based on their thickens. The 12 trapezoids glued alone, will make 2 3/8" diameter ring, and with the inserts you can increase that to your desired diameter. There are couple or online calculators for segmented work , easy to use and very accurate. (blocklayer dot com and marleyturned dot com are the ones I like, but there are probably others too).

Since the middle is hollow

What angle are staves cut

@timgregory9456

Жыл бұрын

These were cut at 15*. It’s figures by dividing 360 by the # of angled staves you want and then dividing the result by 2. Ex. 360/12=30. 30/2= 15

how angle to cut

@timgregory9456

4 жыл бұрын

360/#of desired stave. Then divide that # by 2. Ex: 360/12=30. 30/2=15. Set the saw for 15*

What are the angles on the staves?

@timgregory9456

6 жыл бұрын

360/# of staves you want. Then divide that # by 2. Example: if you you want 12 staves like the one shown- 360/12= 30 30/2=15. I set the saw blade to 15 degrees

Good video but I can’t finish watching because of the gd awful music repeating.

@timgregory9456

4 ай бұрын

Sorry