STATIC PILE LOAD TEST | Preliminary Pile Loading Test | Construction | ANIF GAFFOOR
Static load testing is an in situ type of load testing used in geotechnical investigation to determine the bearing capacity of deep foundations prior to the construction of a building. It differs from the statnamic load test and dynamic load testing in that the pressure applied to the pile is slower.
Пікірлер: 20
Thank you brother.
Thanks
2.50 times of safe load to be use for test load as per is 2911, part 4, 203.
Thank you for the video! This will help me for my assignment
@ANIFGAFFOOR
Жыл бұрын
❤️❤️ welcome, I try to make separate video for construction and make more videos like.
Usually what is the age of the pile to be tested?
Very nice bro thank you so much ❤️❤️❤️❤️👏👏👏👏👏 Keep it up, I'm waiting for next pile testing video❤️❤️❤️❤️❤️❤️
@ANIFGAFFOOR
2 жыл бұрын
Thank you, another test will update soon
@aruneesh4542
2 жыл бұрын
@@ANIFGAFFOOR ❤️
If incase pile test was failure how can rectify..??
Thanku brother
@ANIFGAFFOOR
2 жыл бұрын
Welcome brother
thanks for this video
@ANIFGAFFOOR
Жыл бұрын
Welcome 😊
@osasart
Жыл бұрын
@@ANIFGAFFOOR this is very cool
How much design load of the pile.
@ANIFGAFFOOR
2 жыл бұрын
620 Tons
Please learn fully about the test 🙂
@ANIFGAFFOOR
3 жыл бұрын
Which standard & what code practice is this you’re thinking ???
The test is wrong as the datum support must be 3D or minimum 2 meter away from the edge of the pile which has not been done..