Dang, u guys r pumping out the content!

Thanks guys for the videos!

Any chance you can show the full install of the Warp 9 Stem Lock? You show knocking out the star bolt and then jump to putting the direct mount stem on. How tight does this need to be? Are my spacers going slightly above the tube and then tighten the nut on top(how tight?). Does not look like there are any instruction or pdf's for this. You guys do stuff fast, some of us need to see it slow. Thanks for all the great content!!!

@Talariaboys

9 ай бұрын

Yes spacers go slighly above steer tube, tighen tight but nothing crazy tight.

@HummerH-mo4cs

5 ай бұрын

when reinstalling the front fender did you have to drill a hole in the fender to fit over the bottom of the stem lock ?? some other vid showed that. Seems weird to do that.@@Talariaboys

@cliffxy_3462

3 ай бұрын

@@HummerH-mo4cs talaria boys just replied to my comment about the Fender. They answered it their

That bike looks so sick 🔥🔥🔥 blue KO will looks so good on it good work guys 👍 I am waiting for my Talaria sting R to come next month I can't wait.

Looking good team 👍

I got the warp 9 axle block but it didnt quite fit into the grooves on my month old mx4. Im gonna hit up their customer support and I just went back to the og axle blocks after installing my 54 tooth sprocket

Love the chain tensioners. I have the same bars on the gritshift riser stem, I like your warp9 stem better, what did you screw the top cap down to since you drove out the star nut? I'm going with the 48 tooth rear sprocket for now, I'll upgrade possibly later to a higher tooth sprocket, I can wheelie over stuff with the 44 so maybe the 48 will give me a touch more snap. Great vid guys as usual!!

Talaria Boys, I watched a video yesterday about a guy riding a Talaria; he switched his chain for one that wasn't as stiff. He claimed he was able to get about 4 mph increase in maximum speed. The video looked convincing because it was a before and after type with both chains.

@yevgeniylankin7032

10 ай бұрын

I’ve swapped to a non o ring chain and noticed as well I had to use less throttle to get to same speeds prior. You’re basically removing a restriction on the chain and getting a much smoother and easier acceleration.

It’s a good day when talaria boys posts

My sting r is coming tomorrow 🎉

I have a question?. can you use the warp 9 handlebar mount with a xxx display? it looks like it wont fit but havent tried yet

Hey T-boys great videos !! .Question ... Any new front light ideas lately. Not really feeling the GritShift Blinder. Thanks again !!

@Talariaboys

5 ай бұрын

We have been custom wiring in some pod lights from china but it requires some trial and error and custom wiring

Congrats Reed! I know you guys do mostly off road riding, but would you consider doing a video with supermotos?

@Talariaboys

Жыл бұрын

We have some on the way! We will make the video soon.

Could you guys drop the links to where you got everything like you did in other videos? I’d like to get all that stuff

@JoseDiaz-uv6sj

Жыл бұрын

Same :)

Do you guys have any tips or recommendations to get the brake pads to not rub on the rotors when you first get these bikes? I've tried so many different things and I cannot get it set to where it doesn't rub.....front and back.

@freerfixedit

Жыл бұрын

Try centering your calipers… loosen the 2 Allen’s holding the calipers on, squeeze the brake lever and hold it while you tighten the caliper bolts back down. This should center the caliper and make it to where there is equal space between the pad and rotor, and prevent scrubbing

Was there any issue putting your front fender back on seeing how the stem lock sticks out a bit on the bottom? Thanks for the content!

@Talariaboys

6 ай бұрын

We just tighten the bolts as far as they can go with the stem lock in the way. You should use lock tight to keep them in place.

Did you guys have any problems with fed ex delivering the bike ? mine says it has a delivery exception. and i hope it still arrives on time.

@Talariaboys

Жыл бұрын

We didn’t have any issues, hopefully you can get it figured out!

Hey does that bar mount from warp 9 stop it from rotating on the forks? Like does it bolt to the triple tree?

@Talariaboys

Жыл бұрын

Yes it’s a direct mount stem so it mounts like you said, we use the warp 9 stem lock as well which really ensures everything stays strait! The bike feels really solid up front with this setup.

Great video! Quick question: how did you put the front fender back on because doesn’t the warp 9 stem lock pops out a bit from under. Did you drill a hole into the fender?

@Talariaboys

3 ай бұрын

We just put it back on normal except it sits lower because of the stem lock, the bolts are barely long enough still but we put blue lock tite so they wouldn’t come out from vibration.

@cliffxy_3462

3 ай бұрын

@@TalariaboysThankyou

my dudes!!

Does the 110 chain need to be cut to fit the 52t or is it a direct fit?

@Talariaboys

Жыл бұрын

110 is direct fit but most chains come 120 link so you’ll need to cut it down if you don’t buy an exact 110 link chain.

Hi new to the talaria game. Does the riser bar make the riding position more comfortable?

@Talariaboys

9 ай бұрын

Yes it definitely makes it more comfortable.

Quick question, does the sting and sting R have the same frame?? I was curious because I was lookin for a decal kit and they obviously don’t have them out yet. Lmk thx guys great content 🤙🏽

@Talariaboys

Жыл бұрын

Yes the frame is the same and all existing decal kits will work! We are working with Sticker FX on some custom kits coming to our channel soon, If you buy from their website, this link you can use the code TALARIABOYS and get 5% off.www.stickerfxgraphics.co.uk/

@TBJ_X_VISUALS

Жыл бұрын

@@Talariaboys awesome thx bro. I actually make decals so I’ll probably print my own but I really needed the measurements. I have the the old sting measurements so we’re good. Ya keep killin it and making content and I’ll watch guys. Stay up and stay safe.

What exactly does the stem lock do? I have a direct mount stem and just used the existing steerer bolt. Am I missing something?

@DaBinChe

Жыл бұрын

since the fork is a bicycle design, the headset is preloaded by the star nut inserted into the steer tube. The star nut isn't as solid, can give and loosen from the vigors of a motor/heavy bike that a star nut was never designed for. The stem lock clamps down from a "nut" that inserts from the bottom of the steer tube so headset holds it preload

@AdventureContinuesAgain

Жыл бұрын

@@DaBinChe Interesting info. Do you think some sort of clamp on the steerer tube where the spacers are would work? Kinda like a seat post clamp....

@DaBinChe

Жыл бұрын

@@AdventureContinuesAgain That is how a bicycle handlebar clamp works. The star nut only preloads but does not hold the actual forces that is why when you do the direct mount/top triple tree bar clamp you have to do the stem lock too.

Hey, comparing to the stock sprocket, does the 58 tooth sprocket make the power come too fast and does the rider have to be more careful when increasing the throttle?

@Talariaboys

Жыл бұрын

Yes the power comes on much faster and you need to be careful to not wheelie over backwards, If you arent planning to upgrade your controller I wouldn't go larger than a 52 tooth on the sting R

@RobertF-cs7fx

Жыл бұрын

@@Talariaboys Thank you for your input

Yo, When will u be doing a 72v battery upgrade and controller upgrade. That will be exciting

@Talariaboys

Жыл бұрын

Won’t be long 🤫

Thinking about getting the 52t on my Sting R. What chain linkage is needed for it?

@Talariaboys

Жыл бұрын

110 link for a 52.

@elevator-_-6083

Жыл бұрын

@@Talariaboys Thanks.

What pegs do you guys use? I’m hopefully trying to save up for a talaria mx3 but it is so expensive.

@Talariaboys

6 ай бұрын

We all use warp 9 pegs. If your on a budget I would recommend Luna cycle pegs

@user-bn5ue2sl3s

5 ай бұрын

@@Talariaboys thanks

OK boys I have a question my talaria R is on the way I am going to switch to 17 inch wheels. I was wondering what rear sprocket would keep the same 53 mph TopSpeed as the stock wheels have.

@Talariaboys

Жыл бұрын

With 17 inch wheels I believe a 40 tooth sprocket would be the closest to stock speed.

@phat56pat

Жыл бұрын

@@Talariaboys really I would have thought bigger?

@Talariaboys

Жыл бұрын

No, smaller wheels make the top speed slower so you need a smaller sprocket to go faster. Bigger sprockets make the top speed slower but have more torque.

can u show us in a video exactly how much slack u should have in your chain

@freerfixedit

Жыл бұрын

kzread.info/dash/bejne/hKNqlqesgtKfeLQ.html

How tall are you guys? Im 6'2 and worried the Talaria Sting R might be too small for me

@Talariaboys

Жыл бұрын

Lance is 6’3 and is happy with how it fits, Reed and Alex are 6’ ish

You said you were running your chain at 110 link with the 52 tooth sprocket but the warp 9 web site on there little table says 108???

@Talariaboys

Жыл бұрын

The chart on there website is for a Surron, the talaria is usually 2 links longer.

@ryanbraccialini888

Жыл бұрын

OK cool got it. Thanks

@ryanbraccialini888

Жыл бұрын

Dang those guys at warp 9 didn't give you a discount code for us lol.

@Talariaboys

Жыл бұрын

Sadly they did not. There stuff is worth it though!

Wish ya woulda shown the steps and actually showed install on the axle blocks

DUDE WHAT ARE THOSE PEGS

@Talariaboys

10 ай бұрын

From warp 9

@realkidcarter

10 ай бұрын

i just want to know that they will fit 100%@@Talariaboys

@realkidcarter

10 ай бұрын

i literally went through all of yalls video trying to see if yall talked about them once@@Talariaboys

@realkidcarter

10 ай бұрын

no, the ones on the mx4 in this video, i think i've found them on ebay, suzuki pegs i ordered them@@Talariaboys

@Talariaboys

10 ай бұрын

The pegs I had in this video were from Alibaba, they did not fit very good so I upgraded to warp 9 pegs later

do you have an email address...thanks...marc

@Talariaboys

Жыл бұрын

Talariaboys@gmail.com