Start button relocation Cheap ruckus Mod
Автокөліктер мен көлік құралдары
Ever wanted to relocate your start button but don't want to deal with the wires. Well here ya go, just get yourself a momentary switch, place it where you want and watch this video.
The button I used:
amzn.to/2JZEUjK
See the list of all the parts I used:
shop.SEVProductions.com
NOTE: I am not an expert but more of an enthusiast who is trying to build experience. Please feel free to ask questions in the comments or resources like 49ccScoot forums on the internet (Great Place!)
For China bikes for SURE go to Chinariders.Net
NEW PARTS STORE:
All the HONDA RUCKUS Stuff I used and All Available Lifan KP Mini parts.
shop.SEVProductions.com
NEW Patreon Page! Want to support the channel?
/ smallengineve. .
Facebook [Give me a like]
SmallEngineVelocity/
KZread [Like and Subscribe]
/ smallenginevelocity
Instagram
@SmallEngineVelocity
Canon EOS M50 with EF-M 15-45mm (My camera)
amzn.to/31tBook
Movo VXR10 Hot Shoe Directional Mic (My Mic)
The best sound of ALL the mics I've purchased
amzn.to/31Db0bM
GoPro Hero 7 Black
Just go with the best. It's worth it
amzn.to/2IBxJwa
Пікірлер: 31
👍 But I waited too long to see lol. That button can come in handy for many things -- flasher on head lights. Add an emergency relay and use as a rear flash for when cars get too close to you or anything else you can think up. Good show.
Great video! I don’t have a zuma, not a ruckus, but I’m sure this will translate to what I’m wanting to do.
My rtx those not come with kill switch on handle but got starter switch & emergency flasher! I took off lollipop mirrors & put in handle bar end mirrors black foldables 3 1/4 "- 7/8".
Nice mod bruv'
Sweet
Nice mod
Hi bud. Thx for the video. Do you know where or how to connect a device to the ignition on cable or part? I bought a dual camera system and needs to be connected on the ignition on. The brand is vifio mt1. Thx ☺️
What throttle and grips setup do you have?
I came here to see you drill the holes for the switch. So I can do something like it . Was it easy ?
use a inline crimp to fix the ecu wire before it pops out again. i wired my CDI so the engine kill still works.. it was important for me as a safety measure
@SmallEngineVelocity
5 жыл бұрын
I can agree for quick shut offs , but you are much more advanced than I am for sure
i used two new pins and did a "u turn" so that the two black wires are connected. i found it easier to use a service manual instead of trying to cut and figure out which wire is what
@SmallEngineVelocity
5 жыл бұрын
The way I did it was much more entertaining:) your right a wire diagram would have worked better
Interested in the bulky handle controls if you ever swap them out 😎🤙
@SmallEngineVelocity
5 жыл бұрын
Probably this weekend they will go but I want to hold on to them for a week or so just in case I don’t like my changes
JR Racing card anyone? Thinking of going back to stock carb or does anyone know where to get the Throttlebody and harness for the new EFI Ruckus?
How do I mount highway pegs on 2003
Now you just gotta install the front end kit and a new throttle
@SmallEngineVelocity
5 жыл бұрын
Hmmm maybe I will
0:22 scoot scoot scoot scoot scoot scoot scoot scoot
@EbolaSquirrel
4 жыл бұрын
dont mind me just avoiding studying
Going to relocate the start button too haven't been able to get it to start since I bought it always kickstarted it. 😐😣Hope this helps me
@SmallEngineVelocity
5 жыл бұрын
Yea use the wires I figured out , let me know if it helps
@zues0o
5 жыл бұрын
@@SmallEngineVelocity I will keep you posted.
@zues0o
5 жыл бұрын
Bigger issue than I expected I have no power when the key is in the on position.
Can you help me I have a honda ruckus but it won't star I have a new battery and wont star..! Can anyone help me please
@SmallEngineVelocity
4 жыл бұрын
What you said it will not start , it turns over but won’t start or nothing happens
How did you kill the power with key? I hook mine up the same way and won't shut off
@SmallEngineVelocity
3 жыл бұрын
I turn the key to shut off
@jdmskunk2
3 жыл бұрын
@@SmallEngineVelocity mine stays running. I found the black/white wire on cdi wasnt allowing me to get spark i cut that wire and it started but have to touch together to shut the bike off
@jdmskunk2
3 жыл бұрын
@@SmallEngineVelocity do you have a Facebook page to pm you?