Correction: Anakin's lightsaber

@BRGriffin

4 жыл бұрын

Before it belonged to Luke.... it was a photographer's flash bulb. ;)

@kadensvlogs7824

4 жыл бұрын

Brandon Griffin it belonged to a Anakin first

@killelmo

4 жыл бұрын

Kaden tswm It was a joke, the Original light saber was made from a cell 3 graflex flash off of a camera.

@williamchandler3855

4 жыл бұрын

Good job bro,finally someone who is smart!

@EzDyt

4 жыл бұрын

IT DOESN’T FUCKING MATTER In fact, it belonged to Luke before Anakin!

Based on several requests I just added a detailed parts and tool list to the comments section above.

@starmix7579

6 жыл бұрын

Make It or Break It can you Please send me a replica only the hilt E-mail jairwey@icloud.com

@RobLandquist

5 жыл бұрын

Can you post the templates you used?

@jakyoso8236

4 жыл бұрын

You mean description?

This is BRILLIANT!! Need to make one soon! Thanks so much for sharing Anakin's 2nd Lightsaber build!

@MakeItorBreakItNow

4 жыл бұрын

John, glad you liked it. Thanks for taking time to leave a comment. I'm finishing up my Darth Vader lightsaber, planning to post it this weekend... Stay tuned.

Part 2 of the Skywalker Lightsaber build can be found here: kzread.info/dash/bejne/o4KFypWveq3Ogqw.html

I’m working on a lightsaber for my game room just a wall mount display and been looking around for great ideas even two years ago some of your solutions are a stroke of genius. Good show I’ll be using this video as my main go-to video. Thank you

@MakeItorBreakItNow

4 жыл бұрын

jackOcat, If you like that one you might also be interested in my Darth Vader lightsaber build posted last week. You can find it here. kzread.info/dash/bejne/iKSkpZeoery-eqQ.html

Here's a link to the final part of the build where you'll construct the blade that goes with the Skywalker lightsaber hilt: kzread.info/dash/bejne/nJqEyrCqgcu2eLQ.html

Amazing. Looks better than some that are $100+ Thanks for the tutorial!

@MakeItorBreakItNow

6 жыл бұрын

Revo, thanks for the compliment and the comment.

If you like this video, make sure to checkout Part 2 and the Blade build available here: kzread.info/dash/bejne/o4KFypWveq3Ogqw.html kzread.info/dash/bejne/nJqEyrCqgcu2eLQ.html

Completely fantastic. Thank you

@MakeItorBreakItNow

3 жыл бұрын

Daniel, you're quite welcome. It's was a fun build, almost fun as my Darth Vadar hilt: kzread.info/dash/bejne/iKSkpZeoery-eqQ.html

Love how you approached this. You deserve more subscribers.

@MakeItorBreakItNow

6 жыл бұрын

Thanks Ziggy, appreciate the comment, please pass the word on my videos to those who might be interested. Working on a Darth Vader version now.

This video is my saving grace. I'm looking into doing a Luke cosplay from ANH, and all the saber projects I've seen are either horrible quality or extremely expensive. This one here is very good quality, especially for the price!! You should be proud of yourself!!

@MakeItorBreakItNow

6 жыл бұрын

Nerdy Dalek, thanks for the comment and kind words. I strive with all my projects to show folks like yourself how to get the best build for the lowest cost. Glad you like it. Plan to post my 2nd ANH Luke costume soon.

@nerdydalek2981

6 жыл бұрын

Thank you, and I can't wait!! Just one quick question, where did you get the cutting templates at the beginning?

@MakeItorBreakItNow

6 жыл бұрын

go to switz.tripod.com/saber3.html then scroll down to the blue template and click. It should come up for you there. His build is a different approach than mine but still good although he's taken a write up versus video tutorial. Wasn't trying to use his template without permission. He stated in the article he found on the internet and wasn't sure where he got it from so its a bit of a mystery, but it works for the top of the hilt. I've seen it repinned all over Pintrest but can't find the original site. But now I'll search a bit more for the originator to ensure whoever sketched it out gets credited. I'm certainly NOT about stealing other people's hard work since I've had it happen to me already on several occasions without attribution. If anyone finds out who the person is please leave a comment so I can follow up and give credit where it is deserved.

@kadensvlogs7824

4 жыл бұрын

What the heck does ANH mean?

@kadensvlogs7824

4 жыл бұрын

Oh wait does it mean a new hope?

You're a genius! Definitely gonna try this. Thanks for sharing.

@MakeItorBreakItNow

6 жыл бұрын

Finnick, thanks for the feedback. Working on a Darth Vader light saber now I plan to have out soon.

Clever and amazing approach.

@MakeItorBreakItNow

6 жыл бұрын

Thanks Yorgan, appreciate the feedback.

The proper name for that lightsaber would be "Anakin's Skywalker's 2nd Lightsaber", not Luke's, not Rey's and not Anakin's first which was destroyed on Geonosis.

@MakeItorBreakItNow

6 жыл бұрын

Mcfarlanect, thanks for the feedback. Good point, and most accurate.

@vile4896

4 жыл бұрын

Make It or Break It it’s all of theirs, legally speaking it would be inherited since anakin is dead, even when Luke fights him, Darth Vader himself said he does not accept the lightsaber in a comic, because he’s not anakin, he “killed” anakin. It was lost and ended up with maz, who gave it as a gift to Rey, gifting is a transferring of ownership, don’t listen to all these people trying to nitpick details, cuz theyre wrong lol

@ernestscott7231

4 жыл бұрын

Chickoners I saw that vid

@g_montes4456

4 жыл бұрын

Anakins first lightsaber was like a combination of Vader’s and his second.

@the_real_lego_commander_co6685

4 жыл бұрын

Yeah but saying Anakin’s lightsaber is good enough

Best and cheapest tutorial I have ever seen

@MakeItorBreakItNow

6 жыл бұрын

Thanks Nathan for the feedback and kind words. Working on a Darth Vader lightsaber now, plan to have the video out soon.

Thanks for making this

@MakeItorBreakItNow

5 жыл бұрын

Ben, glad you liked the video. I'm going to make Darth's lightsaber and Rey's new version ideally before the next movie comes out. Stay tuned.

Really great build. Everyone not using a graflex seems to struggle on the "bunny ears" bit, but I'd say your approach yields the best results outside of buying a gralfex

This is actually better than those $200 replicas Great Job!

@MakeItorBreakItNow

6 жыл бұрын

Thanks Ethan, I'm currently working on a Darth Vader, version which I'm planning to post soon. Stay tuned.

you are bloody brilliant :) it's really nice to see a fellow maker this good

@MakeItorBreakItNow

6 жыл бұрын

Atilla, thanks for the compliment and the feedback. I'm working on a Darth Vader light saber and plan to have it posted soon.

@atillaEryavuz

6 жыл бұрын

Make It or Break It i just made one for 12 bucks m.facebook.com/CreativeCrafterCosplay/?ref=bookmarks if you want to check it out :)

@MakeItorBreakItNow

6 жыл бұрын

Atilla, good job, looks nice.

@atillaEryavuz

6 жыл бұрын

thanks mate

I love Rey's lightsaber!!! It's such a cool design!!

@jakyoso8236

4 жыл бұрын

You are going to get so much comments just for saying "Rey's", be prepared

@MakeItorBreakItNow

4 жыл бұрын

Yes it is, thanks for leaving a comment.

@commscan314

2 жыл бұрын

The yellow one?

Nice job

@MakeItorBreakItNow

6 жыл бұрын

H, thanks for the feedback.

nice video i like this idea because it has sound in it. i ve bought an rechargeable police flashlight for 10$ and im going to turn it into a lightsaber too.

@MakeItorBreakItNow

6 жыл бұрын

Dimostenes, good luck with your build. Let me know how it turns out.

I see you have constructed a new lightsaber. Your skills are complete.

@MakeItorBreakItNow

5 жыл бұрын

Rafail Panagiotidis, thank you. Darth Vadar's lightsaber coming soon.

@rafailpanagiotidis6567

5 жыл бұрын

@@MakeItorBreakItNow Awesome 👌

That’s Anakin, then Luke’s lightsaber. Rey just “borrowed” it... it’s not hers.

@MakeItorBreakItNow

6 жыл бұрын

Anthony, thanks for the comment, all true.

@ACARDtvMusic

6 жыл бұрын

Make It or Break It just giving ya a hard time, haha... nice job though 👌🏻

@JohnSmith19282

6 жыл бұрын

Anthony Cardiali (2nd Channel) sadly Disney market it as Reys

@MakeItorBreakItNow

6 жыл бұрын

John, in the other two parts of the build I refer to it as the Skywalker Lightsaber an yet those videos aren't getting as many views as of yet...

@RobertStorms84

6 жыл бұрын

It's Rey's now son!

Template that will help you in the construction of your lightsaber can be found here: switz.tripod.com/Template04.gif

@nahuelsosa9890

6 жыл бұрын

Hello! this link doesn't work. Could you please publish the template again? thanks

@HomeownerTutorials

6 жыл бұрын

Is this link working for others? All i get when i clean on it is the "this image is hosted by tripod" and the reast of the screen is black.

@MakeItorBreakItNow

6 жыл бұрын

Not sure why the original link doesn't work but try this method: go to switz.tripod.com/saber3.html then scroll down to the blue template and click. It should come up for you there. His build is a different approach than mine but still good although he's taken a write up versus video tutorial. Wasn't trying to use his template without permission. He stated in the article he found on the internet and wasn't sure where he got it from so its a bit of a mystery, but it works for the top of the hilt. I've seen it repinned all over Pintrest but can't find the original site. But now I'll search a bit more for the originator to ensure whoever sketched it out gets credited. I'm certainly NOT about stealing other people's hard work since I've had it happen to me already on several occasions without attribution. If anyone finds out who the person is please leave a comment so I can follow up and give credit where it is deserved.

I am in the final process of finishing mine

@MakeItorBreakItNow

5 жыл бұрын

Ms Jinkerson, Send me a picture, I'd love to see it.

this is ANAKIN"s lightsaber not reys like so many people at myschool get this confused like damn but you said its anakins so good work over all i like the video

@temukadomuzashvili6642

4 жыл бұрын

kzread.info/dash/bejne/h6WTq6qInK7VeKQ.html

Thank you for the video; its always good to see a good tutorial using true metal parts instead of just plastic and foam. I would suggest you to change "Rey's" for "Luke's" or, better, "Anakin's", in order to be more accurate and to avoid a lot of angry comments.

@MakeItorBreakItNow

6 жыл бұрын

Asmuk, thanks for the suggestion and feedback. In the two follow-on videos I called it the Skywalker Lightsaber. But have left this one so far under "Rey" for those looking for the prop from The Last Jedi. In the future I may retitle the video.

@darthbuzz1

6 жыл бұрын

Or Maz Kanata's, she owned for longer than Rey... might as well call it Finn's lightsaber or Snokes because he had it next to him.

Yes I found the rg 59 cable connectors online perfect use for if I’m making a revenge of the Sith saber identical button and the 12 dollar plumbing pipe I could also 3d print anakin sloth furnace I found anis saber pretty easy to make well may take so much metal hack cutting

@MakeItorBreakItNow

3 жыл бұрын

Vahid Hosoda, sounds like you've got it all figured out on your way to mastering the force. Thanks for your comment.

Hello Greetings from the city of Guadalajara Jalisco Mexico. After seeing 2 times The Last Jedi. Start my search for information to create a replica of the lightsaber that Ray delivers to the robotic hand of Luke Skywalker. I really liked your tutorial, because it is very well explained. I hope to find the materials you use in my city. I have nothing but words of thanks for sharing your knowledge. I'm just a 43-year-old Padawan who starts the path of the Jedi by creating his first lightsaber. May the Force be with you.

@MakeItorBreakItNow

6 жыл бұрын

Juan Pablo, thanks for the feedback and kind words. Good luck on your build. Once you build one you might find like me you want to build more. I'm currently working on a Darth Vader version and a Luke Empire Strikes Back version I plan to post as soon as my Jedi Training allows. Look forward to hearing how yours turns out.

Hate the idea of people calling this Rey’s lightsaber. Other than that nice work.

@maplejames6992

6 жыл бұрын

It's not Rey's?

@titantantisunthorn9222

6 жыл бұрын

TREVORVADER actually now that Rey uses it, it's actually Rey's lightsaber. Why do people call it Luke's then, if it was actually Anakin's

@jakenotjake899

6 жыл бұрын

t i t a n t a n t i juts because she uses it doesn’t mean it’s hers. It was made by anakin, and anakin used that. Which means it’s his lightsaber.

@senjuebro

6 жыл бұрын

No, its Aankin's not Rey's, not Luke's. ANAKIN'S

@louclarkson6098

6 жыл бұрын

JakeFranklin well this design is unique to rey. Only in the new movies does the saber have one red button with a glass eye and screws in the grips. Completely different in the original trilogy. So It is correct to refer to this configuration as Rey's.

Interested!!? Stand by. here we go. top man😂😂

Btw the cable ends were BNC connectors, which were on either rg-59 or rg-6 coax

@MakeItorBreakItNow

6 жыл бұрын

Brian, good point. Thanks for the clarification.

Where did you get the templates you used at the beginning?

Youre better than thst nerdy dude on here who is condescending. You got a subscription from me my man

@MakeItorBreakItNow

6 жыл бұрын

Thanks Gaming Kitchen for the feedback and the subscription. More lightsabers coming soon.

@thethe6232

5 жыл бұрын

The Gaming Kitchen Hay Hope that wasn’t aimed at me ? 😃

Where did you get the pipe is it 1-1/2 by 12 or 11/2 by 12 because online there is not a 11/2 by 12

@MakeItorBreakItNow

5 жыл бұрын

Legocoolman, I got the pipe at Home Depot.

@legocoolmanproductions5591

5 жыл бұрын

Make It or Break It thank you but is it 11/2 x 12 or 1-1/2 x 12?

@MakeItorBreakItNow

5 жыл бұрын

@@legocoolmanproductions5591 , 1.5 inches diameter X 12 inches long

Where did you get the front template??

@MakeItorBreakItNow

6 жыл бұрын

go to switz.tripod.com/saber3.html then scroll down to the blue template and click. It should come up for you there. His build is a different approach than mine but still good although he's taken a write up versus video tutorial. Wasn't trying to use his template without permission. He stated in the article he found on the internet and wasn't sure where he got it from so its a bit of a mystery, but it works for the top of the hilt. I've seen it repinned all over Pintrest but can't find the original site. But now I'll search a bit more for the originator to ensure whoever sketched it out gets credited. I'm certainly NOT about stealing other people's hard work since I've had it happen to me already on several occasions without attribution. If anyone finds out who the person is please leave a comment so I can follow up and give credit where it is deserved.

RG-6 or RG-59 is the coax cable, not the ends. Those are BNC connectors. They’re so much better than the f-connectors that cable television uses.

@MakeItorBreakItNow

4 жыл бұрын

Paul Alan Clifford, thanks for the feedback on the cables, much appreciated.

When he brought out the Legos I was like “????”

That is actually the one from The Empire Strikes Back, because of the two red buttons.

@MakeItorBreakItNow

5 жыл бұрын

Stercore, this version has a clear window and one red button. Thanks for the comment.

@KMProductions24

5 жыл бұрын

Sorry, thought it was a red button because of the size, great video anyway.

@MakeItorBreakItNow

5 жыл бұрын

Stercore, thanks again for the feedback.

I dont really understand how you did the black grips witn the floor mats, can you explain in a separate vid?

@MakeItorBreakItNow

6 жыл бұрын

St3athG4ming, I'll trying to go over more detail on the grips in my Darth Vader build i'm working on this weekend, which I'm planning to post soon.

Where can I get the link to the files?

Standing by...

Where did u get the print outs

@MakeItorBreakItNow

5 жыл бұрын

Unfortunately the site is no longer active. I've since found with some paper and a little bit of trial and error you can usually get pretty close.

Were did u get the hilt design

@MakeItorBreakItNow

3 жыл бұрын

SunlessAnt8, I based it on a toy lightsaber I had along with looking at drawings and pictures I Googled. The design elements and sourcing the little pieces were my ideas. Here's a newer Darth Vader hilt I made recently you might be interested in: kzread.info/dash/bejne/iKSkpZeoery-eqQ.html

hey idk if ur ever gonna see this but i was wondering what ratio u printed out the cutouts since it says to print 6x6 but there isnt a 6x6 option on my printer, if u could respond it would really help

@MakeItorBreakItNow

11 ай бұрын

its a bit of trial and error unfortunately since every printer seems a bit different. After a short while you should get something that works. Thanks for your question.

Can you make a tutorial for the Return Of the Jedi lightsaber

@MakeItorBreakItNow

3 жыл бұрын

I've been thinking about that one a lot, if you're talking about Luke's the hilt is easier alone. I font think I've ever seen a version with a blade because of the rings on top. Stay tuned, I have some ideas.

@fatzspizzasafari

3 жыл бұрын

Make It or Break It I subbed!!!

@MakeItorBreakItNow

3 жыл бұрын

Thanks, please share my channel with others if you think they might be interested.

Would you do commisions?

@MakeItorBreakItNow

6 жыл бұрын

Miles Away, thanks for the offer, but I'm not taking commissions at this time.

Where did u get the pipe

@MakeItorBreakItNow

5 жыл бұрын

Robert Allen Wilson, I got mine at home depot and at a discount of $3 so I bought the 5 they had at that price, plan to make the new Ey light saber soon. Lowes or any store with a range of plumbing should have these. Also try your local habitat for humanity where I walked away with several for about $1 a piece.

Can you make a Protection and Defense lightsaber from Galaxy’s Edge?!

@MakeItorBreakItNow

4 жыл бұрын

Ashley Urban, let me what I can do. Will need to look up some pics.

@SingleAngel101

4 жыл бұрын

Make It or Break It you’ll love the protection and defense saber from Savi’s workshop

@MakeItorBreakItNow

4 жыл бұрын

@@SingleAngel101 thanks. I'll check it out.

ITS ANIKINS gosh dang it. I should know I’ve been a Star Wars fan since I was 2

@MakeItorBreakItNow

5 жыл бұрын

Laugh your butt Off, thanks for the comment. I'll add your vote to the others.

I have a better way: buy a cheap toy version and either repaint it or get aluminum foil tape on go over all the grey parts with it

@MakeItorBreakItNow

4 жыл бұрын

Real Bob Ross, thanks for the comment, if you make one using your approach, send me a picture I'd be interested to see how it turns out.

@jakyoso8236

4 жыл бұрын

I mean tbh, the toy ones aren't as accurate

@MakeItorBreakItNow

4 жыл бұрын

@@jakyoso8236 I agree with your thought here, plus the plastic versions are too light, they don't feel the same when you pick them up.

u make lukes esb 1

Aniken’s lightsaber 🅱️🅾️ℹ️

Can you make Kylo Ren’s cross guard saber next?

@MakeItorBreakItNow

4 жыл бұрын

Ashley Urban, I'll add it to the built list. Thanks for the suggestion.

I don't care what anyone says, 5his is Anakin's lightsaber, which Obi-Wan passed to Luke. Then Rey found it and borrowed it.

@MakeItorBreakItNow

5 жыл бұрын

Mike Uchman, thanks for the comment and feedback. accepted.

Can you put a blade on it?

@MakeItorBreakItNow

4 жыл бұрын

Dimo, you sure can, here's my video where I made the blade for this lightsaber here: kzread.info/dash/bejne/nJqEyrCqgcu2eLQ.html you might also be interested in my Darth Vader lightsaber here: kzread.info/dash/bejne/iKSkpZeoery-eqQ.html

Dude the line on the control box is only on the plastic ones because that’s where the connect the two parts of the plastic

@MakeItorBreakItNow

6 жыл бұрын

The Boss Destiny, thanks for the feedback. actually on some official drawings its also there.

@thebossdestiny1095

6 жыл бұрын

Ok I forgot that you were making Rey and Lukes graflex lightsaber I have been working on my anakin revenge of the sith hilt and it doesn’t have the line so you are very good a details

@Simple-zy8vz

5 жыл бұрын

The Boss Destiny actually it is a clamp so the it has a seam in the middle and that is correct

What material do i need to build this lightsaber

@MakeItorBreakItNow

6 жыл бұрын

Alfigri, the materials you'll need are presented in the videos. But since you asked I'll see about putting together a parts list so you can take it with you to the store or when shopping online. Should have one available soon.

@MakeItorBreakItNow

6 жыл бұрын

Alfiqri, please see the parts and tools list now added to the top, "show more" comments section. Thanks again for the suggestion.

i cant find the pipe

@MakeItorBreakItNow

Жыл бұрын

Tobi, check most any big box store like Lowes or Home Depot. That's where I got mine.

Nice. I might try this but with real Graflex parts. The ears were a bit too big looking for my liking :P

@MakeItorBreakItNow

6 жыл бұрын

Joshua, thanks for the comment and good luck. Graflex parts can be hard to come by do you have them already?

Nice job. Templates?

@peashooteranimations8082

4 жыл бұрын

It is on the internet search for graflex template

Alinimum, all kidding man great build

@MakeItorBreakItNow

4 жыл бұрын

neon deluxe, thanks for the positive feedback. Working on a Darth Vader lightsaber now

@neondeluxe9650

4 жыл бұрын

@@MakeItorBreakItNow Oh awesome! Can't wait

Ok

Make count duko’s lightsaber

@MakeItorBreakItNow

6 жыл бұрын

Hansa, thanks for the feedback and recommendation, I'll add it to the list, working on Darth Vader's right now.

All these people yelling “That’s Anakin’s lightsaber!” It’s not. You can tell it’s not by the emitter and the coupler in the middle.

@MakeItorBreakItNow

4 жыл бұрын

JXEditor, thanks for you feedback, and taking time to leave a comment.

@commscan314

2 жыл бұрын

The Force Awakens version is really Finn's, as he uses it far more throughout the entire movie, while Rey uses it at the end.

Anakin's*

Something with the blade in the new one, it looks shorter. And even when Luke wields it, it is shorter

@MakeItorBreakItNow

6 жыл бұрын

jx592, agree it might be shorter in the movie, but not by much. Luke's big hands can make it look smaller than it is. Not sure how big Daisy Ridley's hands are.

@einflinkeswiesel2695

4 жыл бұрын

It's shorter than I expected😂

@commscan314

2 жыл бұрын

In Empire I'm fairly certain they used a different stunt saber that looked more like Anakin's Attack of the Clones lightsaber, and was later reused for Darth Vader's in Return of the Jedi.

very good video but it is difficult for them to leave the template in the description for one TO BE ABLE to make the saber and not have to draw and guess

@MakeItorBreakItNow

2 жыл бұрын

Sergio, its hard to rely on others templates. I've made some of my own for other projects. Lt me check and figure out how best to post.

@sergiodavid5345

2 жыл бұрын

@@MakeItorBreakItNow I am in the process of making the anakin saber but without the template it is difficult for me, do you have any ideas?

The only thing that ever bugs me about these builds is that they always say the bottom part, the grips, were made originally form windshield wiper blades. They were actually originally made from black t-track that is used for sliding drawers. If they had been made from wiper blades, sure it would be comfortable but it would wear out quickly from extended use. The t-track is much more sturdy.

@MakeItorBreakItNow

4 жыл бұрын

Joshua Javens, thanks for the feedback. Very true. I'm not sure the T tracks would be comfortable either. These grips are. I've been to quite a few stores and haven't been able to find the t-tracks. If you have a good source it would be much appreciated.

@joshuajavens1816

4 жыл бұрын

@@MakeItorBreakItNow I can't think of any good sources off the top of my head beyond looking online somewhere. My only suggestion if you were to go that route though is maybe grind down the top parts of the t-track that stick out against your hand. It'll be slightly less accurate but I think it would be a bit more comfortable.

@joshuajavens1816

4 жыл бұрын

or you can cheat a bit and go here: www.ebay.com/i/302943873437?chn=ps&var=601866354740&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=601866354740_302943873437&targetid=857478420934&device=c&mktype=pla&googleloc=9005685&campaignid=6470474296&mkgroupid=76413868734&rlsatarget=aud-622524040958:pla-857478420934&abcId=1140476&merchantid=6296724&gclid=Cj0KCQiA7OnxBRCNARIsAIW53B8XmszjZXCixChCRXH0eY0MN-pCVWpwK00p68A9fSKgyKMkqpIVX0saAiiEEALw_wcB

@MakeItorBreakItNow

4 жыл бұрын

@@joshuajavens1816 , interesting. I might consider something like that next time.

I thought this was anakins light sabre then Lukes

@SethXL

6 жыл бұрын

Martin Hague it is first it was anakins then lukes then rey has it now

@MakeItorBreakItNow

6 жыл бұрын

Martin, you're correct. Lots of folks used this version.

@matttheradartechnician6734

6 жыл бұрын

Martin Hague it is

@TREVORVADER

6 жыл бұрын

Martin Hague it is.

yes, this smells like Anakin Lightsaber

Do you have the template for the hilt?

@MakeItorBreakItNow

6 жыл бұрын

check in the comments above, I posted one version that works, I modified a bit, not much.

@ImRevo

6 жыл бұрын

Mike Meyers I don’t see a comment with the template on this video...

@MakeItorBreakItNow

6 жыл бұрын

just posted, please see below.

@ImRevo

6 жыл бұрын

Mike Meyers Thank you very much :D

@ImRevo

6 жыл бұрын

Also, what is that metal L shaped pipe thing that you used for the hilt?

for the gold bars go find an old game cartridge at a goodwill or savers take it apart and cut off the part that inserts into the console

@MakeItorBreakItNow

4 жыл бұрын

thanks for the suggestion, I'll keep a lookout for the old game cartridges.

@commscan314

2 жыл бұрын

Or find old PC cards, preferably IDE.

Grips were never windshield wiper blades....plastic T track for sliding cabinet doors was used in the original prop.

@MakeItorBreakItNow

4 жыл бұрын

Jason J. you are correct. I've found the floor mats easier to find than the T track. And its more comfortable when dueling.

@commscan314

2 жыл бұрын

The problem with the T-tracks is that you have to find plastic T-track, which really means you have to slaughter drawers for it.

@jasonjulian1

2 жыл бұрын

@@commscan314 absolutely right. I ended just ordering replicas from wannawanga.com.

ArrrrrrrraaaaAAR anakin anakin

@MakeItorBreakItNow

5 жыл бұрын

Carm Reaper, thanks for your comment.

You forgot the rectangles that go next to the screw near the top

@MakeItorBreakItNow

6 жыл бұрын

Good catch. I wanted this to be a simpler version that most people would feel comfortable making. I'm working on a ESB version which will be much more detailed. Video should be out soon.

@thebossdestiny1095

6 жыл бұрын

👍

@camcordernonsense5264

6 жыл бұрын

Make It or Break It Rectangle holes and grooves cuts. Baffle Me. Even hardware stores help around my area can't figure out tools used.

Do you have templates?

@MakeItorBreakItNow

4 жыл бұрын

TyMatthews 1000, unfortunately the templates I used are no longer online. I'm planning to rebuild this lightsaber based on the newest version that will be coming out in December and will plan to post those versions with that video.

@tylermatthews7381

4 жыл бұрын

@@MakeItorBreakItNow thank you.

@gamersinacontainer

4 жыл бұрын

@@MakeItorBreakItNow Could you make templates for the Episode 3 skinnyflex?

Descent build, you messed up on a few details. I imagine that is because you are modeling it after a toy, but unless you show to a super fan no one should notice. Again it’s a solid build.

@MakeItorBreakItNow

4 жыл бұрын

Alex Hansen, thanks for the feedback. It's based on pictures, sketches, and a toy. There seemed to be subtle differences between each of the movies, this version is a best attempt. I'm working on the new version, ideally it will come out prior to the movie. Stay tuned.

Those black bumpers make it seem a little cumbersome and hard to hold....

@MakeItorBreakItNow

3 жыл бұрын

Howard D. you might think so, but when I pick the hilt up it feels real. Like a weapon designed to do battle. Thanks for your comment.

It’s revenge of the sith Anakins because it doesn’t have a bubble strip

@MakeItorBreakItNow

5 жыл бұрын

OT RAPTORGAMEZ, thanks for the comment, and insight.

I unfortunately am not skilled enough or confident enough to even attempt this. I would gladly pay you to make me one of these.

@MakeItorBreakItNow

6 жыл бұрын

MrSupersonic2012,thanks for the offer but I'm not making these for sale.

@MrSupersonic2012

6 жыл бұрын

Make It or Break It Well that's a shame. You could probably make a good business by making these. Especially if it only cost 25 to 30 dollars to make. Either way really enjoyed your video

@MakeItorBreakItNow

6 жыл бұрын

thanks MrSupersonic2012

Everyone that says this is not rey's lightsaber is wrong.She got it in the force awakens and uses it in the last jedi.It became the lightsaber she trained with when she started training with luke.

@darthbuzz1

6 жыл бұрын

@PhoneHacker100 You need a gap after punctuation. That is why you have a link in your text. Thank you.

@commscan314

2 жыл бұрын

I wouldn't jump to conclusions. Rey declined Maz's offer of the lightsaber, and then Finn happily took it instead. Then when Finn gets Kylo Ren's lightsaber right up his back, she pretty much takes it, wins somehow, and that's it. She's borrowing it from Finn technically.

" How to make Luke's Return of the Jedi lightsaber"

@kylecarter5502

6 жыл бұрын

TheOneTheOnly W that's definately not the ROTJ saber. it's the new hope saber.

@John_Wales

5 жыл бұрын

Kyle Carter It’s not A new hope either. That clamp card isn’t on the ANH saber, only on the ESB saber.

@commscan314

2 жыл бұрын

I think that's a request for a video, but I'm not sure.

this dude based his replica on a hasbro toy for kids, the replica ended up looking more accurate lmao

@MakeItorBreakItNow

4 жыл бұрын

MrCowlick, the light saber hilts and all the props I make are based on several references, a lot of photograghs, and even dimensional drawings. The toys are just helpful to see what key details the designers leave in, so as a builder you want to make sure to include those in the final construction. Thanks for your comment.

@mrcowlick7537

4 жыл бұрын

@@MakeItorBreakItNow oh no sir i don't build i just sit on my couch and get fat watching star wars videos 😂

They never used windshield wipers for the movie props. Just saying. Nice build tho.

@MakeItorBreakItNow

4 жыл бұрын

Fern, agreed. Although many folks think they did.. Thanks for the feedback, much appreciated.

Used some alunimum

@MakeItorBreakItNow

6 жыл бұрын

thanks Alex for your comment and feedback.

*Graflex

BNC Connectors

@MakeItorBreakItNow

3 жыл бұрын

Mike C, thanks for the clarification, sometimes when I shoot a video what I say is not always correct.

@mikec9537

3 жыл бұрын

@@MakeItorBreakItNow wasn't trying to be a smart a@@, being a amateur radio op, I know the connectors.

@MakeItorBreakItNow

3 жыл бұрын

@@mikec9537 didn't think you were a smart a@@. I appreciate feedback like yours, it keeps me honest, and makes my future videos better. Keep the comments coming!

So, was it Maz Katana's (or whatever her name was) lightsaber, just because she had it far a while? No. this is no ones lightsaber as it was changed for these films and before long, more people will not take these films as canon. Also, @Make It or Break It I would probably use pictures of a prop instead of a cheap toy if you want acuracy.

@MakeItorBreakItNow

6 жыл бұрын

darthbuzz, thanks for the feedback. Your point of view is interesting.

Why do you all keep correcting him, saying that it's not Rey's? We all know. If you all wanna get technical, it is Rey's now. Anakin is dead, Luke shit canned it over his shoulder, so.... I guess that means it's Rey's now.

@brainstormfilms1113

6 жыл бұрын

The lightsaber is not canon. Anakin and Luke's look much different.

@KiwiFresh

6 жыл бұрын

Well. It’s broken so.

@Sednas

5 жыл бұрын

Only because she uses it doesn't mean it's hers, it's Anakin's, he made it. It belongs to her now, but it is still Anakin's. You don't say that your grandmother's socks she had sown for you is yours, don't you?

@erickf8347

5 жыл бұрын

It’s broke in half so it’s not like that matters now

@Michael-nm8me

5 жыл бұрын

Really we should be calling it the Graflex not anyone's in particular unless its set up specifically for that movie. For example I'm building a Flashgun 5 from Roman Props which is Luke's from ESB

for 25 bucks, this isnt bad. If you have a better budget, check out romanprops.com. They make beautiful replicas of the original parts used to make these props. If you have a wonderfully massive budget, go on ebay and search for a Vintage Graflex 3 Cell flashgun. Thats what the original prop was made from. Other options include the Korbanth Graflex 2.5 saber kit, the Graflex Shop 3 Cell replica, the 89 sabers Graflex, JQ sabers Stainless Steel Graflex, Parks Graflex ESB, the list goes on. If you want a replica of this prop, this is not the end all be all. If you found this video looking for the cheapest replica possible, this works as that. If you are in search of a good replica and just have no idea where to look, Google "Graflex 3 Cell Flashgun"

@jamesoblivion

6 жыл бұрын

I doubt anyone clicks on a $25 home build video looking for "the end all be all."

@MrTitanicfanatic2

6 жыл бұрын

Thats true but considering this is barely classifiable as a close approximation i figured id note some of the other things available since the informed buyers of the saber community are rarely the ones that go on youtube to look for home depot builds. These were how I took my first steps into the saber hobby and if I had known about options like what I now own when I was looking around for these i wouldnt have spent 2 years building these and never being happy with the results. So while they arent likely looking for the end all be all in this video in particular, its the first step into a much larger hobby

@jamesoblivion

6 жыл бұрын

Honing one's creative skills on the cheap can save a lot of costly mistakes when moving on to pricier, more accurate builds. You may look back on the time you spent with projects like these as time wasted, but I'm sure you learned *something* from the experience. These are good starter projects for people who are just getting into the hobby, or those who don't have thousands to put into high end building. Which I think is what most people watching $25 builds are probably looking for.

Looks great but the bunny ears are a little big

@MakeItorBreakItNow

5 жыл бұрын

Charm, agreed. I have another updated version I'm working on, but want to wait on finishing the new lightsaber until I see what Rey has in IX. Thanks for the comment.

... did you just call aluminum “alinimum”?

@MakeItorBreakItNow

4 жыл бұрын

Aaron, most likely, on camera I sometimes says things wrong and leave them in to see if someone notices. You caught me. Thanks for the feedback.

Its not Rey ´s lightsaber Its not Luke ´s lightsaber Not even Anakin ´s lightsaber Its general grievouses lightsaber because it made a fine addition to his collection.

@MakeItorBreakItNow

4 жыл бұрын

Reigameru, thanks for your feedback. always welcome.

could i buy this lightsaber off you for £120

@MakeItorBreakItNow

6 жыл бұрын

Ben, thanks for the offer but its not for sale.

Can you make me one and I can buy it off you

@MakeItorBreakItNow

6 жыл бұрын

Rick, thanks for the offer. At this time I'm not making any extras. If at some point I do I get back with you.

Anakins lightsaber not reys

I will stick with my 3d scanned 3d printed kits for 40$

don't call Rey's lightsaber! It is Anakin's lightsaber / Luke's. Ray used it and a blue used it.

@MakeItorBreakItNow

4 жыл бұрын

BondFreek, thanks for the feedback.